Using Schedule Manager › Override Schedule Manager › System State Manager Resource Tables › SSM@OVER Command Formats

SSM@OVER Command Formats

The SSM@OVER commands and their formats are described below. Keywords are described in the following section.

• The SSM@OVER ADD command has the following syntax:

  SSM@OVER ADD
     {NAMES(table.resource,...)}
     {STATE(ON|OFF|UP|DOWN|ACTIVE|INACTIVE)}
     {FROM(hhmm)}
     {UNTIL(hhmm)}
     [DATE(mm/dd)]
     [RESET]
  

  Add links with the specified STATE to the specified resource NAMES in the @OVERRIDE@ schedule. Add the links in a temporary fixed date period with the specified DATE, the specified FROM start time, and the specified UNTIL end time. If DATE is not specified, then it defaults to the current date. After the links are added, perform a Schedule Manager RESET function if RESET was specified.

  Examples

  1. Command (and response) to add some temporary override links to turn some resources ON:

     SSM@OVER ADD NAMES(CICS_STCTBL.CICS,TSO_STCTBL.TCAS) STATE(ON) FROM(2200) UNTIL(2400)
     OPR1000I PROD.SSM@OVER: Override for CICS_STCTBL.CICS set ON at 2200-2400 03/31-03/31 added to @OVER000001.
     OPR1000I PROD.SSM@OVER: Override for TSO_STCTBL.TCAS set ON at 2200-2400 03/31-03/31 added to @OVER000001.
     OPR1000I SSM@OVER: Command completed with RC=0.
     

  2. Command (and response) to add some temporary override links to turn some resources OFF:

     SSM@OVER ADD NAMES(CICS_STCTBL.CICSTEST, TSO_STCTBL.TCASTEST) STATE(OFF) FROM(2200) UNTIL(2400)
     OPR1000I SSMQAN.SSM@OVER: Override for CICS_STCTBL.CICSTEST set OFF at 2200-2400 03/31-03/31 added to @OVER000001.
     OPR1000I SSMQAN.SSM@OVER: Override for TSO_STCTBL.TCASTEST set OFF at 2200-2400 03/31-03/31 added to @OVER000001.
     OPR1000I SSM@OVER: Command completed with RC=0.
     

• The f SSM@OVER CHANGE command has the following syntax:

  SSM@OVER CHANGE
     {NAMES(table.resource,...)}
     {STATE(ON|OFF|UP|DOWN|ACTIVE|INACTIVE)}
     {FROM(hhmm)}
     {UNTIL(hhmm)}
     [DATE(mm/dd)]
     [RESET]
  

  • Change existing links to the specified resource NAMES in the @OVERRIDE@ schedule. Change the links to the specified STATE and move them to a temporary fixed date period with the specified DATE, the specified FROM start time, and the specified UNTIL end time. If DATE is not specified, then it defaults to the current date. After the links are changed, perform a Schedule Manager RESET function if RESET was specified.
  • Example 1: Command (and response) to change a temporary override link from ON to OFF and move it to a different time on a different day:

    SSM@OVER CHANGE NAMES(TSO_STCTBL.TCAS) STATE(OFF) FROM(2100) UNTIL(2300) DATE(4/1)
    OPR1000I PROD.SSM@OVER: Overrides for TSO_STCTBL.TCAS deleted from @OVER000001.
    OPR1000I PROD.SSM@OVER: Override for TSO_STCTBL.TCAS set OFF at 2100-2300 04/01-04/01 added to @OVER000002.
    OPR1000I SSM@OVER: Command completed with RC=0.
    

  • Example2: Command (and response) to change a temporary override link from OFF to ON and move it to a different time on a different day:

    SSM@OVER CHANGE NAMES(TSO_STCTBL.TCASTEST) STATE(ON) FROM(2100) UNTIL(2300) DATE(4/1)
    OPR1000I PROD.SSM@OVER: Overrides for TSO_STCTBL.TCASTEST deleted from @OVER000001.
    OPR1000I PROD.SSM@OVER: Override for TSO_STCTBL.TCASTEST set ON at 2100-2300 04/01-04/01 added to @OVER000002.
    OPR1000I SSM@OVER: Command completed with RC=0.
    

• The SSM@OVER DELETE command has the following syntax:

  SSM@OVER DELETE
     {NAMES(table.resource,...)}
     [STATE(ON|OFF|UP|DOWN|ACTIVE|INACTIVE)]
     [FROM(hhmm)]
     [UNTIL(hhmm)]
     [DATE(mm/dd)]
     [RESET]
  

  Delete existing links to the specified resource NAMES in the @OVERRIDE@ schedule. Optionally, delete only links with the specified STATE, and only those in the temporary fixed date period with the specified DATE, the specified FROM start time, and the specified UNTIL end time.

  Example: Command (and response) to delete all temporary override links in an SSM resource table:

  SSM@OVER DELETE NAMES(CICS_STCTBL.*)
  OPR1000I PROD.SSM@OVER: Overrides for CICS_STCTBL.* deleted from @OVER000001.
  OPR1000I SSM@OVER: Command completed with RC=0.
  

• The SSM@OVER RESET command has the following syntax:

  SSM@OVER RESET
  

  This command causes the main Schedule Manager to perform a RESET function, resulting in the following:

  • The ACTIVE schedule and the @OVERRIDE@ schedule are reevaluated.
  • The desired states of System State Manager resources are set as scheduled.
  • The next scheduled RESET time (period start or stop) is recomputed.

  Example: Command (and response) to have Schedule Manager execute a RESET function:

  SSM@OVER RESET
  OPR1000I SSM@OVER: Command completed with RC=0.
  

• The SSM@OVER SHOW command has the following syntax:

  SSM@OVER SHOW
     {NAMES(table.resource,...)}
     [STATE(ON|OFF|UP|DOWN|ACTIVE|INACTIVE)]
     [FROM(hhmm)]
     [UNTIL(hhmm)]
     [DATE(mm/dd)]
     [RESET]
  

  Show existing links to the specified resource NAMES in the @OVERRIDE@ schedule. Optionally, show only links with the specified STATE, and only those in the temporary fixed date period with the specified DATE, the specified FROM start time, and the specified UNTIL end time. After the links are shown, perform a Schedule Manager RESET function if RESET was specified.

  Example: Command (and response) to show all temporary override links:

  SSM@OVER SHOW
  OPR1000I PROD.SSM@OVER: TSO_STCTBL.TCAS set OFF at 2100-2300 04/01-04/01 in @OVER000002. 
  OPR1000I PROD.SSM@OVER: TSO_STCTBL.TCASTEST set ON at 2100-2300 04/01-04/01 in @OVER000002.
  OPR1000I SSM@OVER: Command completed with RC=0.
  

The following Links Control panel shows the same example @OVERRIDE@ schedule shown earlier after all of the above example SSM@OVER commands have been executed. In this example, an L line command has been executed against the @OVER000002 period to display its links:

Schedule Manager ---------------- Links Control ----------------- System:OPS44R
Command ===>                                                  Scroll ===> CSR 
                                                                              
CMDS: A D I L LC LD LX + ++ - --              |         
---------------------------------------------- --------------------------------
___ -@OVERRIDE@                               |     -ACF2_STCTBL              
___  |-@OVER_MNIT  SMTWTFS          0000-0100 |      |-STASK                  
L__  |-@OVER000002 04/01            2100-2300 |      | |-ACF2                 
___  |-DEFAULT                                |     -CICS_STCTBL              
                                              |      |-STASK                  
                                              |      | |-CICS                 
                                              |      | |-CICSTEST             
                                              |     -DB2_STCTBL               
                                              |      |-STASK                  
                                              |      | |-DB2                  
                                              |     -IMS_STCTBL               
                                              |      |-STASK                  
                                              |      | |-IMS                  
                                              |     -JES2_STCTBL              
                                              |      |-STASK                  
                                              |      | |-JES2                 
                                              |     -TSO_STCTBL               
                                              |      |-STASK                  
                                              | OFF  | |-TCAS                 
                                              | ON   | |-TCASTEST             
                                              |