This Special Feature allows propagation of the Userid and password through a VTAM connection to the RDFGEX06 exit. Note, the feature is only valid with internal security. The options are:
N—No VTAM Userid/Password propagation
Y—VTAM Userid/Password propagation
This Special Feature permits you to disable the recognition of OPTCD=J. The options are:
N—Honor OPTCD=J
Y—Ignore OPTCD=J
Note: Activation of this feature is NOT recommended and should be done in a controlled environment only.
When a DJDE is associated with a report, a blank page is printed before the report. This Special Feature suppresses this blank page. The options are:
N—Blank Page printed
Y—No Blank Page printed
When a DJDE is associated with a bundle, a blank page is printed before the separator. This Special Feature suppresses this blank page. The options are:
N—Blank Page printed
Y—No Blank Page printed
This Special Feature permits you to always start the Archive tasks as external. The options are:
N—Standard Start
Y—External Start enforced
This Special Feature permits you to always start the Extract task as external. The options are:
N—Standard Start
Y—External Start enforced
This Special Feature permits you to suppress the sending of the DS980086 Archive Idle Message. The options are:
N Set interval to 5 minutes (default)
0,Y Do not send DC980086 message
1-9 Set interval to 1-9 minutes, where 1=1,2=2,..9
A-F Set interval to 10-15 minutes, where A=10,B=11,..F=15
G Set interval to 30 minutes
H Set interval to 60 minutes
I Set interval to 120 minutes
J Set interval to 240 minutes
K Set interval to 480 minutes
L Set interval to 720 minutes
M Set interval to 1440 minutes
This Special Feature permits you to set a custom interval for the sending of the DC980087 Extract Idle Messages. The options are:
N Set interval to 5 minutes (default)
0,Y Do not send DC980086 message
1-9 Set interval to 1-9 minutes, where 1=1,2=2,..9
A-F Set interval to 10-15 minutes, where A=10,B=11,..F=15
G Set interval to 30 minutes
H Set interval to 60 minutes
I Set interval to 120 minutes
J Set interval to 240 minutes
K Set interval to 480 minutes
L Set interval to 720 minutes
M Set interval to 1440 minutes
This Special Feature permits you to suppress the Manifest Banner page. The options are:
N—Print the Manifest Banner page
Y—Suppress the Manifest Banner page.
When Convert CC to Mach. (Y/N) ==> N is used on the Report Base Definition screen (VRDMU110), no carriage control changes.
When Convert CC to Mach. (Y/N) ==> Y is used on the Report Base Definition screen (VRDMU110), certain default carriage control characters are inserted. These inserted characters depend on FEAT013 setting:
The original special fix was designed to print the Separator pages in 6.0 the same format as in 5.1. CA Dispatch r11 added a new date format - mm/dd/yyyy in place of the old date format - yyddd. This Special Feature permits you to select the version of separator page to print. The options are:
N—Current r11 format with date as mm/dd/yyyy
Y—r5.1 offset with date as mm/dd/yyyy
6—Former r6.0 format with date as yyddd
5—Former r5.1 format with date as yyddd
This Special Feature uses the same unit to allocate volser preventing unallocation between tape mount. It should only be used when all of the tapes were created on the same device type. The options are:
N—No trace
Y—Trace requested.
This Special Feature permits you to print the Manifest Banner on the same page as the Manifest information. The options are:
N—Print the Manifest Banner on a separate page
Y—Print the Manifest Banner on the first Manifest page
This Special Feature permits you to request the use of the unit value specified in the sysgen VSGMU210 screen in place of the unit stored in the archived database record; with CA Dispatch r11, the unit value specified for ARCH1 will be used. The options are:
N—Use the unit used during the Archive function
Y—Use the unit specified on the VSGMU210 screen
This Special Feature permits you to put the Archive task in wait for a specific unit. The options are:
N—Reply can be unit addr or CANCEL
Y—Reply can be unit addr, WAIT or CANCEL
Note: This feature is designed to work only with External Archive, therefore FEAT006 is also required.
This Special Feature permits you to put the Extract task in wait for a specific unit. The options are:
N—Reply can be unit addr or CANCEL
Y—Reply can be unit addr, WAIT or CANCEL
Note: This feature is designed to work only with External Extract, therefore FEAT007 is also required.
This feature permits you to set the maximum number of RPO tasks required to satisfy your production needs. By default, the product is distributed with this value set to 1, but you can specify a maximum of 15 RPO tasks. We recommend changing this number only if your experience with this release indicates a need for faster bundle processing. The FEAT021 value is a single hexadecimal digit specified in the range of 1 to F.
When sending reports directly to the Archive class without an External Writer name, CA Dispatch cannot match a Report Definition to determine which media the Archived report will use. The default media is TAPE. This Special feature will allow the use of another media as the default. The options are:
T—Tape (default)
D—DASD
S—SMS
O—Optical
If the OV file fills and reports cannot be put into Online Viewing, the Archive task will automatically archive the reports. This allows a selection of a media other than tape for this archive procedure.
T=Tape (default)
D=DASD
S=SMS
O=Optical
This Special Feature allows the creation of separators when PASSTHRU=Y. The options are:
N—Do not create separators
Y—Create separators page
The options are:
N Normal AFP process
Y Omit normal AFP process for END Recipient Separator Page
The options are:
N No change to normal processing (no default installation)
1 Installation code = "CADS" Main Menu
2 Installation code = "CAOV" Online Viewing Main Menu
3 Installation code = "CAMSG" Online Viewing MSGCLASS
4 Installation code = "CARPT" Online Viewing Reports
5 Installation code = "CAAR" Archive Menu
6 Installation code = "CASG" Sysgen Menu
7 Installation code = "CARCP" End User, Online user viewing
These installation codes direct the end user to the specified main menu but upon exiting the screens, the Enter Next Task Code prompt appears. The '',X" option can be added to the end of the installation code to prevent the Enter Next Task Code prompt. When exiting the specified main menu, the session is ended with an automatic log off.
Additional options:
A Installation code = "CADS,X" Main Menu
B Installation code = "CAOV,X" Online Viewing Main Menu
C Installation code = "CAMSG, X" Online Viewing MSGCLASS
D Installation code = "CARPT,X" Online Viewing Reports
E Installation code = "CAAR,X" Archive Menu
F Installation code = "CASG,X" Sysgen Menu
G Installation code = "CARCP,X" End User, Online user viewing
Use the input report name as the output bundle writer name. The options are:
N No change to normal
Y The input report name is used as the bundle writer name
N-case sensitive, default
Y-case insensitive, match regardless of case
The options are:
Current offsets,
Date as mm/dd/yyyy,
No blank line above the MANIFEST block word
Current offsets,
Date as mm/dd/yyyy,
21 blank lines above the MANIFEST block word
r6.0 offset of time value (it is the same as r5.1 offset),
Date as mm/dd/yy,
No blank line above the MANIFEST block word,
Prints information introduced by later versions
r5.1 offset of time value,
Date as mm/dd/yy,
21 blank lines above the MANIFEST block word,
Prints information introduced by later versions
Looks like early r5.1 version without information
Introduced by later modifications, includes:
r5.1 offsets of all labels and values,
Date maintained as mm/dd/yy,
21 blank lines above the MANIFEST block word
The options are:
N No change to normal
Y One extra report info line is added to separator page.
The options are:
N No change to normal
Y Suppress a report DJDE
The options are:
N No change to normal
Y Suppress a default DJDE.
The options are:
N No change to extra lines and page breaks (default).
Y Suppress page breaks with lines per pages = 0 and suppress extra lines after DJDE packets. Treat both as in release 5.1.
The options are:
N Do not recognize VRDMU110 Special Feature Flags FEAT035 thru thru FEAT047 (normal default).
Y Recognize VRDMU110 Special Feature Flags FEAT035 thru FEAT047
*NOTE:
The options are:
Y Report is to be printed (normal default)
N Report is not to be printed.
The options are:
N Report is not to be downloaded to a PC (normal default)
Y Report is not to be downloaded to a PC.
If you set the default to 'Y' you must set FEAT042, 'Online Viewing', to 'Y' as well.
The options are:
N Report is not to be Archived (normal default)
D Report is to be archived to DASD.
O Report is to be archived to OPTICAL.
S Report is to be archived to SMS DASD.
T Report is to be archived to TAPE.
The options are:
D Report is to be archived to DASD.
O Report is to be archived to OPTICAL.
S Report is to be archived to SMS DASD.
T Report is to be archived to TAPE.
The options are:
D Report is to be archived to DASD.
O Report is to be archived to OPTICAL.
S Report is to be archived to SMS DASD.
T Report is to be archived to TAPE.
The options are:
D Report is to be archived to DASD.
O Report is to be archived to OPTICAL.
S Report is to be archived to SMS DASD.
T Report is to be archived to TAPE.
The options are:
N Report is not to use Passthru processing option (normal default).
Y Report is to use Passthru processing option
The options are:
N Report is not to be stored in Online Viewing (normal default).
Y Report is to be stored in Online Viewing
The options are:
Y Report is to use Convert CC processing option (normal default).
N Report is not to use Convert CC processing option.
The options are:
P Process report as normal (normal default).
D Delete report.
A Archive report.
O Store report in Online Viewing.
The options are:
N Report is not to use AFP Mixed Mode processing option (normal default).
Y Report is to use AFP Mixed Mode processing option.
Mutually exclusive with FEAT046 and FEAT047.
The options are:
N Report is not to use AFP Page Mode processing option (normal default).
Y Report is to use AFP Page Mode processing option.
Mutually exclusive with FEAT045 and FEAT047.
The options are:
N Report is not to use Embedded DJDE processing option (normal default).
Y Report is to use Embedded DJDE processing option.
Mutually exclusive with FEAT045 and FEAT046.
Formerly QS18048 in 6.0, this Special Feature adds an extra line:"*APPROXIMATE COST$ N/A*"
The options are:
N No extra line is added.
Y The additional line is included.
The options are:
N Suppress the x'8B' line, which is normally inserted between a default DJDE and the subsequent separator page (default).
Y Insert the x'8B' line between a default DJDE and the subsequent separator page.
The options are:
N Perform normal default processing.
Y Alter the number of Manifest page entries from 43 to 8.
The options are:
N Perform normal default processing.
Y Change position of Manifest page bar code bundle id information from offset +110 to offset +99.
|
Copyright © 2011 CA.
All rights reserved.
|
|