This section contains the following topics:
This section describes error messages that are associated with CA View.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
The annotation or bookmark cannot be deleted because it is not found in the database. Most likely, another user deleted the annotation or bookmark.
Action:
Access the annotation list or the specific annotation again to refresh the display with current information.
Reason:
The SARSECUX security user exit or external security did not allow deletion of the annotation or bookmark for the requested report.
Action:
Consult with your security administrator or system programming group to determine the reasons why the authorization was not provided.
Reason:
An internal informational message indicating that all qualified table entries have been retrieved.
Action:
None. This message is informational.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
The annotation or bookmark cannot be added for the requested report because the report is no longer in the database. The report was most likely expired from the database by the backup cycle or deleted by another user.
Action:
If the report was accidentally expired or deleted, consult your system programming group to have the report added back into the database.
Reason:
The annotation or bookmark cannot be added for the requested report because the logical view for the report is no longer in the database. The logical view was most likely deleted by another user.
Action:
Access the report data for the report again to refresh display information.
Reason:
The SARSECUX security user exit or external security did not allow addition of the annotation or bookmark for the requested report.
Action:
Consult with your security administrator or system programming group to determine the reasons why the authorization was not provided.
Reason:
The annotation or bookmark cannot be added for the requested report because the report index for the report is no longer in the database. The report index for the report is not accessible or has been deleted by another user.
Action:
Access the report data for the report again to refresh display information.
Reason:
The annotation or bookmark cannot be added because a note type was not provided or it is invalid.
Action:
Contact CA Technical Support.
Reason:
The annotation or bookmark cannot be added because a note name was not provided or it contains invalid characters. The annotation or bookmark name can consist of alphabetic, numeric, national, and selective special characters.
Action:
Provide a valid annotation or bookmark name before adding annotation or bookmark.
Reason:
The annotation or bookmark cannot be added because the page or line number on the report where the note is to be attached was not provided or it is invalid.
Action:
Contact CA Technical Support.
Reason:
The annotation or bookmark cannot be added because an access type was not provided or it is invalid.
Action:
Contact CA Technical Support.
Reason:
The annotation cannot be added because annotation text was not provided.
Action:
Provide annotation text before adding the annotation.
Reason:
The annotation or bookmark cannot be added because the database contains too many annotations or bookmarks with the same name.
Action:
Provide a different annotation or bookmark name before adding the annotation or bookmark.
Reason:
An annotation or bookmark with the same name has been assigned to a different page or line number.
Action:
The annotation or bookmark can be added at the other page and line number. If this is not wanted, provide a new annotation or bookmark name before adding the annotation or bookmark.
Reason:
The annotation or bookmark cannot be added because the page or line number on the report where the note is to be attached was not provided. This message can occur after allowing an annotation or bookmark to be added on a different page or line number.
Action:
Try adding the annotation. If the problem persists, contact Technical Support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
The list of annotations or bookmarks cannot be accessed for the requested report because the report is no longer in the database. The report was most likely expired from the database by the backup cycle or deleted by another user.
Action:
If the report was accidentally expired or deleted, consult your system programming group to have the report added back into the database.
Reason:
The list of annotations or bookmarks cannot be accessed for the requested report because the logical view for the report is no longer in the database. The logical view was most likely deleted by another user.
Action:
Access the report data for the report again to refresh display information.
Reason:
The SARSECUX security user exit or external security did not allow access to the requested report.
Action:
Consult with your security administrator or system programming group to determine the reasons why the authorization was not provided.
Reason:
The list of annotations or bookmarks cannot be accessed for the requested report because the report index for the report is no longer in the database. The report index for the report is not accessible or has been deleted by another user.
Action:
Access the report data for the report again to refresh display information.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
The annotation or bookmark cannot be updated because it is not found in the database. The annotation or bookmark was most likely deleted by another user.
Action:
Access the annotation list or the specific annotation again to refresh the display with current information.
Reason:
The SARSECUX security user exit or external security did not allow the update of the annotation or bookmark for the requested report.
Action:
Consult with your security administrator or system programming group to determine the reasons why the authorization was not provided.
Reason:
The annotation or bookmark cannot be updated because an access type was not provided or it is invalid.
Action:
Contact CA Technical Support.
Reason:
The annotation or bookmark cannot be updated because the page or line number on the report where the note is to be attached was not provided or it is invalid.
Action:
Contact CA Technical Support.
Reason:
The annotation or bookmark cannot be updated because the database contains too many annotations or bookmarks with the same name.
Action:
Provide a different annotation or bookmark name before adding the annotation or bookmark.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Internal informational message indicating that all qualified table entries have been retrieved.
Action:
None. This message is informational.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
No cross report indexes are found in the database for the requested filtering criteria.
Action:
Provide new filtering data before selecting cross report indexes.
Reason:
The distribution ID referenced in the CA View User Profile is not defined, nor has no reports defined. For EXP mode users, the DISTID and applicable reports are defined in CA Deliver. For SAR mode users, the DISTID and applicable reports are defined in CA View.
Action:
To produce lists of reports for the user, reports must be defined to the associated DISTID with CA Deliver (for EXP mode users) or CA View (for SAR mode users).
Reason:
The library containing the RMOGAM module is not defined to the CA DRAS task, or is not accessible.
Action:
Add the CA Deliver load library to the STEPLIB or JOBLIB concatenation to the CA DRAS job or started task, or add the CA Deliver load library to your system linklist.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
A user tried to access a CA View database that has not been initialized.
Action:
Initialize the database using the SARINIT utility.
Reason:
The SARUSDUX user exit cannot be found.
Action:
Check your STEPLIB or linklist to ensure that the library containing SARUSDUX is available.
Reason:
The library containing the SARSECUX module is not defined to the CA DRAS task or is not accessible.
Action:
Add the CA View load library to the STEPLIB or JOBLIB concatenation for the CA DRAS job or started task, or add the CA View load library to your system Linklist.
Reason:
A logon is attempted without a user ID.
Action:
Retry with valid user ID.
Reason:
A logon is attempted with an invalid password.
Action:
Retry with the correct password for the user ID.
Reason:
A logon is attempted with a user ID that is not defined to the system.
Action:
Retry with a valid user ID or call your Security Administrator.
Reason:
User does not have clearance for the database.
Action:
Contact your Security Administrator.
Reason:
The database and the software are at different releases.
Action:
Verify the STEPLIB or link listed version of the programs.
Reason:
The library containing the SARDVECT module is not defined to the CA DRAS task or is not accessible.
Action:
Add the CA View load library to the STEPLIB or JOBLIB concatenation for the CA DRAS job or started task, or add the CA View load library to your system Linklist.
Reason:
The SARDVECT program cannot be found.
Action:
Check your STEPLIB or linklist to make sure that the library containing SARDVECT is available.
Reason:
Internal informational message indicating that all qualified report records have been retrieved.
Action:
None. This message is informational.
Reason:
An internal request is made to position to an invalid record in the report index file.
Action:
The database record for the report contains an invalid starting position for the extracted report index data. This condition is due to database corruption. The positioning information can be re-established by re-indexing the report.
Reason:
An I/O error occurred while attempting to read index data for the referenced report.
Action:
The I/O error can be corrected by re-indexing the report. If problems persist, the database can be restored.
Reason:
The identified report is not accessible using the expanded access server, or online viewing of the report is not allowed due to the specification of the VIEWTAPE=NO ERO parameter.
Action:
If the report is accessible using the expanded access server, make sure that the SAREAS task is active. Otherwise, load the report into the database that is to be accessed.
Reason:
An I/O error occurred while attempting to read index data for the referenced report.
Action:
The I/O error can be corrected by re-indexing the report. If problems persist, the database can be restored.
Reason:
An I/O error occurred while attempting to read index data for the referenced report.
Action:
The I/O error can be corrected by re-indexing the report. If problems persist, the database can be restored.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Internal informational message indicating that all qualified report resource records have been retrieved.
Action:
None. This message is informational.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
The report that you have requested needs a resource to display correctly. This resource cannot be found on the database. (Acif and Xerox reports have resources.)
Action:
Reload report from tape.
Reason:
The report that you have requested needs a resource to display correctly. This resource cannot be found on the database. (Acif and Xerox reports have resources.)
Action:
Reload report from tape.
Reason:
Internal informational message indicating that all qualified report records have been retrieved.
Action:
None. This message is informational.
Reason:
An internal request is made to position to an invalid record in the report.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
An internal request is made to position to an invalid page in the report.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
The identified report is not accessible using the expanded access server, or online viewing of the report is not allowed due to the specification of the VIEWTAPE=NO ERO parameter
Action:
If the report is accessible using the expanded access server, make sure that the SAREAS task is active. Otherwise, load the report into the database that is to be accessed.
Reason:
Internal informational message indicating that all qualified report information records have been retrieved.
Action:
None. This message is informational.
Reason:
List information for the report is not available because the report is no longer in the database. The report was most likely expired from the database by the backup cycle or deleted by another user.
Action:
If the report was accidentally expired or deleted, consult your system programming group to have the report added back into the database.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
The SARSECUX security user exit or external security did not allow access to the requested report.
Action:
Consult with your security administrator or system programming group to determine the reasons why the authorization was not provided.
Reason:
List information for the report is not available because the report is no longer in the database. The report was most likely expired from the database by the backup cycle or deleted by another user.
Action:
If the report was accidentally expired or deleted, consult your system programming group to have the report added back into the database.
Reason:
An internal request is made to position to an invalid page in the report.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
The distribution ID referenced in the CA View user profile is not defined nor has no reports that are defined to it. For EXP mode users, the DISTID and applicable reports are defined in CA Deliver. For SAR mode users, the DISTID and applicable reports are defined in CA View.
Action:
To produce lists of reports for the user, reports must be defined to the associated DISTID with CA Deliver (for EXP mode users) or CA View (for SAR mode users).
Reason:
The library containing the RMOGAM module is not defined to the CA DRAS task or is not accessible.
Action:
Add the CA Deliver load library to the STEPLIB or JOBLIB concatenation for the CA DRAS job or started task, or add the CA Deliver load library to your system linklist.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Internal informational message indicating that all qualified index name records have been retrieved.
Action:
None. This message is informational.
Reason:
Index names for the report are not available because the report is no longer in the database. The report was most likely expired from the database by the backup cycle or deleted by another user.
Action:
If the report was accidentally expired or deleted, consult your system programming group to have the report added back into the database.
Reason:
An attempt is made to retrieve the indexes for a report, but the report is not indexed.
Action:
None. Only the native view of the report is accessible.
Reason:
The report cannot be accessed from tape because the Expanded Access Server (EAS) task is not active on the same system as CA DRAS.
Action:
Start and run the EAS task on the same system as CA DRAS. After the task has been started, the report can be accessed from CA DRAS.
Reason:
Index names for the report are not available because the report is no longer in the database. The report was most likely expired from the database by the backup cycle or deleted by another user.
Action:
If the report was accidentally expired or deleted, consult your system programming group to have the report added back into the database.
Reason:
An attempt is made to retrieve the indexes for a report, but the report is not indexed.
Action:
None. Only the native view of the report is accessible.
Reason:
Internal informational message indicating that all qualified report resource records have been retrieved.
Action:
None. This message is informational.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Resource data for the report are not available because the report is no longer in the database. The report was most likely expired from the database by the backup cycle or deleted by another user.
Action:
If the report was accidentally expired or deleted, consult your system programming group to have the report added back into the database.
Reason:
No resource data is found for the requested report.
Action:
None. This message is informational.
Reason:
The SARSECUX security user exit or external security did not allow access to the requested report.
Action:
Consult with your security administrator or system programming group to determine the reasons why the authorization was not provided.
Reason:
Internal informational message indicating that all qualified report records have been retrieved.
Action:
None. This message is informational.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Internal informational message indicating that all qualified report records have been retrieved.
Action:
None. This message is an informational.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
Reason:
Internal informational message indicating that all qualified report records have been retrieved.
Action:
None. This message is informational.
Reason:
Logic error with inter-connection of internal product routines.
Action:
For assistance, contact Technical Support at http://ca.com/support.
|
Copyright © 2013 CA.
All rights reserved.
|
|