IBM zEnterprise Compatibility Matrix

Use this grid to identify which Broadcom product releases are compatible. If maintenance is required:

• A PTFs section link is provided.
• Use FIXCAT HOLDDATA to identify maintenance that is required to support a hardware device, software, or function.
• If found, select the additional information link that appears under the compatibility status.

Launch Mainframe Compatibility Main Page

The following grid contains a list of all Broadcom mainframe products and releases. The column values include:

Product List

Additional Information

• No information found.

• ASTEX Performance 2.8

  Fix Category: CA.Device.Server.z14-3906

   SP3 + RO86707 + RO90294 + RO98171                                        
      

• Balancing 1.1

  Fix Category: CA.Device.Server.z13-2964

   The following CA LSERV solutions are required for:                       
   z/OS 1.12, z/OS 1.13, z/OS and 1.21:                                     
      LO92174, LO92175,LO92178, and LO92179                                 
  
   HARDWARE/DEVICE COMPATIBILITY:                                           
   There are no known incompatibilities for CA Balancing                    
   with z/OS 1.13.                                                          
  
   SPECIAL INSTRUCTIONS/NOTES:                                              
   For r11 XMS/VTAM, QO86655, QO86662, and QO86664 must be applied          
   to support ALLOWUSERKEY(NO).                                             
  
   These fixes are part of r11.5 XMS/VTAM.                                  
  
   We are not planning to support ALLOWUSERKEYCSA(NO)                       
   for any CA-View or CA-Deliver releases prior to r11.                     
  
   Using the setting of ALLOWUSERKEYCSA(YES) will enable XMS/VTAM regions   
   to function for all releases.                                            
      

• Balancing 1.1

  Fix Category: CA.Device.Server.zEC12-2827

   The following CA LSERV solutions are required for:                       
   z/OS 1.12, z/OS 1.13, z/OS and 1.21:                                     
      LO92174, LO92175,LO92178, and LO92179                                 
  
   HARDWARE/DEVICE COMPATIBILITY:                                           
   There are no known incompatibilities for CA Balancing                    
   with z/OS 1.13.                                                          
  
   SPECIAL INSTRUCTIONS/NOTES:                                              
   For r11 XMS/VTAM, QO86655, QO86662, and QO86664 must be applied          
   to support ALLOWUSERKEY(NO).                                             
  
   These fixes are part of r11.5 XMS/VTAM.                                  
  
   We are not planning to support ALLOWUSERKEYCSA(NO)                       
   for any CA-View or CA-Deliver releases prior to r11.                     
  
   Using the setting of ALLOWUSERKEYCSA(YES) will enable XMS/VTAM regions   
   to function for all releases.                                            
      

• CA 1 Tape Management 12.6

  Fix Category: CA.Device.Server.z16

   CA 1 12.6 is out of support                                              
      

• Compress Data Compression for Db2 3.2

  Fix Category: CA.Device.Server.z13-2964

   APAR RO64830 must be applied to allow the IGVINITGETMAIN trap to be      
   used.                                                                    
      

• Compress Data Compression for Db2 3.2

  Fix Category: CA.Device.Server.zEC12-2827

   APAR RO64830 must be applied to allow the IGVINITGETMAIN trap to be      
   used.                                                                    
      

• Dispatch 11.6

  Fix Category: CA.Device.Server.z15

   Requires CA Dispatch PTF SO00702.                                        
   Requires CA Dispatch Hiper PTF SO01033.'                                 
      

• Dispatch 11.6

  Fix Category: CA.Device.Server.z14-3906

   Requires CA Dispatch PTF SO00702.                                        
   Requires CA Dispatch Hiper PTF SO01033.'                                 
      

• Dispatch 11.7

  Fix Category: CA.Device.Server.z15

   Requires CA Dispatch PTF SO00682.                                        
   Requires CA Dispatch Hiper PTF SO00970.                                  
      

• Dispatch 11.7

  Fix Category: CA.Device.Server.z14-3906

   Requires CA Dispatch PTF SO00682.                                        
   Requires CA Dispatch Hiper PTF SO00970.                                  
      

• Distributed Repository Access System (DRAS

  Fix Category: CA.Device.Server.z15

   Required for Legacy Dispatch 6.0                                         
   Update is dependent on the future certification of CA Dispatch 11.7      
      

• Earl 6.1

  Fix Category: CA.Device.Server.z13-2964

   SPECIAL INSTRUCTIONS/NOTES:                                              
   Apar RO25737 is required to support the use of the                       
   VSM USEZOSV1R9RULES(NO) option.                                          
      

• Earl 6.1

  Fix Category: CA.Device.Server.zEC12-2827

   SPECIAL INSTRUCTIONS/NOTES:                                              
   Apar RO25737 is required to support the use of the                       
   VSM USEZOSV1R9RULES(NO) option.                                          
      

• Gen 8.6

  Fix Category: CA.Device.Server.z16

   Gen 8.6 GA code was compiled to execute in z/Architecture mode ARCH(6).  
  
   Gen 8.6 Upgrade PTFs compiled code targeting z/Architecture mode         
   ARCH(10).                                                                
      

• Gen 8.6

  Fix Category: CA.Device.Server.z15

   Gen 8.6 GA code was compiled to execute in z/Architecture mode ARCH(6).  
  
   Gen 8.6 Upgrade PTFs compiled code targetting z/Architecture mode        
   ARCH(10).                                                                
      

• Gen 8.6

  Fix Category: CA.Device.Server.z14-3906

   Gen 8.6 GA code was compiled to execute in z/Architecture mode ARCH(6).  
  
   Gen 8.6 Upgrade PTFs compiled code targetting z/Architecture mode        
   ARCH(10).                                                                
      

• Gen 8.6

  Fix Category: CA.Device.Server.z13-2964

   Gen 8.6 GA code was compiled to execute in z/Architecture mode ARCH(6).  
  
   Gen 8.6 Upgrade PTFs compiled code targetting z/Architecture mode        
   ARCH(10).                                                                
      

• Gen 8.6

  Fix Category: CA.Device.Server.zEC12-2827

    CA GEN 8.6 code compiled to execute in z/Architecture mode, ARCH(6).    
      

• InterTest and SymDump for CICS 10.0

  Fix Category: CA.Device.Server.z15

   ARCH(12) Compile Option support for IBM Enterprise COBOL and PL/I was    
   added through PTFs SO03670 and SO03671.                                  
      

• InterTest and SymDump for CICS 10.0

  Fix Category: CA.Device.Server.z14-3906

   ARCH(12) Compile Option support for IBM Enterprise COBOL and PL/I was    
   added through PTFs SO03670 and SO03671.                                  
      

• InterTest and SymDump for CICS 11.0

  Fix Category: CA.Device.Server.z16

   z16 instructions support added by LU06741.                               
   Modification done in Common CICS Component (CABAB00).                    
      

• InterTest Batch 10.0

  Fix Category: CA.Device.Server.z14-3906

   ARCH(12) Compile Option support for IBM Enterprise COBOL and PL/I was    
   added through PTFs SO03670 and SO03671.                                  
      

• InterTest Batch 11.0

  Fix Category: CA.Device.Server.z16

   z16 instructions support added by LU06742.                               
   Modification done in InterTest Batch Component (CAMRB00).                
      

• MAINFRAME APPLICATION TUNER 11.0

  Fix Category: CA.Device.Server.z16

   Mainframe Application Tuner version 12 has                               
   been certified with z16 HW.                                              
   Please consider upgrading CA MAT product.                                
      

• MAINFRAME APPLICATION TUNER 11.0

  Fix Category: CA.Device.Server.z15

   CA Mainframe Application Tuner version 12 has                            
   been certified with z15 HW.                                              
   Please consider upgrading CA MAT product.                                
      

• MasterCat VSAM Catalog Management 4.3

  Fix Category: CA.Device.Server.z13-2964

   MASTERCAT does NOT currently support EAV DASD volumes.  Currently we do  
   not have an ETA for this support.                                        
  
   The following PTFs are required:                                         
   RO35715                                                                  
      

• MasterCat VSAM Catalog Management 4.3

  Fix Category: CA.Device.Server.zEC12-2827

   MASTERCAT does NOT currently support EAV DASD volumes.  Currently we do 
   not have an ETA for this support. 
  
   The following PTFs are required: 
   RO35715 
      

• MICS Resource Management 14.2

  Fix Category: CA.Device.Server.z16

   The following link contains compatibility details:                        
  Compatibility
      

• MICS Resource Management 14.2

  Fix Category: CA.Device.Server.z15

   The following link contains compatibility details:                        
  Compatibility
      

• MICS Resource Management 14.2

  Fix Category: CA.Device.Server.z14-3906

   The following link contains compatibility details:                        
  Compatibility
      

• MICS Resource Management 14.2

  Fix Category: CA.Device.Server.z13-2964

   The following link contains compatibility details:                        
  Compatibility
      

• MICS Resource Management 14.2

  Fix Category: CA.Device.Server.zEC12-2827

   The following link contains compatibility details:                        
  Compatibility
      

• MICS Resource Management 14.3

  Fix Category: CA.Device.Server.z16

   The following link contains compatibility details:                        
  Compatibility
      

• MICS Resource Management 14.3

  Fix Category: CA.Device.Server.z15

   The following link contains compatibility details:                        
  Compatibility
      

• MICS Resource Management 14.3

  Fix Category: CA.Device.Server.z14-3906

   The following link contains compatibility details:                        
  Compatibility
      

• MICS Resource Management 14.3

  Fix Category: CA.Device.Server.z13-2964

   The following link contains compatibility details:                        
  Compatibility
      

• MICS Resource Management 14.3

  Fix Category: CA.Device.Server.zEC12-2827

   The following link contains compatibility details:                        
  Compatibility
      

• MICS Resource Management 14.4

  Fix Category: CA.Device.Server.z16

   The following link contains compatibility details:                        
  Compatibility
      

• MICS Resource Management 14.4

  Fix Category: CA.Device.Server.z15

   The following link contains compatibility details:                        
  Compatibility
      

• MICS Resource Management 14.4

  Fix Category: CA.Device.Server.z14-3906

   The following link contains compatibility details:                        
  Compatibility
      

• MICS Resource Management 14.4

  Fix Category: CA.Device.Server.z13-2964

   The following link contains compatibility details:                        
  Compatibility
      

• MICS Resource Management 14.4

  Fix Category: CA.Device.Server.zEC12-2827

   The following link contains compatibility details:                        
  Compatibility
      

• OM Spool 14.0

  Fix Category: CA.Device.Server.z16

   Structures defined in the Coupling Facility for Spool must be            
   resized to 16M.                                                          
      

• Ramis 7.4

  Fix Category: CA.Device.Server.z16

   CA Ramis under CICS is not supported with z/OS 2.4 and above.            
  
   Starting with z/OS 1.9, the default for ALLOWUSERKEYCSA has changed      
   from YES to NO. During startup of the CA Ramis/CICS Interface            
   Starting in z/OS 2.4 ALLOWUSERKEYCSA(YES) is not allowed at all.         
   Control region (R740SCIC) job, the following abend will occur            
  
   IEA705I ERROR DURING GETMAIN SYS CODE = B78                              
      

• Ramis 7.4

  Fix Category: CA.Device.Server.z14-3906

   Starting with z/OS 1.9, the default for ALLOWUSERKEYCSA has changed      
   from YES to NO. During startup of the CA Ramis/CICS Interface            
   Control region (R740SCIC) job, the following abend will occur            
  
       IEA705I ERROR DURING GETMAIN SYS CODE = B78                          
  
   In order to run CA Ramis under CICS, you will need to specify            
   VSM ALLOWUSERKEYCSA(YES) in your SYS1.PARMLIB(DIAGnn) member.            
   You can switch to ALLOWUSERKEYCSA(YES) dynamically if you have           
   another DIAGnn member in SYS1.PARMLIB. To switch, you would              
   enter the following MVS command:                                         
  
       SET DIAG=yy            (yy is the suffix of the new DIAG member)     
      

• Ramis 7.4

  Fix Category: CA.Device.Server.z13-2964

   Starting with z/OS 1.9, the default for ALLOWUSERKEYCSA has changed      
   from YES to NO. During startup of the CA Ramis/CICS Interface            
   Control region (R740SCIC) job, the following abend will occur            
  
       IEA705I ERROR DURING GETMAIN SYS CODE = B78                          
  
   In order to run CA Ramis under CICS, you will need to specify            
   VSM ALLOWUSERKEYCSA(YES) in your SYS1.PARMLIB(DIAGnn) member.            
   You can switch to ALLOWUSERKEYCSA(YES) dynamically if you have           
   another DIAGnn member in SYS1.PARMLIB. To switch, you would              
   enter the following MVS command:                                         
  
       SET DIAG=yy            (yy is the suffix of the new DIAG member)     
      

• Ramis 7.4

  Fix Category: CA.Device.Server.zEC12-2827

   Starting with z/OS 1.9, the default for ALLOWUSERKEYCSA has changed      
   from YES to NO. During startup of the CA Ramis/CICS Interface            
   Control region (R740SCIC) job, the following abend will occur            
  
       IEA705I ERROR DURING GETMAIN SYS CODE = B78                          
  
   In order to run CA Ramis under CICS, you will need to specify            
   VSM ALLOWUSERKEYCSA(YES) in your SYS1.PARMLIB(DIAGnn) member.            
   You can switch to ALLOWUSERKEYCSA(YES) dynamically if you have           
   another DIAGnn member in SYS1.PARMLIB. To switch, you would              
   enter the following MVS command:                                         
  
       SET DIAG=yy            (yy is the suffix of the new DIAG member)     
      

• Remote Console for OS/390 2.3

  Fix Category: CA.Device.Server.z13-2964

   z/OS 2.1, 1.13, 1.12 is supported with CA Remote Console 2.3.3           
   with QO81388.                                                            
      

• Remote Console for OS/390 2.3

  Fix Category: CA.Device.Server.zEC12-2827

   z/OS 2.1, 1.13, 1.12 is supported with CA Remote Console 2.3.3           
   with QO81388.                                                            
      

• RSVP 1.0

  Fix Category: CA.Device.Server.z13-2964

   The following PTFs are required:                                        00000100 
   QO87992, QO75219, QO92563, RO19346, RO19348                             00000200 
      

• RSVP 1.0

  Fix Category: CA.Device.Server.zEC12-2827

   The following PTFs are required:                                        00000100 
   QO87992, QO75219, QO92563, RO19346, RO19348                             00000200 
      

• Scheduler Job Management Smart Console Option 1.1

  Fix Category: CA.Device.Server.z13-2964

   z/OS 2.1, 1.13, 1.12 are supported with CA 7/Smart Console Option        
   release 1.1 genlevel 9808 with LO51334, QO85885, and                     
   QO85889 and RO12125 applied.                                             
  
   HARDWARE/DEVICE COMPATIBILITY:                                           
   There are no known incompatibilities for CA 7/Smart Console Option       
   with z/OS 2.1, 1.13, and 1.12.                                           
  
   SPECIAL INSTRUCTIONS/NOTES:                                              
   Possible workarounds include using NIP messages that appear later        
   in the IPL Lprocess, this may be different for each implementation.      
  
   Starting with z/OS 1.9, the default for ALLOWUSERKEYCSA has changed      
   from YES to NO.  During initialization of CA 7/Smart Console, the        
   following abend will occur:                                              
  
       IEA705I ERROR DURING GETMAIN SYS CODE = B78-5C                       
  
   In order to run CA 7/Smart Console, you will need to specify             
   VSM ALLOWUSERKEYCSA(YES) in your SYS1.PARMLIB(DIAGnn) member.            
  
   You can switch to ALLOWUSERKEYCSA(YES) dynamically if you have           
   another DIAGnn member in SYS1.PARMLIB. To switch, you would enter        
   the following MVS command:                                               
       SET DIAG=yy            (yy is the suffix of the new DIAG member)     
      

• Scheduler Job Management Smart Console Option 1.1

  Fix Category: CA.Device.Server.zEC12-2827

   z/OS 2.1, 1.13, 1.12 are supported with CA 7/Smart Console Option        
   release 1.1 genlevel 9808 with LO51334, QO85885, and                     
   QO85889 and RO12125 applied.                                             
  
   HARDWARE/DEVICE COMPATIBILITY:                                           
   There are no known incompatibilities for CA 7/Smart Console Option       
   with z/OS 2.1, 1.13, and 1.12.                                           
  
   SPECIAL INSTRUCTIONS/NOTES:                                              
   Possible workarounds include using NIP messages that appear later        
   in the IPL Lprocess, this may be different for each implementation.      
  
   Starting with z/OS 1.9, the default for ALLOWUSERKEYCSA has changed      
   from YES to NO.  During initialization of CA 7/Smart Console, the        
   following abend will occur:                                              
  
       IEA705I ERROR DURING GETMAIN SYS CODE = B78-5C                       
  
   In order to run CA 7/Smart Console, you will need to specify             
   VSM ALLOWUSERKEYCSA(YES) in your SYS1.PARMLIB(DIAGnn) member.            
  
   You can switch to ALLOWUSERKEYCSA(YES) dynamically if you have           
   another DIAGnn member in SYS1.PARMLIB. To switch, you would enter        
   the following MVS command:                                               
       SET DIAG=yy            (yy is the suffix of the new DIAG member)     
      

• SOLVE:Access Session Management 5.0

  Fix Category: CA.Device.Server.z13-2964

   z13 related PTFs are:                                                    
   > RO83229 for FMID CC2D670 - compatibility for Minute Minder             
      

• Teleview for OS/390 4.4

  Fix Category: CA.Device.Server.z16

   CA Teleview Session Management for z/OS IS EOS and will not be           
   tested with new hardware.                                                
   Contact your CA Account representative to find out more about a          
   migration program to CA TPX Session Management for z/OS r5.4.            
      

• Teleview for OS/390 4.4

  Fix Category: CA.Device.Server.z15

   CA Teleview Session Management for z/OS has been Stabilized.             
   Contact your CA Account representative to find out more about a          
   migration program to CA TPX Session Management for z/OS r5.4.            
      

• TLMS Tape Management 12.6

  Fix Category: CA.Device.Server.z16

   TLMS 12.6 is scheduled for EOS on September 30                           
      

• Ucandu 3.3

  Fix Category: CA.Device.Server.z16

   Ucandu 3.3 is EOS so it will not be certified on this hardware.          
      

• Vantage Storage Resource Manager 12.6

  Fix Category: CA.Device.Server.z15

   CA Vantage Storage Resource Manager 12.6 - EOS 15 JUN 2018               
      

• VISION:Builder 15.0

  Fix Category: CA.Device.Server.z14-3906

   The following APAR is required:                                          
     APAR RO91749 ( INCREASED CPU USAGE ON Z/13 )                           
      

• VISION:Builder 15.0

  Fix Category: CA.Device.Server.z13-2964

   The following APAR is required:                                          
     APAR RO91749 ( INCREASED CPU USAGE ON Z/13 )                           
      

• VISION:Inform 4.0

  Fix Category: CA.Device.Server.z16

   This product is End of Life (EOL) and compatability testing has been     
   curtailed.                                                               
  
      

• VISION:Inquiry 6.5

  Fix Category: CA.Device.Server.z16

   This product is End of Life (EOL) and compatability testing has been     
   curtailed.                                                               
  
      

• VISION:Inquiry Interface to Db2 6.5

  Fix Category: CA.Device.Server.z16

   This product is at End of Life (EOL) and is not supported on this versio 
      

• VISION:Report 16.1

  Fix Category: CA.Device.Server.z14-3906

   The following APAR is required:                                          
    APAR RO88567 ( INCREASED CPU USAGE ON Z/13 )                            
    APAR RO93244 ( GETTING U3333 / INTERNAL LOGIC ERROR )                   
      

• VISION:Report 16.1

  Fix Category: CA.Device.Server.z13-2964

   The following APAR is required:                                          
    APAR RO88567 ( INCREASED CPU USAGE ON Z/13 )                            
    APAR RO93244 ( GETTING U3333 / INTERNAL LOGIC ERROR )                   
      

• VISION:REPORT INTERFACE TO Db2 16.1

  Fix Category: CA.Device.Server.z13-2964

   The following APAR is required:                                          
    APAR RO88567 ( INCREASED CPU USAGE ON Z/13 )                            
    APAR RO93244 ( GETTING U3333 / INTERNAL LOGIC ERROR )                   
      

• VISION:Results 6.0

  Fix Category: CA.Device.Server.z13-2964

   The following APARs are required:                                        
   APAR QO92631 ( S0C2 ABEND UNDER Z/OS 1.9 )                               
   APAR RO05111 ( SC03 ABEND USING PDS PROCESSING DURING A RESTORE )        
   APAR RO55926 ("UNINITIALIZED OBTAINED STORAGE RESULTS IN ABENDS")        
   APAR RO64756 ( U0299 S0C1 IN FVPF )                                      
      

• VISION:Results 6.0

  Fix Category: CA.Device.Server.zEC12-2827

   The following APARs are required:                                        
   APAR QO92631 ( S0C2 ABEND UNDER Z/OS 1.9 )                               
   APAR RO05111 ( SC03 ABEND USING PDS PROCESSING DURING A RESTORE )        
   APAR RO55926 ("UNINITIALIZED OBTAINED STORAGE RESULTS IN ABENDS")        
   APAR RO64756 ( U0299 S0C1 IN FVPF )                                      
      

• VISION:Transact 7.8

  Fix Category: CA.Device.Server.z16

   This product is End of Life (EOL) and compatability testing has been     
   curtailed.                                                               
  
      

• VISION:Two 15.0

  Fix Category: CA.Device.Server.z14-3906

   The following APAR is required:                                          
     APAR RO91749 ( INCREASED CPU USAGE ON Z/13 )                           
      

• VISION:Two 15.0

  Fix Category: CA.Device.Server.z13-2964

   The following APAR is required:                                          
     APAR RO91749 ( INCREASED CPU USAGE ON Z/13 )                           
      

Required PTF(s)

• ACF2 for z/OS 16.0

  Fix Category: CA.Device.Server.z14-3906

  ACF2 for z/OS (CAX1G00)

  • RO95218

• Dispatch 11.7

  Fix Category: CA.Device.Server.z14-3906

  Dispatch (CADSB72)

  • SO00682 SO00970

• CA 7 11.3

  Fix Category: CA.Device.Server.z13-2964

  CA 7 (CAL2B30)

  • RO88143 RO92743

• CA 7 11.3

  Fix Category: CA.Device.Server.zEC12-2827

  CA 7 (CAL2B30)

  • RO92743

• CA 7 12.0

  Fix Category: CA.Device.Server.z13-2964

  CA 7 (CAL2C00)

  • RO92828 RO94462

• CA 7 12.0

  Fix Category: CA.Device.Server.zEC12-2827

  CA 7 (CAL2C00)

  • RO92828 RO94462

• Common Components and Services for z/OS 15.0

  Fix Category: CA.Device.Server.z16

  Resource Initialization Manager(Comm) (CAS9F00)

  • LU05666 LU09769

• Common Components and Services for z/OS 15.0

  Fix Category: CA.Device.Server.z15

  Resource Initialization Manager(Comm) (CAS9F00)

  • SO10253 SO15509

• Compliance Event Manager 6.0

  Fix Category: CA.Device.Server.z14-3906

  COMPLIANCE EVENT MANAGER (CCEM600)

  • RO98165

• Allocate DASD Space and Placement 12.5

  Fix Category: CA.Device.Server.zEC12-2827

  Allocate DASD Space and Placement (CCTVC50)

  • RO50160

• Database Management Solutions for Db2 for z/OS 20.0

  Fix Category: CA.Device.Server.z14-3906

  Chorus DBA Services (CEU9K00)

  • SO06111

  SYSVIEW Performance Management Option for Db2 for z/OS (CIDBK00)

  • SO06112

  Db2 Common Components (CINSK00)

  • SO06113 SO09022

  Object Framework Services for Db2 (COFSK00)

  • SO06114

  Database Analyzer for Db2 for z/OS (CPDAK00)

  • SO06115 SO09023

  Detector for Db2 for z/OS (CPDTK00)

  • SO06116

  Fast Load for Db2 for z/OS (CPFLK00)

  • SO06117 SO09024

  Fast Unload for Db2 for z/OS (CPFUK00)

  • SO06118 SO09025

  Log Analyzer for Db2 for z/OS (CPLAK00)

  • SO06119

  Plan Analyzer for Db2 for z/OS (CPPAK00)

  • SO06120

  Recovery Analyzer for Db2 for z/OS (CPRAK00)

  • SO06121

  Compile/PRF (CPRFK00)

  • SO06122

  Report Facility for Db2 for z/OS (CPRFK01)

  • SO06123

  Report Facility for Db2 for z/OS (CPRFK02)

  • SO06124

  Rapid Reorg for Db2 for z/OS (CPRRK00)

  • SO06125 SO09026

  Subsystem Analyzer for Db2 for z/OS (CPSAK00)

  • SO01635 SO06126

  Utilities Common (CPUTK00)

  • SO06127 SO09027

  RC/Query for Db2 for z/OS (CRCQK00)

  • SO06128

  RC/Secure for Db2 for z/OS (CRCSK00)

  • SO06129

  RC/Update for Db2 for z/OS (CRCUK00)

  • SO06130

  RC/Extract for Db2 for z/OS (CRCXK00)

  • SO06131

  Utility General Recovery (CUGRK00)

  • SO06132 SO09028

• InterTest Batch 11.0

  Fix Category: CA.Device.Server.z14-3906

  InterTest Batch (CAMRB00)

  • SO01927

• InterTest and SymDump for CICS 11.0

  Fix Category: CA.Device.Server.z15

  InterTest for CICS (CABAB00)

  • SO01925 SO12157 SO13956

  SymDump for CICS (CABQB00)

  • SO01926

  InterTest for CICS - Breakpoint Component (CCSAB00)

  • SO01931

• InterTest and SymDump for CICS 11.0

  Fix Category: CA.Device.Server.z14-3906

  InterTest for CICS (CABAB00)

  • SO01925

  SymDump for CICS (CABQB00)

  • SO01926

  InterTest for CICS - Breakpoint Component (CCSAB00)

  • SO01931

• JMR 4.6

  Fix Category: CA.Device.Server.z13-2964

  JMR - JOBLOG Management & Retrieval (CPK4600)

  • RO95302

• SYSVIEW Performance Management 14.1

  Fix Category: CA.Device.Server.z14-3906

  SYSVIEW (CNM4E10)

  • RO90920

• SYSVIEW Performance Management 14.1

  Fix Category: CA.Device.Server.z13-2964

  SYSVIEW (CNM4E10)

  • RO90920

• SYSVIEW Performance Management 14.2

  Fix Category: CA.Device.Server.z15

  SYSVIEW (CNM4E20)

  • SO10621

• SYSVIEW Performance Management 15.0

  Fix Category: CA.Device.Server.z16

  SYSVIEW Performance Management (CNM4F00)

  • LU05778

• SYSVIEW Performance Management 15.0

  Fix Category: CA.Device.Server.z15

  SYSVIEW Performance Management (CNM4F00)

  • SO10611

• SYSVIEW Performance Management 16.0

  Fix Category: CA.Device.Server.z16

  SYSVIEW Performance Management (CNM4G00)

  • LU05777

• SYSVIEW Performance Management 16.0

  Fix Category: CA.Device.Server.z15

  SYSVIEW Performance Management (CNM4G00)

  • SO10588 SO11632

• NetMaster Network Management Suite 12.2

  Fix Category: CA.Device.Server.z15

  NetMaster Network Management for TCP/IP (CC11C20)

  • SO10322

  NetMaster Management Services (CC2D811)

  • SO04787

• NetMaster Network Management Suite 12.2

  Fix Category: CA.Device.Server.z14-3906

  NetMaster Network Management for TCP/IP (CC11C20)

  • SO10322

  NetMaster Management Services (CC2D811)

  • SO04787

• SOLVE:Access Session Management 5.0

  Fix Category: CA.Device.Server.z13-2964

  Unicenter NetMaster Management Services (CC2D670)

  • RO83229 RO88725

• SOLVE:Operations Automation 11.9

  Fix Category: CA.Device.Server.z13-2964

  Unicenter NetMaster Management Services (CC2D710)

  • RO61578 RO88525

• Top Secret for z/OS 16.0

  Fix Category: CA.Device.Server.z14-3906

  Top Secret for z/OS (CAKOG00)

  • RO95981 RO99005

• Mainframe Operational Intelligence 1.0

  Fix Category: CA.Device.Server.z14-3906

  Operational Intelligence Platform (CFGE100)

  • RO97940