Reason:
The SYSPRINT data set, which is required for execution, is not allocated. This message is written by issuing a WTO macro with a route code of 11 (WTP). Processing is terminated with a condition code of 12.
Action:
Allocate the data set, then retry.
Reason:
The SYSPRINT data set could not be opened. This message is written by issuing a WTO macro with a route code of 11 (WTP). Processing is terminated with a condition code of 12.
Action:
Consult any accompanying message or the systems programmer.
Reason:
No PARM string was specified on the EXEC statement for ESFSPTP. Processing is terminated with a condition code of 12.
Action:
Consult manual for a reason of how to pass parameters to the program.
Reason:
The command passed to ESFSPTP in the PARM string was not syntactically valid. xxxxxxxxx is a substring of the parameters, starting from the point where the error was detected. Processing is terminated with a condition code of 12.
Action:
Correct the command, then rerun.
Reason:
This is the title line for the status and error reports. Each subsequent line describes one processed spool file. Processing continues.
The message-ID is replaced by one of the following indicators:
Indicates that a file was successfully backed up
Indicates that a file was successfully restored
Indicate an unsuccessful back up or restore function
The information displayed in the report columns is as follows:
The new sequence number assigned by CA Spool to a file which is being restored.
The file sequence number of the file being processed.
Owner name.
Destination name.
Form number.
FCB name
Output Class.
Copy count.
Number of print lines.
File status indicators:
First 16 characters of the programmer's name.
The time of day when the error occurred. This column is present on the SYSPRINT report only.
Error return codes from CA Spool routines. This column is present on the SYSPRINT report only. The format is xx-yyyy, where xx is the code returned by CA Spool and yyyy is the CA Spool routine. If the ESFSTAT routine returns C'06', then this column would read 06-STAT.
Action:
Investigate any CA Spool error codes returned.
Reason:
This message states the function in progress. xxxxxx is replaced by BACKUP if a back up data set is being created or by LOAD if spool files are being recreated. The time stamp from the message is written to the back up file. Processing continues.
Action:
None.
Reason:
This message is issued when either the subsystem specified by the SUBSYS=operand or the default subsystem assigned (if the SUBSYS= operand is omitted) is unavailable. Processing is terminated with a condition code of 12.
Action:
Select an active CA Spool subsystem or consult the systems programmer.
Reason:
No DD statement was found for the INDEX data set. The index report describing successfully processed data sets will be suppressed. Processing continues.
Action:
None.
Reason:
The file name replacing the xxxxxxxx was allocated but could not be opened for processing. Processing is terminated with a condition code of 12.
Action:
See accompanying message or consult the system programming group.
Reason:
An unexpected return code was received from the ESFSTAT routine. Processing is terminated with a condition code of 12.
Action:
Consult your systems programmer.
Reason:
An allocation was missing. The back up data set must be named BACKUP for the backup function and LOAD for the restore function. Processing is terminated with a condition code of 12.
Action:
Allocate the data set, then retry.
Reason:
A GETMAIN request for working storage failed. Processing is terminated with a condition code of 12.
Action:
Specify a larger REGION operand on the EXEC statement for ESFSPTP or consult your systems programmer.
Reason:
The keyword values from one or more parameters contained invalid characters. This message is issued in response to a PE status code from ESFSTAT with a search argument of the keyword values specified. Processing is terminated with a condition code of 12.
Action:
Determine the invalid parameters and correct them, then rerun.
Reason:
The data set to be used by the LOAD function does not conform to the format required by the program.
Processing is terminated with a condition code of 4 or 12
Action:
If the condition code is 12, the data set is not a valid back up data set and cannot be input to ESFSPTP. A condition code of 4 indicates an internal error, and your systems programmer must be notified.
Reason:
ESFSPTP has completed the requested function. xxxxx is replaced by LOADED or DUMPED to indicate the completed function. 99999 is the number of files successfully processed.
Processing is terminated. A condition code other than zero is explained in any proceeding message(s).
Action:
None.
Reason:
Message contains a copy of the execution parameters from the EXEC. Processing continues.
Action:
None.
Reason:
Informative message to identify the back up data set. Processing continues.
Action:
None.
Reason:
You have coded the DUP=NO parameter. The data set xxxxxx already exists in the spool, and the back up copy will therefore not be restored. Processing continues.
Action:
None.
Reason:
Open of CA Spool internal compression failed with RC=nn. Processing terminates.
Action:
Contact your systems programmer or CA Technical Support.
Reason:
Compress call to CA Spool internal compression failed with RC=nn. Processing terminates.
Action:
Contact your systems programmer or CA Technical Support.
Reason:
Expansion call to CA Spool internal compression failed with RC=nn. Processing terminates.
Action:
Contact your systems programmer or CA Technical Support.
Reason:
Internal STACK overflowed. Processing terminates.
Action:
Contact your systems programmer or CA Technical Support.
Reason:
Error searching for SNAPDUMP in the JCL. Processing terminates.
Action:
Insert a SNAPDUMP DD card in the JCL and rerun.
Reason:
Open of SNAPDUMP failed. Processing terminates.
Action:
Check SYSOUT for reasons, correct the errors and rerun.
Reason:
INDEXXT DD statement is missing from the ESFSPTP JCL. Processing terminates.
Action:
If extended index processing is needed, add the INDEXXT DD statement to the JCL. For more information, see the Backup-Restore Utility (ESFSPTP) chapter of the Operations, Commands and Messages Guide.
None.
Reason:
The data encryption/decryption module failed for service cccccccc with ICSF return code 99 and ICSF reason code 88 and Entry request code 77.
The following Entry codes 77 may be observed:
8 - Get current key label.
20 - Encrypt data.
24 - Decrypt data.
For documentation of the ICSF return and reason codes, see the Appendix in the z/OS ICSF Application Programmer Guide.
Action:
Correct the reported ICSF configuration problem.
Reason:
The data encryption/decryption module failed for service cccccccc with ICSF return code 99 and ICSF reason code 88 and Entry request code 77.
The following Entry codes 77 may be observed:
8 - Get current key label.
20 - Encrypt data.
24 - Decrypt data.
For documentation of the ICSF return and reason codes, see Appendix A in the z/OS ICSF Application Programmer Guide.
Action:
Start ICSF.
Reason:
The data encryption/decryption module failed because ICSF is not installed for service cccccccc and Entry request code 77.
The following Entry codes 77 may be observed:
8 - Get current key label.
20 - Encrypt data.
24 - Decrypt data.
Action:
Install ICSF or disable encryption/decryption by specifying SPOOLENC=NO.
Reason:
The ICSF encryption key for key label 9999999 for Entry request code 77 was not found.
The following Entry codes 77 may be observed:
8 - Get current key label.
20 - Encrypt data.
24 - Decrypt data.
Action:
Check if the current ICSF CKDS dataset has been destroyed.
Reason:
The data encryption/decryption module failed because service code 99 is not defined.
Action:
Report the problem to CA Support.
Reason:
The current userid is not allowed to take an unencrypted backup of an encrypted CA Spool system.
Action:
Execution terminated.
Reason:
An unencrypted backup of an encrypted CA Spool system is created.
Action:
None.
Reason:
The current userid is not allowed to restore an encrypted backup to an unencrypted CA Spool system.
Action:
Execution terminated.
Reason:
Restore of an encrypted ESFPTP backup to an unencrypted CA Spool system.
Action:
None.
Reason:
The data encryption/decryption module failed because the ESFSPTP program was not executed from an APF-authorized library.
Action:
Report the problem to your system programmer so that they can give you access to ESFSPTP in an APF-authorized library.
Execution terminated.
Reason:
The data decryption failed because the encryption key label used to encrypt the data was not found in ICSF.
Action:
Report the problem to your system programmer to check if the current ICSF CKDS data set has been destroyed or if the ESFSPTP backup was created on an LPAR which does not share the same ICSF CKDS data sets.
Execution terminated.
|
Copyright © 2011 CA.
All rights reserved.
|
|