Application-ID

ACTNAME

This is the APPLID name of the application that is being

defined to CA TPX.

Auto restart

ACTAUT

Tells CA TPX whether to automatically reconnect to the application when the user's virtual terminal session with the application ends.

Disallow VIEWing on this appl

ACTNVIEW

Specifies whether CA TPX prevents users from using any of the View facility features.

End-to-End option

ACTETEC

Tells CA TPX when it should return the SNA response to the application when the application sends data. Options are:

ALL—wait for response from the terminal on every RU.

NONE—don't wait for the response from the physical terminal.

BB—wait for response from the terminal on any RU with Begin Bracket.

DR—wait for response from the terminal on any RU carrying the request for Definite Response.

Enforce CD protocol

ACTBRKT

Specify Y to ignore data received from non-SNA terminals that violates protocol. Specify N if you don't want this data ignored.

Extended data stream

ACTEXT

Specifies whether the application has a terminal table indicating extended data stream support.

Gen Qualified Pass Ticket

ACTQTIX

Indicates that a Pass Ticket will be generated based on ACF2 or TOP SECRET qualified profiles

Generate Pass Ticket

ACTPTIX

Indicates that a pass ticket is to be generated for this application during session initiation.

Generic Resource

ACTGR

Specifies whether the application is actually a generic resource name for a pool of applications. Setting this will cause CA TPX to take the APPLID from the network name control vector rather than the plu name field of the bind.

Ignore appl output for timeout

ACTOPT8

Indicates whether application output is disregarded when updating fields used for timeout checking.

Inbound compression

ACTMDT

Indicates whether inbound compression is performed on this application. Specify Y to have CA TPX optimize inbound data.

Inform user of CD protocol error

ACTBMSG

Indicates whether CA TPX notifies a user sending protocol violating data from a non-SNA terminal that the data has been ignored. Specify Y if you've specified Y for Enforce CD protocol and want the user to know when data is ignored.

Inquire on application status

ACTINQ

Tells CA TPX whether to issue the VTAM INQUIRE APPLSTAT macro for this application.

Issues CLSDST PASS

ACTCPS

Indicates whether the application may issue a CLSDST PASS to another VTAM applid after the initial session to this application is established. Specifying Y allows CA TPX to recognize that the aspects of CLSDST PASS processing are normal and not error situations.

Keep virtual terminal

ACTSAVE

Specifies whether the virtual terminal should be maintained when the application session ends. Certain applications require the virtual terminal to be maintained and reserved for that session for security reasons

Label

ACTLABEL

The up to 32 characters of description that appears on the
CA TPX menu for this application.

Mask entry name

ACTMSK1

Specifies the name of the virtual terminal mask that controls which virtual terminal CA TPX selects for the application session. You specify these masks on the Masking Rules Table.

Masking done for security

ACTMASKX

Indicates whether masking has been established for security reasons. Specify Y to prevent session transfers if masking was specified in the application definition. Specify N to allow session transfers.

Maximum sessions

ACTUMAX

Specifies the maximum number of virtual terminal sessions that can be active in CA TPX at one time for this application.

Mode entry override

ACTMODET

Specifies the name of a particular logon mode table entry that CA TPX must use for this application. Include this value only for applications that require the use of a specific logon mode table entry name.

Model sensitive

ACTMDL

Specifies whether the application has a terminal table with specific terminal and model definitions. These applications require that the virtual terminal model types match the physical terminal model.

Outbound compression

ACTCOMP

Indicates whether outbound compression is performed on this application. If you specify Y, CA TPX will do 3270 data stream compression on all data this application sends to the terminal.

Outbound stripping

ACTSTRIP

Indicates whether outbound stripping is performed on this application. If you specify Y, CA TPX strips extended attribute bytes that are not supported by a physical terminal.

OPENGATE Control User

ACTCUSER

Specifies the user ID of the user who controls this application for OPENGATE processing.

Pass Ticket prof name

ACTLMOD

Specifies the name to be supplied to the external security system during Pass Ticket generation for TSO and VM systems.

Readbuf Technique

ACTRDBUF

Indicates whether CA TPX reads the terminal controller buffer contents when the user switches out of the application session.

Screen even if readbuf technique

ACTSCRN

Indicates that a virtual screen image is maintained even though Y was specified in the Readbuf Technique field.

Sends first screen

ACTCLEAR

Indicates whether the terminal user should wait for the application to send the first screen at session start time. Specifying Y indicates that the application is going to send the first screen.

Session Key

ACTKEY

Identifies a single PFkey that lets the user go directly to the application session.

Sessionid

ACTSESS

The name identifying the session on the CA TPX menu unless it's overridden at the profile or user level.

Signal session switch

ACTSGNL

Used to inform network management and measurement products such as Net Alert when the user switches from one virtual terminal session to another. Specify a one- to eight-character identifier that will be used as the signal.

Start ACL prior to CLSDST PASS

ACTBCPS

If you specify Y and have specified that the application issues CLSDST PASS, the ACLPGM will be allowed to communicate with the application before the PASS.

Start ACLPGM

ACTACL

The default session activation ACL program used to activate sessions to this application

Substring

ACTSTUB

Used with applications that use CLSDST PASS. Specify a substring of characters from the application's minor APPL statements if those statements do not begin with the same characters as the major APPL statement. This substring must uniquely identify the application.

Suspend background application

ACTSWOUT

Used for applications that automatically update the application screen. If you specify Y and the user switches out of the session, CA TPX will inform the application that automatic updating of the screen should be suspended until the user returns to the application session.

Termination ACLPGM

ACTTACL

Specifies the default session termination ACL program used when sessions to this application are terminated.

Timeout Minutes

ACTTOUT

The number of minutes of inactivity that can pass before CA TPX automatically terminates a session with this application.

Type (SHR,GRP,UNQ,TPX)

ACTTYPE

Describes the application's virtual terminal requirements.

USERVAR application

ACTUVAR

Indicates whether the application uses a VTAM USERVAR definition in lieu of the Extended Recovery Facility.

XRF application

ACTXRF

Specifies whether the application uses the Extended Recovery Facility.

Auto restart

ACTAUT

Tells CA TPX whether to automatically reconnect to the application when the user's virtual terminal session with the application ends.

Disallow VIEWing on this appl

ACTNVIEW

Specifies whether CA TPX prevents users from using any of the View facility features.

End-to-End option

ACTETEC

Tells CA TPX when it should return the SNA response to the application when the application sends data. Options are:

ALL—wait for response from the terminal on every RU.

NONE—don't wait for the response from the physical terminal.

BB—wait for response from the terminal on any RU with Begin Bracket.

DR—wait for response from the terminal on any RU carrying the request for Definite Response.

Enforce CD protocol

ACTBRKT

Specify Y to ignore data received from non-SNA terminals that violates protocol. Specify N if you don't want this data ignored.

Extended datastream

ACTEXT

Specifies whether the application has a terminal table indicating extended data stream support.

Gen Qualified Pass Ticket

ACTQTIX

Indicates that a Pass Ticket will be generated based on ACF2 or TOP SECRET qualified profiles

Generate Pass Ticket

ACTPTIX

Indicates that a pass ticket is to be generated for this application during session initiation.

Generic Resource

ACTGR

Specifies whether the application is actually a generic resource name for a pool of applications. Setting this will cause CA TPX to take the APPLID from the network name control vector rather than the plu name field of the bind.

Ignore appl output for timeout

ACTOPT8

Indicates whether application output is disregarded when updating fields used for timeout checking.

Inbound compression

ACTMDT

Indicates whether inbound compression is performed on this application. Specify Y to have CA TPX optimize inbound data.

Inform user of CD protocol error

ACTBMSG

Indicates whether CA TPX notifies a user sending protocol violating data from a non-SNA terminal that the data has been ignored. Specify Y if you've specified Y for Enforce CD protocol and want the user to know when data is ignored.

Inquire on application status

ACTINQ

Tells CA TPX whether to issue the VTAM INQUIRE APPLSTAT macro for this application.

Issues CLSDST PASS

ACTCPS

Indicates whether the application may issue a CLSDST PASS to another VTAM applid after the initial session to this application is established. Specifying Y allows CA TPX to recognize that the aspects of CLSDST PASS processing are normal and not error situations.

Keep virtual terminal

ACTSAVE

Specifies whether the virtual terminal should be maintained when the application session ends. Certain applications require the virtual terminal to be maintained and reserved for that session for security reasons

Label

ACTLABEL

The up to 32 characters of description that appears on the CA TPX menu for this application.

Mask entry name

ACTMSK1

Specifies the name of the virtual terminal mask that controls which virtual terminal CA TPX selects for the application session. You specify these masks on the Masking Rules Table.

Masking done for security

ACTMASKX

Indicates whether masking has been established for security reasons. Specify Y to prevent session transfers if masking was specified in the application definition. Specify N to allow session transfers.

Maximum sessions

ACTUMAX

Specifies the maximum number of virtual terminal sessions that can be active in CA TPX at one time for this application.

Mode entry override

ACTMODET

Specifies the name of a particular logon mode table entry that CA TPX must use for this application. Include this value only for applications that require the use of a specific logon mode table entry name.

Model sensitive

ACTMDL

Specifies whether the application has a terminal table with specific terminal and model definitions. These applications require that the virtual terminal model types match the physical terminal model.

Outbound compression

ACTCOMP

Indicates whether outbound compression is performed on this application. If you specify Y CA TPX will do 3270 data stream compression on all data this application sends to the terminal.

Outbound stripping

ACTSTRIP

Indicates whether outbound stripping is performed on this application. If you specify Y CA TPX strips extended attribute bytes that are not supported by a physical terminal.

OPENGATE Control User

ACTCUSER

Specifies the user ID of the user who controls this application for OPENGATE processing.

Pass Ticket prof name

ACTLMOD

Specifies the name to be supplied to the external security system during Pass Ticket generation for TSO and VM systems.

Readbuf Technique

ACTRDBUF

Indicates whether CA TPX reads the terminal controller buffer contents when the user switches out of the application session.

Screen even if readbuf technique

ACTSCRN

Indicates that a virtual screen image is maintained even though Y was specified in the Readbuf Technique field.

Sends first screen

ACTCLEAR

Indicates whether the terminal user should wait for the application to send the first screen at session start time. Specifying Y indicates that the application is going to send the first screen.

Session Key

ACTKEY

Identifies a single PFkey that lets the user go directly to the application session.

Sessionid

ACTSESS

The name identifying the session on the CA TPX menu unless it's overridden at the profile or user level.

Signal session switch

ACTSGNL

Used to inform network management and measurement products such as Net Alert when the user switches from one virtual terminal session to another. Specify a one- to eight-character identifier that will be used as the signal.

Start ACL prior to CLSDST PASS

ACTBCPS

If you specify Y and have specified that the application issues CLSDST PASS, the ACLPGM will be allowed to communicate with the application before the PASS.

Start ACLPGM

ACTACL

The default session activation ACL program used to activate sessions to this application

Substring

ACTSTUB

Used with applications that use CLSDST PASS. Specify a substring of characters from the application's minor APPL statements if those statements do not begin with the same characters as the major APPL statement. This substring must uniquely identify the application.

Suspend background application

ACTSWOUT

Used for applications that automatically update the application screen. If you specify Y and the user switches out of the session, CA TPX will inform the application that automatic updating of the screen should be suspended until the user returns to the application session.

Termination ACLPGM

ACTTACL

Specifies the default session termination ACL program used when sessions to this application are terminated.

Timeout Minutes

ACTTOUT

The number of minutes of inactivity that can pass before CA TPX automatically terminates a session with this application.

Type (SHR,GRP,UNQ,TPX)

ACTTYPE

Describes the application's virtual terminal requirements.

USERVAR application

ACTUVAR

Indicates whether the application uses a VTAM USERVAR definition in lieu of the Extended Recovery Facility.

XRF application

ACTXRF

Specifies whether the application uses the Extended Recovery Facility.