Messages › Command Responses

Command Responses

ESF800

OK

Reason:

Confirmation; command has been successfully queued for execution. Processing continues.

Action:

None.

ESF801

SHUTDOWN COMMAND ACCEPTED

Reason:

A SHUTDOWN command has been successfully processed, and the system-termination sequence is in progress. Processing continues until the network interface and all opened files have been closed, at which time CA Spool terminates.

Action:

None.

ESF802

NETWORK COMMAND REJECTED, NO NETWORK DEFINED

Reason:

A start-net, stop-net, or reset-net command has been entered but is rejected because no network nodes have been defined to CA Spool. The command is discarded, and processing continues.

Action:

None.

ESF803

NETWORK COMMAND REJECTED, INTERFACE BUSY

Reason:

A start-net, stop-net, or reset-net command has been rejected because the network interface is busy processing another start, stop, or reset command. The command is discarded, and processing continues.

Action:

Enter the command again later.

ESF804

START COMMAND REJECTED, INTERFACE ALREADY ACTIVE

Reason:

A start-net command has been rejected because the network interface is already started. The command is discarded, and processing continues.

Action:

None.

ESF805

STOP COMMAND REJECTED, INTERFACE ALREADY INACTIVE

Reason:

A stop-net command has been rejected because the network interface is already stopped. The command is discarded, and processing continues.

Action:

None.

ESF806

NETWORK HALT ALREADY IN PROCESS

Reason:

A stop-net command has been rejected because the network interface already is in the process of being stopped. The command is discarded, and processing continues.

Action:

None.

ESF807

RESET COMMAND REJECTED, INTERFACE ALREADY INACTIVE

Reason:

A reset-net command has been rejected because the network interface is already stopped. The command is discarded, and processing continues.

Action:

None.

ESF808

CHECKPOINT REQUEST COMPLETED

Reason:

An explicit checkpoint request (CHKPT command) has been successfully completed. Processing continues.

Action:

None.

ESF809

VERSION.LEVEL CA Spool x.x (yyyy)

Reason:

This message is displayed in response to a display (DS) command. x.x specifies the current CA Spool release number and yyyy the current CA Spool service level. Processing continues.

Action:

None.

ESF810

UNDEFINED FILE DESTINATION

Reason:

A command has been entered which specified a file destination which was neither defined in CA Spool or JES2/JES3. The command is discarded, and processing continues.

Action:

Re-enter the command with a valid node name.

ESF811

INVALID NODE NAME

Reason:

A network command has been entered which specifies an invalid node name. The command is discarded, and processing continues.

Action:

Re-enter the command with a valid node name.

ESF812

INVALID FILE SEQUENCE NUMBER

Reason:

A file-control command has been entered which contains an invalid file sequence number or an invalid file sequence range. Processing continues.

Action:

Re-enter the command with a valid file sequence number or file sequence range.

ESF813

FILE NOT FOUND

Reason:

A file-control command has been entered which specifies a non-existing file. Processing continues.

Action:

Re-enter the command with a valid file sequence number.

ESF814

FILE NOT TEMPORARILY CLOSED

Reason:

A close file command has been entered which specifies a file which was not in the temporarily closed state. Processing continues.

Action:

Re-enter the command with a valid file sequence number.

ESF815

FILE PERMANENTLY CLOSED

Reason:

A close-file command has been successfully completed, and the requested file is now permanently closed. Processing continues.

Action:

None.

ESF816

xxxxx OUTSTANDING I/O-REQUESTS

Reason:

This message is displayed in response to a display-status (DS) command. xxxxx specifies the current number of incomplete DASD I/O requests in the system. Processing continues.

Action:

None.

ESF817

OPEN FILE COUNT: aaaaa/bbbbb OUTPUT, ccccc/ddddd INPUT

Reason:

This message is displayed in response to a display-status (DS) command. Processing continues.

• aaaaa specifies the total number of files currently opened for output processing
• bbbbb specifies the current number of files opened for output processing by this system.
• ccccc specifies the total number of files currently opened for input processing.
• ddddd specifies the current number of files opened for input processing by this system.

Action:

None.

ESF818

xx % SPOOL UTILIZATION / HWM UTILIZATION yy%

Reason:

This message is displayed in response to a display-status (DS) command. xxx specifies the current percentage of spool space in use. yyy specifies the highest percentage of spool space in use since last cold start. Processing continues.

Action:

None.

ESF819

** SYSTEM IN SHUTDOWN SEQUENCE ***

Reason:

This message is displayed in response to a display-status request if the system is in the process of being terminated. Processing continues.

Action:

None.

ESF820

xxxxxx FILE QUEUE ELEMENTS IN USE – MAX yyyyyy/HWM zzzzzz

Reason:

This message is displayed in response to a display-status (DS) command. xxxxxx specifies the number of files currently in the system, yyyyyy specifies the maximum number of concurrent files allowed and zzzzzz specifies the maximum number of files since the last cold start. Processing continues.

Action:

None.

ESF821

xxxxx ACTIVE NETWORK SESSIONS

Reason:

This message is displayed in response to a display-status (DS) command. xxxxx specifies the current number of active network sessions. Processing continues.

Action:

None.

ESF822

VTAM ACB CLOSED

Reason:

This message is displayed in response to a display-status (DS) command when the network interface is stopped. Processing continues.

Action:

None.

ESF823

VTAM ACB OPEN - LOGONS ENABLED

Reason:

This message is displayed in response to a display-status (DS) command when the network interface is started, and logon requests can be processed. Processing continues.

Action:

None.

ESF824

VTAM ACB OPEN - xxxx HALT IN PROCESS

Reason:

This message is displayed in response to a display-status (DS) command when the network interface is in the process of being stopped. No logon requests can be processed. xxxx is SLOW if a stop-net command or a VTAM Z NET command has been entered. xxxx is FAST if a reset-net or a VTAM Z NET,QUICK command has been entered or if the VTAM system is abending. Processing continues.

Action:

None.

ESF825

MSG FROM xxxxxxxx: - - - text - - -

Reason:

A message has been received from the network session xxxxxxxx. Processing continues.

Action:

None.

ESF826

WRITELOG REJECTED, LOGGING NOT ACTIVE

Reason:

A WRITELOG command has been rejected because the log-writer task is not active. Processing continues.

Action:

If logging is required, then restart the CA Spool system with the LOG option.

ESF827

This message number represents one of the following messages:

SAR INTERFACE IS <ACTIVE / HALTED>, xxxxxxxxxxxxxxxxx, 999999 FILES
SAR INTERFACE IS NOT ACTIVE

Reason:

This message is displayed in response to a display (DS) command. xxxxxxxxxxxxxxxxx specifies the name of the SAR database and 999999 specifies the number of files currently being processed by the CA View interface. Processing continues.

Action:

None.

ESF828

FILE xxxxxx NAME=oooooooo DEST=dddddddd ss sssss

Reason:

This message is displayed in response to a display-active (DA) command. File xxxxxx (with owner name oooooooo and destination name dddddddd) was found to be active in a CA Spool system where:

ss sssss specifies the processing status of the file and is one of the following:

• IN PURGE—If the file is awaiting purge processing
• ON—nnnnnnnn where nnnnnnnn is printer node name if the file is active on a network printer in this system's network domain
• ON NETWORK—If the file is active on a network printer in another CA Spool system's network domain
• IN TRANSFER—If the file is being transferred to the JES2/JES3 system
• OPEN INPUT—If the file is opened for input processing
• OPEN OUTPUT—If the file is opened for output processing
• ????????—If the file has an undefined status (this usually means that there is an error in the system)

Processing continues.

Action:

None.

ESF829

NO ACTIVE FILES

Reason:

This message is displayed in response to a display-active (DA) command if no files were active in the system. Processing continues.

Action:

None.

ESF830

DISPLAY(tttttttt) NODENAME xxxxxxxx < "DRAINED" / "DRAINING" / "ACTIVE">

ssssssss> G=ggggg AUTF=a RELREQ= r

Reason:

This message is displayed in response to a display-node command where:

tttttttt

Specifies the device type of the display node

xxxxxxxx

Specifies the node name

ssssssss

Specifies the status of the network session

ggggg

Specifies the number of the network group to which this node belongs

a

Specifies a bit setting such as F8. This bit setting is mapped in DSECT $IQSECPM which resides in the AESFSRC library. The flag byte is SECAUTF and is found at offset x'30' into $IQSECPM. Note that a value of AUTF=F8 is a user without security restrictions; any other value means that this user is restricted in some way by internal or external security.

r

Specifies whether a release request must be accepted for this node (N if no, D if delayed, or I if immediate).

Processing continues.

Action:

None.

ESF831

This message number represents one of the following messages:

PRINTER(tttttttt) NODENAME xxxxxxxx ssssssss G=ggggg
F=ffff C=cccc Q=qqqqqqqq A=a P=p S=s R=r T=rrrrrrrr I=iiii
ALIAS: XXXXXXXX <TOTAL=nnnnn> N=yyyyyyyy F8=ffffffff
LINES: TOTAL: vvvvvvv, PRINTED: wwwwwww
PAGES: TOTAL: vvvvvvv, PRINTED: wwwwwww

Reason:

These messages are displayed in response to a display printer node command where:

tttttttt

Specifies the device type

xxxxxxxx

Specifies the node name

ssssssss

Specifies the device status (DRAINED, ACTIVE (FILE xxxxxx), INT REQ, DRAINING,.HALTING, INACTIVE, QUEUED, HALTED, or HALTED (SETUP))

ggggg

Specifies the number of the network group to which the printer node belongs

ffff

Specifies the first four characters of the current form number

ffffffff

Specifies the complete current form number

cccc

Specifies the current FCB being simulated

qqqqqqqq

Specifies the output class currently being processed by the printer (Y if automatic file selection mode is on or N if automatic file-selection mode is off)

p

Specifies Y if the printer operates in automatic purge mode or N if not

s

Specifies the number of separator pages being produced between files (0, 1, or 2)

r

Specifies Y if the printer operates in restricted file-selection mode or N if not

rrrrrrrr

Specifies the name of the translate table in use on this printer if any

iiii

Specifies the sense code received from the last SIMLOGON request, if any

TOTAL=nnnnn

Specifies the total number of replies for the command causing this message, provided the command has been issued from the MENU system

vvvvvv

Specifies the number of output lines/pages multiplied by the number of copies for the current file

wwwwwwww

Specifies the total number of output lines/pages printed of the current file

Processing continues.

Action:

None.

ESF832

This message number represents one of the following messages:

FILE-TRANSFER SUBTASK IS <ACTIVE/ABENDED/HALTED/DRAINING>
ESF-TO-JES INTERFACE IS <ACTIVE/ABENDED/HALTED/DRAINING>
<SAPI/PSO> JES-TO-ESF INTERFACE IS <ACTIVE /ABENDED /HALTED / DRAINING> <(THREADS)
THREAD COUNTS - CURRENT nnnnnn MAX nnnnnn

Reason:

The status of the file-transfer subtask and the two interfaces ESFTOJES and JESTOESF are defined. If XFERSAPI=THREADS is specified, the current and maximum thread counts are given. Processing continues.

Action:

None.

ESF833

HALT COMMAND REJECTED, SUBTASK HAS ABENDED

Reason:

A halt file-transfer-interface command has been rejected because the file-transfer subtask has abended. Processing continues.

Action:

If the file-transfer interface is required, then restart CA Spool. Save the dump output.

ESF834

HALT COMMAND REJECTED, INTERFACE ALREADY HALTED

Reason:

A halt file-transfer-interface command has been rejected because the interface is already halted. Processing continues.

Action:

None.

ESF835

FILE TRANSFER INTERFACE HALTED

Reason:

A halt file-transfer-subtask command has been successfully completed.

Both the ESFTOJES the JESTOESF interface are halted.

Action:

None.

ESF835

xxxxxxxx INTERFACE HALTED

Reason:

A halt-file-interface xxxxxxxx command has been successfully completed. The xxxxxxxx can be either ESFTOJES or JESTOESF. Processing continues.

Action:

None.

ESF836

START COMMAND REJECTED, SUBTASK HAS BEEN ABENDED

Reason:

A start-file-transfer-interface command has been rejected because the file-transfer subtask has abended. Processing continues.

Action:

If the file-transfer interface is required, then restart CA Spool. Save the dump output.

ESF837

START COMMAND REJECTED, INTERFACE ALREADY ACTIVE

Reason:

A start-file-transfer interface command has been rejected because the interface is already active. Processing continues.

Action:

None.

ESF838

FILE-TRANSFER INTERFACE STARTED

Reason:

A start-file-transfer subtask command has been successfully completed.

Both ESF-TO-JES interface and JES-TO-ESF interface are started, and processing continues.

Action:

None.

ESF838

<ESF->JES / JES->ESF> INTERFACE STARTED

Reason:

A start-file-transfer interface command has been successfully completed. Processing continues.

Action:

None.

ESF839

This message number represents one of the following messages:

SEQNO FILENAME DEST Q FORM FCB LINES CPY PR SID STAT (nnnnnn)
xxxxxx oooooooo dddddddd q ffffffff cccc lllllll cop pr sid ssss
END-OF-DISPLAY

Reason:

This message is displayed in response to a display-file command.

nnnnnn

Specifies the total number of file satisfying the display command. This field only appears when the TOTAL operand has been specified on the display command where:

xxxxxx

Specifies file sequence number

oooooooo

Specifies file-owner name

Dddddddd

Specifies file-destination name

Q

Specifies output class

ffffffff

Specifies form number

cccc

Specifies FCB name

llllllll

Specifies the number of output lines

cop

Specifies the number of copies

Pr

Specifies the files output priority

Sid

Specifies the system ID of the system on which the file is active or to which it has affinity

ssss

Specifies the files status; the file status is one or more of the following characters:

• E—End-of-file has been detected; i.e., the file has been printed.
• O—The file is currently opened for output processing.
• I—The file is currently opened for input processing.
• T—The file is temporarily closed.
• B—The file is opened for backwards input processing.
• P—The file is queued for purge processing.
• H—The file is held.
• A—The file is active on a network node.
• W—The file is waiting for processing.
• X—The file is being processed.
• S—The file is queued for the SAR interface.
• Y—The file is queued for Transformation.

Processing continues.

Action:

None.

ESF840

QUEUE EMPTY

Reason:

Message indicates no files were found. Processing continues.

Action:

None.

ESF841

xxxxxx FILE(S) SCHEDULED FOR PURGE

Reason:

xxxxxx specifies the number of files scheduled for purge processing. Processing continues.

Action:

None.

ESF842

GDDM ACB <OPEN / CLOSED>

Reason:

Response to a display-status (DS) command. ACB status is xxxxxx. Processing continues.

Action:

None.

ESF843

xxxxxxxxxxxxxxxx

Reason:

File queue elements are displayed in hexadecimal format. Processing continues.

Action:

None.

ESF844

COMMAND NOT AUTHORIZED FOR FILE

Reason:

User ID does not have sufficient authorization for the file. Processing continues.

Action:

None.

ESF845

COMMAND NOT AUTHORIZED FOR NODE

Reason:

User ID does not have sufficient authorization for the node. Processing continues.

Action:

None.

ESF846

RESET REJECTED, FILE IS BEING PURGED

Reason:

Command rejected because file was queued for purge processing. Processing continues.

Action:

None.

ESF847

RESET REJECTED, FILE NOT PERMANENTLY CLOSED

Reason:

Command rejected because file is in the temporarily closed state. Processing continues.

Action:

Issue a close-file command followed by the reset command.

ESF848

RESET REJECTED, FILE TRANSFER IN PROCESS

Reason:

Command rejected because file is being transferred to the JES system. Processing continues.

Action:

None.

ESF849

RESET REJECTED, FILE ACTIVE ON NETWORK

Reason:

Command rejected; file being processed by network-print processor. Processing continues.

Action:

None.

ESF850

xxxxxx FILE(S) ROUTED

Reason:

xxxxxx specifies the number of files routed. Processing continues.

Action:

None.

ESF850

xxxxxx FILE(S) REQUEUED

Reason:

xxxxxx specifies the number of files requeued. Processing continues.

Action:

None.

ESF851

xxxxxxx

Reason:

Internal response to a display printer command from the menu system. Processing continues.

Action:

None.

ESF852

xxxxxx FILE(S) RELEASED

Reason:

xxxxxx specifies the number of files released. Processing continues.

Action:

None.

ESF853

TCP/IP printer subtasks: xxx

Reason:

This message is displayed in response to a display-status (DS) command. xxx specifies the current number of TCP/IP printer subtasks active. Processing continues.

Action:

None.

ESF854

Current Hour Max Hour Grand Total

ESF854 Files printed: 0 2 2

ESF854 Pages printed: 0 2 2

ESF854 Lines printed: 0 19 19

Reason:

This message is displayed in response to a display-status (DS) command. Files, pages and lines for current hour, maximum hour and grand total since last restart are displayed.

Action:

None.

ESF855

xxxxxx FILE(S) HELD

Reason:

xxxxxx specifies the number of files held. Processing continues.

Action:

None.

ESF857

Printers Defined(xxxxxx) Remaining(yyyy)

Reason:

This message is displayed in response to a display-status (DS) command. xxxxxx specifies the current number of printers defined. yyyy specifies how many more printers may be defined. Processing continues.

Action:

None.

ESF858

<PRINTER / NJE station> xxxxxxxx NOT AVAILABLE

Reason:

A start command / NJE node xxxxxxxx has been rejected because the network node is inactive. Processing continues.

Action:

Activate the printer node through a VTAM V NET,ACT command, and enter the start-printer command again.

ESF858

SIMLOGON ERROR ON xxxxxxxx,rc,f2,sysi,ussi

Reason:

A simlogon error has been detected on network node xxxxxxxx. rc is the VTAM return code, f2 is the VTAM feedback code 2, sysi is the VTAM system-sense information, and ussi is the VTAM user-sense information.

The printer node enters Edrained status. Processing continues.

Action:

Correct any communication problems and start the printer node.

ESF859

START COMMAND REJECTED, NETWORK IN SHUTDOWN

Reason:

A start-printer command or a start NJE command has been rejected because the network interface is in the process of being terminated. Processing continues.

Action:

None.

ESF860

<PRINTER / NJE STATION>xxxxxxxx ALREADY WAITING FOR CONNECTION

Reason:

Start command for printer / NJE node xxxxxxxx rejected; previous start command queued to VTAM which will not start node processing before release. Processing continues.

Action:

None.

ESF861

START COMMAND REJECTED, NETWORK INTERFACE NOT STARTED

Reason:

Network interface is stopped. Processing continues.

Action:

Start the interface, then re-enter the start printer command.

ESF862

START xxxxxxxx FAILED, SYSTEM OPERATOR NOTIFIED

Reason:

Start printer command for printer xxxxxxxx rejected by VTAM. Processing continues.

Action:

Contact your systems programmer.

ESF863

USER(S) NOT LOGGED ON OR NOT RECEIVING

Reason:

A message command was entered, but no user received the message. Processing continues.

Action:

None.

ESF864

CID xxxxxxxx</G> ssssssss < BY jjjjjjjj >

Reason:

Processing continues.

• xxxxxxxx is the communication identifier; /G is present if the CID is defined by generic name
• ssssssss is communication channel status, and BY jjjjjjjj if channel opened or stopping
• jjjjjjjj names JOB or STC which opened the channel.

Action:

None.

ESF865

xxxxx ACTIVE COMMUNICATION CHANNELS

Reason:

xxxxx specifies the current number of active communication channels. Processing continues.

Action:

None.

ESF866

PRINTER xxxxxxxx BUSY ON GDDM INTERFACE

Reason:

Command rejected; file being printed by the GDDM interface. Processing continues.

Action:

None.

ESF867

START xxxxxxxx REJECTED, NETWORK IN SHUTDOWN

Reason:

Rejected because the network interface is being terminated. Processing continues.

Action:

None.

ESF868

NETWORK COMMAND REJECTED, SYSTEM ssss NETWORK NOT ACTIVE

Reason:

The SNET, PNET or TNET command was rejected because the network for the specified new Network Owner ssss was not active. Processing continues.

Action:

None.

ESF869

FSS-DEF./CONN. 999/ 888 FSA-DEF./ACT. 7777/ 6666

Reason:

This message displays in response to a display status (DS) command.

• 999 is the number of FSS (FSSDEF) defined.
• 888 is the number of FSS connected.
• 7777 is the number of FSS-attached printers defined.
• 6666 is the number of FSS-attached printers active.

Action:

None.

ESF870

Service Desk Interface is <active / not active / suspended / abended>

Reason:

This message is displayed in response to a display (DS) command. Processing continues.

Action:

None.

ESF871

aaaa bbbbbbbbbbbbbbbbbbb,NJE=cccccccc ddddddddddddddddddd

Reason:

Displayed in response to LSYS command where:

• aaaa is the system ID
• bbbbbbbbbbbbbbbbbbb is the current status of the system:
• NOT STARTED—Displays if the system has never been started.
• INACTIVE—Displays if the system is currently inactive.
• DORMANT—Displays if the active system has been dormant for a longer period than specified by the value of the SYNCTOL.
• RE-STARTING ON zzzz—Displays if the system is being restarted on system zzzz.
• cccccccc is the node name of the NJE connection associated to this system.
• ddddddddddddddddddd contains IS CONTROLLING NETWORK.

Action:

None.

ESF872

ESYS ALREADY IN PROCESS

Reason:

Reset system command rejected; previous ESYS not completed. Processing continues.

Action:

Wait for the previous command to complete and then re-enter.

ESF873

xxxx sssssss

Reason:

Reset system command rejected because the affected system is active.

• (sssssss = IS ACTIVE AND CANNOT BE RE-STARTED) The system is running and is fully operational.
• (sssssss = same as 1) SYNCTOL interval not elapsed since the system failed.
• (sssssss = RE-STARTING ON zzzz) System zzzz restarting. Processing continues.

Action:

None.

ESF875

This message number represents one of the following messages:

CANCEL COMMAND REJECTED, INTERFACE NOT <ACTIVE / INSTALLED>
or
SAR INTERFACE CANCELLED

Reason:

Displayed in response to cancel ESF to SAR interface (CSAR). The ESF to SAR interface is halted.

Action:

None.

ESF876

This message number represents one of the following messages:

HALT COMMAND REJECTED, INTERFACE
<ALREADY HALTED | NOT ACTIVE | NOT INSTALLED>
or
SAR INTERFACE HALTED

Reason:

Displayed in response to a halt ESF to SAR interface (HSAR). The ESF to SAR interface is halted.

Action:

None.

ESF877

This message number represents one of the following messages:

START COMMAND REJECTED, INTERFACE <ALREADY ACTIVE |
NOT INITIALIZED | NOT INSTALLED>
or
SAR INTERFACE STARTED

Reason:

Displayed in response to a start ESF to SAR interface (SSAR). See the actual message text.

Action:

None.

ESF878

Transformer Interface is <not active | active, 999999 files>

Reason:

This message is displayed in response to a display (DS) command and shows the current status of the Transformer interface. If Transformer interface is active 999999 specifies the number of files currently being processed by the Transformer interface. Processing continues.

Action:

None.

ESF879

This message number represents one of the following messages:

Halt Command rejected, Interface <already halted |
not active | not installed >
or
Transformer Interface halted

Reason:

This message is displayed in response to a HT - halt Transformer interface command. The Transformer interface is halted.

Action:

None.

ESF880

This message number represents one of the following messages:

Start Command rejected, Interface <already active |
Not initialized | not installed >
or
Transformer Interface started

Reason:

This message is displayed in response to a ST - start Transformer interface command. See the actual message text.

Action:

None.

ESF881

REINIT SUCCESSFULLY COMPLETED

Reason:

A REINIT (reinitialize) command has been successfully completed. All changes to the parameter deck are updated in CA Spool. Processing continues.

Action:

None.

ESF882

REINIT SUCCESSFUL, BUT SOME NODES COULD NOT BE REDEFINED

Reason:

REINIT (reinitialize) command successfully completed. Some changes could not be updated due to nodes in session with CA Spool. Processing continues.

Action:

Re-issue the REINIT command.

ESF883

REINIT COMPLETED, BUT SOME ERRORS OCCURRED DURING PROCESSING

Reason:

REINIT (reinitialize) command has been completed. One or more of the changed node definitions were not successfully updated. Processing continues.

Action:

Contact your systems programmer.

ESF884

REINIT FAILED

Reason:

REINIT failed because syntax errors found in the parameter deck. Processing continues.

Action:

Contact your systems programmer.

ESF885

A(ESFSSSM )=X'99999999' A(ESFUSS )=X'88888888'

Reason:

This message is displayed in response to a display (DS) command and shows the currently used names and addresses of the ESFSSSM and ESFUSS load modules. Processing continues.

Action:

None.

ESF886

LPD Interface is <undefined | terminated | abended | halted | active>

Reason:

This message is displayed in response to a display (DS) command and shows the current status of the LPD interface. Processing continues.

Action:

None.

ESF887

No LPD Interface defined

Reason:

This message is displayed in response to an LPD command, if the LPD interface has not been defined. Processing continues.

Action:

None.

ESF888

There are four versions of this message with variable text.

REINIT MODULES PROCESSED - REFRESH PENDING

Reason:

A request to queue a refresh of ECSA module ESFSSSM, ESFUSS, and ESFUSO has been successfully processed and the refresh will occur at the next CA Spool startup.

Action:

None.

REINIT MODULES BYPASSED - REFRESH ALREADY PENDING

Reason:

A request to queue a refresh of ECSA modules ESFSSSM, ESFUSS, and ESFUSO has been rejected because a refresh request is already pending.

Action:

None.

REINIT MODULES OFF PROCESSED - PENDING REFRESH CANCELLED

Reason:

A request to cancel a pending request to refresh ECSA modules ESFSSSM, ESFUSO, and ESFUSS has been successfully processed and the pending request has been canceled.

Action:

None.

REINIT MODULES OFF BYPASSED - NO PENDING REFRESH

Reason:

A request to cancel a pending request to refresh ECSA modules ESFSSSM, ESFUSO, and ESFUSS has been rejected because there is no pending request to refresh the modules.

Action:

None.

ESF891

FILE BUSY ON ANOTHER SYSTEM

Reason:

A file control command has been rejected because the affected file is active on another system in the multi-access-spool configuration. Processing continues.

Action:

None.

ESF892

PRINTER IN USE

Reason:

Reset-printer command rejected because a file is active on the printer. Processing continues.

Action:

Interrupt the printer, then re-enter the reset command.

ESF893

PRINTER NOT ACTIVE

Reason:

A printer-control command has been rejected because the specified printer node is not connected to the system. Processing continues.

Action:

Start the printer (using the start command), then re-enter command.

ESF894

OPERAND TOO LONG

Reason:

An operand on a command was too long.

The command string is discarded, and processing continues.

Action:

Re-enter the correct command.

ESF895

INVALID OPERAND(S)

Reason:

A command has been entered with one or more invalid operands. The command is discarded, and processing continues.

Action:

Re-enter the command with valid operands.

ESF896

MISSING OPERAND(S)

Reason:

One or more required operands missing from command. The command is discarded. Processing continues.

Action:

Enter the correct command.

ESF897

INVALID COMMAND

Reason:

A command has been entered which CA Spool does not recognize as a valid CA Spool command. The command is discarded. Processing continues.

Action:

Enter the correct command.

ESF898

COMMAND STRING TOO LONG, COMMAND DISCARDED

Reason:

String was too long to be contained in an internal command buffer. The command string entered is discarded, and processing continues.

Action:

Enter the commands in smaller pieces.

ESF899

UNABLE TO OBTAIN COMMAND BUFFER, COMMAND DISCARDED

Reason:

The command processor was unable to allocate an internal command buffer to contain the specified command string. The command string is discarded, and processing continues.

Action:

Enter the command again later.