SYN messages are generated by the catalog synchronization utility. The following list of SYN messages includes possible causes and corrective actions to take in error situations.
Reason:
Informational. Start of the Master Control File to catalog verification phase of the verification and synchronization process.
Action:
None.
Reason:
Informational. Start of the catalog to Master Control File synchronization phase of the verification and synchronization process.
Action:
None.
R/C = 12. An input environment statement was expected, but none was found. Processing is terminated.
Action:
Specify an environment statement and resubmit the command.
Reason:
Informational. Identifies the environment for which the synchronization process is starting.
Action:
None.
Reason:
Informational. Identifies the number of catalog segments created for the specified environment.
Action:
None.
Reason:
Informational. Identifies the number of catalog segments missing from the specified environment.
Action:
None.
Reason:
Informational. Identifies the number of catalog segments updated for the specified environment.
Action:
None.
Reason:
Informational. Identifies the number of old catalog segments found in the specified environment.
Action:
None.
Reason:
Informational. Identifies the number of elements processed from the specified environment.
Action:
None.
Reason:
R/C = 12. The environment specified by the user input does not exist in the C1DEFLTS table. Processing continues with the next environment.
Action:
None.
Reason:
R/C = 12. An Inventory Manager error occurred. Processing terminates.
Action:
See the next message for the actual error.
Reason:
R/C = 12. Internal error occurred. Processing terminates.
Action:
Contact CA Endevor SCM Technical Support.
Reason:
R/C = 12. Processing terminates.
Action:
Contact CA Endevor SCM Technical Support.
Reason:
R/C = 12. Processing terminates.
Action:
Refer to the parser literal and any other parser error log created by the utility. Correct the problem and resubmit job.
Reason:
Informational. Indicates the number of elements processed from all environments.
Action:
None.
Reason:
Informational. Indicates the number of catalog segments deleted for the specified environment.
Action:
None.
Reason:
Informational. Indicates the number of catalog segments in the specified environment that are orphaned.
Action:
None.
Reason:
Informational. Indicates the number of catalog segments processed for the specified environment.
Action:
None.
Reason:
Informational. Indicates the number of catalog segments processed for all environments.
Action:
None.
Reason:
R/C = 12. Processing is terminated.
Action:
Refer to messages contained in the job log.
Reason:
R/C = 12. An Inventory Manager error occurred. Processing terminates.
Action:
See the next message for the actual error.
Reason:
R/C = 12. Processing terminates. The execution statement did not specify update or validate.
Action:
Correct the PARM statement and resubmit the job.
Reason:
Informational. Identifies the number of element index records created for the specified environment.
Action:
None.
TOTAL # OF MISSING EINDEX RECORDS FOR ENV env-name: count
Reason:
Informational. Identifies the number of element index records missing in the specified environment.
Action:
None.
Reason:
Informational message. The utility found discrepancies between the MCF and the catalog. If the utility processed in update mode, it corrected the discrepancies. The step finished with RC 4.
Action:
None.
Reason:
R/C = 12. An error occurred while trying to retrieve the element’s long name from its delta file. The element is bypassed and the job continues to run. At end of processing, the job ends with a return code of at least 12.
Action:
See previous error messages for additional information.
Reason:
R/C = 8. For some reason unknown, a long named element did not have its name recorded in its delta file. The Master Control File element name is substituted for the long element name. Processing continues. At the end of processing, the job ends with a return code of at least 8.
Action:
Review all the elements that were created this way. If its name is invalid, retrieve the element, delete it from CA Endevor SCM, and then add the element back into CA Endevor SCM with its actual name.
Reason:
R/C = 8. For some reason unknown, the long named element was recorded incorrectly in its delta file. The Master Control File element name is substituted for the long element name. Processing continues. At end of processing, the job ends with a return code of at least 8.
Action:
Review all the elements that were created this way. If its name is invalid, retrieve the element, delete it from CA Endevor SCM, and then add the element back into CA Endevor SCM with its actual name.
Reason:
R/C = 4. An out of date element segment was found. The segment was updated with the Master Control File element data.
Action:
None.
Reason:
R/C = 4. An out of date element was found. The utility is running in validation mode, the catalog is not updated.
Reason:
R/C = 4. The catalog did not contain an element entry for the Master Control File element identified in the above message. A segment was created for it.
Reason:
R/C = 4. The catalog did not contain an element entry for the Master Control File element identified in the above message. The utility is running in validation mode, the catalog was not updated.
Reason:
R/C = 4. A catalog segment was found for a nonexistent Master Control File element record. The segment was deleted.
Reason:
R/C = 4. A catalog segment was found for a nonexistent Master Control File element record identified in the message above. The utility is running in validation mode, no changes are made to the catalog.
VAL messages are generated during processing of the Validate action. The following list of VAL messages includes possible causes and corrective actions to take in error situations.
Reason:
Informational. This message notifies you that the element master validation process has begun.
Action:
None.
Reason:
Error message. This message notifies you that the Restore action was executed for this element, but it has not been generated following the restore.
Action:
If this element is valid, consider executing the Generate action against it.
Reason:
Error message. This message notifies you that this element has not been generated since after the source was last changed.
Action:
If this element is valid, consider executing the Generate action against it.
Reason:
Error message. This message notifies you that the last time this element was generated, the generate failed.
Action:
If this element is valid, view the listing to determine why the generate action failed. Correct the error and generate the element.
Reason:
Error message. This message notifies you that this element is currently locked in a package.
Action:
None.
Reason:
Informational message. This message notifies you that the element master validation process is complete. The return code indicates if any element master validation errors were detected.
Action:
None.
Reason:
Informational message. This message notifies you that the synchronization validation process has begun.
Action:
None.
Reason:
Informational message. This message notifies you that a copy of the element was found up the logical map and it will be used in the synchronization validation process.
Action:
None.
Reason:
Informational message. This message notifies you of the location of the copy of the element found up the logical map that will be used in the synchronization validation process.
Action:
None.
Reason:
Informational message. This message notifies you that the two copies of the element are synchronized.
Action:
None.
Reason:
Informational message. This message notifies you that no other copy of this element was found up the logical map. Therefore, synchronization validation is not performed.
Action:
None.
Reason:
Informational message. This message notifies you that the synchronization validation process is complete. The return code indicates if any element synchronization validation errors were detected.
Action:
None.
Reason:
Informational message. This message notifies you that two copies of this element were found in the logical map. Therefore, a search for an in-between copy in the physical map is performed.
Action:
None.
Reason:
Informational message. This message notifies you that two copies of this element were found in the logical map. A search for an in-between copy in the physical map was performed and no copy exists.
Action:
None.
SEARCH FOR IN-BETWEEN COPY COMPLETE: HIGHEST RC = = nn
Reason:
Informational message. This message notifies you that the search for an in-between copy of this element in the physical map is complete. The return code indicates if an in-between copy of this element exists.
Action:
None.
Reason:
Warning message. The component validation option was specified, but the ASCM parameter in the C1DEFLTS table is not enabled.
Action:
Determine if the CA Endevor SCM Automated Configuration Manager option is available at your site. If so, talk to the Administrator to determine why it in not enabled.
Reason:
Informational message. The component validation option was specified, but no components exist for this element. Therefore, component validation processing is not performed for this element.
Action:
None.
NUMBER OF COMPONENTS VALIDATED: cmp-cnt, NUMBER CONTAINING ERRORS: error-cnt
Reason:
Informational message. The component validation option was specified. This message indicates how many components were validated and how many errors were detected.
Action:
None.
NO ACTION OPTIONS SPECIFIED – ALL VALIDATE ACTION OPTIONS WILL BE PERFORMED
Reason:
Warning message. None of the action options were specified. The validate action will assume all were specified.
Action:
None.
Reason:
An unexpected internal error occurred while attempting to obtain storage.
Action:
Contact your CA Endevor SCM Administrator.
Reason:
An unexpected internal error occurred. The element master address passed to the component validation program is invalid.
Action:
Contact your CA Endevor SCM Administrator.
|
Copyright © 2014 CA.
All rights reserved.
|
|