SMGR messages are generated by source management functions. The following list of CA Endevor SCM SMGR messages includes possible causes and corrective actions to take in error situations.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
You have tried to add an element with more than 99,999 lines. This exceeds the limit for CA Endevor SCM.
Action:
Break up the element, and resubmit the add request with elements having less than 99,999 lines.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
A premature end-of-file was encountered while reading the delta member. The symbolic literal indicates the type of error.
Action:
Contact your administrator.
Reason:
The data set that you specified in the add/update request does not contain any members.
Action:
Make sure that you have specified the external data set correctly, and resubmit the request.
Reason:
CA Endevor SCM encountered the named logic error when attempting to build a delta.
Action:
Contact your administrator.
Reason:
CA Endevor SCM supports a maximum of 65,535 inserts or deletes for any given change level of a component list. This limit has been exceeded.
Action:
Make the desired changes in groups that will result in fewer than the named number of inserts or deletes to the component list.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
The named amount of storage was not available.
Action:
Increase region size and re-execute the request.
Reason:
CA Endevor SCM encountered the named error while attempting to acquire initial storage.
Action:
Increase region size and re-execute the request.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
CA Endevor SCM did not find the delta member named in the message.
Action:
If the error is associated with the element, delete the element and restore it from a prior unload tape or archive file.
If the error is associated with the component list, use the DELETE action with only component option to delete the component list base and delta, and regenerate the element to recreate the component list.
Reason:
The data set associated with the base and delta libraries are the same.
Action:
Correct the base and delta data set names using the type definition panel.
Reason:
CA Endevor SCM did not find the expected control information in the named delta member.
Action:
If the error is associated with the element, delete the element and restore it from a prior unload tape or archive file.
If the error is associated with the component list, use the DELETE action with only component option to delete the component list base and delta, and regenerate the element to recreate the component list.
Reason:
Element delta does not contain a CA Endevor SCM control record.
Action:
If the error is associated with the element, delete the element and restore it from a prior unload tape or archive file.
If the error is associated with the component list, use the DELETE action with only component option to delete the component list base and delta, and regenerate the element to recreate the component list.
Reason:
The element delta contains an unrecognizable record.
Action:
If the error is associated with the element, delete the element and restore it from a prior unload tape or archive file.
If the error is associated with the component list, use the DELETE action with only component option to delete the component list base and delta, and regenerate the element to recreate the component list.
Reason:
CA Endevor SCM did not recognize the named delta member.
Action:
If the error is associated with the element, delete the element and restore it from a prior unload tape or archive file.
If the error is associated with the component list, use the DELETE action with only component option to delete the component list base and delta, and regenerate the element to recreate the component list.
Reason:
The element delta contains version and level delta identifiers that are out of sequence.
Action:
If the error is associated with the element, delete the element and restore it from a prior unload tape or archive file.
If the error is associated with the component list, use the DELETE action with only component option to delete the component list base and delta, and regenerate the element to recreate the component list.
Reason:
The insert count in the named member is not numeric.
Action:
If the error is associated with the element, delete the element and restore it from a prior unload tape or archive file.
If the error is associated with the component list, use the DELETE action with only component option to delete the component list base and delta, and regenerate the element to recreate the component list.
Reason:
The insert count in the delta control record does not match the number of inserts in the named member.
Action:
If the error is associated with the element, delete the element and restore it from a prior unload tape or archive file.
If the error is associated with the component list, use the DELETE action with only component option to delete the component list base and delta, and regenerate the element to recreate the component list.
Reason:
The delete count in the named member is not numeric.
Action:
If the error is associated with the element, delete the element and restore it from a prior unload tape or archive file.
If the error is associated with the component list, use the DELETE action with only component option to delete the component list base and delta, and regenerate the element to recreate the component list.
Reason:
The delete count in the delta control record does not match the number of deletes in the named member.
Action:
If the error is associated with the element, delete the element and restore it from a prior unload tape or archive file.
If the error is associated with the component list, use the DELETE action with only component option to delete the component list base and delta, and regenerate the element to recreate the component list.
Reason:
CA Endevor SCM has found a non-numeric insert line number in the named delta member.
Action:
If the error is associated with the element, delete the element and restore it from a prior unload tape or archive file.
If the error is associated with the component list, use the DELETE action with only component option to delete the component list base and delta, and regenerate the element to recreate the component list.
Reason:
CA Endevor SCM has found a non-numeric delete from line number in the named delta member.
Action:
If the error is associated with the element, delete the element and restore it from a prior unload tape or archive file.
If the error is associated with the component list, use the DELETE action with only component option to delete the component list base and delta, and regenerate the element to recreate the component list.
Reason:
CA Endevor SCM has found a non-numeric delete to line number in the named delta member.
Action:
If the error is associated with the element, delete the element and restore it from a prior unload tape or archive file. If the error is associated with the component list, use the DELETE action with only component option to delete the component list base and delta, and regenerate the element to recreate the component list.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
CA Endevor SCM did not find an end-of-file marker in the named delta file.
Action:
Contact your administrator.
Reason:
Internal error in BC1PRBLD. Requested version-level missing from the summary level chain.
Action:
Contact your administrator.
Reason:
CA Endevor SCM has encountered an error when attempting to access the base file.
Action:
See associated I/O error messages.
Reason:
CA Endevor SCM has encountered an end of file marker before it expected to do so.
Action:
If the error is associated with the element, delete the element and restore it from a prior unload tape or archive file.
If the error is associated with the component list, use the DELETE action with only component option to delete the component list base and delta, and regenerate the element to recreate the component list.
Reason:
CA Endevor SCM has encountered more lines than it expected in the file.
Action:
If the error is associated with the element, delete the element and restore it from a prior unload tape or archive file.
If the error is associated with the component list, use the DELETE action with only component option to delete the component list base and delta, and regenerate the element to recreate the component list.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
The requested spill slot is not valid.
Action:
Resubmit the request for a valid spill slot.
Reason:
A spill file error occurred.
Action:
Retry the request, and if the problem reoccurs contact your administrator.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
A spill file error occurred.
Action:
Retry the request, and if the problem reoccurs contact your administrator.
Reason:
A spill file error occurred.
Action:
Retry the request, and if the problem reoccurs contact your administrator.
Reason:
A spill file error occurred.
Action:
Retry the request, and if the problem reoccurs contact your administrator.
Reason:
CA Endevor SCM has attempted to place a record in the spill file that is too large for that file.
Action:
Enlarge the spill area, and retry the request.
Reason:
CA Endevor SCM has not been able to acquire spill storage.
Action:
Contact your administrator.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
CA Endevor SCM was unable to acquire initial storage to satisfy the request.
Action:
Increase region size and re-execute the request.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
CA Endevor SCM could not find the named member.
Action:
Make sure that you have specified the member name correctly, and resubmit the request.
Reason:
CA Endevor SCM has encountered an I/O error reading from the named data set and member.
Action:
See the accompanying I/O messages.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
CA Endevor SCM has detected changes in this element that are outside of the compare range specified on the type definition.
Action:
None.
Reason:
Informational message. CA Endevor SCM has detected changes in this element that are outside of the compare range specified on the type definition.
Action:
None.
Reason:
CA Endevor SCM has detected changes in this element that are outside of the compare range specified on the type definition.
Action:
None.
Reason:
There is not enough storage available for the request.
Action:
Increase region size and re-execute the request.
Reason:
CA Endevor SCM could not allocate a SYSOUT file for sort processing.
Action:
Act on the message that precedes this message.
Reason:
The external data set specified for the compare is empty.
Action:
Make sure that you have specified the data set name correctly, and resubmit the compare request.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
The reason for this error is contained in the previous message.
Action:
Act on the previous message.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
CA Endevor SCM has encountered an error when attempting to access the base file.
Action:
See accompanying I/O error messages.
Reason:
The file does not contain a logical end of file marker.
Action:
If the error is associated with an element, delete the element and restore it from a prior unload tape or archive file.
If the error is associated with a component list, use the DELETE action with only component option to delete the component list base and delta, and regenerate the element to recreate the component list.
Reason:
CA Endevor SCM supports a maximum of 99,999 inserts or deletes for any given change level of an element. This limit has been exceeded.
Action:
Make the desired changes in groups that will result in fewer than the named number of inserts or deletes.
Reason:
Internal error in BC1PRBLF. Delta version-level missing from the summary level chain.
Action:
Contact your administrator.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
CA Endevor SCM has encountered an error when attempting to create an element record in the master file for the named stage.
Action:
Contact your administrator.
Reason:
CA Endevor SCM has encountered an error when attempting to create an element record in the master file for the named stage. The return code is in decimals.
Action:
Contact your administrator.
Reason:
CA Endevor SCM has encountered more than one type record at the named location.
Action:
Contact your administrator.
Reason:
CA Endevor SCM attempted to build an element for the version and level specified. This version and level delta identifier does not exist.
Action:
Contact your administrator.
Reason:
The level number specified on the request is not within the range available for this element.
Action:
Check to make sure the level specified is correct, or remove the level number from the request.
Reason:
The record length of the delta library (size2) is not large enough to handle the component records created by CA Endevor SCM (size1).
Action:
The delta library must be a variable blocked file with a record length of size1. For more information, see the Installation Guide.
Reason:
The type record not defined at target location and the action is terminated.
Action:
Define the type at the target location, and redo the request.
Reason:
The source output library is a PDS. A PDS only supports eight character names.
Action:
Reduce the size of the element name to eight characters or less.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
You have submitted a request without specifying either an element or component.
Action:
Resubmit the request with the correct
Reason:
Informational message. The named element was deleted from the named stage.
Action:
None.
Reason:
CA Endevor SCM encountered an error when attempting to read the named master file.
Action:
Contact your administrator.
Reason:
CA Endevor SCM encountered an error when attempting to update the named master file.
Action:
Contact your administrator.
Reason:
CA Endevor SCM encountered an error when attempting to delete the named master file.
Action:
Contact your administrator.
Reason:
CA Endevor SCM has detected an occurrence of the element farther along the map that is not in sync with the element.
Action:
Promote this element along the map carefully. You may need to use the SYNC=Y option to do so.
Reason:
You have attempted to move or transfer an element to a location where a version of that element exists that is not in sync with the version being moved or transferred.
Action:
Retry the action specifying SYNC=Y.
Reason:
CA Endevor SCM has detected an occurrence of this element/component further along the map that is not in sync with this occurrence.
Action:
Promote this element along the map carefully. You may need to use the SYNC=Y option to do so.
Reason:
The element is not synchronized with the next occurrence of the element up the map. The option SYNC=Y was coded on the MOVE/TRANSFER SCL so the element at the target location will be synchronized.
Action:
No action required.
Reason:
The element is not synchronized with the next occurrence of the element up the map. The option SYNC=Y was coded on the MOVE/TRANSFER SCL so the element at the target location will be synchronized.
Action:
No action required.
Reason:
The element is not synchronized with the next occurrence of the element up the map. The option SYNC=Y was coded on the MOVE/TRANSFER SCL so the element at the target location will be synchronized.
Action:
No action required.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
Informational message. CA Endevor SCM has copied the element to the named stage.
Action:
None.
Reason:
Informational message. CA Endevor SCM has created the element at the specified location.
Action:
None.
Reason:
CA Endevor SCM has moved, updated, added, or transferred the element and found no differences between the element and a version of the element at the target location of the action
Action:
None.
Reason:
Informational message. The request resulted in a regression on the prior level of the element specified by deleting XX% of statements inserted or reinserting (or both) YY% of statements deleted in previous updates. Regression occurs when either XX or YY is greater than the threshold level specified in the associated element type record. This message is produced when REGRESSION SEVERITY=I on the type definition.
Action:
None. However, it is recommended that the current level be examined in detail to make sure that the deletes or reinserts (or both) in the current level were intended. If regression occurs frequently for this element type, contact the administrator to consider increasing the regression threshold.
Reason:
Informational message. The request resulted in a regression on the prior level of the element specified by deleting XX% of statements inserted or re-inserting (or both) YY% of statements deleted in previous updates. Regression occurs when either XX or YY is greater than the threshold level specified in the associated element type record. This message is produced when REGRESSION SEVERITY=W on the type definition.
Action:
None. However, it is recommended that the current level be examined in detail to make sure that the deletes or reinserts (or both) in the current level were intended. If regression occurs frequently for this element type, contact the administrator to consider increasing the regression threshold.
Reason:
Informational message. The request resulted in a regression on the prior level of the element specified by deleting XX% of statements inserted or reinserting (or both) YY% of statements deleted in previous updates. Regression occurs when either XX or YY is greater than the threshold level specified in the associated element type record. This message is produced when REGRESSION SEVERITY=C on the type definition.
Action:
None. However, it is recommended that the current level be examined in detail to make sure that the deletes or reinserts (or both) in the current level were intended. If regression occurs frequently for this element type, contact the administrator to consider increasing the regression threshold.
Reason:
Informational message. The request resulted in a regression on the prior level of the element specified by deleting XX% of statements inserted or reinserting (or both) YY% of statements deleted in previous updates. Regression occurs when either XX or YY is greater than the threshold level specified in the associated element type record. This message is produced when REGRESSION SEVERITY=E on the type definition.
Action:
Examine the current level in detail to make sure that the deletes or reinserts (or both) in the current level were intended. If regression occurs frequently for this element type, contact the administrator to consider increasing the regression threshold.
Reason:
Informational message. The request resulted in a regression on the base level of the element by deleting XX% of the original statements or inserting new statements equivalent to YY% of the base level (or both). Regression occurs when either XX or YY is greater than the maximum permissible level specified in the associated element type record. This message is produced when REGRESSION SEVERITY=I on the type definition.
Action:
None. However, it is recommended that the current version of the element be examined in detail to make sure that the deletes or re-inserts (or both) in the current level were intended. If regression occurs frequently for this element type, contact the administrator to consider increasing the regression threshold.
Reason:
Informational message. The request resulted in a regression on the base level of the element by deleting XX% of the original statements or inserting new statements (or both) equivalent to YY% of the base level. Regression occurs when either XX or YY is greater than the maximum permissible level specified in the associated element type record. This message is produced when REGRESSION SEVERITY=W on the type definition.
Action:
None. However, it is recommended that the current version of the element be examined in detail to make sure that the deletes or reinserts in the current level (or both) were intended. If regression occurs frequently for this element type, contact the administrator to consider increasing the regression threshold.
Reason:
Informational message. The request resulted in a regression on the base level of the element by deleting XX% of the original statements or inserting new statements (or both) equivalent to YY% of the base level. Regression occurs when either XX or YY is greater than the maximum permissible level specified in the associated element type record. This message is produced when REGRESSION SEVERITY=C on the type definition.
Action:
None. However, it is recommended that the current version of the element be examined in detail to make sure that the deletes or reinserts in the current level (or both) were intended. If regression occurs frequently for this element type, contact the administrator to consider increasing the regression threshold.
Reason:
Informational message. The request resulted in a regression on the base level of the element by deleting XX% of the original statements or inserting new statements (or both) equivalent to YY% of the base level. Regression occurs when either XX or YY is greater than the maximum permissible level specified in the associated element type record. This message is produced when REGRESSION SEVERITY=E on the type definition.
Action:
None. However, it is recommended that the current version of the element be examined in detail to make sure that the deletes or reinserts in the current level (or both) were intended. If regression occurs frequently for this element type, contact the administrator to consider increasing the regression threshold.
Reason:
Informational message. A request to Add or Update the element was not completed because no changes were made. The level number was not incremented.
Action:
None.
Reason:
Informational message. The element was successfully written to the named data set as the named member.
Action:
None.
Reason:
Informational message. The element was successfully written to the specified data set. The member name is the same as the element name.
Action:
None.
Reason:
Informational message. The element was not updated at the named stage because there were no changes detected in the element.
Action:
None.
Reason:
Informational message. The element was successfully created at the named stage by the move action.
Action:
None.
Reason:
Informational message. The sourceless element was successfully created at the named stage by the move action.
Action:
None.
Reason:
Informational message. The sourceless element was successfully updated at the named stage by the move action.
Action:
None.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
Informational message. The message indicates how many lines were inserted and how many deleted in the indicated level of the element.
Action:
None.
Reason:
Informational message.
Action:
None.
Reason:
Informational message.
Action:
None.
Reason:
Informational message.
Action:
None.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
Informational message. This message appears in the CA Endevor SCM log whenever a full image delta is created. Symbols VVLL represent the version and level of the element just created.
Action:
None.
Reason:
Invalid option when specified against a full image element along with the Print or Display element commands. Changes are not kept for full image delta elements. Each level reflects the exact image of the element.
Also invalid during a Move and Transfer action. Move and Transfer with the history option is invalid when an image delta file is being moved to a location where the target type is not defined as an image delta. Move and Transfer with history is only valid when both the source and target location type definition is set to image delta. This action will fail if the source location is other than image and the target location is image.
Action:
None.
Reason:
Internal error. During the create delta process, a table is maintained to cross-reference the source to target image delta member names. This error is generated when the new delta member name was not found using the source image member name as the key.
Action:
Contact CA Technical Support.
Reason:
When image members are copied from the source location to the target location via information stored in the delta file member, a source member could not be found in the data set. Action is terminated.
Action:
Contact CA Technical Support.
Reason:
Delta image records are missing from the external data set when attempting to restore image members for the element. Action is terminated.
Action:
Contact CA Technical Support.
Reason:
The delta image record's end-of-level indicator for the level number shown is missing from the external data set when attempting to restore image members for the element. Action is terminated.
Action:
Contact CA Technical Support.
Reason:
Internal error in BC1PSMGR. Requested version-level missing from the summary level chain.
Action:
Contact your administrator.
Reason:
CA Endevor SCM has encountered an error when attempting to close the named member.
Action:
See accompanying I/O error messages.
Reason:
CA Endevor SCM has encountered an error when attempting to delete the named member.
Action:
See accompanying I/O error messages.
Reason:
CA Endevor SCM has encountered an error when attempting to find the named member.
Action:
See accompanying I/O error messages.
Reason:
CA Endevor SCM has encountered an error when attempting to read the named member.
Action:
See accompanying I/O error messages.
Reason:
CA Endevor SCM has encountered an error when attempting to write to the named member.
Action:
See accompanying I/O error messages.
Reason:
A member with the requested element name already exists in the named library named in the following message.
Action:
Resubmit the request using a different element name.
Reason:
Informational message issued with message SMGR155E. This message names the library containing the member with the requested element name.
Action:
None.
Reason:
A 10-character element name cannot be used if the type's delta is reverse, image, or log format and the base is a PDS. The element name cannot be greater than eight characters. The action fails.
Action:
Retry the action using an eight-character element name.
Reason:
The record length of the source exceeds the maximum record length allowed for this type.
Action:
Classify the source under a type that allows the requisite record length.
Reason:
CA Endevor SCM detected an expanded include member in the source being added or updated.
Action:
Replace the expanded include member with a ++INCLUDE/-INC statement and resubmit the request.
Reason:
The statement referenced in the message has been discarded.
Action:
If the information in the statement is important, rewrite the statement as a valid statement and resubmit the job.
Reason:
The linkage editor control statement [STMT] requested a function that is not supported by CA Endevor SCM. The rejected statement was a NAME or ALIAS request. This message applies only to element types with an internal language specification of LINKEDIT.
Action:
None. However, the request to modify the name of the output load module created by the request was not executed.
Reason:
An element selected for editing using Quick-Edit is not synchronized with the next version of this element in its map.
Action:
Either cancel the edit session and resolve the synchronization problem prior to making new element modifications or continue the edit session and ignore the synchronization problems.
Reason:
CA Endevor SCM will perform delta consolidation on the named element.
Action:
None required, but you should be sure that you want CA Endevor SCM to perform the consolidation.
Reason:
Informational message. This message indicates the number of levels, the element will contain before consolidation.
Action:
None.
Reason:
Informational message. This message indicates the number of levels the element will contain after consolidation.
Action:
None.
Reason:
Informational message. This message indicates which levels will be consolidated at the indicated location.
Action:
None.
Reason:
This message indicates that the level just created is the highest allowable level number for the element.
Action:
If you anticipate further changes to this element, you must consolidate the delta levels.
Reason:
An add, update, move, or transfer action has resulted in a level number greater than 9996 at the target of the action. In addition, the base level at the target is such that the deltas cannot be consolidated.
Action:
Repeat the action specifying with history=n.
Reason:
An ADD, UPDATE, MOVE, or TRANSFER action has resulted in a level number greater than 9999 at the target of the action. In addition, the base level at the target is such that the deltas cannot be consolidated.
Action:
You can remove levels from the element by transferring it to another location, deleting the element from the source location, and transferring back to the original source location.
Reason:
The delete element extension record function failed.
Action:
Contact your administrator.
Reason:
The define element extension record function failed.
Action:
Contact your administrator.
Reason:
CA Endevor SCM attempted to move the MCF data from the source to the target location. This process failed.
Action:
Contact your administrator.
Reason:
CA Endevor SCM will perform aged delta removal on the named element.
Action:
None. Informational only.
Reason:
Internal error.
Action:
Contact your administrator.
Reason:
Informational message. This message indicates the number of levels the element/component will contain before aged levels are removed.
Action:
None.
Reason:
Informational message. This message indicates the number of levels the element/component will contain after aged levels are removed.
Action:
None.
Reason:
Informational message. This message indicates which levels will be consolidated into the base.
Action:
None.
Reason:
Internal error in BC1PRBMI. Delta version-level missing from the summary level chain.
Action:
Contact your administrator.
Reason:
Internal error in BC1PSMGR at CIMTRUTN. Delta version-level missing from the summary level chain.
Action:
Contact your administrator.
Reason:
Internal error in BC1PSMGR at CXDTRUTN. Delta version-level missing from the summary level chain.
Action:
Contact your administrator.
Reason:
The Change and History display options cannot be used on a log delta element. Only the current source is kept for this delta type.
Action:
None.
Indicates the source location of a sourceless element, if the element is not at the target location or the element at the target location is sourceless.
None.
An action or a display request was made against a log delta element and the action or request referred to a source level prior to the current level. With this delta type, only the current (last) level source is available.
Retry the action or request using a current source version level.
A reverse, forward, or image delta element cannot be converted to the target delta type of log. A log delta element cannot be converted to a target delta type of reverse, forward, or image. This condition can occur during a move or transfer action when a log delta element is targeted to a non-log delta location or when a non-log delta element is targeted to a log delta location.
Change your delta type definitions or perform the function using the Transfer to Archive action followed by Transfer from Archive.
Reason:
Informational message
Action:
None.
|
Copyright © 2014 CA.
All rights reserved.
|
|