Add or Modify Terminal Options

Access the TPX Terminal Options Table List, as described in Add or Select a Terminal Options Table in this chapter.

Do one of the following:

To add an entry, type S entry-name on the command line, where entry-name is the name of the entry that you want to add or modify. Then press Enter.
To modify an existing entry, either type S entry-name as described previously, or use the Tab key to move the cursor to the entry you want, type S, and press Enter.

The first Terminal Options Detail panel is displayed, as shown in step 3.

Why Order Is Important—The product uses the entries in the order listed. Note that the software sorts the rules alphabetically first and numerically second.

For example, if you add the entries RULE02, TPXGRP, RULE07, and TPXADMIN, the software sorts them as follows:

RULE02
RULE07
TPXADMIN
TPXGRP

After you add an entry, there is no way to move it in the list.

To copy an entire Terminal Options Table from an existing table, type COPY table-name on the command line. Then press Enter. You will see message: MENA8017 table-name copied. The table details may now be modified.

TPX Terminal Options Table Entry List Panelid - TEN0141 Command ===> copy sysaprod Userid - VALGA02 Termid - A55TU068 Terminal Options Table: SYSCTEST <New> Date - 04/22/13 Time - 14:08:17 Entry Mask characters ******************************** BOTTOM OF DATA *******************************

Press Enter

TPX Terminal Options Table Entry List MENA8017 SYSAPROD copied Panelid - TEN0141 Command ===> Userid - VALGA02 Termid - A55TU068 Terminal Options Table: SYSCTEST <New> Date - 04/22/13 Time - 14:09:30 Entry Mask characters RULE01 A55TI--- RULE02 -------- ******************************** BOTTOM OF DATA *******************************

In the following panel, the administrator is adding an entry named RULE03.

TPX Terminal Options Table Entry List Panelid - TEN0141 Command ===>S RULE03 Userid - SYSADMIN Termid - TPXPUN05 Terminal Options Table: SYSAPROD Date - 03/23/03 Time - 12:37:45 Entry Mask characters RULE01 DXAL5--- RULE02 -------- ****************************** BOTTOM OF DATA *************************

Press Enter

TPX Terminal Options Detail Panel Panelid - TEN0142 Command ===> Userid - VALGA02 Termid - A55TU068 Terminal Options Table: SYSTPROD <New> Date - 04/22/13 Terminal Options Entry: RULE03 <New> Time - 14:04:59 Terminal Mask: LOGO panel member: LOGMODE entry override: Application Logmode override: User Passthrough Print Mgmt. printer: ReBind with largest screen size available: N Term. does not support 081b: N Term. does not support Read Buffer: N Term. does not support Read Modified All: N Ignore Device End sense code: N Terminal defined to VTAM with INTTAB: N Terminal does not support extended datastream: N Terminal does not support highlighting: N Terminal supports ERASE, RESET struct. field: N Terminal name is from an LU pool: N Ignore Keyboard Restore sent for a null RU: N PF1=Help PF3=End PF4=Return PF8=Next Page "CANCEL" cancel

To copy a single table entry from another entry in this table, type COPY table-name on the command line. Then press Enter. You will see message: MENA8017 table-name copied. The table details may now be modified.

TPX Terminal Options Detail Panel Panelid - TEN0142 Command ===> copy rule01 Userid - VALGA02 Termid - A55TU068 Terminal Options Table: SYSTPROD Date - 04/22/13 Terminal Options Entry: RULE03 <New> Time - 14:23:39 Terminal Mask: LOGO panel member: LOGMODE entry override: Application Logmode override: User Passthrough Print Mgmt. printer: ReBind with largest screen size available: N Term. does not support 081b: N Term. does not support Read Buffer: N Term. does not support Read Modified All: N Ignore Device End sense code: N Terminal defined to VTAM with INTTAB: N Terminal does not support extended datastream: N Terminal does not support highlighting: N Terminal supports ERASE, RESET struct. field: N Terminal name is from an LU pool: N Ignore Keyboard Restore sent for a null RU: N PF1=Help PF3=End PF4=Return PF8=Next Page "CANCEL" cancel

Press ENTER

TPX Terminal Options Detail Panel MENA8017 RULE01 copied Panelid - TEN0142 Command ===> Userid - VALGA02 Termid - A55TU068 Terminal Options Table: SYSTPROD Date - 04/22/13 Terminal Options Entry: RULE03 <New> Time - 14:24:38 Terminal Mask: DXAL5--- LOGO panel member: LOGMODE entry override: Application Logmode override: User Passthrough Print Mgmt. printer: ReBind with largest screen size available: N Term. does not support 081b: N Term. does not support Read Buffer: N Term. does not support Read Modified All: N Ignore Device End sense code: N Terminal defined to VTAM with INTTAB: N Terminal does not support extended datastream: N Terminal does not support highlighting: N Terminal supports ERASE, RESET struct. field: N Terminal name is from an LU pool: N Ignore Keyboard Restore sent for a null RU: N PF1=Help PF3=End PF4=Return PF8=Next Page "CANCEL" cancel

Modify the fields on this panel. You can use the Tab key to move the cursor from field to field.

Accessing Online Help for Field Definitions—To access help for a field on a panel, move the cursor to the field and press PF1.

TPX Terminal Options Detail Panel Panelid - TEN0142 Command ===> Userid - VALGA02 Termid - A55TU068 Terminal Options Table: SYSTPROD Date - 04/22/13 Terminal Options Entry: RULE03 <New> Time - 14:26:22 Terminal Mask: DXAL6--- LOGO panel member: LOGMODE entry override: Application Logmode override: User Passthrough Print Mgmt. printer: ReBind with largest screen size available: N Term. does not support 081b: N Term. does not support Read Buffer: N Term. does not support Read Modified All: N Ignore Device End sense code: N Terminal defined to VTAM with INTTAB: N Terminal does not support extended datastream: N Terminal does not support highlighting: N Terminal supports ERASE, RESET struct. field: N Terminal name is from an LU pool: N Ignore Keyboard Restore sent for a null RU: N PF1=Help PF3=End PF4=Return PF8=Next Page "CANCEL" cancel

Press PF8 to go to the second Terminal Options Detail panel, shown in step 5.

Modify the fields on this panel.

TPX Terminal Options Detail Panel Panelid - TEN0143 Command ===> Userid - SYSADMIN Termid - TPXPUN05 Terminal Options Table: SYSAPROD Date - 03/23/03 Terminal Options Entry: RULE01 Time - 12:38:09 Terminal Mask: DXAL5--- Override System Options: Reacquire terminal on any disconnect: N Ignore Logo Timeout: N Query terminal for capabilities: N Override Application Characteristics Definitions: Use Read Buffer Technique: N Override ACT, Outbound Compression On: N Override ACT, Outbound Compression Off: N Override ACT, Inbound Compression On: N Override ACT, Inbound Compression Off: N PF1=Help PF3=End PF4=Return PF7=Prev PF8=Next "CANCEL" cancel

Press PF8 to go to the third Terminal Options Detail panel, shown in the following.

Modify the fields on this panel.

TPX Terminal Options Detail Panel Panelid - TEN0144 Command ===> Userid - SYSADMIN Termid - TPXSYS02 Terminal Options Table: SYSAPROD Date - 12/14/03 Terminal Mask entry: RULE01 Time - 08:19:23 Terminal Mask: DXAL5--- Change Signoff to Logoff: N Disallow Input from LOGO: N Disallow LOGOFF, /K, or F3 from LOGO: N Use Terminal name as Userid (Autosign): N PF1=Help PF3=End PF4=Return PF7=Prev Page "CANCEL" cancel

Press PF3 to return to the Terminal Options Table Entry List.

TPX Terminal Options Table Entry List Panelid - TEN0141 Command ===> Userid - VALGA02 Termid - A55TU068 Terminal Options Table: SYSTPROD Date - 04/22/13 Time - 14:27:25 Entry Mask characters RULE01 DXAL5--- RULE02 -------- RULE03 DXAL6---

Note: In the above example, this new RULE03 will never be used since RULE02 will apply to everything that does not match RULE01.

To add more terminal options entries, repeat steps 2 through 8.

Press PF3 twice to save your changes and display the TPX System Administration Menu.

You can put your changes into effect by issuing the following command in an operator session:

RELOAD TRM=table-name