|
|
|
Reason:
The &SECCALL statement was used to check user authorization for the requested operation. This request was unsuccessful.
System Action:
The request is rejected.
User Action:
Determine the cause of the failure in the security system and retry.
Reason:
You attempted to access Panel Maintenance, but you are not authorized.
System Action:
The request is rejected.
User Action:
Request authorization for panel maintenance from your installation and retry the request.
Reason:
The path name entered on the Edit Services Primary Menu is not defined to the system.
System Action:
The requested selection list is not displayed.
User Action:
The path name is derived from your user definition. Contact you security system administrator.
Reason:
The specified library name is not defined to the system.
System Action:
The requested selection list is not displayed.
User Action:
Enter a valid library name.
Reason:
The library name entered is not part of your panel services path.
System Action:
The request is rejected.
User Action:
Enter a correct library name. Enter ? next to the Library Name field to display a list of valid library names.
Reason:
You attempted to update the contents of a panel library ( P1 ), but the library is not authorized for editing.
System Action:
The request is rejected.
User Action:
Correct the library name and retry. Panel library specifications are controlled by the PANELLIBS Customizer parameter group.
Reason:
You entered an invalid panel name.
System Action:
None.
User Action:
Correct the panel name and retry.
Reason:
You specified a path name that you are not authorized to access.
System Action:
The request is rejected.
User Action:
Enter your authorized path name and retry.
Reason:
The panel being added already exists in the library.
System Action:
The request is rejected.
User Action:
Use a different panel name.
Reason:
The &SECCALL statement was used to check user authorization for the requested operation. This request was unsuccessful.
System Action:
The request is rejected.
User Action:
Determine the cause of the failure in the security system and retry.
Reason:
You attempted to access Edit Services facilities, but you are not authorized.
System Action:
The request is rejected.
User Action:
Contact your security administrator.
Reason:
The path name entered on the Edit Services Primary Menu is not defined to the system.
System Action:
The requested selection list is not displayed.
User Action:
Enter a correct path name and retry.
Reason:
An option must be entered in the Select Option field, or a function key pressed in order to perform the desired action.
System Action:
None.
User Action:
Enter a valid selection on the menu.
Reason:
An invalid selection was entered in the Select Option field.
System Action:
None.
User Action:
Enter a valid selection on the panel.
Reason:
A field which is required for the option selected was omitted.
System Action:
The cursor is placed in the field which must be entered and the field is highlighted.
User Action:
Enter a value for the required field.
Reason:
The library name entered on the Edit Services selection menu is not part of your panel services path.
System Action:
The request is rejected.
User Action:
Enter a correct library name. A selection list of valid library names is presented if a ? is entered next to the library field on the Edit Services Panel Move/Copy Menu.
Reason:
You attempted to update the contents of a panel library, but the library may not be edited.
System Action:
The request is rejected.
User Action:
The EDITablity of a library is controlled by the LIBRARY and LIBPATH commands. Correct the library name, or alter its attributes to allow EDIT.
Reason:
An invalid name was entered where a panel name was required.
System Action:
None.
User Action:
Correct the panel name and retry.
Reason:
A path name was supplied which you are not authorized to access.
System Action:
The request is rejected.
User Action:
Enter your authorized path name, and retry.
Reason:
You attempted to access Edit Services facilities, but they are not available on this system. Panel move and copy is therefore not available.
System Action:
The request is rejected.
User Action:
Edit Services is restricted by the SYSPARMS EDITMAXK=NONE command. Either make Edit Services available by resetting this operand, or work on another system.
Reason:
The field containing the cursor must be either YES or NO.
System Action:
The cursor is placed in the field in error and the field is highlighted.
User Action:
Correct the field value and retry.
Reason:
Panels may be moved or copied from one library to another, but not into the same library.
System Action:
The cursor is placed in the field in error and the field is highlighted.
User Action:
Correct the library names and retry.
Reason:
Panels may be moved and copied from one library to another, but not to the same library. There is only one library in the path, therefore the Panel Move/Copy utility is disabled for this path.
System Action:
The request is rejected.
User Action:
None.
Reason:
You have pressed F1 while in the Icon Panel selection list. To select an icon panel from the list, tab to the required panel and enter S beside it. The list is cursor-sensitive, so tabbing to the required panel and pressing Enter also selects that panel.
System Action:
None.
User Action:
None.
Reason:
An attempt to open the ICOPANL library to present a selection list of panels has failed with return code P.
System Action:
The list does not appear.
User Action:
Correct the file error and retry.
Reason:
A Panel Library List was presented and a library was not selected.
System Action:
None.
User Action:
None.
Reason:
The path name entered on the Edit Services Primary Menu is not defined to the system.
System Action:
The requested selection list is not displayed.
User Action:
Enter a correct path name and retry.
Reason:
The library name entered on the Edit Services Panel Move/Copy Menu is not defined to the system.
System Action:
The requested selection list is not displayed.
User Action:
Enter a correct library name. A selection list of valid library names is presented if a ? is entered next to the library field on the Edit Services Panel Move/Copy Menu.
Reason:
The library name entered on the Edit Services Move/Copy Menu cannot be opened. The return code from the FILE ID statement is shown.
System Action:
The request is rejected.
User Action:
Check that the library is open and accessible using the SH LIB and SH UDB commands.
Reason:
The SORT command on the Edit Services Panel Copy List has been issued. The command supports two sort fields but more than two were entered.
System Action:
None.
User Action:
Enter a valid SORT command and retry.
Reason:
The SORT command on the Edit Services Panel Copy List has been issued. An unsupported sort field was entered.
System Action:
None.
User Action:
Enter a valid SORT command. The valid sort fields are NAME, CREATED, MODIFIED, SIZE, MLEV and ID, corresponding to the column headings on the selection list.
Reason:
The SORT command on the Edit Services Panel Copy List has been issued and the displayed number of records was sorted.
System Action:
None.
User Action:
None.
Reason:
The &SECCALL statement was used to check user authorization for the requested operation. This request was unsuccessful.
System Action:
The request is rejected.
User Action:
Determine the cause of the failure in the security system and retry.
Reason:
You attempted to access Edit Services facilities but you are not authorized.
System Action:
The request is rejected.
User Action:
Request authorization for Edit Services from your installation and retry the request.
Reason:
You attempted to access Edit Services facilities but they are not available on this system. Panel Move/Copy is therefore not available.
System Action:
The request is rejected.
User Action:
Edit Services is restricted by the SYSPARMS EDITMAXK=NONE command. Either make Edit Services available by resetting this operand, or work on another system.
Reason:
The library name entered on the Panel Services Primary Menu is not part of your panel services path.
System Action:
The request is rejected.
User Action:
Enter a valid library name. A selection list of valid library names is presented if a '?' is entered next to the library field on the Panel Services Primary Menu.
Reason:
You attempted to update the contents of a panel library but the library may not be edited.
System Action:
The request is rejected.
User Action:
The EDITablity of a library is controlled by the LIBRARY and LIBPATH commands. Correct the library name, or alter its attributes to allow EDIT.
Reason:
An incorrect path name was supplied to the selection list. You are not authorized to access that path.
System Action:
The request is rejected.
User Action:
Enter the your authorized path name and retry.
Reason:
The panel you wish to edit or delete is being edited or deleted by you (in another window) or another user. The userid is shown.
System Action:
The request is rejected.
User Action:
Wait until the panel is no longer in use, then retry the action.
Reason:
The panel library could not be opened. The return code from the FILE ID statement is shown.
System Action:
The request is rejected.
User Action:
Check that the library is open and accessible using the SHOW LIB and SHOW UDB commands, then retry.
Reason:
The library name entered on the Edit Services Primary Menu is not defined to the system.
System Action:
The requested selection list is not displayed.
User Action:
Enter a correct library name. A selection list of valid library names is presented if a '?' is entered next to the library field on the Edit Services Primary Menu.
Reason:
The library name entered on the Edit Services Primary Menu does not contain the specified panel.
System Action:
The request is rejected.
User Action:
Correct the library or panel name and retry.
Reason:
The library name entered on the Edit Services Primary Menu cannot be opened. The return code from the FILE ID statement is shown.
System Action:
The requested selection list is not displayed.
User Action:
Check that the library is open and accessible using the SHOW LIB and SHOW UDB commands.
Reason:
The panel being copied (with replace set to NO) already exists in the target library.
System Action:
The request is rejected.
User Action:
Correct the panel name or libraries, or use the REPLACE option to over-write the existing panel in the target library.
Reason:
Some panels were moved or copied to the 'TO' library before an error on the destination library occurred. The VSAMFDBK code explaining the error is shown.
System Action:
The move or copy operation is terminated.
User Action:
Check the reason for the error, correct and retry.
Reason:
The panel has been moved or copied successfully.
System Action:
None.
User Action:
None.
Reason:
The number of panels displayed was moved or copied to the 'TO' library.
System Action:
None.
User Action:
None.
Reason:
The number of panels displayed was moved or copied to the 'TO' library. Some panel were not moved or copied, because the replace option was set to 'NO'.
System Action:
The panels which could be moved or copied without replacing an existing panel were moved or copied.
User Action:
If existing panels in the target library are to be replaced, then reissue the command with the replace option set to 'YES'.
Reason:
The print command was used to print a panel definition. The print has been accepted by the print spooler (PSM).
System Action:
None.
User Action:
None.
Reason:
Error occurred during panel rename or copy within library. The VSAMFDBK code explaining the error is shown.
System Action:
The rename or copy operation is terminated.
User Action:
Check the reason for the error, correct and retry.
Reason:
No data was found to be browsed.
System Action:
None.
User Action:
None.
Reason:
A block line command has been partially specified. That is, either the start line or end line has been specified but not both.
System Action:
The block command remains pending.
User Action:
Specify the start line and end line for the block command.
Reason:
A move or copy line command has been specified, but the position the lines are to be moved or copied to has not been specified.
System Action:
The move/copy command remains pending.
User Action:
Use the 'A' line command to indicate that the blocked data is to be moved or copied after that line, or use the 'B' line command to indicate that the blocked data is to be moved or copied before that line.
Reason:
The mandatory keyword parameter identified by P1 was not specified when the editor was invoked.
System Action:
Processing is terminated.
User Action:
Correct and retry.
Reason:
The parameter identified by P1 was specified with an invalid value identified by P2 .
System Action:
Processing is terminated.
User Action:
Correct and retry.
Reason:
The user has cancelled the edit. No data has been modified.
System Action:
None.
User Action:
None.
Reason:
An invalid command has been entered.
System Action:
The command is rejected.
User Action:
Correct and retry.
Reason:
The flow command cannot be entered when line commands are pending.
System Action:
The command is rejected.
User Action:
Complete or remove the line commands and retry.
Reason:
The margins are currently set to the displayed values.
System Action:
None.
User Action:
None.
Reason:
The margins have been set to the indicated column positions.
System Action:
None.
User Action:
None.
Reason:
An invalid left margin value has been specified.
System Action:
The command is rejected.
User Action:
Correct and retry.
Reason:
An invalid right margin value has been specified.
System Action:
The command is rejected.
User Action:
Correct and retry.
Reason:
An invalid right or left margin value has been specified.
System Action:
The command is rejected.
User Action:
Correct and retry.
Reason:
The recovery function is not supported by the application.
System Action:
The command is rejected.
User Action:
None.
Reason:
A character string was not specified on the find command.
System Action:
The command is rejected.
User Action:
Enter the character string to be found with the find command and retry.
Reason:
A character string was not specified for the change command.
System Action:
The command is rejected.
User Action:
Reenter the change command, specifying the character string to be changed and the new value of the character string.
Reason:
The copy function is not supported in this application.
System Action:
The command is rejected.
User Action:
None.
Reason:
A move or copy command has been entered but the position that the lines are to be copied or moved to has not been specified.
System Action:
The move or copy command remains pending.
User Action:
Specify where the lines are to be copied or moved by entering an 'A' or 'B' line command.
Reason:
A number of mutually exclusive commands have been entered.
System Action:
The commands are not processed.
User Action:
Correct and retry.
Reason:
A copy function has completed successfully.
System Action:
None.
User Action:
None.
Reason:
The create command is not supported in this application.
System Action:
The command is rejected.
User Action:
None.
Reason:
A create function has completed successfully.
System Action:
None.
User Action:
None.
Reason:
A command has been entered that is invalid in the mode indicated.
System Action:
The command is rejected.
User Action:
None.
Reason:
The service NCL procedure was not found in the NCL procedure library.
System Action:
The function is terminated.
User Action:
Correct the service procedure name and retry.
Reason:
An invalid scroll amount has been specified. Valid scroll amounts are (P)AGE, (H)ALF, (C)SR, (D)ATA, (M)AX or a number.
System Action:
None.
User Action:
Correct and retry.
Reason:
An invalid command parameter has been specified.
System Action:
The command is rejected.
User Action:
Correct and retry.
Reason:
A change command has successfully completed.
System Action:
None.
User Action:
None.
Reason:
A line containing the character string to be changed would be longer than the maximum line length if the change was applied.
System Action:
The change is not applied.
User Action:
None.
Reason:
The character string specified on a find command has been found. If P2 is present it indicates that ALL was specified on the FIND command and the string was found the number of times indicated.
System Action:
The cursor is positioned at the beginning of the character string.
User Action:
None.
Reason:
The end of the data, either in a forward (bottom) or backward (top), was reached before finding the specified character string.
System Action:
None.
User Action:
Press the Find key to continue the search from the top/bottom of the data.
Reason:
The specified character string was not found in the data.
System Action:
None.
User Action:
None.
Reason:
A line command was entered that is not valid on the line indicated.
System Action:
The command is rejected.
User Action:
Correct and retry.
Reason:
An invalid line command was specified.
System Action:
The command is rejected.
User Action:
Correct and retry.
Reason:
An invalid scroll amount was specified.
System Action:
None.
User Action:
Correct the scroll amount.
Reason:
The indicated field must be specified.
System Action:
None.
User Action:
Enter a valid value in the field.
Reason:
An invalid value was entered in the field indicated.
System Action:
None.
User Action:
Enter a valid value in the field.
Reason:
An attempt was made to set margins where the value of the right margin was less than the value of the left margin. The right margin value must be greater than the left margin and allow a minimum of 20 characters to be entered between the margins.
System Action:
The request is rejected.
User Action:
Change the values of the margins so that the value of the right margin is greater than the left margin and allows a minimum of 20 characters to be entered between them.
Reason:
User has attempted to issue a CREATE command without any text being present
System Action:
Request is rejected. CREATE fails.
User Action:
Enter text and retry.
Reason:
This message overlays a line of data if the line contains DBCS characters and the terminal is not DBCS capable.
System Action:
The line of data may be deleted, moved, copied but may not be editted.
User Action:
None.
Reason:
An edit screen can only be displayed in a fullscreen 3270 environment.
System Action:
The command is not processed.
User Action:
None.
Reason:
A number of mutually exclusive commands have been entered.
System Action:
The commands are not processed.
User Action:
Correct and retry.
Reason:
The editor has a physical restriction of 9999 text lines. The current set of commands will cause this limit to be exceeded.
System Action:
Restore the editor environment to the state prior to attempting to process this set of commands, and highlight all commands as being in error.
User Action:
Modify the line commands to a combination which will not cause the line limit to be exceeded. If the functions being performed are being done to facilitate further editing which will eventually lead to fewer than 9999 lines, it is possible to 'export' a subset of lines to the NOTEPAD where they may be freely edited and then 'imported' back to the editor.
Reason:
A change command was issued where either the "from" string or the "to"string were not completely specified. This error usually occurs when quotes are being used to delimit the string(s).
System Action:
Highlight the command in error.
User Action:
Re-enter the change strings taking care to ensure that quotes are balanced.
Reason:
A change command was issued where the "change to" string was not specified.
System Action:
Highlight the command in error.
User Action:
Enter the "change to" string and retry.
Reason:
The P1 action is not allowed because no text lines were specified.
System Action:
Highlight the command in error.
User Action:
Specify one or more text lines and retry the command.
Reason:
This message is issued when a MOVE and OVERLAY command resulted in not all the text being moved. This could be caused by non-blank characters being positioned in the target line(s) in the same positions as non-blank characters in the source lines. It will also occur if more source lines are specified than target lines e.g. entering M6 on one line and O3 on another.
System Action:
Issue warning message, and don't delete source lines.
User Action:
Delete the source lines using D or DD, or specify a larger target area.
Reason:
This message is issued when the application-supplied maximum text line limit (P1) has been exceeded. It is a warning message only, and normal processing will continue. However, you will not be permitted to exit from the editor, other than by cancelling, until the total number of lines is below the limit.
System Action:
Issue warning message, only allow exit via CANCEL.
User Action:
Reduce the number of text lines or CANCEL the edit session.
Reason:
This message is issued when the physical maximum text line limit of 9999 has been exceeded as a result of Text Entry. The number of excess lines lost is contained in P1.
System Action:
Delete excess lines.
User Action:
None.
Reason:
This message is issued when the RECOVERY command is issued with no operands. It indicates the current state of RECOVERY processing.
System Action:
None
User Action:
None
Reason:
This is an informational message indicating that a print request has successfully been sent to the requested printer.
System Action:
None
User Action:
None
Reason:
The value P2 that has been assigned to parameter P1 is invalid when parameter P3 has a value of P4.
System Action:
The procedure is terminated and an error message is returned.
User Action:
Correct the invalid parameter and retry the operation.
Reason:
A find command has been specified which the CAS Editor has been unable to satisfactorily parse. This message is issued when it is unclear what the string to be searched for is. An example of a FIND command which could cause this message to issue is "F FIRST LAST" in this case it is unclear whether the first occurrence of the word 'last' is being searched for, or the last occurrence of the word 'first'. Another example would be "F 'dog' cat" as it is again unclear what the actual text to be searched for is.
System Action:
The command is rejected and highlighted in error.
User Action:
Use single (') or double (") quotes to make the command unambiguous.
Reason:
A line command has been entered on a line containing DBCS data. The command is not supported on this line.
System Action:
The command is rejected and highlighted in error.
User Action:
Correct and retry.
Reason:
You have selected the 'HEX ATTR' option with the cursor positioned on a special character, for example, a DBCS shift character. This character is not eligible for display or alteration.
System Action:
None.
User Action:
Position the cursor elsewhere and retry.
Reason:
You have selected the 'HEX ATTR' edit option, but the cursor is not positioned in the body of the text.
System Action:
None.
User Action:
Position the cursor in the body of the text and retry.
Reason:
Panel ( P1 ) was saved in library ( P2 ).
System Action:
None.
User Action:
None.
Reason:
The requested panel name ( P1 ) was not found in the specified library ( P2 ).
System Action:
The procedure is terminated.
User Action:
Correct the panel name or library name and retry.
Reason:
Panel P1 exceeds the maximum length for a panel record. The maximum length for a panel record is P3 .
System Action:
Request rejected.
User Action:
Reduce the size of the panel.
Reason:
Panel ( P1 ) was deleted from library ( P2 ).
System Action:
None.
User Action:
None.
Reason:
Panel ( P1 ) was renamed (to P2 ) in library ( P3 ).
System Action:
None.
User Action:
None.
Reason:
Panel ( P1 ) was copied (as P2 ) in library ( P3 ).
System Action:
None.
User Action:
None.
Reason:
Panel ( P1 ) was copied or moved ( P2 ) to library ( P3 ).
System Action:
None.
User Action:
None.
Reason:
A request to copy or move panels from one library to another was sucessful. In the message:
P1 is the number of panels copied or moved
P2 is the action performed (copied or moved)
P3 is the target library
P4 indicates the number of panels not replaced This message is suppressed if all panels are copied or moved because:
- The replace action is specified, or
- None of the selected panels exist in the target library.
System Action:
None.
User Action:
None.
Reason:
The file from which you attempted to read a panel from is unavailable.
System Action:
Procedure terminated.
User Action:
See the NCL Reference for return codes from the &FILE OPEN verb.
Reason:
An error occurred attempting to read a panel from a library. In the message:
P1 is the name of the panel
P2 is the library name (file ID)
P3 is the file return code (&FILERC)
P4 is the file feedback code (&VSAMFDBK)
System Action:
The procedure is terminated.
User Action:
See the &FILE GET verb description in the NCL Reference for return code and feedback values.
Reason:
An error occurred attempting to write a panel to a library. In the message:
P1 is the name of the panel
P2 is the library name (file ID)
P3 is the file return code (&FILERC)
P4 is the file feedback code (&VSAMFDBK)
System Action:
The procedure is terminated.
User Action:
See the &FILE PUT verb description in the NCL Reference for return code and feedback values.
Reason:
An error occurred attempting to delete a panel from a library. In the message:
P1 is the name of the panel
P2 is the library name (file ID)
P3 is the file return code (&FILERC)
P4 is the file feedback code (&VSAMFDBK)
System Action:
The procedure is terminated.
User Action:
See the &FILE DEL verb description in the NCL Reference for return code and feedback values.
Reason:
You attempted to copy or move a panel ( P1 ) to another library ( P2 ) but the panel already exists in that library.
System Action:
Request rejected.
User Action:
If you want to replace the panel, use the replace action.
Reason:
The panel identified by P1 performed the action by P2 successfully.
System Action:
None.
User Action:
None.
Reason:
The panel identified by P1 was not saved because no changes were detected.
System Action:
None.
User Action:
None.
Reason:
You attempted to create a new panel; however, the name specified already exists in that library.
System Action:
Request rejected.
User Action:
Specifiy a unique panel name and retry.
Reason:
The library identified by P1 is not defined.
System Action:
Request rejected.
User Action:
None.
Reason:
The path name entered on the Edit Services Primary Menu is not defined to the system.
System Action:
The requested selection list is not displayed.
User Action:
The path name is derived from your user definition. Contact your security system administrator.
Reason:
You attempted to update the contents of a panel library ( P1 ), but the library is not authorized for editing.
System Action:
The request is rejected.
User Action:
Correct the library name and retry. Panel library specifications are controlled by the PANELLIBS Customizer parameter group.
Reason:
You issued a command that requires a panel name to be specified; however, you omitted the panel name.
System Action:
Request rejected.
User Action:
Specifiy a panel name and retry.
Reason:
You entered an invalid panel name in the command.
System Action:
Request rejected.
User Action:
Specifiy a valid panel name and retry.
Reason:
You issued a command with invalid syntax.
System Action:
Request rejected.
User Action:
See the online help. Correct syntax and retry.
Reason:
The panel being renamed or copied already exists in the library.
System Action:
The request is rejected.
User Action:
Use a different new panel name or delete the existing panel name before doing rename or copy in the library.
Reason:
You specified an invalid sort field name as part of the SORT command.
System Action:
None.
User Action:
Enter a valid SORT command. The valid sort fields are NAME, CREated MODified, SIZE, MLEV, and ID, corresponding to the column headings on the selection list.
Reason:
The SORT command on the Edit Services Panel Selection List has been issued, and the displayed number of records was sorted.
System Action:
None.
User Action:
None.
| Copyright © 2012 CA. All rights reserved. |
|