Installation and Upgrade Guides › Policy Server Installation Guide › Unattended Installation › How to Run an Unattended Report Server Install

How to Run an Unattended Report Server Install

To run an unattended Administrative UI install, complete the following procedures:

1. Review the installation checklists.
2. Gather the required information for the installer.
3. Review the guidelines for silent installation.
4. Locate the Report Server response file and CA SiteMinder® Report Server Configuration Wizard properties file.
5. Copy the response and properties files to a temporary location on the Report Server host system.
6. Copy the Report Server and the CA SiteMinder® Report Server Configuration Wizard installation media to a temporary location on the Report Server host system.

   Note: You can download the installation media from the Technical Support site.

7. Modify the Report Server response file.
8. Modify the CA SiteMinder® Report Server Configuration Wizard properties file.
9. Run the Report Server installer.
10. Run the CA SiteMinder® Report Server Configuration Wizard.
11. Register the Report Server.

Modify the Report Server Response File for Windows

You modify the installer response file to define installation variables. The default values reflect the information that was entered when a Report Server was installed and a response file was saved.

Important! Consider the following items before you modify the file:

• Some of the parameters identify the type of database that is to function as the report (cms) database. Do not use the properties file to change the type of database that the installer is to configure. To change the report database type, use the installer to create another properties file.
• Passing a parameter in the command line overrides the respective setting in the response file.
• The installer generates some parameters automatically. Do not modify the following parameters:
  • DATABASECONNECT
  • DATACONNECTION
  • DATABASE_AUDIT_CONNSVR
  • INSTALLDBTYPE
  • INSTALL_DB_TYPE
  • INSTALLLEVEL
  • INSTALLSWITCH
  • NEWCMSPASSWORD
  • PRIVILEGED
  • SINGLESERVER
  • SKIP_DEPLOYMENT
  • WCADOTNETINSTALL
  • WCAJAVAINSTALL
  • WCATOMCATINSTALL
  • WDEPLOY_LANGUAGES
  • WDEPLOY_LATER
  • WEBSITE_METABASE_NUMBER
  • WEBSITE_PORT
  • ADDSOURCE
  • ADVERTISE

Install

This section details the parameters in the Install section of the response file.

AS_ADMIN_IS_SECURE

Specifies that an administrator credential must be passed to access the web application server.

CA SiteMinder® setting: Leave the value empty. This parameter applies to a web application server that CA SiteMinder® does not support.

AS_ADMIN_PASSWORD

Specifies the password of the administrator account that accesses the web application server. If the embedded version of Apache Tomcat is installed, the value of this parameter is empty. CA SiteMinder® only supports the embedded version of Apache Tomcat.

CA SiteMinder® setting: Leave the value empty.

AS_ADMIN_PORT

Specifies the port on which the web application server is listening. If the embedded version of Apache Tomcat is installed, the value defaults to 8080. CA SiteMinder® only supports the embedded version of Apache Tomcat.

CA SiteMinder® setting: 8080

Be sure that this value matches the value of TOMCAT_CONNECTION_PORT.

AS_ADMIN_USERNAME

Specifies the account name of the administrator account that is used to access the web application server. If the embedded version of Apache Tomcat is installed, the value defaults to the following value:

admin

CA SiteMinder® only supports the embedded version of Apache Tomcat.

CA SiteMinder® setting: admin

AS_DIR

Specifies the path to which the embedded version of Apache Tomcat is installed. The path is automatically set using the installation directory.

Note: Be sure that you escape the backslashes in the path with a backslash character.

Example: "C:\\Program Files\\CA\\SC\\CommonReporting3\\Tomcat55"

AS_INSTANCE

Specifies the name of the web application server instance. If the embedded version of Apache Tomcat is installed, the value defaults to localhost. CA SiteMinder® only supports the embedded version of Apache Tomcat.

CA SiteMinder® setting: localhost

AS_SERVER

Specifies the type of Java web application server to deploy. If the embedded version of Apache Tomcat is installed, the value defaults to tomcat55. CA SiteMinder® only supports the embedded version of Apache Tomcat.

CA SiteMinder® setting: tomcat55

AS_SERVICE_NAME

If the web application server is installed as a service on Windows, specifies the name of the service. If the embedded version of Apache Tomcat is installed, the value defaults to the following value:

BOE120Tomcat

CA SiteMinder® only supports the embedded version of Apache Tomcat.

CA SiteMinder® setting: BOE120Tomcat

AS_VIRTUAL_HOST

If you are deploying the Report Server to a virtualized environment, specifies that the virtual host to which the application must be bound.

CA SiteMinder® setting: Leave the value empty.

AUDITINGALLOWED

If you are configuring a Microsoft SQL Server or Oracle report database, specifies that the Content Management Server Auditing Database component can be configured.

0

Indicates that auditing is allowed.

1

Indicates that auditing is not allowed.

CA SiteMinder® setting: 0

AUDITINGENABLED

If you are configuring a Microsoft SQL Server or Oracle report database, specifies that the Content Management Server Auditing Database is enabled. This parameter is not related to CA SiteMinder® audit–based reports.

The Content Management Server Auditing Database is used to audit activities specific to the Report Server and is not used for CA SiteMinder®. A CA SiteMinder® audit database is required to run audit–based reports.

0

Indicates that auditing is enabled.

1

Indicates that auditing is not enabled.

CA SiteMinder® setting: 1

CANODE

Specifies the name of the Service Intelligence Agent (SIA) node.

Note: Do not use spaces or non–alphanumeric characters.

CADPORT

Specifies the port to which the SIA must connect and listen for requests.

Default: 6410

CLIENTAUDITINGREPORT

If the Content Management Server Auditing Database component is enabled, specifies the port on which the auditing service must listen. This parameter is not related to CA SiteMinder® audit–based reports. The Content Management Server Auditing Database is used to audit activities specific to the Report Server and is not used for CA SiteMinder®.

A CA SiteMinder® audit database is required to run audit–based reports.

CA SiteMinder® setting: Leave the default value (6420).

CLIENTLANGUAGE

Specifies the language pack to install.

CA SiteMinder® setting: EN

CLUSTERCMS

Specifies if you are adding servers to an existing Content Management Server. If you must change this value, we recommend using the installer to create another response file.

CA SiteMinder® setting: False

CMSPASSWORD

Specifies the password for an existing SAP BusinessObjects Enterprise administrator account. This parameter only applies to a custom or web tier installation.

CA SiteMinder® setting: Leave the value empty.

DATABASEAUDITDRIVER

Specifies which driver to use for the Content Management Server Auditing Database. This parameter is not related to CA SiteMinder® audit–based reports. The Content Management Server Auditing Database is used to audit activities specific to the Report Server and is not used for CA SiteMinder®.

A CA SiteMinder® audit database is required to run audit–based reports.

CA SiteMinder® settings:

• If you are installing the embedded version of MySQL, leave the default value (MySQLDatabaseSubSystem).
• If you are configuring and a Microsoft SQL Server or Oracle report database, leave the value empty.

DATABASEAUTHENTICATION

If you are configuring a Microsoft SQL Server or Oracle report database, this parameter is automatically generated.

CA SiteMinder® setting: Leave the value empty.

DATABASEAUTHENTICATION_AUDIT

If you are configuring a Microsoft SQL Server or Oracle report database, this parameter is automatically generated.

CA SiteMinder® setting: Leave the value empty.

DATABASECONNECT

Do not modify this parameter. This parameter is automatically generated.

CA SiteMinder® setting: Leave the value empty.

DATABASECONNECT_AUDIT

If you are configuring a Microsoft SQL Server or Oracle report database, this parameter is automatically generated.

CA SiteMinder® setting: Leave the value empty.

DATABASEDB

Specifies the name of the report database.

CA SiteMinder® setting:

• If you are installing the embedded version of MySQL, leave the default value (BOE120).
• If you are configuring a Microsoft SQL Server report database, leave the default value (RSDB).
• If you are configuring an Oracle report database, leave the value empty.

DATABASEDB_AUDIT

Specifies the name of the auditing database for the Content Management Server. This parameter is not related to CA SiteMinder® audit–based reports. The Content Management Server Auditing Database is used to audit activities specific to the Report Server and is not used for CA SiteMinder®.

A CA SiteMinder® audit database is required to run audit–based reports.

CA SiteMinder® settings:

• If you are installing the embedded version of MySQL, leave the default value (BOE120_AUDIT).
• If you are configuring a Microsoft SQL Server or Oracle report database, leave the value empty.

DATABASEDRIVER

Specifies which driver to use for the report database.

CA SiteMinder® setting: Leave the default value. If you must change this value, use the installer to create another response file.

DATABASEDSN

Specifies the name of the ODBC connection for the report database.

CA SiteMinder® settings:

• If you are installing the embedded version of MySQL, leave the default value (Business Objects CMS).
• If you are using an existing instance of Microsoft SQL Server, enter the DSN.
• If you are using an exiting instance of Oracle, leave the value empty.

DATABASEDSN_AUDIT

Specifies the name of the ODBC connection for the Content Management Sever Auditing Database. This parameter is not related to CA SiteMinder® audit–based reports. The Content Management Server Auditing Database is used to audit activities specific to the Report Server and is not used for CA SiteMinder®.

A CA SiteMinder® audit database is required to run audit–based reports.

CA SiteMinder® settings: Leave the default value (Business Objects Audit Server).

DATABASENWLAYER_AUDIT

Specifies the Content Management Server Audit Database type. This parameter is not related to CA SiteMinder® audit–based reports. The Content Management Server Auditing Database is used to audit activities specific to the Report Server and is not used for CA SiteMinder®.

A CA SiteMinder® audit database is required to run audit–based reports.

CA SiteMinder® setting: Leave the default value (ODBC).

DATABASEPORT

Specifies the port on which the report database must listen.

CA SiteMinder® settings:

• If you are installing the embedded version of MySQL, enter a port.

  Default: 3306

• If you are configuring a Microsoft SQL Server or Oracle report database, leave the value empty.

DATABASEPORT_AUDIT

Specifies the port on which the Content Management Server Audit Database must listen. This parameter is not related to CA SiteMinder® audit–based reports. The Content Management Server Auditing Database is used to audit activities specific to the Report Server and is not used for CA SiteMinder®.

A CA SiteMinder® audit database is required to run audit–based reports.

CA SiteMinder® settings: A value for this parameter is not required.

• If you are installing the embedded version of MySQL, enter a port.

  Default: 3306

• If you are configuring a Microsoft SQL Server or Oracle report database, leave the parameter empty. CA SiteMinder® does not require that you audit the Content Management Server.

DATABASEPWD

Specifies the password of the administrator account that can access the report database.

DATABASEPWD_AUDIT

Specifies the password of the administrator account that can access the Content Management Server Auditing Database. This parameter is not related to CA SiteMinder® audit–based reports. The Content Management Server Auditing Database is used to audit activities specific to the Report Server and is not used for CA SiteMinder®.

A CA SiteMinder® audit database is required to run audit–based reports.

CA SiteMinder® settings:

• If you are installing the embedded version of MySQL, match this value with the DATABASEPWD paramter.
• If you are configuring a Microsoft SQL Server or Oracle report database, leave the parameter empty.

DATABASEPWD_MYSQLROOT

If you are installing the embedded version of MySQL, specifies the password of the MySQL root user account that can access the report database.

DATABASERDMS_AUDIT

Specifies the Content Management Server Auditing Database type. This parameter is not related to CA SiteMinder® audit–based reports. The Content Management Server Auditing Database is used to audit activities specific to the Report Server and is not used for CA SiteMinder®.

A CA SiteMinder® audit database is required to run audit–based reports.

CA SiteMinder® setting: Leave the default value of this parameter.

DATABASESERVER

If you are configuring an Oracle report database, specifies the name of the Oracle database service.

Note: This parameter appears in a response file that configures a Microsoft SQL Server report database. Leave this value empty.

DATABASESERVER_AUDIT

Specifies the name of the Content Management Server Auditing Database server host system. This parameter is not related to CA SiteMinder® audit–based reports. The Content Management Server Auditing Database is used to audit activities specific to the Report Server and is not used for CA SiteMinder®.

A CA SiteMinder® audit database is required to run audit–based reports.

CA SiteMinder® settings:

• If you are installing the embedded version of MySQL, leave the default value (localhost).
• If you are configuring a Microsoft SQL Server or Oracle report database, leave the parameter empty.

DATABASEDRIVER

Specifies which driver to use for the report database.

CA SiteMinder® setting: Leave the default value. If you must change this value, use the installer to create another response file.

DATABASEUID

Specifies the name of the administrator account that can access the report database.

CA SiteMinder® settings:

• If you are installing the embedded version of MySQL, enter an account name. The installer creates the administrator account with the required privileges.
• If you are configuring Microsoft SQL Server, enter an account name with database owner (DBO) privileges.
• If you are configuring Oracle, enter an account name with the following privileges enabled: create session, create table, and create procedure.

  You can also enter an account name with the CONNECT and RESOURCE roles enabled. Be sure to disable the Admin Option setting for both roles.

DATABASE_UID_AUDIT

Specifies the name of the administrator account that can access the Content Management Server Auditing Database. This parameter is not related to CA SiteMinder® audit–based reports. The Content Management Server Auditing Database is used to audit activities specific to the Report Server and is not used for CA SiteMinder®. A CA SiteMinder® audit database is required to run audit–based reports.

CA SiteMinder® settings:

• If you are installing the embedded version of MySQL, match this value with the DATABASEUID parameter.
• If you are configuring a Microsoft SQL Server or Oracle report database, leave the value empty.

DATABASEUSER

If you are configuring a Microsoft SQL Server or Oracle report database, this parameter is automatically generated and matches the DATABASEUID value.

CA SiteMinder® setting: Be sure that this value matches the DATABASEUID value.

DATABASEUSER_AUDIT

If you are configuring a Microsoft SQL Server or Oracle report database, this parameter is automatically generated and is empty.

CA SiteMinder® setting: Leave the value empty.

DATABASE_AUDIT_CONNSVR

Do not modify this parameter. This parameter is automatically generated.

CA SiteMinder® setting: connsvr

ENABLELOGFILE

Specifies if the installer creates installation log files.

0

Do not create log files.

1

Create log files.

ENABLESERVERS

Specifies if servers must be enabled once the installation is complete.

0

Do not enable servers.

1

Enable servers.

CA SiteMinder® setting: 1

EXPANDCMS

If you are configuring a Microsoft SQL Server or Oracle report database, this parameter is automatically generated. Do not modify this parameter

CA SiteMinder® setting: 1

INSTALL.LP.EN.SELECTED

Specifies that the installer install the English Language pack.

CA SiteMinder® setting: 1

INSTALLDBTYPE

Do not modify this parameter. This parameter is automatically generated.

INSTALLDIR

Specifies the directory to which the Report Server is installed.

Note: Be sure that you escape the backslashes in the path with a backslash character.

Example: C:\\Program Files\\CA\\SC\\CommonReporting3\\

INSTALLLEVEL

Do not modify this parameter. This parameter is automatically generated.

INSTALLMODE

Specifies the installation method.

New

Install all required server and client components.

Custom

Select specific server and client components to install.

Web Tier

Install only the required web application server components.

CA SiteMinder® setting: New

INSTALL_DB_TYPE

Do not modify this parameter. This parameter is automatically generated.

MYSQLPORT

If you are using the embedded version of MySQL, specifies the port to which MySQL must connect and listen for requests.

Default: 3306.

Note: This parameter appears in the properties file that configures Microsoft SQL Server as a report database. Leave the default value.

MYSQLSERVER

If you are configuring a Microsoft SQL Server or Oracle report database, this parameter is automatically generated. Do not modify this parameter.

CA SiteMinder® setting: Leave the value empty.

MYSQLSERVER_AUDIT

If you are configuring a Microsoft SQL Server or Oracle report database, this parameter is automatically generated. Do not modify this parameter.

CA SiteMinder® setting: Leave the value empty.

NEWCMSPASSWORD

Specifies the password for the default SAP BusinessObjects Enterprise administrator account. This parameter is automatically generated.

CA SiteMinder® setting: Do not modify this parameter. If you must change this value, use the installer to create another response file.

MYSQL_REMOTE_ACCESS

If you are using the embedded version of MySQL to function as the report database, specifies if remote access is enabled.

CA SiteMinder® setting: Leave the value empty.

Note: This parameter appears in the properties file that configures Microsoft SQL Server as a report database. Leave the value empty.

NAMESERVER

Specifies the name of the Report Server host system.

NEWCMSPASSWORD

Specifies the password for the default SAP BusinessObjects Enterprise administrator account.

CA SiteMinder® setting: Do not modify this parameter. This parameter is automatically generated. If you must change this value, use the installer to create another response file.

NSPORT

Specifies the port on which the Content Management Server must listen.

Default: 6400.

REINITIALIZE_CMS_DB

If you are configuring a Microsoft SQL Server or Oracle report database, specifies that the database is reinitialized.

CA SiteMinder® setting: 1

SINGLESERVER

Do not modify this parameter. This parameter is automatically generated. Do not modify this parameter.

CA SiteMinder® setting: Leave the value empty.

SKIP_DEPLOYMENT

Do not modify this parameter. This parameter is automatically generated. Do not modify this parameter.

CA SiteMinder® setting: Leave the value empty.

SelectODBCDSN

If you are configuring a Microsoft SQL Server or Oracle report database, this parameter is automatically generated. Do not modify this parameter.

CA SiteMinder® setting: Leave the value empty.

TOMCAT_CONNECTION_PORT

Specifies the port to which the embedded version of Apache Tomcat must connect and wait for requests.

Default: 8080.

TOMCAT_REDIRECT_PORT

Specifies the port to which the embedded version of Apache Tomcat must redirect requests.

Default: 8443

TOMCAT_SHUTDOWN_PORT

Specifies the port to which the SHUTDOWN command for the embedded version of the Apache Tomcat must be issued.

Default: 8005

WCADOTNETINSTALL

Do not modify this parameter. This parameter is automatically generated.

CA SiteMinder® setting: False

WCAEXISTINGINSTALL

Do not modify this parameter. This parameter is automatically generated.

CA SiteMinder® setting: False

WCAJAVAINSTALL

Do not modify this parameter. This parameter is automatically generated.

CA SiteMinder® setting: False

WCATOMCATINSTALL

Do not modify this parameter. This parameter is automatically generated.

CA SiteMinder® setting: True

WDEPLOY_LANGUAGES

Do not modify this parameter. This parameter is automatically generated.

CA SiteMinder® setting: en

WDEPLOY_LATER

Do not modify this parameter. This parameter is automatically generated.

CA SiteMinder® setting: Leave this value blank.

WEBSITE_METABASE_NUMBER

Do not modify this parameter. This parameter is automatically generated.

CA SiteMinder® setting: 1

WEBSITE_NAME

If you are deploying an IIS web application server, specifies the name of the IIS website to which the SAP BusinessObjects Enterprise applications are deployed.

CA SiteMinder® only supports the embedded version of Apache Tomcat.

CA SiteMinder® setting: Default Web Site

WEBSITE_PORT

Do not modify this parameter. This parameter is automatically generated.

CA SiteMinder® setting: 80

Features

This section details the parameters in the Features section of the response file.

REMOVE

Specifies which client, server, web tier, and other SAP BusinessObjects Enterprise components not to install.

CA SiteMinder® setting: Do not change the value of this parameter. To change this value, use the installer to create another response file.

ADDLOCAL

Specifies which client, server, web tier, and other SAP BusinessObjects Enterprise components to install.

CA SiteMinder® setting: Do not change the value of this parameter. To change this value, use the installer to create another response file.

ADDSOURCE

Do not modify this parameter. This parameter is automatically generated.

CA SiteMinder® setting: Leave the value empty.

ADVERTISE

Do not modify this parameter. This parameter is automatically generated.

CA SiteMinder® setting: Leave the value empty.

BIEK

This section details the parameters in the BIEK section of the response file.

BIEK_INSTALL_SAMPLES

Specifies if the installer must install CA templates. This parameter is not related to the CA SiteMinder® reporting templates. The CA SiteMinder® Report Server Configuration wizard installs the required reporting templates. You run the wizard after installing the Report Server.

0

Do not install sample templates.

1

Install sample templates.

CA SiteMinder® setting: 0

SUPPRESS_REBOOT

Specifies if the installer reboots the computer after a successful installation.

0

Lets the installer restart the system after a successful installation.

1

Prevents the installer from restarting the system after a successful installation. Restart the system manually to complete the installation.

CA SiteMinder® setting: 1

Modify the Report Server Response File for UNIX

You modify the installer response file to define installation variables. The default values reflect the information that you entered when you installed the Report Server and saved a response file.

Important! Consider the following items before you modify the file:

• Some parameters identify the type of database that is to function as the report database. Do not use the properties file to change the type of database that the installer is to configure. To change the report database type, use the installer to create another properties file.
• Passing a parameter in the command line overrides the respective setting in the response file.

The Report Server installer generates some parameters automatically. Do not modify the following parameters:

• PRODUCTID_NAME
• BOBJVERSION
• DATACONNECTION
• PRODUCTID_VER
• FUNCTION
• LANGUAGES_TO_INSTALL
• EXPANDSERVERS

Manual Settings

This section details the parameter in the Manual Settings section of the response file.

MACHINENAME

Specifies the name of the Report Server host. This value overrides the local server name. If you do not provide a value, the value defaults to the local host system name.

Paths

This section details the parameter in the Paths section of the response file.

BOBJEDIR

Specifies the path of the bobje directory. The bobje directory is automatically created in the common reporting directory.

Example: /opt/CA/SharedComponents/CommonReporting3/bobje/

CDDIR

Specifies the path to the Disk1 directory in the Report Server installation kit.

LICENSEDIR

Specifies the path to the directory that contains the product license.

Note: Installing the Report Server does not require you to supply a product license.

CA SiteMinder® setting: Leave the value empty.

Product Information

This section details the parameters in the Product Information section of the response file.

BOBJELANG

Specifies the language setting that the installation is to use.

CA SiteMinder® setting: en

PRODUCTID_NAME

Specifies the name of the product that is being installed.

CA SiteMinder® setting: BusinessObjects

BOBJEVERSION

Specifies the version of SAP BusinessObjects Enterprise.

CA SiteMinder® setting: 12.0

PRODUCTID_VER

Specifies the version of the product being installed.

CA SiteMinder® setting: 12.3

BOBJELICENSEKEY

Specifies the license key that is required to install the product. This value appears encrypted.

CA SiteMinder® setting: Do not modify this value.

PIDKEY

Specifies the product ID key. This value appears encrypted.

CA SiteMinder® setting: Do not modify this value.

Installation Information

This section details the parameters in the Installation Information section of the response file.

FUNCTION

Do not modify this parameter. This parameter is automatically generated.

CA SiteMinder® setting: install

INSTALLTYPE

Specifies the installation method.

new

Install all required server and client components.

custom

Select specific server and client components to install.

webtier

Install only the required web application server components.

CA SiteMinder® setting: new

INSTALLMODE

Specifies a comma–delimited list for the Report Server installation operating modes. This parameter supports the following options:

• install
• modify
• remove
• interactive

CA SiteMinder® setting: install

LOCALNAMESERVER

Specifies the name of the Report Server host system.

BOBJEINSTALLLOCAL

Specifies whether to execute a user or system installation.

CA SiteMinder® setting: user

LANGPACKS_TO_INSTALL

Specifies the language packs to install. CA SiteMinder® only supports the English language pack. The installer installs the English language pack by default.

CA SiteMinder® setting: Leave the value empty.

LANGUAGES_TO_INSTALL

Specifies all languages included in SAP BusinessObjects Enterprise. These values represent the available languages, not the language packs to install.

CA SiteMinder® setting: Leave the comma–delimited list of values.

BOBJEUSERNAME

Specifies the name of the non–root user account.

CA SiteMinder® setting: Be sure that this value matches the value of BIEK_INSTALL_USER in the BIEK section of the response file.

EXPANDSERVERS

Do not modify this parameter. This parameter is automatically generated.

CA SiteMinder® setting: Leave the value empty.

Tomcat

This section details the parameters in the Tomcat section of the response file.

INSTALLTOMCAT

Specifies if the embedded version of Apache Tomcat must be installed.

CA SiteMinder® setting: yes

Note: Although the installer lets you configure an existing instance of a web application server, CA SiteMinder® only supports the embedded version of Apache Tomcat.

CONNECTORPORT

Specifies the port to which the embedded version of Apache Tomcat must connect and wait for requests.

Default: 8080.

REDIRECTPORT

Specifies the port to which the embedded version of Apache Tomcat must redirect requests.

Default: 8443

SHUTDOWNPORT

Specifies the port to which the SHUTDOWN command for the embedded version of the Apache Tomcat must be issued.

Default: 8005

Application Server

This section details the parameters in the Application Server section of the response file.

AS_DIR

Specifies the path to which the embedded version of Apache Tomcat is installed. The path is automatically set using the installation directory.

Example: /opt/CA/SharedComponents/CommonReporting3//bobje/tomcat/

AS_SERVER

Specifies the type of Java web application server to deploy. If the embedded version of Apache Tomcat is installed, the value defaults to tomcat55. CA SiteMinder® only supports the embedded version of Apache Tomcat.

CA SiteMinder® setting: tomcat55

AS_INSTANCE

Specifies the name of the web application server instance. If the embedded version of Apache Tomcat is installed, the value defaults to localhost. CA SiteMinder® only supports the embedded version of Apache Tomcat.

CA SiteMinder® setting: localhost

AS_VIRTUAL_HOST

If you are deploying the Report Server to a virtualized environment, specifies the virtual host to which the application must be bound.

CA SiteMinder® setting: Leave the value empty.

AS_ADMIN_PORT

Specifies the port on which the web application server is listening. If the embedded version of Apache Tomcat is installed, the value is empty. CA SiteMinder® only supports the embedded version of Apache Tomcat.

CA SiteMinder® setting: Leave the value empty.

AS_ADMIN_USERNAME

Specifies the account name of the administrator account that is used to access the web application server. If the embedded version of Apache Tomcat is installed, the value is empty. CA SiteMinder® only supports the embedded version of Apache Tomcat.

CA SiteMinder® setting: Leave the value empty.

AS_ADMIN_PASSWORD

Specifies the password of the administrator account that can access the web application server. If the embedded version of Apache Tomcat is installed, the value is empty. CA SiteMinder® only supports the embedded version of Apache Tomcat.

CA SiteMinder® setting: Leave the value empty.

AS_ADMIN_SECURE

Specifies that an administrator credential must be passed to access the web application server. This parameter applies to a web application server that CA SiteMinder® does not support.

CA SiteMinder® setting: false

AS_APPSERVER_ID

Specifies the name of the application server. This parameter applies to a web application server that CA SiteMinder® does not support.

CA SiteMinder® setting: Leave the value empty.

AS_GROUP_ID

Specifies the group ID of the application server. This parameter applies to a web application server that CA SiteMinder® does not support.

CA SiteMinder® setting: Leave the value empty.

WEBDEPLOYACTION

Specifies the action to perform on the web application server.

CA SiteMinder® setting: deploy

REDEPLOYWEBAPPS

Do not modify this parameter. This parameter is automatically generated.

CA SiteMinder® setting: true

CMS Cluster

This section details the parameters in the CMS Cluster section of the response file.

CMSCLUSTER

Specifies if you are adding servers to an existing Content Management Server.

CA SiteMinder® setting: no

CLUSTER_NAMESERVER

If you are clustering servers to a Content Management Server, specifies the name of the Content Management Server.

CA SiteMinder® setting: Leave the value empty.

CLUSTERPORTNUMBER

If you are clustering servers to a Content Management Server, specifies the port on which the Content Management Server is listening. This value defaults to the value of the CMSPORTNUMBER parameter. The parameter is located in the CMS section of the response file.

CA SiteMinder® setting: Be sure that this value matches the value of CMSPORTNUMBER.

CMS

This section details the parameters in the CMS section of the response file.

DBTYPE

Specifies the type of database that is to function as the report database.

CA SiteMinder® settings:

• MySQL

Important! CA SiteMinder® only supports the embedded version of MySQL.

• Oracle

Important! The Report Server is a CA common component that CA products can share. As such, the installer lets you configure the report database to database types and versions that other products support, but CA SiteMinder® does not. For a list of supported database types and versions, see the CA SiteMinder® 12.51 Platform Support Matrix.

SERVICENAME

Specifies the service name of the Oracle database functioning as the report database.

Note: If you are configuring MySQL, this value defaults to BOE120. Leave the default value.

DATABASEUID

Specifies the name of the administrator account that is used to access the report database.

CA SiteMinder® settings:

• If you are installing the embedded version of MySQL, enter an account name. The installer creates the administrator account with the required privileges.
• If you are configuring Oracle, enter an account name with the following privileges enabled: create session, create table, and create procedure.

  You can also enter an account name with the CONNECT and RESOURCE roles enabled. Be sure to disable the Admin Option setting for both roles.

DATABASEPASSWORD

Specifies the password of the administrator account that is used to access the report database.

CMSNAMESERVER

Specifies the name of the Report Server host system.

CA SiteMinder® setting: Be sure that this value matches the value of LOCALNAMESERVER in the Installation Information section of the response file.

CMSPORTNUMBER

Specifies the port to which the Content Management Server must connect and wait for requests.

Default: 6400

CMSPASSWORD

Specifies the password for the administrator account that is to access the Central Management Server. This password is for the SAP BusinessObjects Enterprise system administrator account.

SIANODENAME

Specifies the name of the Service Intelligence Agent (SIA) node.

Note: Do not use spaces or non–alphanumeric characters.

SIAPORTNUMBER

Specifies the port to which the SIA must connect and wait for requests.

Default: 6410

REINIT

Specifies if the report database must be reinitialized. Do not modify this parameter. This parameter is automatically generated.

CA SiteMinder® setting: yes

MySQL

This section details the parameters in the MySQL section of the response file.

INSTALLMYSQL

Specifies if the embedded version of MySQL must be installed.

CA SiteMinder® settings:

• If you are installing the embedded version of MySQL, enter yes.
• If you are configuring an Oracle report database, leave the value empty.

SERVICEPORT

If you are installing the embedded version of MySQL, specifies the port to which MySQL must connect and listen for requests.

Default: 3306

Note: If you are configuring an Oracle report database, leave the default value.

MYSQLHOSTNAME

If you are installing the embedded version of MySQL, specifies the IP address of the MySQL host system. The MySQL host system is the same as the Report Server host system.

MYSQLROOTPASSWORD

If you are installing the embedded version of MySQL, specifies the password of the MySQL root user account.

Audit

This section details the parameters in the Audit section of the response file.

These parameters are not related to the CA SiteMinder® audit–based reports. The Content Management Server Auditing Database is used to audit activities specific to the Report Server and is not used for CA SiteMinder®.

A CA SiteMinder® audit database is required to run audit–based reports.

AUDITINGENABLED

Specifies if the Content Management Server Auditing Database is enabled.

• If you are installing the embedded version of MySQL, the Auditing Database is automatically enabled.

  CA SiteMinder® setting: yes

• If you are configuring an Oracle report database, auditing the Content Management Server is not required.

  CA SiteMinder® setting: no

SERVICENAME_AUDIT

Specifies the name of the audit service that the Content Management Server uses. This value defaults to BOE120_AUDIT, even if you are not enabling the Audit Database.

CA SiteMinder® setting: Leave the default value.

SERVICEPORT_AUDIT

Specifies the port number to which the Content Management Server Audit Database must connect and listen for requests. This value defaults to 3306.

CA SiteMinder® setting:

• If you are installing the embedded version of MySQL, match this value to the SERVICEPORT parameter in the MySQL section of the response file.
• If you are configuring an Oracle report database, leave the default value.

MYSQLHOSTNAME_AUDIT

Specifies the IP address of Content Management Server Audit Database host system.

CA SiteMinder® settings:

• If you are installing the embedded version of MySQL, match this value to the MYSQLHOSTNAME parameter in the MySQL section of the response file.
• If you are configuring an Oracle report database, leave the value empty.

DATABASEUID_AUDIT

Specifies the name of the administrator account that is used to access the Content Management Server Auditing Database.

CA SiteMinder® settings:

• If you are installing the embedded version of MySQL, match this value to the DATABASEUID parameter in the MySQL section of the response file.
• If you are configuring an Oracle report database, leave the value empty.

DATABASEPWD_AUDIT

Specifies the password of the administrator account that is used to access the Content Management Server Auditing Database.

CA SiteMinder® settings:

• If you are installing the embedded version of MySQL, match this value to the MYSQLROOTPWD parameter in the MySQL section of the response file.
• If you are configuring an Oracle report database, leave the value empty.

Marketing Products

This section details the parameters in the Marketing Products section of the response file.

ENABLEMP

Specifies which client, server, web tier, and other SAP BusinessObjects Enterprise to enable manually.

CA SiteMinder® setting: Leave the value empty.

DISABLEMP

Specifies which client, server, web tier, and other SAP BusinessObjects Enterprise components disable manually.

CA SiteMinder® setting: Leave the value of this parameter empty.

BIEK

This section details the parameters in the BIEK section of the response file.

BIEK_INSTALL_USER

Specifies the non–root user account that the installer must use.

BIEK_INSTALL_GROUP

Specifies the group to which the non–root user belongs.

BIEK_CASHCOMP

Specifies the full path to which the CA Shared Components environment variable (CASHComp) must be set. If CASHComp is already set, the installer ignores this value.

BIEK_INSTALL_SAMPLES

Specifies if the installer must install CA templates. This parameter is not related to the CA SiteMinder® reporting templates. The CA SiteMinder® Report Server Configuration wizard installs the required reporting templates. You run the wizard after installing the Report Server.

0

Do not install sample templates.

1

Install sample templates.

CA SiteMinder® setting: 0

BIEK_MIGRATE_CMS_DATA

Do not modify this parameter. This parameter is for upgrades only.

CA SiteMinder® setting: 0

BIEK_SOURCE_CMS_PASSWORD

Do not modify this parameter. This parameter is for upgrades only.

CA SiteMinder® setting: Leave the value empty.

Modify the CA SiteMinder® Report Server Configuration Wizard Properties File

You modify the Report Server Configuration Wizard properties file to define configuration variables. The default parameters, passwords, and paths in this file reflect the information entered the last time the wizard ran.

The properties file has the following parameters:

DEFAULT_BOXI_INSTALL_PATH

Specifies the Report Server installation path.

DEFAULT_BOXI_PASSWORD

Specifies the password of the default BusinessObjects administrator account.

Note: If you are using encrypted value in ENCRYPTED_BOXI_PASSWORD, this parameter does not require a value.

ENCRYPTED_BOXI_PASSWORD

Specifies the encrypted password of the default BusinessObjects administrator account.

Important! Do not change the encrypted value. To enter another password, comment the encrypted password and specify a value for DEFAULT_BOXI_PASSWORD.

DEFAULT_AUDIT_DATABASE_TYPE

Specifies the type of database functioning as the CA SiteMinder® audit store.

Note: You do not have to configure a CA SiteMinder® audit database before running the Report Server Configuration Wizard.

Values: 1 or 2

1

Specifies Microsoft SQL Server.

2

Specifies Oracle.

Run the Report Server Installer

You run an unattended installation to install the Report Server without user interaction.

Before You Install

Consider the following items before installing the Report Server:

• You install the Report Server using the installation media on the Technical Support site.

  Note: For a list of installation media names, see the Policy Server Release Notes.

• The Report Server is compiled as 32–bit native binary and is designed to use 32–bit data source middleware connectivity. If you are installing to a Windows 64–bit operating system, be sure to create the DSN using odbcad32.exe. This executable is located in the following location:

  install_home\Windows\SysWOW64.

  install_home

  Specifies the installation path of the Windows operating system.

• The Report Server installation includes the following components that run as processes:
  • The Content Management Server
  • The Server Intelligence Agent

  These components require TCP/IP ports to communicate. The installer lets you modify the default settings to prevent port conflicts on the Report Server host system.

• Important! The installation zip contains multiple folders. The Report Server installer requires this folder structure. If you moved the Reports Server installer after extracting the zip, copy the entire folder structure to the same location. Be sure that you execute the installation media from the folder structure.

More information:

Locate the Installation Media

Installation Media Names

Windows

Follow these steps:

1. Exit all applications that are running.
2. Open a command prompt.
3. Change the directory to temporary_location.

   temporary_location

   Specifies the location to which you copied the installation media.

4. Enter the following command:

   installation_media silent path_to_response_file
   

   Important! Before running a CA SiteMinder® utility or executable on Windows Server 2008, open the command-line window with administrator permissions. Open the command-line window this way, even if your account has administrator privileges.

   installation_media

   Specifies the name of the Report Server installation executable.

   Note: For a list of installation media names, see the Policy Server Release Notes.

   path_to_response_file

   Specifies the path to the file. The path must include the response file name.

   Note: The response file does not have to be in the same directory as the installation executable.

   The silent installation begins.

More information:

Installation Media Names

UNIX

Follow these steps:

1. Exit all applications that are running.
2. Be sure that you are using an account with root–user privileges.
3. Open a Bourne shell and navigate to temporary_location.

   temporary_location

   Specifies the location to which you copied the installation media.

4. Enter the following command:

   ./installation_media silent path_to_response_file
   

   installation_media

   Specifies the name of the Report Server executable.

   Note: For a list of installation media names, see the Policy Server Release Notes.

   path_to_response_file

   Specifies the path to the response file. The path must include the response file name.

   Note: The response file does not have to be in the same directory as the installation executable.

   The silent installation begins.

More information:

Installation Media Names

Install the Report Templates

You run an unattended installation to install the CA SiteMinder® report templates without user interaction.

Before You Install

You install the CA SiteMinder® report templates using the installation media on the Technical Support site.

Note: For a list of installation media names, see the Policy Server Release Notes.

More information:

Locate the Installation Media

Installation Media Names

Windows

Follow these steps:

1. Exit all applications that are running.
2. Be sure that the Report Server is started.
3. Open a command prompt.
4. Change the directory to temporary to which you copied the installation media.
5. Enter the following command:

   installation_media -f properties_file -i silent
   

   Important! Before running a CA SiteMinder® utility or executable on Windows Server 2008, open the command-line window with administrator permissions. Open the command-line window this way, even if your account has administrator privileges.

   installation_media

   Specifies the name of the CA SiteMinder® Report Server Configuration Wizard installation executable.

   Note: For a list of installation media names, see the Policy Server Release Notes.

   -f properties_file

   Specifies the path to the properties file. The path must include the properties file name.

   Note: The properties file does not have to be in the same directory as the installation executable.

   -i silent

   Specifies that the installer run silently.

   The report templates installation begins.

6. After the installation finishes, restart the Report Server.

Note: You are required to register the Report Server before you can create reports.

More information:

How to Register the Report Server

Installation Media Names

UNIX

Follow these steps:

1. Exit all applications that are running.
2. Be sure that the Report Server is started.
3. Open a shell and navigate to where the installation media is located.
4. Enter the following command:

   ./installation_media -f properties_file -i silent
   

   installation_media

   Specifies the name of the CA SiteMinder® Report Server Configuration Wizard installation media.

   Note: For a list of installation media names, see the Policy Server Release Notes.

   -f properties_file

   Specifies the path to the properties file. The path must include the properties file name.

   Note: The properties file does not have to be in the same directory as the installation executable.

   -i silent

   Specifies that the installer run silently.

   The report template installation begins.

5. After the installation finishes, restart the Report Server.

Note: You are required to register the Report Server before you can create reports.

More information:

How to Register the Report Server

Installation Media Names