Messages and Descriptions › All -G- Messages › GSV3 - General Group 3

GSV3 - General Group 3

GSV3001I (<modpfx>RMGR) EOT <asid> <jobnm> <taskid> logger task ended

Diagnostic informational only. This message is written to the console from the IMS Logger Resource Manager when the "IMS-MESSAGE-TRACE" option is set to "YES" in the IMSDATA parmlib member.

GSV3002I (<modpfx>RMGR) EOT <asid> <jobnm> IMS CTL Rgn <imsid> task ended

Diagnostic informational only. This message is written to the console from the IMS Logger Resource Manager when the "IMS-MESSAGE-TRACE" option is set to "YES" in the IMSDATA parmlib member.

GSV3003I Reserved

Reserved

GSV3004I Reserved

Reserved

GSV3005I Reserved

Reserved

GSV3006I (<modpfx>RMGR) EOT <asid> <jobnm> IMSLOGR task <taskid> posted for termination

Diagnostic informational only. This message is written to the console from the IMS Logger Resource Manager when the "IMS-MESSAGE-TRACE" option is set to "YES" in the IMSDATA parmlib member.

GSV3007I (<modpfx>RMGR) EOT <asid> <jobnm> DEP Rgn <imsid> task ended

Diagnostic informational only. This message is written to the console from the IMS Logger Resource Manager when the IMS-MESSAGE-TRACE option is set to YES in the IMSDATA parmlib member.

GSV3008I (<modpfx>RMGR) EOT <asid> <jobnm> Logger Vector entry cleared

Diagnostic informational only. This message is written to the console from the IMS Logger Resource Manager when the IMS-MESSAGE-TRACE option is set to YES in the IMSDATA parmlib member.

GSV3009I Reserved

Reserved

GSV3010I (<modpfx>RMGR) EOM <asid> <jobnm> Monitor Region <taskid> ended

Diagnostic informational only. This message is written to the console from the IMS Logger Resource Manager when the IMS-MESSAGE-TRACE option is set to YES in the IMSDATA parmlib member.

GSV3012I (<modpfx>RMGR) EOM <asid> <jobnm> IMS CTL Region <taskid> ended

Diagnostic informational only. This message is written to the console from the IMS Logger Resource Manager when the IMS-MESSAGE-TRACE option is set to YES in the IMSDATA parmlib member.

GSV3013I (<modpfx>RMGR) EOM <asid> <jobnm> IMSLOGR task <taskid> posted for termination

Diagnostic informational only. This message is written to the console from the IMS Logger Resource Manager when the IMS-MESSAGE-TRACE option is set to YES in the IMSDATA parmlib member.

GSV3014I (<modpfx>RMGR) EOM <asid> <jobnm> Logger Structure for <imsid> released

Diagnostic informational only. This message is written to the console from the IMS Logger Resource Manager when the IMS-MESSAGE-TRACE option is set to YES in the IMSDATA parmlib member.

GSV3015I (<modpfx>RMGR) EOM <asid> <jobnm> Logger Vector entry cleared

Diagnostic informational only. This message is written to the console from the IMS Logger Resource Manager when the IMS-MESSAGE-TRACE option is set to YES in the IMSDATA parmlib member.

GSV3016I Reserved

Reserved

GSV3017I Reserved

Reserved

GSV3018I Reserved

Reserved

GSV3019I Reserved

Reserved

GSV3020E (<modpfx>HOOK) Error installing IMS <hookid> hook

An error has occurred when attempting to install the IMS hook intercept specified by <hookid>. Contact CA Technical Support.

GSV3021E (<modpfx>HOOK) IMS <hookid> hook not installed. Unable to activate

An error has occurred when attempting to activate the IMS hook intercept specified by <hookid>. The intercept was found not to be installed and could not be activated Contact CA Technical Support.

GSV3022E (<modpfx>HOOK) Error activating IMS <hookid> hook

An error has occurred when attempting to activate the IMS hook intercept specified by <hookid>. Contact CA Technical Support.

GSV3023E (<modpfx>HOOK) Error de-activating IMS <hookid> hook

An error has occurred when attempting to de-activate the IMS hook intercept specified by <hookid>. Contact CA Technical Support.

GSV3024I Reserved

Reserved

GSV3025I Reserved

Reserved

GSV3026I Reserved

Reserved

GSV3027I Reserved

Reserved

GSV3028I Reserved

Reserved

GSV3029I Reserved

Reserved

GSV3030I Reserved

Reserved

GSV3031I (<modpfx>TCvr) IMS Trace Set Monitor command event started

An IMS TRACE SET MONITOR command has been entered. The Monitor Trace Command Pre-processing intercept has detected this and has temporarily de-activated the Monitor DC Monitor intercept until the trace command completes. This is an informational only message.

GSV3032I (<modpfx>TCvr) IMS Trace Set Monitor command found already in progress

An IMS TRACE SET MONITOR command has been entered. The Monitor Trace Command preprocessing intercept has determined that a trace command was already in progress. This is an informational only message.

GSV3033I (<modpfx>TCvr) IMS Trace Set Monitor command failed

An IMS TRACE SET MONITOR command has un-successfully completed. The Monitor Trace Command Post-processing intercept has re-activated the Monitor DC Monitor intercept. This is an informational only message.

GSV3034I (<modpfx>TCvr) IMS Trace Set Monitor command event ended

An IMS TRACE SET MONITOR command has un-successfully completed. The Monitor Trace Command Post processing intercept has re-activated the Monitor DC Monitor intercept. This is an informational only message.

GSV3035I Reserved

Reserved

GSV3036I Reserved

Reserved

GSV3037I Reserved

Reserved

GSV3038I Reserved

Reserved

GSV3039I Reserved

Reserved

GSV3040I (<modpfx>IMvr) IMS Trace Command Init/Term post entered

An IMS TRACE SET MONITOR command has successfully completed. The Monitor DC Monitor Initialization/Termination intercept has been entered. This is an informational only message.

GSV3041I (<modpfx>IMvr) IMS Trace Set Monitor command event ended

An IMS TRACE SET MONITOR command has completed processing. The Monitor DC Monitor intercept has been re-activated. This is an informational only message.

GSV3042I Reserved

Reserved

GSV3043I Reserved

Reserved

GSV3044I Reserved

Reserved

GSV3045I Reserved

Reserved

GSV3046I Reserved

Reserved

GSV3047I Reserved

Reserved

GSV3048I Reserved

Reserved

GSV3049I Reserved

Reserved

GSV3050E (<modpfx>HKvr) Error obtaining workarea storage

An error occurred obtaining storage during hook IMS logger intercept installation. Contact CA Technical Support.

GSV3051E (<modpfx>HKvr) Error loading module <modname>

An error occurred loading an IMS module during hook IMS logger intercept installation. Contact CA Technical Support.

GSV3052E (<modpfx>HKvr) Error locating Trace command verb

An error occurred locating the Trace command verb entry during IMS logger intercept installation. Contact CA Technical Support.

GSV3053I Reserved

Reserved

GSV3054I Reserved

Reserved

GSV3055I Reserved

Reserved

GSV3056I Reserved

Reserved

GSV3057I Reserved

Reserved

GSV3058I Reserved

Reserved

GSV3059I Reserved

Reserved

GSV3060I Reserved

Reserved

GSV3061I Reserved

Reserved

GSV3062I Reserved

Reserved

GSV3063I Reserved

Reserved

GSV3064I Reserved

Reserved

GSV3065I Reserved

Reserved

GSV3066I Reserved

Reserved

GSV3067I Reserved

Reserved

GSV3068I Reserved

Reserved

GSV3069I Reserved

Reserved

GSV3070I Reserved

Reserved

GSV3071I Reserved

Reserved

GSV3072I Reserved

Reserved

GSV3073I Reserved

Reserved

GSV3074I Reserved

Reserved

GSV3075I Reserved

Reserved

GSV3076I Reserved

Reserved

GSV3077I Reserved

Reserved

GSV3078I Reserved

Reserved

GSV3079I Reserved

Reserved

GSV3080I Reserved

Reserved

GSV3081I Reserved

Reserved

GSV3082I Reserved

Reserved

GSV3083I Reserved

Reserved

GSV3084I Reserved

Reserved

GSV3085I Reserved

Reserved

GSV3086I Reserved

Reserved

GSV3087I Reserved

Reserved

GSV3088I Reserved

Reserved

GSV3089I Reserved

Reserved

GSV3090I Reserved

Reserved

GSV3091I Reserved

Reserved

GSV3092I Reserved

Reserved

GSV3093I Reserved

Reserved

GSV3094I Reserved

Reserved

GSV3095I Reserved

Reserved

GSV3096I Reserved

Reserved

GSV3097I Reserved

Reserved

GSV3098I Reserved

Reserved

GSV3099E (<modpfx>HRTM) Error occurred during <hookid> intercept processing

A failure occurred while processing in an IMS intercept. Recovery Termination Management is invoked and a SDUMP is taken. Intercept processing is disabled immediately and the Monitor Logger task for the IMS Control region is terminated to prevent any further failures. Contact CA Technical Support.

GSV3102I Nucleus termination started

Informational only.

GSV3103I Nucleus termination complete

Informational only.

GSV3104E <parmname> parameter required by <name> <type>

The <name> <type> requires the <parmname> parameter.

GSV3105I Exec parm processing started

Informational only.

GSV3106I Exec parm processing bypassed, XPPB not supplied

Informational only.

GSV3107I Exec parm processing completed

Informational only.

GSV3108I Parm len <len>, parm <parmstring>

Informational only.

GSV3109I Exec parm processing bypassed, parm len is zero

Informational only.

GSV3110E Invalid SSID specification - <badssid>

An invalid SSID specification was found. The SSID for the application interface should be specified as:

(ssid)

The SSID must be 4 characters long. The first character must be uppercase alphabetic or national and the second second through fourth must uppercase alphabetic, national, or numeric. Blanks are not allowed between the parentheses and the ssid.

GSV3111E Invalid XPPB_Type - <typecode>

An invalid XPPB_Type code was supplied. This is a should-not-occur error. Contact CA Technical Support.

GSV3112I SSID from exec parm is <ssid>

The SSID <ssid> was successfully extracted from the supplied exec parm.

GSV3113I SSID not found in exec parm

No SSID was found in the exec parm.

GSV3114E Invalid SSID specification - <badssid>

An invalid SSID specification was found. The SSID should be specified as an EXEC card PARM= string as:

EXEC PGM=xxx,PARM='<xxx,xxx,..,>SSID=ssid<,xxx,xxx,...>'

The ssid must be 4 characters long. The first character must be uppercase alphabetic or national and the second second through fourth must uppercase alphabetic, national, or numeric.

GSV3115E Invalid SSID specification - <badssid>

An invalid SSID specification was found. The SSID should be specified as an EXEC card PARM= string as

EXEC PGM=xxx,PARM='ssid<,...>'

The ssid must be 4 characters long. The first character must be uppercase alphabetic or national and the second second through fourth must uppercase alphabetic, national, or numeric.

GSV3116I SSID <ssid> stripped from exec parm string

Informational only.

GSV3117I Exec parm processing type is <proctype>

Informational only.

GSV3118E Invalid SSID specification - //<ddn> DD DSN=<dsn>(<ssid>)

An invalid SSID specification was found. The SSID should be specified as the member name of a data set allocated to the ddname <ddn>:

//<ddn> DD DSN=<dsn>(<ssid>)

The ssid must be 4 characters long. The first character must be uppercase alphabetic or national and the second second through fourth must uppercase alphabetic, national, or numeric.

GSV3119I SSID from DDname <ddn> is <ssid>

The SSID <ssid> was successfully extracted from the member name specified on the ddname <ddn> allocation.

GSV3120I DDname <ddn> not allocated

Informational only.

GSV3121I <modname> initialization complete

Informational only.

GSV3122I <modname> termination in progress

Informational only.

GSV3123I Forcing problem state

Informational only.

GSV3124I Returning to supervisor state

Informational only.

GSV3125I <ddname> DCB located at <dcbaddr>

Informational only.

GSV3126W Locate <ddname> DCB failed

Informational only.

GSV3127E <func> failed, rc <rtncd> rsn <rsncd> ec <errcodes>

Informational only.

GSV3128E IVSK failed for module <modname> loadpt <lpaddr>

Informational only.

GSV3129E XCSVR GET_MODID for <modnm> <modaddr> <asid> failed, <errtext>

Informational only.

GSV3130E I/O error reading VTOC for volser <volser>

Informational only.

GSV3131E Invalid count found within VTOC extent for volser <volser>

Informational only.

GSV3132I Expected <cccc>.<hhhh>.<rr>.<kl>.<dlen>

Informational only.

GSV3133I Found <cccc>.<hhhh>.<rr>.<kl>.<dlen>

Informational only.

GSV3201E Server address space not active

Informational only.

GSV3134I Forcing supervisor state type 1

Informational only.

GSV3135I Forcing supervisor state type 2

Informational only.

GSV3136I Returning to problem state type 1

Informational only.

GSV3137I Returning to problem state type 2

Informational only.

GSV3202E <tasknm> task not active in server address space

Informational only.

GSV3204E GETMAIN for CSA storage failed

Informational only.

GSV3205E Cross memory POST of <tasknm> task failed

Informational only.

GSV3206I <req> request from job <job> ASID <asid> userid <user> received

Informational only.

GSV3207I <req> request from job <job> ASID <asid> userid <user> complete

Informational only.

GSV3208I <req> request processing started

Informational only.

GSV3209I <req> request processing complete

Informational only.

GSV3210E <req> request failed, rc <rc> rs <rs> ec <ec1> <ec2>

Informational only.

GSV3211E <req> request abended <abncmc>

Informational only.

GSV3212E <req> request failed, <failreason>

Informational only.

GSV3213I <rctext> <rstext>

Informational only.

GSV3214I RetCode <rc> RsnCode <rs> ErrCode <ec1> <ec2>

Informational only.

GSV3215E Locate <dspnm> dataspace failed, rc <rc>

Informational only.

GSV3216E Free <dspnm> dsp buff at <addr>/<alet> len <len> failed, rc <rc>

Informational only.

GSV3217I Elapsed time <elptm> cpu time <cputm>

Informational only.

GSV3218E Attach <modnm> failed, rc <rc>

Informational only.

GSV3219I <modnm> attached

Informational only.

GSV3220I <modnm> complete, rc <rc>

Informational only.

GSV3221E <modnm> failed, abend <abncmc>

Informational only.

GSV3222I Requests processed <reqct>

Informational only.

GSV3223I <reqnm> parameters

Informational only.

GSV3224I Qmgr <qmgr>

Informational only.

GSV3225I Queue <queuenm>

Informational only.

GSV3226I DDname <ddnm>

Informational only.

GSV3227I Dsname <dsnm>

Informational only.

GSV3228I Volser <vlsr>

Informational only.

GSV3229I <srvcnm> complete, SafRc <rc> RacRc <rc> RacRs <rs> Acee <addr>

Informational only.

GSV3230E User authentication failed

Informational only.

GSV3231I Token <tkn>

Informational only.

GSV3232I Keyword <kwd>

Informational only.

GSV3233I Value <val>

Informational only.

GSV3234I VSMLIST buffer allocated, addr <addr> len <len>

Informational only.

GSV3235I <modnm> storage cleanup started

Informational only.

GSV3236I <modnm> storage cleanup complete

Informational only.

GSV3237I Suspect storage located, addr <addr> len <len> sp <spn>

Informational only.

GSV3238I Member <mbrnm>

Informational only.

GSV3239W Max lines exceeded, <linect> lines discarded

Informational only.

GSV3240W Output incomplete, <cpusecs> second cpu limit exceeded

Informational only.

GSV3241I <pgm> SYSIN control cards

Informational only.

GSV3242I <ctlcard>

Informational only.

GSV3243I <pgm> SYSPRINT records total - <cnt>

Informational only.

GSV3244W <pgm> SYSPRINT records discarded - <cnt>

Informational only.

GSV3245I <pgm> SYSLIB dsname <dsn>

Informational only.

GSV3246I <cmd> <task> received from console <consname>

Informational only.

GSV3247I Parameters <parms>

Informational only.

GSV3248I Queue time <qtime>

Informational only.

GSV3249I <blknm> block freed

Informational only.

GSV3250I Waiting requestor posted

Informational only.

GSV3251E DATALIB <enqueue|dequeue> failed, <errcode>

Informational only.

GSV3252E DATALIB <enqueue|dequeue> failed, abend <abncod>

Informational only.

GSV3253I <Shared|Exclusive> ENQ unavailable for <datalibdsn>

Informational only.

GSV3254I ENQ retry <count> of <limit> in progress

Informational only.

GSV3255E ENQ retry attempts exhausted - limit of <limit> exceeded

Informational only.

GSV3256I <dsn> enqueued <enqtype>

Informational only.

GSV3257E Enqueue <dsn> <type> failed

Informational only.

GSV3258I <dsn> dequeued

Informational only.

GSV3259W Dequeue <dsn> failed, not enqueued

Informational only.

GSV3260W Enqueue <dsn> <enqtype> failed, already enqueued

Informational only.

GSV3261E <reqnm> failed, <reason>

Informational only.

GSV3262E <reqnm> failed, abend <abncd> <operation>

Informational only.

GSV3263W <reqnm> failed, <reason>

Informational only.

GSV3264I Checksum for <datatype> should be <chksum>

Informational only.

GSV3265I <reqnm> <started|completed>

Informational only.

GSV3266I DataKey <datakey> <type>

Informational only.

GSV3267I Format <fmt> Length <len> Number <num> Version <num> Type <type>

Informational only.

GSV3268I <Enqueuing|Dequeueing> DATALIB <dsname>

Informational only.

GSV3269I <Reading|Writing|Searching> <data|index> member <mbrname> <text>

Informational only.

GSV3270I Index not found, creating index

Informational only.

GSV3271I DataKey not found, creating new index entry

Informational only.

GSV3272I DataKey found, updating old index entry

Informational only.

GSV3273E DATALIB dataset name parameter required for <cmd> command

Informational only.

GSV3274I Dsname <dsname> <type>

Informational only.

GSV3275W Invalid <parmname> parameter, <reason>

Informational only.

GSV3276W Reverting to default minimum build number <build>

Informational only.

GSV3277I DataKey matched using minimum build <num>

Informational only.

GSV3278I Dsname <dsname(mbrname)> <type>

Informational only.

GSV3279I Allocating export target dataset <dsname>

Informational only.

GSV3280I Writing export target member <member>

Informational only.

GSV3281I Freeing export target dataset <dsname>

Informational only.

GSV3282E Invalid <parmname> parm, <reason>

Informational only.

GSV3283I <action> <dsname(member)>

Informational only.

GSV3284I "*IDENT" records removed - <count>

Informational only.

GSV3285I Descr <descr>

Informational only.

GSV3286I Descr <descr>

Informational only.

GSV3287I Checkpoint data for <member> has been bypassed. <reason>

A request to write checkpoint data has been bypassed.

GSV3300I Security init started

Informational only.

GSV3301I Security init complete

Informational only.

GSV3302I User authentication bypassed, not requested

Informational only.

GSV3303I User authentication bypassed, authorized application

Informational only.

GSV3304I Default security group set to <grpn> for userid <uid>

Informational only.

GSV3305I User authentication successful

Informational only.

GSV3306I User authentication bypassed, TCBSENV not zero

Informational only.

GSV3307I User authentication bypassed, not required for application

Informational only.

GSV3308I Calling SAF to authenticate user

Informational only.

GSV3309I Calling SAF to authenticate user and <password|passphrase>

Informational only.

GSV3310I Calling SAF to authenticate user, <password|passphrase>, and new <password|passphrase>

Informational only.

GSV3311I SAF group not requested

Informational only.

GSV3312I SAF group not retrieved, NSS-PC not available

Informational only.

GSV3313I SAF group <grpn> retrieved from task ACEE

Informational only.

GSV3314I SAF group <grpn> retrieved from address space ACEE

Informational only.

GSV3315I SAF group not available

Informational only.

GSV3316I SAF group not defined

Informational only.

GSV3317I SAF group defined as *

Informational only.

GSV3318I Loading security records

Informational only.

GSV3319I No security records loaded

Informational only.

GSV3320I DEFAULT group not found

Informational only.

GSV3321I ADMIN group not found

Informational only.

GSV3322I Security record init complete

Informational only.

GSV3324I SAF user authentication bypassed, authorized application

Informational only.

GSV3326I Calling "RACROUTE REQUEST=VERIFY,PASSCHK=YES"

Informational only.

GSV3327I Calling "RACROUTE REQUEST=VERIFY,PASSCHK=NO"

Informational only.

GSV3328I Request complete, SafRc <src> RacRc <rrc> RacRs <rrs>

Informational only.

GSV3329I XSys routine notified of user authentication

Informational only.

GSV3330I UserName set to <usrnm>

Informational only.

GSV3331I Security reinit started

Informational only.

GSV3332E <Password|Passphrase> not matched

Informational only.

GSV3333E <Password|Passphrase> expired

Informational only.

GSV3334E Userid not defined or access revoked

Informational only.

GSV3335E Invalid userid

Informational only.

GSV3336I Security file update started

Informational only.

GSV3337I Security file update complete

Informational only.

GSV3338E Security file update failed

Informational only.

GSV3339W Security file update bypassed, accessed read-only

Informational only.

GSV3340I Security file update bypassed, no changes made

Informational only.

GSV3341W Security file update bypassed, no user groups found

Informational only.

GSV3342I <Password|Passphrase> changed

Your password or passphrase was successfully changed.

GSV3344W SAF user authentication bypassed, environmental error

Informational only.

GSV3345I Command group processing started

Informational only.

GSV3346I Command group processing complete

Informational only.

GSV3347I Calling "RACROUTE REQUEST=VERIFY using PHRASE"

The user ID validation call to SAF was made using a password phrase instead of a password.

GSV3350I test

Informational only.

GSV3400I G-PVT allocation complete, size <size> address <addr>

Allocation of G-PVT storage (storage above the 2G bar) completed successfully.

GSV3401E G-PVT allocation failed, size <size> rc <rc> rsn <rsn>

Allocation of G-PVT storage (storage above the 2G bar) failed.

GSV3402I G-PVT limit has been increased from <oldlim> to <newlim>

The G-PVT storage limit (storage above the 2G bar) has been increased from <oldlim> to <newlim>.

GSV3403E G-PVT storage obtain failed, size <size> rc <rc> <reason>

A request to obtain G-PVT storage (storage above the 2G bar) from the SYSVIEW G-PVT storage manager failed.

GSV3404E G-PVT storage release failed, address <addr> <rc> <reason>

A request to release G-PVT storage (storage above the 2G bar) from the SYSVIEW G-PVT storage manager failed.

GSV3405E G-PVT storage obtain failed, routine <rtn> <offs> <len>

The request for G-PVT storage (storage above the 2G bar) The SYSVIEW session is terminated. Increase the MEMLIMIT of the application where SYSVIEW is running. The routine name <rtn>, offset <offs>, and length of storage requested are also displayed in the message.

GSV3500I API Init: ASID=<asid>, ASCB=<ascb>, TCB=<tcb>, RB=<rb>

An external API initialization call was requested for the address space represented by <asid> and <ascb> for the task represented by <tcb> and <rb>.

GSV3501I Connection requested for USERID=<userid>

An external API connection call was requested for <userid>.

GSV3502I Connection successful for USERID=<userid>

An external API connection call was requested for <userid> and has been successfully established.

GSV3503I Source ID=<cciid>

Originating CCI identifier for the external API connection request.

GSV3504I Server ID=<cciid>

Destination CCI identifier for the external API connection request.

GSV3505I Session ID=<cciid>

Session CCI identifier for the external API connection or disconnect call.

GSV3506I Disconnect requested for USERID=<userid>

An external API disconnect call was requested for <userid>.

GSV3507I Server msg: <text>

The external server returned message <text>.

GSV3508W Could not establish <type> signal handler

A signal handler for <type> could not be established. Failures of <type> will not be recovered.

GSV3509E Exception handled. <function> exiting with errors

A signal handler recovered an exception. The <function> will exit with errors.

GSV3510W Max handles reached <maxhandles>

An external API request was made but the maximum number of active requests <maxhandles> for the connection has already been reached.

GSV3511C Storage allocation failed. Obj=<object> rc=<rc> Loc=<location> size=<size>

A storage allocation request has failed.

GSV3512E Connection failed for USERID=<userid>

An external API connection call was requested for <userid> and has failed.

GSV3513E Buffer required for GET requests

An required buffer was not supplied for the GET request.

GSV3514E Buffer too small. Buffer=<size1>, Required=<size2>

A buffer of size <size1> was passed to the GET request and is too small. A buffer of size <size2> or larger is required. Reissue the request with a sufficiently sized buffer.

GSV3515W Column data is not available for request handle=<handle> <diag>

A GET request for column information could not be satisfied because there is no column information for this request.

GSV3516C <function>: CCI Error R=<ret> RC=<rc> XRC=<extrc> descr=<descr>

A CCI error has occurred.

GSV3517C <function>: Unexpected error rc=<rc>, rsn=<rsn>, errmsg <error>

An unexpected error has occurred in the communications module.

GSV3518C Signal exception was caught <signal>

Signal <signal> was raised and caught by the signal handler.

GSV3519C Abend code=<abend> reason code=<reason>

Signal SIGABND <abend> was caught by the signal handler.

GSV3520I <debug text>

Informational only.

GSV3521I Reserved

Reserved

GSV3522I Reserved

Reserved

GSV3523I Reserved

Reserved

GSV3524I Reserved

Reserved

GSV3525I Reserved

Reserved

GSV3526I Reserved

Reserved

GSV3527I Reserved

Reserved

GSV3528I Reserved

Reserved

GSV3529I Reserved

Reserved

GSV3530I Reserved

Reserved

GSV3531I Reserved

Reserved

GSV3532I Reserved

Reserved

GSV3533I Reserved

Reserved

GSV3534I Reserved

Reserved

GSV3535I Reserved

Reserved

GSV3536I Reserved

Reserved

GSV3537I Reserved

Reserved

GSV3538I Reserved

Reserved

GSV3539I Reserved

Reserved

GSV3540I Reserved

Reserved

GSV3541I Reserved

Reserved

GSV3542I Reserved

Reserved

GSV3543I Reserved

Reserved

GSV3544I Reserved

Reserved

GSV3545I Reserved

Reserved

GSV3546I Reserved

Reserved

GSV3547I Reserved

Reserved

GSV3548I Reserved

Reserved

GSV3549I Reserved

Reserved

GSV3550I Application ID=<ident>

An application identified by <ident> is initializing the Java interface.

GSV3551E Request block not valid. Property=<propertyid>

An internal logic error has occurred. A request property <propertyid> could not be returned because the request block from the request is not valid.

GSV3552I Reserved

Reserved

GSV3553I Reserved

Reserved

GSV3554I Reserved

Reserved

GSV3555I Reserved

Reserved

GSV3556I Reserved

Reserved

GSV3557I Reserved

Reserved

GSV3558I Reserved

Reserved

GSV3559I Reserved

Reserved

GSV3560I Reserved

Reserved

GSV3561I Reserved

Reserved

GSV3562I Reserved

Reserved

GSV3563I Reserved

Reserved

GSV3564I Reserved

Reserved

GSV3565I Reserved

Reserved

GSV3566I Reserved

Reserved

GSV3567I Reserved

Reserved

GSV3568I Reserved

Reserved

GSV3569I Reserved

Reserved

GSV3570I Reserved

Reserved

GSV3571I Reserved

Reserved

GSV3572I Reserved

Reserved

GSV3573I Reserved

Reserved

GSV3574I Reserved

Reserved

GSV3575I Reserved

Reserved

GSV3576I Reserved

Reserved

GSV3577I Reserved

Reserved

GSV3578I Reserved

Reserved

GSV3579I Reserved

Reserved

GSV3580I Reserved

Reserved

GSV3581I Reserved

Reserved

GSV3582I Reserved

Reserved

GSV3583I Reserved

Reserved

GSV3584I Reserved

Reserved

GSV3585I Reserved

Reserved

GSV3586I Reserved

Reserved

GSV3587I Reserved

Reserved

GSV3588I Reserved

Reserved

GSV3589I Reserved

Reserved

GSV3590I <debug text>

Informational only.

GSV3591I Reserved

Reserved

GSV3592I Reserved

Reserved

GSV3593I Reserved

Reserved

GSV3594I Reserved

Reserved

GSV3595I Reserved

Reserved

GSV3596I Reserved

Reserved

GSV3597I Reserved

Reserved

GSV3598I Reserved

Reserved

GSV3599I Reserved

Reserved

GSV3600E <parmname> parameter required by <cmd> <prikwd> command

Informational only.

GSV3601E Data collection disabled for Parmlib: <member> Option: <option>

Data collection has been disabled for the specified option.

GSV3602E Data collection for Communications Storage Manager has failed

The request for CSM information has failed. Review prior error messages.

The collection of CSM data is controlled by the option MONITOR-CSM in the parmlib member TCPDATA.

A common reason for failure is the lack of required security authorizations. The user ID making the request must have access to one of the following security resources:

1 - Superuser authority - UID=0

2 - Class : FACILITY

Entity: BPX.SUPERUSER

Access: READ

3 - Class : SERVAUTH

Entity: IST.NETMGMT.sysname.SNAMGMT

Access: READ

GSV3603E Administrator authority is required

The requested action has failed because the user does not have SYSVIEW administrator authority

GSV3604I Data collection request for <type> has been <action>

An action has been taken for the specified data collection request.

GSV3605E Data collection type <type> is invalid

A request has been made for the specified data collection type. The type specified is invalid.

GSV3606E Data collection interval <interval> is invalid for type <type>

A request has been made to set the interval value for the specified data collection type. The interval value specified is invalid.

GSV3607E Data collection type <type> cannot be reset while collection is active

A request has been made to reset the status of all metrics for the specified data collection type. A reset cannot be performed while the collection for the type is active.

GSV3608I Data collection metrics for <type> have been reset

A request has been made to reset the status of all metrics for the specified data collection type.

GSV3609E Data collection metric <metric> <rsce1> <rsce2> was not found

A request metric was not found.

GSV3610E No <metric monitoring definitions found for data collection process <schedulefunction>

No data collection monitoring definitions were found to the data collection process specified by the event scheduling function. The data collection process will run, but no data will be collected.

GSV3620E Exception definition <keyword> is invalid

The exception definition contains invalid statements or keywords.

GSV3621E Exception definition failed. <reason>

An attempt was made to define or change an exception definition. The reason for failure is included.

GSV3622I Metric <metric> Rsce1 <rsce1> Rsce2 <rsce2> Rule <ruletype> Value <value> Warn <warning> Prob <problem> RC <rc>

Internal debugging message. Contact CA Technical Support for more information if this message is displayed.

GSV3650E <macro> request failed. RC=<rc> RS=<rs> DIAG0=<diag> DIAG1=<diag> DIAG2=<diag>

A coupling facility request has failed.

• macro - name of the request macro
• rc - return code
• rs - reason code
• diag - diagnostic information

GSV3700E <name> is not a valid JES subsystem

Informational only.

GSV3701W <jes> <name> subsystem call failed, RC=<rc> RS=<rs> <rs2>

A subsystem interface call to obtain information from JES subsystem <jes> failed. <name> is the name of the subsystem call that failed, <rc> is the return code from the SSOB, <rs> is the reason code, if any, from the <name> function and <rs2> is the second reason code, if any.

GSV3702E <sys> JES configuration module not found for JES version <ver>

A JES configuration module for system <sys> could not be found. Assemble a configuration module using the JES libraries for the current system and update the JES PARMLIB member.

GSV3703E Invalid JES configuration module <modname>

The JES configuration module <modname> is not a valid configuration module. Configuration modules must be reassembled with the macro library of the current release. Do not use configuration modules from a previous release.

GSV3704W JES service level <jl> does not match <mod> module level <cl>

JES service level <jl> does not match the JES configuration module service level <cl>. Either maintenance has been applied to JES and the configuration module <mod> was not reassembled or the wrong libraries were used to assemble the configuration module. Reassemble the JES configuration module using the libraries that match the JES maintenance applied to the current system.

GSV3705E Unsupported JES2 version [assign the version number for your book]

The version of JES [assign the version number for your book] is an unsupported JES version. Consult the Release Guide for supported JES versions.

GSV3706W JES is not active

The command entered requires information from JES, but JES is not active. Issue the command again when JES is active.

GSV3707E JES routines storage allocation failed for <name>, rtn <rtn>

The JES routines attempted to get storage but there was not enough storage to satisfy the request. <name> is the name for the area that could not be acquired and <rtn> is the name of the routine that tried to get the storage. Increase the region size for the address space and retry the request.

GSV3708W Invalid <cntlblk> control block ID <id>, <address>

An attempt was made to look at a JES control block, but the ID in the control block was invalid. The control block will not be used.

GSV3710E Unable to initialize for JES subsystem <subsys> <RC>

The required services were not available to initialize for the JES subsystem <subsys>.

GSV3711I <name> services initialization started

Informational only.

GSV3712I <name> services initialization ended

Informational only.

GSV3713I <name> services termination started

Informational only.

GSV3714I <name> services termination ended

Informational only.

GSV3715I Task posted by jobname

Informational only.

GSV3716I JOBS task cold start initiated

The JOBS task was either started with the COLD parameter or a modify command with the COLD parameter was issued. The JOBS task has initiated the cold start.

GSV3717E Parameters missing from JES PARMLIB line parmline

When processing the JES PARMLIB member, a line did not contain all of the necessary parameters. Check the JES PARMLIB member for documentation about the required parameters.

GSV3718E JES PARMLIB member parmname parameter is invalid - parmlib

When processing the JES PARMLIB member, one of the parameters was invalid. Check the JES PARMLIB member for documentation about the required parameters and their format.

GSV3721W <linecmd> line command not supported for <jes>

The line command entered is not supported for JES subsystem <jes>.

GSV3722W <function> <subfunc> function not supported for <jes>

The attempted function <function> <subfunction> is not available for JES subsystem <jes> at this time.

GSV3723W JES services not available for function <function>

A call was made for JES services but JES services were not available.

GSV3724E Error reading spool data for job <jobname> <jobnumber>

Multiple errors occurred while reading data from the JES spool. The subtask terminated and will not restart. Correct the problem with the JES spool and restart the subtask.

GSV3725W <command> command not supported for JES3

The command entered is not available for a JES3 system.

GSV3726W Error reading data for <ddname>

An error occurred while reading data for the <ddname> data set. The most likely cause of this error is the dataset was purged. The error indicated there was an I/O error reading spool.

GSV3727E <linecmd> line command is not valid for a nonheld job

The line command <linecmd> is invalid for a nonheld job. Clear the line command to continue.

GSV3728E <linecmd> line command is not valid for a held job

The line command <linecmd> is invalid for a held job. Clear the line command to continue.

GSV3729W <command> command not supported for JES2

The command entered is not available for a JES2 system.

GSV3730W Use WTOR command to view WTORs

The WTOR option is no longer available. Use the WTOR command to view WTORs.

GSV3731W <command> command not supported for JES <release>

The command entered is not available for the current JES release.

GSV3740W <Action> failed for dataset <dsname>, RC <rc> Rsn <rsn>

The action <action> for the JES data set <dsname> failed with return code <rc> and reason code <rsn>.

GSV3741W <action> abended for dataset <dsname>, abend code <abendcode>

The action <action> for the JES data set <dsname> abended with abend code <abendcode>.

GSV3742W The status for <jobname> <ddname> has changed

The status of job <jobname> or a job's data set has changed. The <ddname> variable will be the DD name of the job's data set. Issue the REFRESH subcommand to update the display, or clear the line command to continue.

GSV3743W Invalid spool volume specified - <splvol>

An invalid spool volume was specified. Use the SPOOLS command to list all valid spool volume names.

GSV3744W No output data sets for <jobname/jobnum>

There were no output data sets for the selected job. If the job selected is a transaction job, then it has not created any output data sets. Otherwise, the job might have created some output data sets but they have been deleted or requeued. Try selecting the job again.

GSV3745W Data set <dataset> cannot be displayed

The data set selected cannot be displayed. Either the data set is an internal reader data set, the data set name was invalid or the data set could not be found.

GSV3746W Job <jobname> <jobid> is no longer available

The job has been purged from the system and is no longer available.

GSV3747W <name> request failed, RC=<rc> RS=<rs>

A request failed to obtain information. The name of the request is <name>, <rc> is the return code from the service, and <rs> is the reason code.

GSV3748W Job name <jobname> is invalid

The job name entered is not a valid job name. The only valid characters for a job name are #, $, @, the letters A-Z and the numbers 0-9. Also, the job name cannot start with a number. In some cases, mask characters are okay. If you receive this message when the only thing invalid are mask characters, then the job name must be entered without mask characters.

GSV3749W No eligible output data sets to display

There were no eligible output data sets for the selected job. Output descriptors can only be displayed for output data sets that are closed.

GSV3750E <cmd> command requires a job name and/or job number

The <cmd> command was issued without either a job name or job number. Issue the command again, specifying at least a jobname or number.

GSV3752W Command interrupted by attention or time out

The active command was interrupted by either the user using the attention key or the loop prevention time out was about to occur. Enter another command to continue.

GSV3753E Output for job <jobname> is not active on this system

Output for job <jobname> is active on a device that is not attached to the current system. The delete line command cannot be used in this situation. Clear the field to continue.

GSV3754I Output is not on device <devname> anymore

The job is no longer active on device <devname>. Issue the REFRESH subcommand to update the display, or clear the line command to continue.

GSV3755E <x> line command is not valid for a job on the <xxxx> queue.

The <x> line command cannot be used for a job on the <xxxx> queue. Clear the line command to continue.

GSV3756E <linecmd> line command is valid only for an executing job

The line command <linecmd> is invalid for a nonexecuting job. Clear the line command to continue.

GSV3757E <linecmd> line command is valid only for an executing job

The line command <linecmd> is invalid for a nonexecuting job. Clear the line command to continue.

GSV3758E Job <jobname> <jobid> is not executing on this system

The action used on job <jobname> can only be used on jobs that are executing on the current system.

GSV3759E ASID not available for job <jobname>

The cancel command cannot be used for job <jobname> because detail data is not displayed for this job. Enter OPTION DETAIL to display detail data and then reissue the cancel command.

GSV3760I <command> <type> <function> processed

The <command> command was processed successfully.

GSV3761E <value> is an invalid value for <command> <type> <function>

The value specified with the <function> function is invalid.

Check the <command> documentation for valid parameters and options.

GSV3762E <cmd> <type> <func> command failed. See LISTLOG for details

An attempt to issue a command for the <cmd> command failed. Use the LISTLOG command to check for messages pertaining to the failed command.

GSV3763E Job <jobname> <jobid> is not on the right queue

The action used on job <xxxxxxxx> can't be performed because the job wasn't on the right JES queue. Check the documentation for information about the proper queue.

GSV3764E Job <jobname> <jobid> is not held

An attempt was made to release job <xxxxxxxx> but the job is not held.

GSV3765E Job <jobname> <jobid> is already held

An attempt was made to hold job <xxxxxxxx> but the job is already held.

GSV3766E Job <jobname> <jobid> has protected output. Use PROT option

An attempt was made to delete job <xxxxxxxx> but the job has protected output and the PROT option was not used. Enter the command again with the PROT option.

GSV3767E Job <jobname> <jobid> is not a batch job

An attempt was made to restart job <xxxxxxxx> but the job is not a batch job.

GSV3768W <cmd> <type> <function> <jobnum> <jobid> not valid for JES3

The <cmd> command was not valid for a job running on JES3.

GSV3799I Caller <caller> - <message> <data> <data> <data>

Informational only. Used for tracing.