Reference Guide › Command Line Scripting › CA Cisco UCS Commands › dpmucs powercycle Command--Power Cycle Blades

dpmucs powercycle Command--Power Cycle Blades

Use this command to perform power cycle operations on a blade.

This command has the following format:

dpmucs powercycle 
[-sc sc_url] 
-ucs_manager ucsmanagername 
[-dn distinguishedname]
-operation operation 
[-ws_user username]
[-ws_password password]
[-locale iso639value]

-sc sc_url

(Optional) Defines the URL for the service controller host.

Example: https://hostname:port/...

hostname

Defines the fully qualified host where the service controller is installed.

Example: localhost.ca.com

port

Defines the listening port for the service controller server.

Example: 80

-ucs_manager ucsmanagername

Defines the name of the UCS Manager for retrieving information or an operation.

-dn distinguishedname

Defines the full-qualified, unique name of a Cisco UCS chassis, blade, or switch. Valid entry: Device name, or an empty string ("") to denote all chassis, blades, or switches. If not specified, device details are listed.

-operation operations

Defines the blade power cycle options. Valid entries are:

• 2 = Power Cycle. Immediately powers down the blade, then powers up the blade.
• 3 = Graceful Shut Down. Allows data to be saved, then powers down the blade, and powers up the blade.
• 4 = Reset Immediately. Allows you to unplug the power supply to the blade, and then plug it back without saving data.
• 5 = Reset Wait. Allows data to be saved before you unplug the power supply, and plug it back in.
• 6 = Soft Shut Down. Notifies all running applications of a shutdown so data is saved.
• 7 = Shut Down. Shuts down the blade without saving data.
• 8 = Boot Up. Boots the blade.

-ws_user username -ws_password password

(Optional) Specifies the credentials to use for the web service security check. If you do not include credentials, you are prompted to enter them. Avoid the prompt for credentials by setting up your own session using caaipsecurity.

-locale iso639value

(Optional) Specifies an IS0 639_3166 combination to override the default English output, for example, fr_FR for French. To use the locale of the command prompt, specify "native".

Example: Power Cycle a Blade

This example immediately power cycles the blade, sys/chassis-1/blade-3.

dpmucs powercycle 
-ucs_manager EngManager200 
-dn "sys/chassis-1/blade-3" 
-operation 2 
-ws_user cba 
-ws_password cba