Set the GSVIINST macro parameters before you submit the job INSTALL. The following example shows the default parameter values that appear in the job INSTALL.
These parameters have the following syntax:
//INSTALL JOB (000000000),'SYSVIEW',CLASS=A
//*
//*-------------------------------------------------------------------------------*
//* CA SYSVIEW *
//* Installation generator *
//* *
//* This job will dynamically build the other jobs that are *
//* required to complete the installation. *
//* *
//* *--------------------* Important Notice *-------------------* *
//* *
//* CA Mainframe Software Manager *
//* *
//* If you have used CA Mainframe Software Manager *
//* to perform the installation of the product, *
//* this step is required. *
//* *
//* Step: Required *
//* *
//*-------------------------------------------------------------------------------*
//ASM EXEC PGM=ASMA90,REGION=1024K,PARM='NOTERM,LIST,DECK,NOOBJECT'
//*
//SYSUT1 DD UNIT=SYSDA,SPACE=(1700,(600,100))
//SYSUT2 DD UNIT=SYSDA,SPACE=(1700,(600,100))
//SYSUT3 DD UNIT=SYSDA,SPACE=(1700,(600,100))
//SYSPUNCH DD SYSOUT=(*,INTRDR),DCB=(RECFM=FB,LRECL=80,BLKSIZE=2000)
//SYSPRINT DD SYSOUT=*
//*----------------------------------------------------------------------------------------*
//* The data set defined to the DDNAME SYSLIB should also *
//* be coded as the data set name on the GSVIINST option *
//* INSTLIB=. *
//* *
//* The options that require modification or inspection *
//* for specific site installation needs are marked with *
//* a "<---". *
//*----------------------------------------------------------------------------------------*
//*
//SYSLIB DD DISP=SHR,DSN=sysview.SAMPJCL <---INSTLIB
//*
//*
//* Note: When modifying the macro below, remember to include
//* the continuation character "X" in column 72 for all
//* lines except the last line containing the DUMMY=
//* parameter.
//*
//*.+....1....+....2....+....3....+....4....+....5....+....6....+....7.X
//SYSIN DD *
*
PRINT NOGEN
GSVIINST X
, *------------------------------------------------------------* X
, * Installation data set name * X
, * This is the data set name that you are * X
, * editing now. * X
, *-----------------------------------------------------------* X
INSTLIB=sysview.SAMPJCL, <--- X
, *-----------------------------------------------------------* X
, * System parmlib data set * X
, *-----------------------------------------------------------* X
SYSPLIB=SYS1.PARMLIB, <--- X
, *-----------------------------------------------------------* X
, * Source installation Media * X
, * ESD - ESD file on DASD * X
, * DVD - Contains PAX file * X
, *-----------------------------------------------------------* X
SOURCE=ESD, ESD | DVD <--- X
, *-----------------------------------------------------------* X
, * High-level qualifier used when the ESD file * X
, * was UNZIPPED. * X
, *------------------------------------------------------------* X
ESDHLQ=yourHLQ, ESD HLQ <--- X
, *------------------------------------------------------------* X
, * Data set allocation * X
, *------------------------------------------------------------* X
PREFIX=sysview, <--- X
SITEDSN=YES, <--- X
DELETE=YES, X
DASDVOL=volume, <--- X
SMS=NO, X
SMSVOL=, X
STORCLAS=, X
DSKUNIT=SYSDA, X
WRKUNIT=SYSDA, X
PROFTYPE=PDS, X
, *-------------------------------------------------------------* X
, * Data set blocksizes * X
, *-------------------------------------------------------------* X
BLKSZU=6144, X
BLKSZFB=3200, X
BLKSZVB=25600, X
, *-------------------------------------------------------------* X
, * z/FS data set allocation * X
, *-------------------------------------------------------------* X
ZFSHLQ=OMVS.SYSVIEW, <--- X
PATHPREFIX=, X
, *--------------------------------------------------------------* X
, * SMP/E * X
, *--------------------------------------------------------------* X
SMPEHLQ=, X
SMPETZ=CAIT, X
SMPEDZ=CAID, X
SMPEVOL=volume, <--- X
DLIBVOL=volume, <--- X
SMPEUNIT=SYSDA, X
DLIBUNIT=SYSDA, X
, *--------------------------------------------------------------* X
, * Data set and high level qualifiers * X
, *--------------------------------------------------------------* X
AUTHLIB=apf.auth.dataset.name, <--- X
CEEHLQ=CEE, <--- X
IMSHLQ=ims, <--- X
MQSHLQ=mqseries, <--- X
SYSTCPD=TCPIP.TCPIP.DATA, <--- X
TCPMBR=, X
, *---------------------------------------------------------------* X
, * CA SYSVIEW Options * X
, *---------------------------------------------------------------* X
OPTIONS=(, Begin option list X
NOCAPTURE, ...option X
NOCICS, ...option X
NODATACOM, ...option X
NOIMS, ...option X
NOMVS, ...option X
NOMQSERIES, ...option X
NOTCPIP, ...option X
NOCEAPM, ...option X
), End option list X
, *--------------------------------------------------------------* X
, * CA SYSVIEW Components * X
, *--------------------------------------------------------------* X
COMPONENTS=(, Begin component list X
DB2 ...component X
HCHECK, ...component X
MIM, ...component X
ROSCOE, ...component X
USS, ...component X
XSYSTEM, ...component X
), End component list X
, *-------------------------------------------------------------* X
, * CA SYSVIEW GEN parameters * X
, *--------------------------------------------------------------* X
SVC=238, <--- X
SUBSYS=GSVX, X
, *-------------------------------------------------------------* X
, * The CA customer siteid. * X
, * The siteid will be used to assist technical * X
, * support with diagnostics. This is used when * X
, * FTPing information to CA. (optional) * X
, *--------------------------------------------------------------* X
SITEID=siteid, <--- X
, *--------------------------------------------------------------* X
, * Jobcard/JCL creation * X
, *--------------------------------------------------------------* X
JOBNAME=, X
NAME='PROGRAMMER NAME', <--- X
ACCT=(000000000), X
NOTIFY=NO, X
CLASS=A, X
MSGCLASS=A, X
MSGLEVEL=(1,1), X
ROUTE=NO, X
SYSAFF=NO, X
OUTC=*, X
, *--------------------------------------------------------------* X
, * Assemble and Link edit * X
, *--------------------------------------------------------------* X
ASMPGM=ASMA90, X
LINKPGM=IEWL, X
, *-------------------------------------------------------------* X
, * End of Macro * X
, *-------------------------------------------------------------* X
DUMMY=DUMMY
*
* Do not remove the following line.
*
END
/*
You can modify the following GSVIINST parameters:
Names the current installation library data set. Be sure that you use the same high-level qualifier you used in the SYSLIB statement. See the step Modify and Run the Job INSTALL.
Default: sysview.SAMPJCL
Specifies the system parameter library that contains the system configuration options member.
Default: SYS1.PARMLIB
Specifies the source installation media type.
Valid Values:
This parameter is only used and required if SOURCE=ESD.
Specifies the high-level qualifier that is used when unzipping the ESD files to z/OS data sets. UNZIPJCL performs this job.
The UNZIPJCL job references the high-level qualifier as yourHLQ. Use the same value for the ESDHLQ= value.
Specifies the prefix for allocating data sets.
Limit: The length of PREFIX and SUFFIX must not exceed 20 characters.
Default: PREFIX=sysview
Specifies whether to use a set of site libraries for maintaining your customized library members.
The site data sets can be reused and carried forward when you migrate or update to a new release of CA SYSVIEW.
Valid Values:
Generates the sample job INST0006. This job creates a set of site libraries and updates the sample GSVX* System configuration member accordingly.
The sample job INST0006 is not generated.
Default: SITEDSN=YES
Specifies the parameter for indicating whether to generate a DELETE request for each new library before allocation. Specify YES or NO. If you are reinstalling to an existing set of libraries, specify DELETE=NO.
Default: DELETE=YES
Specifies the volume serial number (volser) of the volume on which to allocate data sets.
Specifies the parameter for defining whether SMS is used for the data set allocation. Specify YES or NO. If you specify YES, specify an SMS storage class on the STORCLAS parameter.
Default: SMS=NO
Specifies the volume serial number (volser) of the volume that is used to allocate the SMS data sets.
Note: Some sites do not allow the volser to be specified for SMS.
Specifies the SMS storage class that is used when you have specified YES on the SMS parameter.
Specifies the disk unit type.
Default: DSKUNIT=SYSDA
Specifies the disk work unit type.
Default: WRKUNIT=SYSDA
Specifies the profile data set type that you want to allocate.
Valid Values:
Allocates the PDS profile data set, which is shared across multiple sysplexes.
Allocates the profile PDSE data set, which can only be shared within a single sysplex. If your configuration contains more than one sysplex, for each sysplex allocate a unique data set.
Default: PDS
Specifies the block size that is used when allocating data sets with an undefined record length. Use this parameter for allocating the load library data sets.
Default: BLKSZU=6144
Specifies the block size that is used when allocating fixed block data sets.
Default: BLKSZFB=3200
Specifies the block size that is used when allocating variable block data sets.
Default: BLKSZVB=25600
Specifies the high-level qualifier for the z/FS data set created during the installation process:
Contains the CA SYSVIEW SMP/E fmid.
Default: ZFSHLQ=OMVS.SYSVIEW
Specifies the pathname prefix for the mount point of the z/FS data sets.
Default: PATHPREFIX=,
Example:
PATHPREFIX=/instpath
Resolves to the following mount points:
instpath/usr/lpp/sysview instpath/usr/lpp/sysview/fmid
Contains the CA SYSVIEW SMP/E fmid.
Specifies the HLQ for the SMP/E libraries. Specifying a value for SMP/E HLQ generates an extra sample job (INST0004). This job creates a set of run-time libraries using the PREFIX specified HLQ.
Specifies the SMP/E target zone.
Default: SMPETZ=CAIT
Specifies the SMP/E distribution zone.
Default: SMPEDZ=CAID
Specifies the volume where you allocated the internal SMP/E and target data sets.
Specifies the volume where you allocate the SMP/E distribution data sets.
Specifies the unit type for the SMPEVOL specified volume.
Specifies the unit type for the DLIBVOL specified volume.
Specifies the data set name of an existing APF-authorized library that is used to copy the dynamic installation program. This dynamic installation program:
Specifies the C language environment high-level qualifier at your site.
Specifies the IMS high-level qualifier for your site. If multiple releases of IMS are being used, specify the highest level. This high-level qualifier is used to generate the DD statements for the following data sets:
DD DSN=imshlq.SDFSRESL
Specifies WebSphere MQ high-level qualifier for your site. If multiple releases of WebSphere MQ are being used, specify the highest level. This high-level qualifier is used to generate the DD statements for the following data sets:
DD DSN=mqshlq.SCSQAUTH DD DSN=mqshlq.SCSQLOAD DD DSN=mqshlq.SCSQANLE
Specifies the name of the system TCP/IP configuration file. This parameter can also be coded as a Hierarchical File System (HFS) path.
Default: TCPIP.TCPIP.DATA
Specifies the member name from the TCP/IP data set (if any).
Note: This parameter is required only if the data set specified on the SYSTCPD parameter is a PDS.
Default: None
Specifies to enable those options that are licensed to the customer. The options include the base product. Specifying an option value lets you use the option commands. By default, you can access commands for the option from the CA SYSVIEW main menu.
Note: Specify at least one option.
Values for the options parameter include:
Specifies the CA SYSVIEW components that you want enabled. Specifying a component value lets you use the component commands. By default, you can access commands for the component from the CA SYSVIEW main menu.
Note: DB2 is a new component and requires a license LMP key for CA Insight for DB2.
Values for the components parameter include:
Note: Complete the CA SYSVIEW installation before installing or customizing some of these components and options.
Specifies the supervisor call (SVC) number for CA SYSVIEW. A type-3 user SVC is required.
The SVC module GSVXSVC is downward compatible. However, if you plan on sharing the SVC with prior releases of CA SYSVIEW, apply all conditioning maintenance.
Default: 238
Specifies the suffix for the System Configuration Options member name in the system parameter library. Use GSVX if it is not already in use by another product. The same subsystem can share multiple releases of CA SYSVIEW.
Default: SUBSYS=GSVX
Specifies the CA customer site ID used when contacting technical support. Use this site ID to FTP information to CA.
Specifies the job name that is used when creating a JOB statement for installation jobs. If no parameter is specified, the name of the installation member is used.
Specifies the programmer name that is specified on the JOB statement.
Specifies the account number when it is necessary to build a JOB statement.
Default: ACCT=(00000000)
Specifies the user ID that is notified when the job completes. If NO is specified, this parameter is not generated on the JOB statement.
Default: NOTIFY=NO
Specifies the job class for use on the JOB statement.
Default: CLASS=A
Specifies the message class for use on the JOB statement.
Default: MSGCLASS=A
Specifies the message level for use on the JOB statement.
Default: MSGLEVEL=(1,1)
Generates the following route statement:
/*ROUTE PRINT userid
If NO is specified, this statement is not generated.
Default: ROUTE=NO
Generates the following system affinity statement:
/*JOBPARM SYSAFF=sysname
If NO is specified, this statement is not generated.
Default: SYSAFF=NO
Specifies the output class for use with SYSOUT.
Default: OUTC=*
Specifies the name of the program that is used to assemble modules. Possible values are IEV90 and ASMA90.
Default: ASMPGM=ASMA90
Specifies the name of the program that is used to link-edit modules.
Default: LINKPGM=IEWL
|
Copyright © 2013 CA.
All rights reserved.
|
|