Reason:
This message is written to the JESMSGLG every time a transformation request completes if X2YY_TRACE=MIN/ALL specified. The message includes CA Spool file number or zero, CA View report name generation number, sequence number, type of transformation, transform, or copy info and request elapse time.
Action:
None.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Report data for the report are not available because the report is no longer in the database. The report was most likely expired from the database by the backup cycle or deleted by another user.
Action:
If the report was accidentally expired or deleted, consult your system programming group to have the report added back into the database.
Reason:
The report data for the report cannot be accessed for the requested report because the logical view for the report is no longer in the database. The logical view was most likely deleted by another user.
Action:
Access the report data for the report again.
Reason:
The SARSECUX security user exit or external security did not allow access to the requested report.
Action:
Consult with your security administrator or system programming group to determine the reasons why the authorization was not provided.
Reason:
The user does not have authorization to access all page of the report and must use cross-report indexing to access individual pages of the report.
Action:
Use cross-report indexing to access pages of the report.
Reason:
The report cannot be accessed from tape because the Expanded Access Server (EAS) task is not active on the same system as CA DRAS.
Action:
Start and run the EAS task on the same system as CA DRAS. After the task has been started, the report can be accessed from CA DRAS.
Reason:
The SARSECUX security user exit or external security did not allow access the logical view of the requested report.
Action:
Consult with your security administrator or system programming group to determine the reasons why the authorization was not provided.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Report data for the report is not available because the report is no longer in the database. The report was most likely expired from the database by the backup cycle or deleted by another user.
Action:
If the report was accidentally expired or deleted, consult your system programming group to have the report added back into the database.
Reason:
The report data cannot be accessed for the requested report because the logical view for the report is no longer in the database. The logical view was most likely deleted by another user.
Action:
Access the report data for the report again.
Reason:
The SARSECUX security user exit or external security did not allow access to the requested report.
Action:
Consult with your security administrator or system programming group to determine the reasons why the authorization was not provided.
Reason:
The report data cannot be accessed for the requested report because the report index for the report is no longer in the database. The report index for the report is not accessible or has been deleted by another user.
Action:
Access the report data for the report again.
Reason:
The SARSECUX security user exit or external security did not allow access to the report index of the requested report.
Action:
Consult with your security administrator or system programming group to determine the reasons why the authorization was not provided.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Internal informational message indicating that all qualified report records have been retrieved.
Action:
None. This message is informational.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
A recall request has been issued for the requested report to have the report loaded from tape to disk.
Action:
None. This message is informational.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
The user definition cannot be found in the database. The user definition was most likely deleted by another user.
Action:
If you are changing your own mode or distribution identifier, log off and log on again to the CA OM Document Viewer.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
The user definition cannot be updated because the password contains invalid characters.
Action:
Enter a new password and retry the request.
Reason:
The user definition cannot be added to the database because the user definition exists. The user definition was most likely added by another user.
Action:
Attempt to add or update the user definition again. For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
The user definition cannot be added or updated because the master authority field contains invalid characters.
Action:
Contact CA Technical Support.
Reason:
The user definition cannot be updated because the distribution mask field contains invalid characters.
Action:
Enter a valid distribution mask and retry the request.
Reason:
The user definition cannot be updated because the distribution identifier field contains invalid characters.
Action:
Enter a valid distribution identifier and retry the request.
Reason:
The user definition cannot be updated because the distribution identifier field does not conform to the distribution mask pattern.
Action:
Enter a valid distribution identifier and retry the request.
Reason:
The user definition cannot be added or updated because the access mode contains invalid characters.
Action:
Contact CA Technical Support.
Reason:
The user definition cannot be added or updated because the mode field contains an invalid specification.
Action:
Contact CA Technical Support.
Reason:
The user definition cannot be added or updated because the user is not allowed access to the specified mode.
Action:
Enter a valid accessible mode and retry the request.
Reason:
The user definition cannot be added or updated because the banner page name contains invalid characters.
Action:
Enter a valid banner page name and retry the request.
Reason:
The user definition cannot be added or updated because the language code is not valid.
Action:
Enter a valid language code and retry the request.
Reason:
The user definition cannot be added or updated because the printer name contains invalid characters.
Action:
Enter a valid printer name and retry the request.
Reason:
The user definition cannot be added because the userid was not specified.
Action:
Enter a userid and retry the request.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Internal informational message indicating that all qualified logical view records have been retrieved.
Action:
None. This message is informational.
Reason:
Logical views for the report are not available because the report is no longer in the database. The report was most likely expired from the database by the backup cycle or deleted by another user.
Action:
If the report was accidentally expired or deleted, consult your system programming group to have the report added back into the database.
Reason:
An attempt is made to retrieve the logical views for a report, but no logical views are defined for the report.
Action:
None. Only the native view of the report is accessible.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Internal informational message indicating that all qualified index records have been retrieved.
Action:
None. This message is informational.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Internal informational message indicating that all qualified index records have been retrieved.
Action:
None. This message is informational.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
A filtering specification contains text that is longer than what is defined for the index.
Action:
Enter new filtering text and retry the selection request.
Reason:
No reports or indexing information found in the database for the selected cross report index name and filtering criteria.
Action:
Select another cross report index name or change the filtering criteria.
Reason:
Indexing data for the report is not available because the report is no longer in the database. The report was most likely expired from the database by the backup cycle or deleted by another user.
Action:
If the report was accidentally expired or deleted, consult your system programming group to have the report added back into the database.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
The requested report does not contain any indexing data or has not been indexed.
Action:
If the report contains logical views with indexing criteria, the report can be indexed by the SARBCH utility.
Reason:
Indexing data cannot be accessed for the requested report because the logical view for the report is no longer in the database. The logical view was most likely deleted by another user.
Action:
Access the report data for the report again.
Reason:
The report cannot be accessed from tape because the Expanded Access Server (EAS) task is not active on the same system as CA DRAS.
Action:
Start and run the EAS task on the same system as CA DRAS. After the task has been started, the report can be accessed from CA DRAS.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Indexing data for the report is not available because the report is no longer in the database. The report was most likely expired from the database by the backup cycle or deleted by another user.
Action:
If the report was accidentally expired or deleted, consult your system programming group to have the report added back into the database.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
A filtering specification contains text that is longer than what is defined for the index.
Action:
Enter new filtering text and retry the selection request.
Reason:
The requested report does not contain any indexing data or has not been indexed.
Action:
If the report contains logical views with indexing criteria, the report can be indexed by the SARBCH utility.
Reason:
Indexing data for the requested report cannot be found.
Action:
If the report contains logical views with indexing criteria, the report can be indexed by the SARBCH utility.
Reason:
Indexing data cannot be accessed for the requested report because the logical view for the report is no longer in the database. The logical view was most likely deleted by another user.
Action:
Access the report data for the report again.
Reason:
The SARSECUX security user exit or external security did not allow access to the report index of the requested report.
Action:
Consult with your security administrator or system programming group to determine the reasons why the authorization was not provided.
|
Copyright © 2013 CA.
All rights reserved.
|
|