Previous Topic: GSV0 - General Group 0, GSV1 - General Group 1Next Topic: GSV3 - General Group 3

Messages and Descriptions › All -G- Messages › GSV2 - General Group 2

GSV2 - General Group 2

GSV2001I Nucleus initialization phase 1 started

Informational only.

GSV2002I Nucleus initialization phase 1 complete

Informational only.

GSV2003I Nucleus initialization phase 2 started

Informational only.

GSV2004I Nucleus initialization phase 2 complete

Informational only.

GSV2005I UCB address table built at <addr> len <len> entries <enum>

Informational only.

GSV2006I I/O config change detected, rebuilding UCB address table

Informational only.

GSV2007E Member <mbr1> )INCLUDE <mbr2> invalid, invalid dataset name

Informational only.

GSV2008I Enter <cmnd> command with a valid option

Informational only.

GSV2009E 2009E GETMAIN for buffer storage failed, <linnum> lines discarded

Informational only.

GSV2010E <modid> req <reqno> failed in ASID <asid> - CPU time limit exceeded

Informational only.

GSV2011E @<4> req @<4> failed in ASID @<4> - #<6> milliseconds CPU time exceeded

Informational only.

GSV2012A Job <jobnm> ASID <asid> waiting for post of ECB at <addr>

Informational only.

GSV2013I Job <jobnm> ASID <asid> wait complete, ECB posted with cmc <cmc>

Informational only.

GSV2014E Load <modnm> failed, abend <abncmc>

Informational only.

GSV2015I <cmd> command started

Informational only.

GSV2016I <cmnd> command complete

Informational only.

GSV2017W GETJOBID not required, sysout services are already available

Informational only.

GSV2018I GETJOBID complete, sysout services are now available

Informational only.

GSV2019I Bad address encountered, SSCT <ssctaddr> ANCH <anchaddr>

Informational only.

GSV2020W No I/O loop limit of <lim> exceeded, command input stack flushed

Informational only.

GSV2021E Unable to determine VTOC extent for <volser>

Informational only.

GSV2022W Error occurred checking ssid <ssid>

Informational only.

GSV2023I <libtyp> member <mbrn> read from <dsnm>

Informational only.

GSV2024I <func> from <module>+<offset> <routine> rc <retcode> rs <rsncode> ct <count> lv <level>

Informational only.

GSV2025E Invalid scroll command - <cmd>

The command <cmd> is not a valid scroll command. This message should not occur. If it does it indicate an internal error. Note the circumstances in which the error occurred and contact CA Technical Support.

GSV2026I SET_DUB_DEFAULT bypassed, <feature> feature not requested

Informational only.

GSV2027I SET_DUB_DEFAULT bypassed, USS NO specified in OPTIONS PARMLIB

Informational only.

GSV2028W No master console available for command submission, using console id 0 (no console association)

Informational only.

GSV2029E All consoles in range <startrange> through <endrange> are already active

Informational only.

GSV2030E Keyword value required by <cmd> <kwd> <type>

Informational only.

GSV2031E <kwd2> keyword value required by <cmd> <kwd1> <type>

Informational only.

GSV2032E <kwd> is not a valid keyword for the <cmd> <type>

Informational only.

GSV2033E <kwd2> is not a valid <cmd> <type> <kwd1> keyword

Informational only.

GSV2034E Invalid subcommand - <subcmd>

Informational only.

GSV2035E Invalid line command - <linecmd>

Informational only.

GSV2036E <kwd2> keyword invalid for <cmd> <kwd1> <type>

Informational only.

GSV2037E Keyword <kwd> is ambiguous, enter more characters for exact match

Informational only.

GSV2038E Subcommand <subcmd> ambiguous, enter more characters for exact match

Informational only.

GSV2039E Line command <lncmd> ambiguous, enter more characters for exact match

Informational only.

GSV2040E <cmdname> <keyword> not supported

Informational only.

GSV2041E Value required by <kwd> keyword

Informational only.

GSV2042E <parmname> value required by <kwd> keyword

Informational only.

GSV2043E <kwd> is not a valid keyword

Informational only.

GSV2044E <kwd> is not a valid <parmname> keyword

Informational only.

GSV2045E <kwd> keyword invalid for <kwd> keyword

Informational only.

GSV2046E Keyword <kwd> is not valid on a SETDEFAULT entry

The specified keyword is not valid on a SETDEFAULT entry definition.

GSV2047I Installation verified for NSS-PC <type> module <modname>

Verification of the installation of the NonSpaceSwitch PC router or service module <modname> has completed successfully.

GSV2048W <cmdn> command not valid, no info lines displayed

The <cmdn> command is not valid because there are no info lines displayed.

GSV2049W <cmdn> command not valid, info lines not displayed

The <cmdn> command is not valid because info lines are not being displayed on the current screen (SET INFOLINE NO is in effect for the current display command).

GSV2050W <cmdn> command not valid, no scrollable info lines

The <cmdn> command is not valid because while info lines are defined and they are being displayed, none of the info lines are defined as scrollable.

GSV2051W <cmdname> command ignored, confirmation response ending

Informational only.

GSV2052I Added to command input stack:

Informational only.

GSV2053E Invalid function key

Informational only.

GSV2054E <subcmd> subcommand not valid from <cmd> command <scrn> screen

Informational only.

GSV2055E <lincmd> line command not valid for <fldname> <fldvalue>

Informational only.

GSV2056E <lincmd> line command not supported for remote system <sysname>

Informational only.

GSV2057I <modidnt> entered for <srvcnam>

Informational only.

GSV2058I <modidnt> complete

Informational only.

GSV2059I No ISGECA data from system <sysname>,<reason>

Informational only.

GSV2060I Calling <text>

Informational only.

GSV2061I Call to <text> completed

Informational only.

GSV2062I <text> entered

Informational only.

GSV2063I <text> returning to caller

Informational only.

GSV2064I <txt1> <txt2> <txt3>

Informational only.

GSV2065E <chainname> storage chain is corrupt

Informational only.

GSV2066E Abend <abncmc> processing <chnnm> storage chain

Informational only.

GSV2067I <modnm> release <rels> build <bld> asm on <date> at <time>

Informational only.

GSV2068I <text1> <text2> complete, rc <rtncd>

Informational only.

GSV2069E <parmname> parameter required by <cmdnm> <optnm> command

Informational only.

GSV2070E <lncmd> line command invalid on line specified

Informational only.

GSV2071E Invalid <mbrnm> PANELLIB record, <text>

Informational only.

GSV2072I <panelrec>

Informational only.

GSV2073E Load <panelnm> panel failed, see LISTLOG for details

Informational only.

GSV2074E Member <mbrnm> not found in panel library

Informational only.

GSV2075I Consecutive PA2 limit reached, session terminated

Informational only.

GSV2076E Invalid characters in hex format <value> parm

Informational only.

GSV2077E <optnm> option not supported at <osname> <oslevel>

Informational only.

GSV2078W <optnm> option ignored at <osname> <oslevel>

Informational only.

GSV2079I ASID <asid> inactive, switched to ASID HOME

Informational only.

GSV2080I Job <jobnm> ended, ASID <asid> inactive, switched to ASID HOME

The target ASID <asid> (requested by its job name <jobnm>) was found to be inactive and you have been automatically switched back to your home ASID as you requested by setting the SET MEMSWTHOME option to YES.

GSV2081E <cmnd> command not supported when executing under VM

Informational only.

GSV2082W Extended LPAR data not available, continuing with basic data

Informational only.

GSV2083I DSAB above requested for <dsnm> allocation

Informational only.

GSV2084I <cmdnm> command format <fmtnm> reinitialized for profile reload

Informational only.

GSV2085E NSS-PC processing failed, ssid <ssid> not defined

Informational only.

GSV2086E <cmdnm> is an internal-only command and cannot be directly executed

The command that was requested cannot be directly executed as a primary command. Typically, the requested command is initiated via a line command that requests additional information to be satisfied by the internal-only command.

GSV2087W <mbr> not found in <dsnm>

Informational only.

GSV2088E <mbr> not found in <dsnm>

Informational only.

GSV2089E <cmdnm> command rejected - already active at another level

Informational only.

GSV2090I <cmdnm> display data refreshed due to IO configuration change

Informational only.

GSV2091I IO configuration has changed

Informational only.

GSV2092E GETMAIN failed for <stgtype> storage

Informational only.

GSV2093W <macname> called in key <key>

Informational only.

GSV2094E <parmname> parameter too long, max length is <maxlen>

Informational only.

GSV2095E Member <mbrname> not found

Informational only.

GSV2096W <cmnd> command has been temporarily disabled

Informational only.

GSV2097I <ddname> ddname override accepted

Informational only.

GSV2098W <ddname> ddname override rejected

Informational only.

GSV2099E <ddname> ddname override failed

Informational only.

GSV2100I Capture request queue ECB posted

Informational only.

GSV2101E Locate ANCM anchor block failed

Informational only.

GSV2102E Capture task not active

Informational only.

GSV2103E Required @<5> NSS-PC services are not available

Informational only.

GSV2104E GETMAIN for CSA storage failed

Informational only.

GSV2105E Cross memory POST of capture task failed

Informational only.

GSV2106I Capture request from job <jobnm> ASID <asid> userid <usrid> received

Informational only.

GSV2107I Capture request from job <jobnm> ASID <asid> userid <usrid> received

Informational only.

GSV2108I CPRQE block freed

Informational only.

GSV2109I Requestor posted

Informational only.

GSV2110E CAPTURE feature not enabled

Informational only.

GSV2111I Results: rc <rc> rs <rs> ec <ec1> <ec2> tm <elptm> cpu <cputm> cnt <count>

Informational only.

GSV2112E <srvcnm> failed, <errtxt>

Informational only.

GSV2113I Name <capmbr> Desc <descr>

Informational only.

GSV2114I Parm <parms>

Informational only.

GSV2115I <modnm> <rtnnm> routine entered

Informational only.

GSV2116I Dataset <dsn> allocated on <vol>

Informational only.

GSV2117I Dataset <dsn> <actn>

Informational only.

GSV2118E <srvcnm> failed, rc <rtncd>

Informational only.

GSV2119E <ioactn> <iomode> failed, <errtext>

Informational only.

GSV2120E <ioemsg>

Informational only.

GSV2121W CAPTURE ignored, <cmnd> command data is already captured

Informational only.

GSV2122W CAPTURE ignored, <cmnd> command data is not formatted

Informational only.

GSV2123I Fatal error has occurred - flushing command stack

Informational only.

GSV2124I Command stack flush complete

Informational only.

GSV2125I Forcing capture session termination

Informational only.

GSV2126W CAPTURE ignored, <cmd> command data is unchanged from last CAPTURE

Informational only.

GSV2127E CAPTURE failed, <cmd> command data buffer control block not found

Informational only.

GSV2128E CAPTURE failed, <cmd> command data buffer control block not valid

Informational only.

GSV2129I <ioactn> <iomode> RTA <ttr> RBN <rbn>

Informational only.

GSV2130I Capture requested for <cmnd> command

Informational only.

GSV2131I Capture accepted, block count is <blkct>

Informational only.

GSV2132I Capture table of contents extended

Informational only.

GSV2133I Capture dataset extended, update DCB refreshed

Informational only.

GSV2134I Capture complete for <cmnd> command

Informational only.

GSV2135I <cmnd> data records unsorted

Informational only.

GSV2136E <ioactn> <iomode> failed, abend <abncmc>

Informational only.

GSV2137I <task> parms updated

Informational only.

GSV2138I <task> parms not updated - nothing changed

Informational only.

GSV2139I <jcltxt>

Informational only.

GSV2140E Value required for <kwd> keyword

Informational only.

GSV2141E Invalid <kwd> keyword value

Informational only.

GSV2142W <cmnd> command ignored, capture dataset already allocated

Informational only.

GSV2143I Capture dataset allocated

Informational only.

GSV2144I Compress data ignored, XCMPR COMPRESS failed, rc <rtncd>

Informational only.

GSV2145I Compress data ignored, no decrease in block count

Informational only.

GSV2146I Data compressed <percnt>, from <bfrblks> to <aftblks> blocks

Informational only.

GSV2147I CmdCt <cmdct> BlkCt <blkct> CmpCt <cmpct>

Informational only.

GSV2148I XDSSR GET_CAP failed for <mbrnm> in <dsnm>

Informational only.

GSV2149I Retry not requested for duplicate dsname error <daercd>

Informational only.

GSV2150I Retry not attempted - dsname was not date/time qualified

Informational only.

GSV2151I Retry attempts exhausted - limit of <limit> exceeded

Informational only.

GSV2152I Allocation retry <count> of <max> in progress

Informational only.

GSV2153I Capture index update started

Informational only.

GSV2154I <dsn>

Informational only.

GSV2155E Index <actn> failed, ec <errcd>

Informational only.

GSV2156E Index <actn> failed, rc <rtncd> ACBERFLG <errflg>

Informational only.

GSV2157W PUT direct rejected, retrying with PUT sequential

Informational only.

GSV2158E Index <actn> failed, rc <rtncd> RPLFDBK <fdbk>

Informational only.

GSV2159I Capture index update complete

Informational only.

GSV2160W Capture index update failed

Informational only.

GSV2161E Index <actn> failed, abend <abncmc>

Informational only.

GSV2162E Physical I/O error

Informational only.

GSV2163E <ioermsg>

Informational only.

GSV2164I Capture <tskid> termination cleanup started

Informational only.

GSV2165I Capture <tskid> termination cleanup complete

Informational only.

GSV2166W Capture index update bypassed

Informational only.

GSV2167W Capture index is empty

Informational only.

GSV2168I <enqtyp> ENQ unavailable for <idxdsn>

Informational only.

GSV2169I ENQ retry <rtynum> of <rtylim> in progress

Informational only.

GSV2170E ENQ retry attempts exhausted - limit of <rtylim> exceeded

Informational only.

GSV2171E Capture <actn> failed, ec <daerrcd>

Informational only.

GSV2172W Profile update ignored for task <tasknm> profile <profnm>

Informational only.

GSV2173E Specific capture dataset name already exists

Informational only.

GSV2174E <dsnam> cataloged to <volser>

Informational only.

GSV2175I <rc-desc> <rs-desc>

Informational only.

GSV2176E No capture dsname or hlqual specified

Informational only.

GSV2177I Allocating capture <type> <value>

Indicates a capture high level qualifier or data set name is being allocated.

GSV2178I Capture error cleanup started

Informational only.

GSV2179I Capture error cleanup ended

Informational only.

GSV2180E Verify capture index failed, <rsntxt>

Informational only.

GSV2181E OBTAIN for <dsn> on <vol> failed, rc <rc>

Informational only.

GSV2182E Capture dataset not DSORG=PS

Informational only.

GSV2183E Capture dataset DSNTYPE=<type> not supported

Informational only.

GSV2184E <ioemsg-part2>

Informational only.

GSV2185I QTim <time>

Informational only.

GSV2186I Escaping to mainline

Informational only.

GSV2187I Capture LISTLOG required by CAPTURE PARMLIB option

Informational only.

GSV2188I <optname> <optval>

Informational only.

GSV2189I Capture LISTLOG bypassed for CAPTURE PARMLIB option

Informational only.

GSV2190I Capture LISTLOG ignored, last command captured was LISTLOG

Informational only.

GSV2191I CAPTURE from job <jobnm> ASID <asid> userid <uid> complete

Informational only.

GSV2192I CAPTURE rc <rc> (<rctext>) rs <rs> (<rstext>)

Informational only.

GSV2193W CAPTURE from job <jobnm> ASID <asid> userid <uid> complete

Informational only.

GSV2194W CAPTURE rc <rc> (<rctext>) rs <rs> (<rstext>)

Informational only.

GSV2195E CAPTURE from job <jobnm> ASID <asid> userid <uid> complete

Informational only.

GSV2196E CAPTURE rc <rc> (<rctext>) rs <rs> (<rstext>)

Informational only.

GSV2197I <cmdname> bufl <bufl>-<ovh> recl <recl> rec/buf <rec/buf>

The active command <cmdname> uses data buffers of length <bufl> minus an overhead length of <ovh> and data records of length <recl> and the number of data records that will fit in a single buffer is <rec/buf>.

GSV2198W GETJOBID only supported for JES2

Informational only.

GSV2199I <debugtxt>

Informational only.

GSV2200I AMS request queue ECB posted

Informational only.

GSV2201E Server address space not active

Informational only.

GSV2202E <task> task not active in server address space

Informational only.

GSV2204E GETMAIN for CSA storage failed

Informational only.

GSV2205E Cross memory POST of <taskname> task failed

Informational only.

GSV2206I <task> request from job <jobnm> ASID <asid> userid <usrid> received

Informational only.

GSV2207I <task> request from job <jobnm> ASID <asid> userid <usrid> complete

Informational only.

GSV2208I <reqnm> request processing started

Informational only.

GSV2209I <reqnm> request processing complete

Informational only.

GSV2210E <reqnm> request failed, rc <rtncd> rs <rsncd> ec <errcd>

Informational only.

GSV2211E <reqnm> request abended <abncmc>

Informational only.

GSV2212E <reqnm> request failed, <errtxt>

Informational only.

GSV2213I Command: <amscmd>

Informational only.

GSV2214I RetCode <rtncd> RsnCode <rsncd> ErrCode <errcd1> <errcd2>

Informational only.

GSV2215E Locate <dspnm> dataspace failed, rc <rtncd>

Informational only.

GSV2216E Free <dspnm> dsp buff at <addr>/<alet> len <len> failed, rc <rc>

Informational only.

GSV2217I Elapsed time <elptm> cpu time <cputm>

Informational only.

GSV2218E Attach <modnm> failed, rc <rtncd>

Informational only.

GSV2219I <modnm> attached

Informational only.

GSV2220I <modnm> complete, rc <rtncd>

Informational only.

GSV2221E <modnm> failed, abend <abncmc>

Informational only.

GSV2222I Requests processed <reqct>

Informational only.

GSV2223I Queue time <qtim>

Informational only.

GSV2224I XSALR MOVE_TO_GPVT complete

Informational only.

GSV2225W XSALR MOVE_TO_GPVT bypassed, not required

Informational only.

GSV2226E XSALR MOVE_TO_GPVT failed, ZSTOR GET_PERM,LOC=64 failed

Informational only.

GSV2227W XSALR BUILD with LOC=64 failed, trying LOC=31

Informational only.

GSV2228I Command: <cmd>

Informational only.

GSV2229I <srvcnm> complete, SafRc <rc> RacRc <rc> RacRs <rs> Acee <addr>

Informational only.

GSV2230E User authentication failed

Informational only.

GSV2231I Waiting for subtask completion or STOP post

Informational only.

GSV2232I STOP post received

Informational only.

GSV2233I Subtask completed

Informational only.

GSV2234I Waiting for subtask completion or shutdown timeout

Informational only.

GSV2235W Shutdown time interval expired

Informational only.

GSV2236W Proceeding with forced DETACH of incomplete subtask

Informational only.

GSV2237I Installation verified for NSS-PC, token <tkn>

Verification of the installation of the NonSpaceSwitch-PC has completed successfully. The #PCSERV REQUEST=CALL token value is <tkn>.

GSV2238E NSS-PC has not been correctly installed

The SYSVIEW NonSpaceSwitch-PC has not been correctly installed.

GSV2239I CAMASTER services available

CAMASTER services are available.

GSV2240E CAMASTER services not available

CAMASTER services are not available.

GSV2241E Volume <vol> not mounted

An OBTAIN macro was issued to read the format-1 DSCB for a data set on the volume <vo> but the volume was not mounted.

GSV2242E Data set <dsn> not found on volser <vol>

An OBTAIN macro was issued to read the format-1 DSCB for the data set named <dsn> on the volume named <vol> but the data set was not found on the volume.

GSV2250I System names information has been built

Informational only.

GSV2251E Alias table is full for <sysname>, <alias> was not added

A request was made to add an alias name to a system name table entry. The alias table is full. Only 8 alias names can be defined to a system name entry.

GSV2252E Sysname <sysname> already exists

A request was made to define a new system name table entry. The system name already exists.

GSV2253I name> is <nametype> for system name <sysname>

Informational only.

GSV2254E Sysname <sysname> was not found

The requested system name was not found.

GSV2260E Keyword <keyword> is invalid in current definition

The specified <keyword> is invalid. For more information, see definition syntax in the parmlib member GROUPS.

GSV2261E Group "[set the product group or family]" is invalid

An invalid logical group name has been requested.

GSV2262E Group [set the product group or family] is invalid

The definition for the group is invalid.

GSV2263E Group [set the product group or family] instance <instance> type <type> already exists

A request to create a new group has failed. The combination of group, instance and type already exists.

GSV2264E Group [set the product group or family] instance @<8> type <type> was not found

The requested group does not exist.

GSV2265E Member <member> was not found in group [set the product group or family] type <type> instance <instance> type <type>

The <member> requested does not exist in the group.

GSV2266E Member <member> is already in group [set the product group or family] instance <instance> type <type>

A request has been made to add a member to a group. The member specified is already in the group.

GSV2267E Error allocating group storage

An error occurred while trying to create a new group. The required storage for the group is unavailable.

GSV2268I Group [set the product group or family] instance <instance> type <type> has been added

A new logical group has been created.

GSV2269I Member <member> added to group [set the product group or family] instance <instance> type <type>

A member has been added to an existing group.

GSV2270I Group [set the product group or family] instance <instance> type <type> has been deleted

A logical group has been deleted.

GSV2271I Member <member> deleted from group [set the product group or family] instance <instance> type <type>

A member has been deleted from an existing group.

GSV2272E Group names of type <type> are limited to <len> characters

A length of the group name is limited to the specified number of characters.

GSV2273E Group type <type> does not allow excluded members

An attempt to add an exclude member was made to a group type that does not support exclude members.

GSV2274I Member <member> is <not> a member of group [set the product group or family] type <type>

Indicates whether the specified member name is a member of the group.

GSV2275E Group [set the product group or family] was found but not with type <type>

The requested group does not exist as requested type

GSV2276E Group type <type> does not support an instance name

The requested group does not support an instance name.

GSV2280I VSM intercept installation complete

The VSM monitor intercept has been installed successfully.

GSV2281I VSM intercept activated

The VSM monitor has been activated.

GSV2282I VSM intercept de-activated

The VSM monitor has been de-activated.

GSV2283I VSM intercept uninstalled

The VSM monitor has been uninstalled.

GSV2284I VSM intercept anchor address <address> cleared

The VSM intercept anchor address was cleared as a result of a PRIVATEREM request.

GSV2288W VSM intercept removed while subsequent intercept installed

The VSM monitor intercept has been removed. Another intercept is installed.

GSV2289W VSM intercept removed while in use

The VSM monitor has been removed while in use.

GSV2290E VSM intercept installation failed, reason code = <rs>

The VSM monitor initialization has failed. Contact CA Technical Support.

GSV2291E VSM intercept activation failed

The VSM monitor activation process has failed.

GSV2292E VSM intercept de-activation failed

The VSM monitor de-activation process has failed.

GSV2293E VSM intercept uninstall failed

The VSM monitor un-install process has failed.

GSV2294E VSM intercept not installed. Unable to <action> VSM intercept

The VSM monitor intercept is not installed. The requested action could not be processed.

GSV2295E VSM data collection not initialized. Unable to <action>

The VSM data collector is not installed. The requested action could not be processed.

GSV2296I Reserved

Reserved

GSV2297I Reserved

Reserved

GSV2298I Reserved

Reserved

GSV2299E Error occurred during VSM intercept processing

An error has occurred during the VSM data collection process. Note any additional error messages and Contact CA Technical Support.

GSV2300I Timer event processing has been <status>

Indicates the status of the event scheduler.

status - Current status:

GSV2301I Timer events have been loaded from member <member>

Event scheduler definitions have been loaded from the specified parmlib member.

GSV2302I Timer event <event> scheduled at <date><time> Interval <int>

An event has been scheduled.

GSV2303I Timer event <event> has not been scheduled

The event has not been scheduled for today.

GSV2304I Timer event <event> has been <action>

An action was taken on an event.

action - Action code:

GSV2305E Timer event <event> was not found

A requested event was not found.

GSV2306I Timer event <event> is being processed

An event has been processed.

GSV2307I Timer event scan complete. Interval=<int>

The event scheduler has determined the interval until the next event.

GSV2308E Timer event <event> has invalid parm data

The event has invalid parameter data.

GSV2309I <name> ecb posted

This message is an internal debugging trace message for the event scheduler.

GSV2310E Invalid parameter <keyword> on event <event> function function <function>

An invalid parameter was specified on the "Parms" field of the event scheduler definition.

GSV2311E Function <function> has an invalid <parm> parameter

An invalid parameter was specified for the function.

GSV2312I <member> : <lineno> : <control> : <card>

The message is a diagnostic message produced while processing a parmlib member.

GSV2313E Service <service> request <req> failed. RC <rc> RS <rs> <msg>

A service request has failed.

GSV2314I <component> <service> <result> <reason text>

A component service request has completed. If the request failed, the reason will be displayed as either a text reason for "RC=nnnnnnnn RS=nnnnnnnn".

GSV2315I BLDL LibType <libtype> DDname <ddname> Dsn <dsn> TTR <ttr> Concat <concat>

The message is a diagnostic message produced while processing a parmlib member.

GSV2316I <request> LibType <libtype> <type> <count> DDname <ddname> Dsn <dsn>

The message is a diagnostic message produced while processing a parmlib member.

GSV2317I <request> LibType <libtype> DDname <ddname> Dsn <dsn(member)>

The message is a diagnostic message produced while processing a parmlib member.

GSV2318I <request> LibType <libtype> DDname <ddname> Dsn <dsn> <message>

A dynamic allocation request has been issued.

The variable fields in the message contain the following information:

GSV2319E <request> failed. RC=<rc> RSN=<rsn> <message>

A dynamic allocation request has been issued that failed.

The variable fields in the message contain the following information:

GSV2320E Timer event <event> definition contains errors

The event definition contains invalid statements or keywords.

GSV2321E Timer event <keyword> is invalid

The event definition contains invalid statements or keywords.

GSV2322E Function <function is not supported via a LIST in timer event <event>

The function specified cannot be specified as part of a LIST. The function must be scheduled as a primary event function.

GSV2323I Preallocated DDname <ddname> Dsn <dsn>

A dynamic allocation request has been issued for the specified ddname and data set name. The ddname was already allocated. If this ddname is currently in the JCL for the job, it can be removed.

The variable fields in the message contain the following information:

GSV2324E Preallocated DDname <ddname> Dsn <dsn> does not match

A dynamic allocation request has been issued for the specifIed ddname and data set name. The ddname was already allocated with a different data set name.

If this ddname is currently in the JCL for the job, it can be removed.

The variable fields in the message contain the following information:

GSV2325E LibType <libtype> <type> is not defined

A request has been made to use a data set that is not defined.

Possible values are:

GSV2326I <message text>

Internal debugging message. Contact CA Technical Support for more information if this message is displayed.

GSV2327I STATS LibType <libtype> DDname <ddname> Dsn <dsn> Records <count> Elapsed <elapsed> CPU <cputime>

A request has been made to read a member from a data set. The request resulted in <count> records being read.

GSV2328E Read <libtype> member <member>. <reason>

A request has been made to read a member from a data set. The request failed.

The variable fields in the message contain the following information:

GSV2329E Invalid DCB attributes found. LibType <libtype> Dsn <dsn> <reason>

A request has been made to open a data set. The DCB attributes do not match the required attributes.

GSV2330E LibType <libtype> Dsn <dsn> not found

A request has been made to retrieve a data set name for the specified libtype. A matching data set name does not exist.

GSV2331E A <libtype> data set name must be specified

A request has been made to retrieve a data set name for the specified libtype. A data set name was not specified.

GSV2332I <request> LibType <libtype> Dsn <dsn> directory cache has been <action> <address>

A directory for the specified data set has been added or deleted from cache.

GSV2333I <request> LibType <libtype> Dsn <dsn> was <message> in directory cache

A request was made to determine if a specific member was located in a data set directory list cache.

GSV2334W Timer event function <function> is obsolete.

The requested function is no longer a valid function.

Obsolete Function:

MQSDATA-SYSTEM - The function has been merged into the function MQSDATA-QMGRS.

GSV2349I Debug <text>

This message is an internal debugging trace message for the event scheduler.

GSV2350E Invalid audit event name <eventname>

An invalid audit event name has been specified.

GSV2351I Audit event <eventname> has been created

An request to write an audit event has been made.

GSV2352E Audit event message text must be specified

An request to write an audit event has been made. Message text was not specified.

GSV2353I Userid: <userid> Event: <eventname> Action: <action text>

A audited event has been performed.

GSV2370I Dynamic exit <exitname> has been <action>

A dynamic exit was been established or reused.

GSV2371E Dynamic exit <exitname> <action> has been failed. RC=rc RS=rs

A request to perform an action on a dynamic exit has failed.

For more information, see the return and reason codes documented under CSVDYNEXIT in the IBM manual: z/OS MVS Authorized Assembler Services Reference.

GSV2372E Dynamic exit <exitname> call has been failed. RC=rc RS=rs

A request to call a dynamic exit has failed.

For more information, see the return and reason codes documented under CSVDYNEXIT in the IBM manual: z/OS MVS Authorized Assembler Services Reference.

GSV2373E Dynamic exit <exitname> <routine> was not found

A request to modify a dynamic exit has failed.

GSV2380I Invalid user command <usercmd>

An invalid user command has been entered. The requested user command could not be found.

GSV2401I <pgm> <rels> <bld> started <time> <date>

Informational only.

GSV2402I <copyright>

Informational only.

GSV2403I Options <options>

Informational only.

GSV2404I <nnnnn> records written for <nnnnn> maps

Informational only.

GSV2405I <pgm> ended, rc <rc>

Informational only.

GSV2406I Ouput map summary

Informational only.

GSV2407I Type Records Length Name

Informational only.

GSV2408I xxxxx nnnnnnn nnnnnnn xxxxxxx...

Informational only.

GSV2409I Input //<ddname> DD DSN=<dsname>

Informational only.

GSV2410I Output //<ddname> DD DSN=<dsname>

Informational only.

GSV2411I Define storage records for <sectname>

Informational only.

GSV2412I Statement Tp At Dup Len Loctr

Informational only.

GSV2413I nnnnnnn xx xx xxxxxxxx nnnn xxxxxxxx

Informational only.

GSV2414I Symbol records for <sectname>

Informational only.

GSV2415I Statement Tp At Dup Len Loctr Name

Informational only.

GSV2416I nnnnnnn xx xx xxxxxxxx nnnn xxxxxxxx xxx...

Informational only.

GSV2417I Map records for <sectname>

Informational only.

GSV2418I Statement Tp At Dup Len Loctr Mt Name

Informational only.

GSV2419I nnnnnnn xx xx xxxxxxxx nnnn xxxxxxxx xx xxx...

Informational only.

GSV2420I Total section length is <totlen>

Informational only.

GSV2421E Invalid ADATA record version: <errvers>

Informational only.

GSV2422E Invalid ADATA record level: <errlvl>

Informational only.

GSV2423E Invalid ADATA record edition: <erredit>

Informational only.

GSV2424E LOAD failed for module <name>

Informational only.

GSV2425E Too many parameters, max is 12

Informational only.

GSV2426E Multiple assembler source programs (BATCH) not supported

Informational only.

GSV2427E Open failed for ddname <ddname>

Informational only.

GSV2428W No CSECTs or DSECTs defined

Informational only.

GSV2429E Map output suppressed due to assembly errors

Informational only.

GSV2430E Invalid parameter: <errparm>

Informational only.

GSV2431E I/O error reading ASMADATA records

Informational only.

GSV2432E Invalid ADATA compile unit start/end record

Informational only.

GSV2433E Invalid ADATA compile unit start/end record sequence

Informational only.

GSV2434E No ADATA compile unit start/end record pair found

Informational only.

GSV2435E Start of DSA not found

Informational only.

GSV2436E End of DSA not found

Informational only.

GSV2437I Map records for created DSA DSECTs

Informational only.

GSV2438I Map records for CSECTs with DSA fields removed

Informational only.

GSV2439I VM/CMS system ident <systemid>

Informational only.

GSV2440I VM/CMS install ident <installid>

Reserved

GSV2441I VM/CMS IPLed sysname <iplsysname>

Reserved

GSV2442I Reserved

Reserved

GSV2443I Reserved

Reserved

GSV2444I Reserved

Reserved

GSV2445I Reserved

Reserved

GSV2446I Reserved

Reserved

GSV2447I Reserved

Reserved

GSV2448I Reserved

Reserved

GSV2449I Reserved

Reserved

GSV2450I Reserved

Reserved

GSV2451I Reserved

Reserved

GSV2452I Reserved

Reserved

GSV2453I Reserved

Reserved

GSV2454I Reserved

Reserved

GSV2455I Reserved

Reserved

GSV2456I Reserved

Reserved

GSV2457I Reserved

Reserved

GSV2458I Reserved

Reserved

GSV2459I Reserved

Reserved

GSV2460I Reserved

Reserved

GSV2461I Reserved

Reserved

GSV2462I Reserved

Reserved

GSV2463I Reserved

Reserved

GSV2464I Reserved

Reserved

GSV2465I Reserved

Reserved

GSV2466I Reserved

Reserved

GSV2467I Reserved

Reserved

GSV2468I Reserved

Reserved

GSV2469I Reserved

Reserved

GSV2470I Reserved

Reserved

GSV2471I Reserved

Reserved

GSV2472I Reserved

Reserved

GSV2473I Reserved

Reserved

GSV2474I Reserved

Reserved

GSV2475I Reserved

Reserved

GSV2476I Reserved

Reserved

GSV2477I Reserved

Reserved

GSV2478I Reserved

Reserved

GSV2479I Reserved

Reserved

GSV2500W <uxltmod> module data ignored, invalid data in header

This message is logged when the data contained in the <uxltmod> module is not valid. The data is ignored and initialization continues.

GSV2501I <kwd> user translate set created from <uxltmod> version <ver>

The data found in the <uxltmod> module was used to build a user translate set named <kwd>. The data version is either 1 (r11.5 or older) or 2 (r11.6 or newer).

GSV2502W One or more default tables used for tables not supplied

This message is logged when the user translate set built contained one or more omitted table addresses. Default table addresses (from the STANDARD translate set) were used for the omitted addresses.

GSV2503I Format init, <cmdn> <fmtn> <scrn> <type> <flag>

Informational only.

GSV2504I Format modify, <type> <cmdn> <fmtn>

Informational only.

GSV2505I Service call to <modname> <rtnname> <text>

Informational only.

GSV2506I <srvcname> complete, rc <rtncd> rs <rsncd> ec <errcd>

Informational only.

GSV2507W No CPPL address returned by <srvcname>

Informational only.

GSV2508I Non-TMP TSO environment created

Informational only.

GSV2509I <modn> <subn> entered

Informational only.

GSV2510I Reshow same screen, <reason>

Informational only.

GSV2511I <modn> <subn> calling <srvn>

Informational only.

GSV2512W Module id name not equal to module name <modname>

Informational only.

GSV2513I Allocating dsname <dsn>

Informational only.

GSV2514I DDname <ddn> allocated

Informational only.

GSV2515I Opening ddname <ddn>

Informational only.

GSV2516I Writing <num> member <mbr> records

Informational only.

GSV2517I Closing ddname <ddn>

Informational only.

GSV2518I Freeing ddname <ddn>

Informational only.

GSV2519E <reqname> failed, <reason>

Informational only.

GSV2520E <reqname> failed, abend <abncd> <operation>

Informational only.

GSV2521I Deleting member <mbr>

Informational only.

GSV2522I Renaming member <oldmbr> to <newmbr>

Informational only.

GSV2523I Initializing dsname <dsn>

Informational only.

GSV2524W <reqname> failed, <reason>

Informational only.

GSV2525I Session initialization started

Informational only.

GSV2526I Session initialization complete

Informational only.

GSV2527I Elapsed time <elptime> cpu time <cputime>

Informational only.

GSV2528W RCE field RCEHVCommonStrt is not set

Informational only.

GSV2529W Using alternate method of determining GCOM region location

Informational only.

GSV2530E Unable to determine GCOM region location

Informational only.

GSV2531I Password <pswd> NewPass1 <newpswd1> NewPass2 <newpswd2>

Informational only.

GSV2532E New password same as password, specify password/newpass/newpass

Informational only.

GSV2533E New password confirmation reqd, specify password/newpass/newpass

Informational only.

GSV2534E New password not matched, specify password/newpass/newpass

Informational only.

GSV2535E New password confirmation required, specify newpass/newpass

Informational only.

GSV2536E New password not matched, specify newpass/newpass

Informational only.

GSV2537I CBUF <cbufaddr> UPT <uptaddr> PSCB <pscbaddr> ECT <ectaddr>

Informational only.

GSV2538I Non-TMP TSO I/O environment created, ECT <addr> (was <addr>)

Informational only.

GSV2539E NSS-PC failed, ASID <asid> is quiesced and not nonswappable

The NSS-PC has failed because the ASID <asid> is quiesced and is not nonswappable. Switch your target address space, un-quiesce the current target address space or make the current address space nonswappable.

GSV2540E Get <type> storage failed, len <len> loc <loc>

An attempt to get storage failed. The variables in the message are as follows:

GSV2541E Descr @<16>

Informational only.

GSV2542E <macname> rc <rc>

Informational only.

GSV2543E Free <type> storage failed, addr <addr> len <len>

An attempt to free storage failed. The variables in the message are as follows:

GSV2544I Non-TMP TSO I/O environment creation bypassed by appl request

Informational only.

GSV2545I Non-TMP TSO I/O environment destroyed, ECT <addr> (<addr> restored)

Informational only.

GSV2546I Non-TMP TSO I/O environment destruction not required

Informational only.

GSV2547I Non-TMP TSO I/O environment creation bypassed, not required

Informational only.

GSV2548I Non-TMP TSO I/O environment creation bypassed, already done

Informational only.

GSV2549W Invalid variable name, <reason> - <varname>

Informational only.

GSV2550W Invalid variable reference, <reason> - <varname>

Informational only.

GSV2551I <srvcnm> complete, SafRc <rc> RacRc <rc> RacRs <rs>

Informational only.

GSV2552I ActCmd <actcmd> CurCmd <curcmd> CpuTime <cputime> ElpTime <elptime> IOCt <ioct> CmdCt <cmdct>

A trace message logging statistics for the last command executed.

GSV2553I <statusparmoutput>

This message id is used to contain the output generated by the STATUS parameter of the SYSVIEW initialization parameters member. The messages using this identifier are written to the job log during SYSVIEW start-up. See the STATUS command help for more information on the content of these messages.

GSV2554I <statuscommandoutput>

This message id is used to contain the output generated by a "MODIFY <sysvid>,STATUS" command. The messages using this identifier are written to the job log and the console.

GSV2555I <parmliberrorrecord>

This message displays an invalid record found in a PARMLIB member. It is preceded by message GSVX580E which contains the name of PARMLIB member which contains the invalid record.

GSV2556I <invalidcommand>

This message displays an invalid console command received. It is preceded by message GSVX581E.

GSV2557I <func> complete, rc <rc> rs <rs>

Informational only.

GSV2558I <func> initialization complete

Informational only.

GSV2559E SYSCLONE value required but not available

When attempting to generate a name for an extended console the OPTIONS PARMLIB UseSysCloneInConsoleName parameter value was found to be YES but no value was found for the 31 system symbol.

GSV2560E <func> initialization failed, <reason>

Informational only.

GSV2561I Calling IEFPRMLB to read system parmlib member <name>

Informational only.

GSV2562I System configuration has been reloaded

A request has been made to reload the system configuration. The process of reloading the configuration is complete.

GSV2563I System configuration has been cached in the main anchor

The system configuration data has been stored and cached so that future new session can retrieve the information without the need for reading the parmlib.

GSV2564I System configuration has been retrieved from cache

The system configuration data has been retrieved from cache.

GSV2565E System configuration member <member> contains no options

The system configuration data member contains no options.

GSV2566E System configuration member <member> contained <count> errors

The system configuration data member contained errors.

GSV2567E System configuration invalid - <reason>

The system configuration data is invalid. A reason is provided.

GSV2568E System configuration invalid. <dsntype> data set not specified

The system configuration data is invalid. The specified data set type was not specified.

GSV2569E NSS-PC processing failed, CAAT block not found or invalid

The CAAT (CA Anchor Table) control block was not found or was found but its identifier was not correct. Note the circumstances in which the error occurred and contact CA Technical Support.

GSV2570E NSS-PC processing failed, SGAT block not found or invalid

The SGAT (SystemGlobalAnchorTable) control block was not found or was found but its identifier was not correct. Note the circumstances in which the error occurred and contact CA Technical Support.

GSV2571I SSID set to <ssid>

The SSID had been set to the value <ssid>.

GSV2572I SSID set to default <ssid>

The SSID had been set to the default value <ssid>.

GSV2573I Storage allocated total <tstg> above <astg> below <bstg>

This message is displayed in response to a QUERY STORAGE command. It contains the following variables:

These values include only storage allocated using SYSVIEW storage services.

GSV2574E Storage limit of <limit> exceeded, new level creation not allowed

An allocated storage limit of <limit> is in effect and you are at or over the limit. The creation of a new command execution level is not allowed.

GSV2575I <func> initialization started

Informational only.

GSV2576E <func> initialization failed

Informational only.

GSV2577I Class <class> entity @<254> access @<8>

Informational only.

GSV2578I <funcname> REXX function result: <result>

Informational only.

GSV2579I Userid <userid> ACEE <acee>

Informational only.

GSV2580I System global anchor table created

The SYSVIEW system global anchor table has been created. One table exists for all SYSVIEW instances.

GSV2581E CA Anchor Table was not found

The CA Anchor Table was not found. The CA Anchor Table is created using CA Common Services. CA Common Services must be started before SYSVIEW.

GSV2582E missing from new message list ???

The SYSVIEW system global anchor table has been created. One table exists for all SYSVIEW instances.

GSV2583E Unable to allocate storage for System Global Anchor Table

The storage request for SGAT failed.

GSV2584I Main anchor has been added to the System Global Anchor Table

The SYSVIEW main anchor has been added to the System Global Anchor Table.

GSV2585E Unable to allocate storage for the main anchor

The storage request for ANCM failed.

GSV2586E New <password|passphrase> same as current <password|passphrase>, re-enter new <password|passphrase>

The new <password|passphrase> can not be set to the current <password|passphrase>.

GSV2587E New <password|passphrase> confirmation reqd, re-enter new <password|passphrase>

The new <password|passphrase> needs to be confirmed, re-enter new <password|passphrase> information.

GSV2588E New <password|passphrase> not matched, re-enter new <password|passphrase>

The new <password|passphrase> was entered twice, but did not match. Re-enter the new <password|passphrase> information.

GSV2589I Anchor <anchor> SSID <ssid> Build <build> has been removed from the System Global Anchor Table

The SYSVIEW anchor has been removed from the System Global Anchor Table.

GSV2590I Default format address set to <addr>

The default format address has been set to address <addr>.

GSV2599E XSystem data length limit exceeded

A command was issued requesting xsystem data (XSDATA YES in effect) and the XSystem data length limit (specified in the XSYSTEM PARMLIB member with the XsdsGetCmdDataLenLimit parameter) has been exceeded. All data from the sending xsystem data server has been discarded.

GSV2600I Now accepting connections to <idn> on system <sysnm> ssid <ssid>

Informational only.

GSV2601I Now accepting requests at <ident> on system <sysnm> ssid <ssid>

Informational only.

GSV2602E Communication failed with system <sysnm> job <jobnm> server <srvr>

Informational only.

GSV2603I Sending <reqnam> request <seqno> to system <sysnm> job <jobnm> server <srvr>

Informational only.

GSV2604I Response <seqno> received from system <sysnm> job <jobnm> server <srvr> icid <icid> ocid <ocid>

Informational only.

GSV2605I <iotyp> <seqno> issued

Informational only.

GSV2606I <iotyp> <seqno> completed, icid <icid> ocid <ocid>

Informational only.

GSV2607I <bytes> bytes received from <cciid>

Informational only.

GSV2608E Invalid CCI origin id - <cciid>

Informational only.

GSV2609E Invalid data received, <errtxt>

Informational only.

GSV2610I <reqnam> request received from system <sysnm> job <jobnm>

Informational only.

GSV2611I <reqnam> request processing started

Informational only.

GSV2612I <reqnam> request processing complete

Informational only.

GSV2613E <reqnam> request not supported by <tsknm> task

Informational only.

GSV2614I Send <seqno> initiated to <cciid> length <len> cid <cid>

Informational only.

GSV2615I Send <seqno> completed to <cciid>

Informational only.

GSV2616I <reqnm> request rejected, <rsn>

Informational only.

GSV2617I Subtask <tskid> attached, id <cciid>

Informational only.

GSV2618I <cnt> subtask(s) now active

Informational only.

GSV2619I Subtask <tskid> <txt>, completion code <cmcd>

Informational only.

GSV2620I Subtask <tskid> detached

Informational only.

GSV2621I <ecbnam> ecb posted

Informational only.

GSV2622I <prcnm> process started

Informational only.

GSV2623I <prcnm> process complete

Informational only.

GSV2624I ReceiveSpecific issued to <cciid>

Informational only.

GSV2625I Init complete

Informational only.

GSV2626E Init failed

Informational only.

GSV2627I Server task posted for sync process

Informational only.

GSV2628I Waiting for stop post

Informational only.

GSV2629I Waiting for command from session partner

Informational only.

GSV2630I Subtask <tskid> requested sync

Informational only.

GSV2631I Subtask <tskid> init complete

Informational only.

GSV2632I Subtask <tskid> init failed

Informational only.

GSV2633I Stop ECB posted, terminating session

Informational only.

GSV2634E Init failed, abend <abndcmc>

Informational only.

GSV2635I Subtask <tskid> posted to stop

Informational only.

GSV2636W Shutdown wait interval expired, any remaining subtasks will be detached immediately

Informational only.

GSV2637I ReceiveAny cancelled

Informational only.

GSV2638I ReceiveSpecific complete, icid <icid> ocid <ocid>

Informational only.

GSV2639I Initial command string received

Informational only.

GSV2640I <initialcmd>

Informational only.

GSV2641I Sending output datastream to cid <cid>, waiting for response

Informational only.

GSV2642I <datalen> <data>

Informational only.

GSV2643I Send complete, input datastream received, icid <icid> ocid <ocid>

Informational only.

GSV2644I Sending input datastream to cid <cid>, waiting for response

Informational only.

GSV2645I Send complete, output datastream received, icid <icid> ocid <ocid>

Informational only.

GSV2646I Calling interface SendScreen routine

Informational only.

GSV2647I Calling interface GetResponse routine

Informational only.

GSV2648I XSIOB addr <addr>

Informational only.

GSV2649I Sending EndSession to cid <cid>

Informational only.

GSV2650I Send EndSession complete

Informational only.

GSV2651I EndSession received

Informational only.

GSV2652I SPLIT/SWAP aid bytes <aidbytes>

Informational only.

GSV2653I Waiting for <cnt> minute(s) or for stop post

Informational only.

GSV2654I Send <totlen> total bytes to <cciid>

Informational only.

GSV2655I Send <seqno> segment <num> of <cnt> length <len> initiated to cid <cid>

Informational only.

GSV2656I Data segment <segno> of <totsegs> offset <offset> length <seglen> of total <totlen>

Informational only.

GSV2657I ReceiveSpecific request <seqno> issued for next data segment

Informational only.

GSV2658I Subtask <tskid> cancelled

Informational only.

GSV2659I Waiting for continue post

Informational only.

GSV2660I Continue ecb posted

Informational only.

GSV2661E MinBuild <nnnn> greater than MaxBuild <nnnn>, both set to CurBuild <nnnn>

Informational only.

GSV2662I Subtask <userid>.<sessid> suspended

Informational only.

GSV2663I Subtask <userid.<sessid> resumed

Informational only.

GSV2664I Waiting for post (1 receive, <nn> sends)

Informational only.

GSV2665I Waiting for post (1 receive, <nn> sends, <nn> subtasks)

Informational only.

GSV2666I All posts handled, active time <acttime> cpu time <cputime>

Informational only.

GSV2667I Posted, wait time <waittime>

Informational only.

GSV2668I XSys mode set to <mode> <description>

Informational only.

GSV2669I <cmd> command module <mod> loaded at <addr>

Informational only.

GSV2670E <req> request failed, invalid command name

Informational only.

GSV2671E <req> request failed, command <cmd> not found

Informational only.

GSV2672E <req> request not supported by <cmd> command

Informational only.

GSV2673E Load failed for <cmd> command module <mod>

Informational only.

GSV2674I Calling <cmd> command module <modname> at <epa>

Informational only.

GSV2675E <req> request failed, abend <cmc> in <cmd> command module <mod>

Informational only.

GSV2676I <cmd> command module <mod> returned

Informational only.

GSV2677I <cmde> command module entered

Informational only.

GSV2678I Calling <tsocpnam> to process XSCONN command

Informational only.

GSV2679I <tsocpnam> complete

Informational only.

GSV2680I Send screen routine entered

Informational only.

GSV2681I Get response routine entered

Informational only.

GSV2682I Escaping to mainline

Informational only.

GSV2683I ISND$$ routine entered

Informational only.

GSV2684I IGET$$ routine entered

Informational only.

GSV2685I Calling ISPF SPLIT command

Informational only.

GSV2686I Calling ISPF SWAP command

Informational only.

GSV2687I Second XSIDB received

Informational only.

GSV2688I Invalid second XSIDB received

Informational only.

GSV2689I Sending <xsidbtype> XSIDB

Informational only.

GSV2690I XSys-to-XSys connect request

Informational only.

GSV2691I Calling command processor

Informational only.

GSV2693I Abend retry complete

Informational only.

GSV2694I Escape to mainline complete

Informational only.

GSV2695I Command processing complete, terminating session

Informational only.

GSV2696I Termination started

Informational only.

GSV2697W <req> failed, no PutCmdData from <cmd> command module <mod>

Informational only.

GSV2698I <cmd> command module <mod> deleted

Informational only.

GSV2699E <feature> feature not enabled

Informational only.

GSV2700I <srvcnm> entered from <cmd> command

Informational only.

GSV2701I <reqnm> parm data supplied for <cmd> command

Informational only.

GSV2702I <req> complete, RecCount <nnnnn> RecLen <nnnnn> Varlen <nnnnn> TotLen <nnnnn>

Informational only.

GSV2703I <reqname> return regs: R15 <r15> R0 <r0> R1 <r1>

Informational only.

GSV2704E XSystem target <xstgtnm> not found

Informational only.

GSV2705W <kwd> <val> ignored for <req> request, IDEN option not specified

Informational only.

GSV2706W RecLimit <reclm> exceeded, LostCount <lstct>

Informational only.

GSV2707W System preference group <grpnm> type <grptp> not found

Informational only.

GSV2708E <srvcnam> call invalid in <xsmode> mode

Informational only.

GSV2709I <reqnm> select data supplied for <cmdnm> command

Informational only.

GSV2710E <reqnm> request failed, invalid XSCIB

Informational only.

GSV2711I <reqnm> response includes <datatype> data

Informational only.

GSV2712I Initial parameter block received

Informational only.

GSV2713I All data received from system @<8> job @<8> server <idnt>

Informational only.

GSV2714I Queued receive cancelled for system @<8> job @<8> server <idnt>

Informational only.

GSV2715I origin userid <uid1> authenticated as <uid2>

Informational only.

GSV2716I Notifying origin system of userid <uid> has been authenticated

Informational only.

GSV2717I Origin system notified userid <uid> has been authenticated

Informational only.

GSV2718I Connecting with authenticated userid <uid1> in place of userid <uid2>

Informational only.

GSV2719I Saving userid <uid> for system <sysn> and jobname <jobn>

Informational only.

GSV2720I Origin userid <uid> authenticated

Informational only.

GSV2721I Connecting with authenticated userid <uid>

Informational only.

GSV2722I Sending <reqtype> to cid <cid>, waiting for response

Informational only.

GSV2723I <len> <data>

Informational only.

GSV2724I Send <reqname> request complete, response received, icid <icid> ocid <ocid>

Informational only.

GSV2725I Connect complete to system <sysname> job <jobname>

Informational only.

GSV2726I Disconnect complete from system <sysname> job <jobname>

Informational only.

GSV2727I Sending disconnect to cid <cid>

Informational only.

GSV2728I Disconnect complete

Informational only.

GSV2729I Sending captured command data, waiting for next command

Informational only.

GSV2730I Receive complete, <reqname> request received

Informational only.

GSV2731I All data received

Informational only.

GSV2732I ReceiveSpecific <seqno> issued for next data segment

Informational only.

GSV2733I ReceiveSpecific <seqno> complete, length <len>, icid <icid> ocid <ocid>

Informational only.

GSV2734I <func> rc <rc> rs <rs> addr <addr> len <len> segm <segm>

Informational only.

GSV2735E Communication error, terminating session

Informational only.

GSV2736E Unrecoverable abend, terminating session

Informational only.

GSV2737I Command execution complete

Informational only.

GSV2738I Waiting for send completion or stop post

Informational only.

GSV2739I Waiting for receive completion or stop post

Informational only.

GSV2740I <reqname> data buffer freed, addr <addr> len <len>

Informational only.

GSV2741E No <type> definitions in PARMLIB member <member>

The zoom or action definition PARMLIB member <member> did not contain any valid DEFINE statements.

GSV2742E Invalid data length for structure <strname>

Module <modname> contains an internal data length of zero.

GSV2743E <type> command name <name> out of order

A zoom or action definition for command <name> was not in sorted order.

GSV2744E <type> command name <name> screen name @<8> out of order

A zoom or action definition for command <name> and screen name <name> was not in sorted order.

GSV2745E <type> command name <name> not found

A zoom or action definition contained a command name <name> that was not found in the command table.

GSV2746E Invalid field <field> in <type> definition <fromcmd> (<fromscrn>) <tocmd> (<toscrn>)

An invalid field name was found in the zoom or action definition represented by <fromcmd> <fromscrn> <tocmd> <toscrn>.

GSV2747I StopSess requested

Informational only.

GSV2748I Subtask <tskid> already posted to stop

Informational only.

GSV2749E <req> request failed, <reason>

Informational only.

GSV2750I Server build <sbld> <op> client build <cbld>

Informational only.

GSV2751I <reqnam> requested for <cmd> command

Informational only.

GSV2752E Failure on remote system, <errtxt>

Informational only.

GSV2800I Logger initialization complete

Indicates the completion of the initialization of the logger services component.

GSV2801I FC:<function code> RC:<return code> RSN:<reason code> Token:<logger services connection token> LS:<log stream name>

This message traces an interaction with the MVS System Logger. If the logger services parmlib member parameter DEBUG YES is specified, then this message is produced for all MVS System Logger interactions. Otherwise, only interactions which have completed with non-zero Return code, Reason code, or both are traced.

This message may be followed by one or more GSV2808 messages.

The Return and Reason codes for all MVS System Logger requests are defined by Equates produced by the IBM IXGCON macro. Descriptions of these Return and Reason codes may also be found in IBM publication z/OS MVS Programming: Assembler Services Reference.

GSV2802E <service name> failed. R15=<return code>

The service identified by the <service name> string has not completed successfully.

<return code> is the Return Code (in hex) received from the unsuccessful service.

The possible <service name> values are:

Descriptions of ENFREQ Return codes may be found in IBM publication z/OS MVS Programming: Authorized Assembler Services Reference.

GSV2803W System Logger ENF Listen Exit <status>.

The attempt to change the state of the MVS System Logger ENF Listen Exit was not successful.

This message may be preceded by one or more GSV2802E messages.

The possible values of the <status> portion of the message are:

GSV2805I <srvcnm> complete, rc <rtcd> rs <rscd>

Informational only.

GSV2806I <errtext>

Informational only.

GSV2807I <errtext>

Informational only.

GSV2808I <explanatory text>

This message provides an explanation of the MVS System Logger Return and Reason codes which were displayed in the immediately preceding GSV2801I message. For some Return/Reason code combinations, a series of these messages are produced.

The Return and Reason codes for all MVS System Logger requests are defined by Equates produced by the IBM IXGCON macro. Descriptions of these Return and Reason codes may also be found in IBM publication z/OS MVS Programming: Assembler Services Reference.

GSV2809E Message format error, template not found: <decid> (X'<hexid>')

This message is generated when a request to format a message failed because the message was not defined. The <decid> and <hexid> fields are the decimal and hex formats of the message identifier that were not defined.

GSV2850I PUTCACHE LibType <libtype> Dsn <dsn(member)> has been stored in cache <address>

The specified member has been stored in the library cache.

GSV2851I GETCACHE LibType <libtype> Dsn <dsn(member)> has been retrieved from cache <address>

The specified member has been retrieved from the library cache.

GSV2852E <action> LibType <type> Member <member> was not found in the cache

The requested member was not found in the library cache.

GSV2853E Invalid cache type specified

An incorrect library type has been specified.

GSV2854E Invalid cache compression interval

An invalid library cache compression interval has been specified.

GSV2855I Library cache has compressed <count> <type> members

A request has been made to compress a specific library type. The <count> field indicates the number of messages compressed.

GSV2856I <type> member <member> has been loaded

A request to load a member has been completed.

GSV2900E Keyword code <code> not supported

Informational only.

GSV2901E General keyword <kwd> does not support a command entry address

Informational only.

GSV2902E Command keyword <kwd> requires a command entry address

Informational only.

GSV2903I Setting keyword <kwd> to <value> length <len>

Informational only.

GSV2904I XPROR SET <kwd> return code is <rc>

Informational only.

GSV2905I Compare kwd <kwd> val <val> len <len> val <val> len <len>

Informational only.

GSV2906I Loading profile for <userid>

Informational only.

GSV2907I Profile initialization started

Informational only.

GSV2908E Profile load failed rc <retcode>

Informational only.

GSV2909I Profile initialization complete

Informational only.

GSV2910I Added new PROR DSA - level <lev>

Informational only.

GSV2911I Initializing profile general values

Informational only.

GSV2912I Initializing profile command values for <userid>

Informational only.

GSV2913I Debugging use

Informational only.

GSV2914I Initial profile <name> default <dflt> status <stat> owner <ownr>

This message is logged during profile initialization after the required profiles have been loaded. The variables have the following meanings.

GSV2950I Reserved

Reserved

GSV2951I Reserved

Reserved

GSV2952I Reserved

Reserved

GSV2953I Reserved

Reserved

GSV2954I Reserved

Reserved

GSV2955I Reserved

Reserved

GSV2956I Reserved

Reserved

GSV2957I Reserved

Reserved

GSV2958I Reserved

Reserved

GSV2959I Reserved

Reserved

GSV2960I Reserved

Reserved

GSV2961I Reserved

Reserved

GSV2962I Reserved

Reserved

GSV2963I Reserved

Reserved

GSV2964I Reserved

Reserved

GSV2965I Reserved

Reserved

GSV2966I Reserved

Reserved

GSV2967I Reserved

Reserved

GSV2968I Reserved

Reserved

GSV2969I Reserved

Reserved

GSV2970I Reserved

Reserved

GSV2971I Reserved

Reserved

GSV2972I Reserved

Reserved

GSV2973I Reserved

Reserved

GSV2974I Reserved

Reserved

GSV2975I Reserved

Reserved

GSV2976I Reserved

Reserved

GSV2977I Reserved

Reserved

GSV2978I Reserved

Reserved

GSV2997I Reserved

Reserved