The LJOB command lists job information from the CA Workload Automation SE database. Optional keywords and values are used to provide such job selection criteria as Julian date, time-of-day, number of DD statements, and job names. Information displayed can include job characteristics, scheduling parameters, interdependencies with other work, JCL, documentation, and so forth.
Use the LJOB command to list information about jobs. If scheduling has been intentionally suspended with a DEMAND,SET=SKP or NXTCYC command, the JOB INFORMATION section of the list indicates NXTCYC=SKP or NXTCYC=OFF.
This command has the following format:
┌─ , ─────────────────┐ ►►─ LJOB ─ , ─▼─┬─────────────────┬─┴─┬───────────────────────┬───────────────►◄ └─ keyword=value ─┘ └─ ,LIST= ─┬─ JOB ◄ ──┬─┘ └─ option ─┘
Optional keywords and values are used to provide job selection criteria. They can be used in any combination to list the desired jobs. LIST specifies format of display.
Keywords and acceptable values are as follows. Unless specifically indicated, there are no defaults for these keywords. If a keyword is not entered, jobs are listed regardless of that keyword's corresponding value in the database. If no keywords are provided, all jobs in the database are listed.
Note: For more information about most of the following keywords, see the DB.1, DB.10, or DB.11 panels in the Database Maintenance Guide.
Generic requests can generate too many pages of output for online terminals. If so, the message CA-7.020 results. To correct this problem, indicate a specific request. Alternatively, use the Batch Terminal Interface.
(Optional) Specifies to select jobs meeting minimum or (minimum,maximum) Julian date range in the date portion of the job definition panel field DONT SCHEDULE AFTER (YYDDD format).
Limits: 5 numeric characters from 00000 to 99999
Specifies to select jobs meeting minimum Julian date range.
Specifies to select jobs meeting minimum,maximum Julian date range.
(Optional) Specifies to select jobs with this value in the DB.11 panel field Agent.
Limits: 1 to 16 alphanumeric characters including ? and/or * mask characters
Specifies all agent names. This value is the default.
Defines a specific agent name.
Specifies all agent names matching the mask pattern.
(Optional) Specifies ARFSET names to select. See the job definition panel field ARFSET.
Limits: 1 to 8 alphanumeric characters including ? and/or * mask characters
Specifies all ARFSET names. This value is the default.
Defines a specific ARFSET name.
Specifies all ARFSET names matching the mask pattern.
Specifies that jobs with any ARFSETs defined should be selected.
Specifies that jobs with no ARFSETs defined should be selected.
(Optional) Specifies to select jobs meeting minimum or (minimum,maximum) time-of-day range in the time portion of the job definition panel field DONT SCHEDULE AFTER (hhmm format).
Limits: 4 numeric characters from 0000 to 2400
Specifies to select jobs meeting minimum time-of-day range.
Specifies to select jobs meeting minimum,maximum time-of-day range.
(Optional) Specifies to select jobs meeting minimum or (minimum,maximum) Julian date range in the date portion of the job definition panel field DONT SCHEDULE BEFORE (YYDDD format).
Limits: 5 numeric characters from 00000 to 99999
Specifies to select jobs meeting minimum Julian date range.
Specifies to select jobs meeting minimum,maximum Julian date range.
(Optional) Specifies to select jobs meeting minimum or (minimum,maximum) time-of-day range in the time portion of the job definition panel field DONT SCHEDULE BEFORE (hhmm format).
Limits: 4 numeric characters from 0000 to 2400
Specifies to select jobs meeting minimum time-of-day range.
Specifies to select jobs meeting minimum,maximum time-of-day range.
(Optional) Specifies to select jobs with this value in the job definition panel field CLASS/WLBClass.
Limits: 1 alphanumeric character from A to Z or 0 to 9
Specifies the class value of the job to select.
(Optional) Specifies to select jobs meeting minimum or (minimum,maximum) numeric value range in the job definition panel field COND-CODE (nnnn format).
Limits: 1 to 4 numeric characters from 0 to 4096
Specifies to select jobs meeting minimum numeric value range.
Specifies to select jobs meeting minimum,maximum numeric value range.
(Optional) Specifies to select jobs meeting minimum or (minimum,maximum) numeric percentage value range for CPU time as a percentage of elapsed time (nn format).
Limits: 1 to 2 numeric characters from 0 to 99
Specifies to select jobs meeting minimum numeric percentage value range.
Specifies to select jobs meeting minimum,maximum numeric percentage value range.
(Optional) Specifies to select jobs meeting minimum or (minimum,maximum) numeric value range in the job definition panel field CPU-TIME.
Limits: 5 numeric characters specified as mmmss, where mmm is minutes and ss is seconds
Specifies to select jobs meeting minimum numeric value range.
Specifies to select jobs meeting minimum,maximum numeric value range.
(Optional) Specifies to select jobs meeting minimum or (minimum,maximum) numeric value range for number of DD statements in its JCL (nnn format).
Specifies to select jobs meeting minimum numeric value range.
Specifies to select jobs meeting minimum,maximum numeric value range.
(Optional) Specifies the DRCLASS names to select. See the job definition panel field DRCLASS.
Limits: 1 to 8 alphanumeric characters including ? and/or * mask characters
Specifies all DRCLASS names. This value is the default.
Defines a specific DRCLASS name.
Specifies all DRCLASS names matching the mask pattern.
Specifies that jobs with any DRCLASS should be selected.
Specifies that jobs with no DRCLASS should be selected.
(Optional) Specifies to select jobs meeting minimum or (minimum,maximum) numeric value range in the job definition panel field LEAD-TIME DSN (nn format).
Specifies to select jobs meeting minimum numeric value range.
Specifies to select jobs meeting minimum,maximum numeric value range.
(Optional) Specifies to select jobs with this value if the job definition panel field DSN NOT FOUND. The value must be N or Y.
(Optional) Specifies to select jobs meeting minimum or (minimum,maximum) numeric value range in the job definition panel field CLOCK-TIME (hhmm format).
Specifies to select jobs meeting minimum numeric value range.
Specifies to select jobs meeting minimum,maximum numeric value range.
(Optional) Specifies to select jobs with this value in the job definition panel field EXEC. The value must be N or Y.
(Optional) Specifies to select jobs with this value in the job definition panel field HOLD. The value must be N or Y.
(Optional) Specifies to select jobs with this value in the job definition panel field JCL ID.
Limits: 1 to 3 numeric characters. The valid range is 0 to 254
(Optional) Specifies to select jobs with this value in the job definition panel field JCLLIB.
Limits: 2 to 16 alphanumeric characters beginning with an ampersand (&)
(Optional) Specifies to select jobs with this value in the job definition panel field JCL-OVRD. The value must be N or Y.
(Optional) Specifies job names to select. See the job definition panel field JOB.
Limits: 1 to 8 alphanumeric characters including ? and/or * mask characters
Specifies all job names. This value is the default.
Defines a specific job name.
Specifies all job names matching the mask pattern.
(Optional) Specifies to select jobs meeting minimum or (minimum,maximum) numeric value range in DB.1 panel field LEAD-TIME JOB (nn format).
Specifies to select jobs meeting minimum numeric value range.
Specifies to select jobs meeting minimum,maximum numeric value range.
(Optional) Specifies JOBNET names to select. See the job definition panel field JOBNET.
Limits: 1 to 8 alphanumeric characters including ? and/or * mask characters
Specifies all JOBNET names.
Defines a specific JOBNET name.
Specifies all JOBNET names matching the mask pattern.
(Optional) Specifies to select jobs meeting minimum or (minimum,maximum) numeric value range of the number of times the job completed later than scheduled due-out time (nnn format).
Specifies to select jobs meeting minimum numeric value range.
Specifies to select jobs meeting minimum,maximum numeric value range.
(Optional) Specifies the information to be listed for each job selected by the other keywords. If LIST is not specified on a generic request, a single line describing each job is output.
Specifies job data only. JOB is the default.
Specifies agent information only.
Specifies all data related to the job (for example, schedules, documentation, steps, DDs, requirements, networks).
Specifies jobs that are dependent on the job.
Specifies like ALL but excludes STEPDD information.
Specifies documentation information only.
Specifies report IDs associated with the job.
Specifies data set requirement information only.
Specifies exception requirements only (NEXT-RUN=SKIP or ONLY).
Specifies job requirement information only.
Specifies input requirements and output network information only.
Specifies input network requirements only.
Specifies user requirements only.
Specifies virtual resource requirements only.
Specifies schedule information only.
Specifies job, step, and DD statement information.
Specifies all jobs, data sets, and networks that trigger the job, as well as all jobs that are triggered by the job.
Specifies XPJOB information only.
(Optional) Specifies to select jobs meeting minimum or (minimum,maximum) Julian date range for date of last maintenance update to the database (YYDDD format).
Specifies to select jobs meeting minimum Julian date range.
Specifies to select jobs meeting minimum,maximum Julian date range.
(Optional) Specifies to select jobs meeting minimum or (minimum,maximum) time-of-day range for time-of-day of last maintenance update to the database (hhmm format).
Specifies to select jobs meeting minimum time-of-day range.
Specifies to select jobs meeting minimum,maximum time-of-day range.
(Optional) Specifies to select jobs depending on type of last database maintenance performed on them. The possible values are the following:
Specifies last maintenance by CA Workload Automation SE analyze commands.
Specifies last maintenance by CA Workload Automation SE database maintenance facilities.
Specifies last maintenance by CA Workload Automation SE LOAD process.
Specifies last maintenance by System Management Facility feedback.
(Optional) Specifies to select jobs meeting minimum or (minimum,maximum) Julian date range for date of the last run of the job (YYDDD format).
Specifies to select jobs meeting minimum Julian date range.
Specifies to select jobs meeting minimum,maximum Julian date range.
(Optional) Specifies to select jobs meeting minimum or (minimum,maximum) time-of-day range for time-of-day of the last run of the job (hhmm format).
Specifies to select jobs meeting minimum time-of-day range.
Specifies to select jobs meeting minimum,maximum time-of-day range.
(Optional) Specifies to select jobs with this value in the job definition panel field LTERM. The value is a logical terminal name.
Limits: 1 to 8 alphanumeric characters
(Optional) Specifies to select CPU jobs with this value in the job definition panel field MAINID or internal cross platform jobs according to job type.
Select all agent jobs.
Select CPU jobs with MAINID=ALL.
Select CPU jobs with MAINID=SYn (n is 1 to 7).
Select CPU jobs with MAINID=/SYn (not MAINID SYn, n is 1 to 7).
Select all XPJOB jobs.
Select all agent jobs with job type xxxx.
(Optional) Specifies to select jobs with this value in DB.1 panel field MAINT. The value must be N or Y.
(Optional) Specifies member names to select. See the job definition panel field Member.
Limits: 1 to 8 alphanumeric characters including ? and/or * mask characters
Specifies all member names. This value is the default.
Defines a specific member name.
Specifies all member names matching the mask pattern.
(Optional) Specifies to select jobs with this value in DB.1 panel field MSGCLASS. The value must be a 1 alphanumeric character message class.
(Optional) Specifies node names to select. See the DB.10 panel field XP Node.
Limits: 1 to 8 alphanumeric characters including ? and/or * mask characters
Specifies all node names. This value is the default.
Defines a specific node name.
Specifies all node names matching the mask pattern.
(Optional) Specifies to select jobs with DEMAND,SET=SKP or NXTCYC command functions active.
Specifies scheduling has been discontinued.
Specifies skip only the next scheduled run.
(Optional) Specifies to select jobs with this value in DB.1 panel field USE-OVRD-LIB. The value must be N or Y.
(Optional) Specifies owner values to select. See the job definition panel field OWNER.
Limits: 1 to 8 alphanumeric characters including ? and/or * mask characters
Specifies all owner values. This value is the default.
Defines a specific owner value.
Specifies all owner names matching the mask pattern.
(Optional) Specifies to select jobs with this value in DB.10 or DB.11 panel field PARMLIB.
Limits: PARMLIB can be one of the following:
1 to 3 numeric characters. The valid range is 0 to 254
2 to 16 alphanumeric characters beginning with an ampersand (&)
(Optional) Specifies to select jobs with this value in the job definition panel field PROMPTS. The value must be N or Y.
(Optional) Specifies to select jobs that have documentation defined through DB.4.1 panel. The value must be N or Y.
(Optional) Specifies to select jobs meeting minimum or (minimum,maximum) numeric value range (nnn format) in the job definition panel field PRTY/WLBPRTY.
Specifies to select jobs meeting minimum numeric value range.
Specifies to select jobs meeting minimum,maximum numeric value range.
(Optional) Specifies to select jobs meeting minimum or (minimum,maximum) numeric value range in DB.1 panel field REGION (nnnn format).
Specifies to select jobs meeting minimum numeric value range.
Specifies to select jobs meeting minimum,maximum numeric value range.
(Optional) Specifies to select jobs with this value in DB.1 panel field RELOAD. The value must be N, Y, or X.
(Optional) Specifies to select jobs meeting minimum or (minimum,maximum) numeric value range of the number of times the job has been restarted (nnn format).
Specifies to select jobs meeting minimum numeric value range.
Specifies to select jobs meeting minimum,maximum numeric value range.
(Optional) Specifies to select jobs with this value in the job definition panel field RETAIN-JCL. of the job definition panel field The value must be N or Y.
(Optional) Specifies to select jobs with this value in DB.1 panel field INSERT-RMS. The value must be N or Y.
(Optional) Specifies to select jobs with this value in the job definition panel field RO. The value must be one to two alphanumeric characters.
(Optional) Specifies to select jobs with this value in the job definition panel field REQUIREMENT-LIST. The value must be N or Y.
(Optional) Specifies to select jobs with this value in the job definition panel field RQMTS NOT USED. The value must be N or Y.
(Optional) Specifies to select jobs meeting minimum or (minimum,maximum) numeric value range of the number of times the job has been executed (nnnn format).
Specifies to select jobs meeting minimum numeric value range.
Specifies to select jobs meeting minimum,maximum numeric value range.
(Optional) Specifies to select jobs that have a calendar schedule defined. The value must be N or Y.
(Optional) Specifies to select jobs that can be restarted at step level. The value must be N or Y.
(Optional) Specifies to select jobs meeting minimum or (minimum,maximum) numeric value range of the number of job steps in its JCL (nnn format).
Specifies to select jobs meeting minimum numeric value range.
Specifies to select jobs meeting minimum,maximum numeric value range.
(Optional) Specifies system names to select. See the job definition panel field SYSTEM.
Limits: 1 to 8 alphanumeric characters including ? and/or * mask characters
Specifies all system names. This value is the default.
Defines a specific system name.
Specifies all systems matching the mask pattern.
(Optional) Specifies to select jobs meeting minimum or (minimum,maximum) numeric value range for the number of TYPE1 tape drives (nnn format). See the DB.1 panel field TAPE DRIVES. Selection is based on TYPE1 M value unless TYPE1 M is zero or less than for the specified TP1 minimum value; selection is then based on TYPE1 C value.
Specifies to select jobs meeting minimum numeric value range.
Specifies to select jobs meeting minimum,maximum numeric value range.
(Optional) Specifies to select jobs meeting minimum or (minimum,maximum) numeric value range in DB.1 panel field TYPE1 C (nnn format).
Specifies to select jobs meeting minimum numeric value range.
Specifies to select jobs meeting minimum,maximum numeric value range.
(Optional) Same as TP1C keyword except values are for field TYPE1 M.
Specifies to select jobs meeting minimum numeric value range.
Specifies to select jobs meeting minimum,maximum numeric value range.
(Optional) Same as TP1 keyword except values are for TYPE2 tape drives.
Specifies to select jobs meeting minimum numeric value range.
Specifies to select jobs meeting minimum,maximum numeric value range.
(Optional) Same as TP1C keyword except values are for field TYPE2 C.
Specifies to select jobs meeting minimum numeric value range.
Specifies to select jobs meeting minimum,maximum numeric value range.
(Optional) Same as TP1M keyword except values are for field TYPE2 M.
Specifies to select jobs meeting minimum numeric value range.
Specifies to select jobs meeting minimum,maximum numeric value range.
(Optional) Controls whether a job's last run date/time should be normalized to the time zone of the running CA Workload Automation SE.
Default: Specified by the TZDISPLAY keyword on the SMF initialization file statement.
Defines that the last run date/time should be normalized to the running CA Workload Automation SE time zone.
Defines that the last run date/time should be in the execution time zone.
(Optional) Specifies to select jobs with this value in the job definition panel field UID.
Limits: 1 to 3 numeric characters
(Optional) Used to select jobs with this value in the job definition panel field VERIFY. The value must be N or Y.
|
Copyright © 2013 CA Technologies.
All rights reserved.
|
|