The Arcserve UDP 7000 series appliances are available in a variety of different models designed to meet your specific needs.
|
|
|
Arcserve UDP 7000 Series Appliance Specifications |
|
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Initial February 2015 launch in North America. Additional capacities and geographies planned Q3 2015. |
|||||||||||||
|
Appliance Model |
7100 |
7200 |
7200V |
7300 |
7300V |
||||||||
|
Backup Storage Capacity |
|
||||||||||||
|
Raw backup storage capacity* |
3 TB |
6 TB |
6 TB |
9 TB |
9 TB |
||||||||
|
Usable backup storage capacity** |
2.8 TB |
5.8 TB |
5.8 TB |
8.8 TB |
8.8 TB |
||||||||
|
Protected (source data) capacity*** |
Up to 8 TB |
Up to 17 TB |
Up to 17 TB |
Up to 26 TB |
Up to 26 TB |
||||||||
|
Standard Features |
|
||||||||||||
|
The unified management console, global deduplication, block level infinite incremental backups, compression, encryption, WAN optimized replication, advanced virtualization support, agentless backup, remote virtual standby, tape support, application consistent backups, granular restore, unified reporting and dashboard. |
|||||||||||||
|
On-Appliance Virtual Standby |
N/A |
N/A |
Up to 3 VMs |
N/A |
Up to 3 VMs |
||||||||
|
Warranty and Technical Specifications |
|
||||||||||||
|
Full system depot warranty |
|
3 Years |
|
||||||||||
|
Physical dimensions (H x W x D in inches) |
|
1.7" x 17.2" x 25.6" (1U - 19" Rack Mount rails provided) (4.3cm x 43.7cm x 65cm) |
|
||||||||||
|
Remote management & network interface ports |
|
1 x IPMI & 2 x 1 GbE (RJ45) |
|
||||||||||
|
Hard disk type & RAID configuration |
4 x 1 TB SAS (RAID 5) |
4 x 2 TB SAS (RAID 5) |
4 x 2 TB SAS (RAID 5) |
4 x 3 TB SAS (RAID 5) |
4 x 3 TB SAS (RAID 5) |
||||||||
|
External SAS port (for Tape Backup) |
None |
1 x IPASS |
1 x IPASS |
1 x IPASS |
1 x IPASS |
||||||||
|
Total system RAM |
16 GB |
16 GB |
32 GB |
32 GB |
48 GB |
||||||||
|
SSD drive (For deduplication hash tables) |
|
120 GB SSD |
|
|
240 GB SSD |
||||||||
|
Maximum weight |
|
41 lbs (18.6 kg) |
|
||||||||||
|
Power Supply |
|
1 x 600W |
|
||||||||||
|
Power consumption (Watts) |
|
|
|
|
|
||||||||
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
||||||||
|
AC voltage & frequency range (50-60 Hz) |
|
100v - 240v |
|
||||||||||
|
Ampere ratings (A) |
|
7.5A Max |
|
||||||||||
|
Environmental Specifications |
|
|
|
||||||||||
|
Operating temperature |
|
50°F ~ 95°F (10°C ~ 35°C) |
|||||||||||
|
Storage temperature |
|
-40°F ~ 140°F (-40°C ~ 60°C) |
|
||||||||||
|
Operating humidity (RH) |
|
8% ~ 90% (noncondensing) |
|
||||||||||
|
Operating altitude (Feet) |
|
N/A |
|
||||||||||
|
Maximum noise (dBA) |
|
N/A |
|
||||||||||
|
Typical cooling (BTU/Hour) |
|
|
|
|
|
||||||||
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
||||||||
|
Maximum cooling (BT/Hour) |
1356 |
|
1356 |
|
1356 |
||||||||
|
*1 TB = 1,000,000,000,000 bytes. ** On "V" models, space available for backup will be reduced by the size of virtual standby VMs. ***Estimated capacity assuming a typical 3:1 deduplication and compression ratio. Actual backup capacity may vary significantly, based upon data type, backup type, schedule, etc. |
|||||||||||||
|
Copyright © 2015 Arcserve.
All rights reserved.
|
|