Appendix A: MESSAGES › A.2 HSM Component Messages
A.2 HSM Component Messages
This appendix lists all messages generated by the HSM
component of the CA MICS Space Analyzer. Some messages are
generated during the processing of the control statements,
while others are caused by various conditions in the data
found during the processing. The messages are listed in
ascending numerical sequence and include the full text of the
message, the type, the reason for the message, appropriate
user action, and applicable references to documentation.
The following type codes are used to categorize the messages:
Information designates a note that documents a CA MICS
option or potentially important feature in
the data.
Warning designates a condition in either the date or
the control statements that does not affect
the CA MICS Space Analyzer's operation, but
that may lead to unexpected results.
Error designates that a problem has been
encountered with a control statement that
will prevent a successful run of the
product. Execution is stopped after all
control statements are processed.
The message text often includes references to information
that is contained in a control statement or values of
permanent or temporary variables created during CA MICS
processing. In the description below, the message text
contains a word beginning with a percent sign (%), which
indicates that a value will be substituted into the text at
execution time. For example, message HSM00016 reads as
follows:
TEXT: >>>>> SYSID NOT 1 TO 4 CHARACTERS IN LENGTH.
SYSID=%TOKEN2.
A possible version of the printed message in the MICSLOG
might be:
TEXT: >>>>> SYSID NOT 1 TO 4 CHARACTERS IN LENGTH.
SYSID=SYS008.
+-----------------+
| H S M 0 0 0 0 1 |
+-----------------+
TEXT: HSM PARAMETER GENERATION STARTED.
TYPE: Information
REASON: This message indicates the start of the HSMPGEN
process.
ACTION: None
REFERENCES: None
+-----------------+
| H S M 0 0 0 0 2 |
+-----------------+
TEXT: HSM PARAMETER GENERATION COMPLETED SUCCESSFULLY.
TYPE: Information
REASON: This message indicates the completion of the
HSMPGEN process.
ACTION: None
REFERENCES: None
+-----------------+
| H S M 0 0 0 1 0 |
+-----------------+
TEXT: ---- HSMOPS MEMBER:
TYPE: Information
REASON: This message precedes the printing of the contents
of the HSMOPS member.
ACTION: None
REFERENCES: None
+-----------------+
| H S M 0 0 0 1 1 |
+-----------------+
TEXT: %LINE
TYPE: Information
REASON: This message lists the contents of the HSMOPS
member.
ACTION: None
REFERENCES: None
+-----------------+
| H S M 0 0 0 1 5 |
+-----------------+
TEXT: >>>>> KEYWORD NOT RECOGNIZED KEYWORD=%TOKEN1.
TYPE: Error
REASON: An invalid keyword has been specified in HSMOPS.
ACTION: Specify a valid keyword and resubmit HSMPGEN.
REFERENCES: Section 7.3.2
+-----------------+
| H S M 0 0 0 1 6 |
+-----------------+
TEXT: >>>>> SYSID NOT 1 TO 4 CHARACTERS IN LENGTH.
SYSID=%TOKEN2.
TYPE: Error
REASON: The SYSID value specified on the OPTIONS statement
is greater than 4 characters in length. SYSID must
be between 1 and 4 characters in length.
ACTION: Specify a valid value for SYSID and resubmit
HSMPGEN.
REFERENCES: Section 7.3.2
+-----------------+
| H S M 0 0 0 1 7 |
+-----------------+
TEXT: >>>>> INTERVAL TIME VALUE MUST BE 1-999 HOURS.
VALUE=%TOKEN3.
TYPE: Error
REASON: The interval time specified on the OPTIONS
statement is not between 1 and 999.
ACTION: Specify a value between 1 and 999 and resubmit
HSMPGEN.
REFERENCES: Section 7.3.2
+-----------------+
| H S M 0 0 0 2 0 |
+-----------------+
TEXT: ---- END OF HSMOPS MEMBER.
TYPE: Information
REASON: This message is issued after the contents of
HSMOPS has been printed.
ACTION: None
REFERENCES: None
+-----------------+
| H S M 0 0 0 2 4 |
+-----------------+
TEXT: OPTIONS STATEMENT MISSING. ASSUMING DURATION OF 24
HOURS AND ACCEPTANCE OF INPUT FROM ANY SYSID.
TYPE: Information
REASON: The options statement was not found in HSMOPS.
A default interval of 24 hours is used and
the HSM component will process data from
any SYSID.
ACTION: None
REFERENCES: Section 7.3.2
+-----------------+
| H S M 0 0 0 2 7 |
+-----------------+
TEXT: ACCOUNTING STATEMENT MISSING. ASSUMING
COMPUTATION OF STORAGE COST AT -DAYS- TIME SPAN.
TYPE: Information
REASON: The ACCOUNTING statement has not been specified in
HSMOPS. If you use the CA MICS Accounting and
Chargeback Option, the storage cost computation
for the HSM component will be performed at the
DAYS timespan.
ACTION: None
REFERENCES: Section 7.3.2
+-----------------+
| H S M 0 0 0 2 8 |
+-----------------+
TEXT: INVALID PARAMETER FOR %TOKEN1 KEYWORD. SPECIFY
%CHOICE1 OR %CHOICE2.
TYPE: Error
REASON: For the ACCOUNTING statement, the valid keywords
are DETAIL and DAYS.
ACTION: Specify either DETAIL or DAYS on the ACCOUNTING
statement and resubmit HSMPGEN.
REFERENCES: Section 7.3.2
+-----------------+
| H S M 0 0 0 3 0 |
+-----------------+
TEXT: >>>>> ERROR(S) ENCOUNTERED IN HSMOPS PARM
DEFINITIONS.
>>>>> $HSMMSTR GENERATION ABORTED.
>>>>> CORRECT ERROR(S) AND EXECUTE AGAIN.
TYPE: Error
REASON: One or more errors were encountered during the
HSMPGEN process.
ACTION: Correct the errors and resubmit HSMPGEN.
REFERENCES: None
+-----------------+
| H S M 0 0 1 0 0 |
+-----------------+
TEXT: --------------- BEGIN PHASE 1 ---------------
TYPE: Information
REASON: This message is issued during Phase 1 of the
DAY095 step of the DAILY job.
ACTION: None
REFERENCES: None
+-----------------+
| H S M 0 0 1 0 1 |
+-----------------+
TEXT: AT LEAST ONE RECORD WITH SYSID NOT DEFINED IN
HSMOPS (%ORGSYSID).
-- THE DEFAULT DURATION FROM PARMS(HSMOPS) WILL
BE USED
-- WHEN AN HSM INVENTORY IS COLLECTED FOR THE
FIRST TIME.
TYPE: Information
REASON: An undefined SYSID has been encountered during
the processing of the DAY095 step. A default
duration value from HSMOPS will be assigned.
ACTION: None
REFERENCES: None
+-----------------+
| H S M 0 0 1 0 2 |
+-----------------+
TEXT: AT LEAST ONE RECORD READ WITH BAD VCH RECORD ID.
(%VCHID). SUCH RECORDS ARE DELETED.
TYPE: Warning
REASON: Records were found with a record ID that is
invalid. The record ID must be VCH. The records
are deleted, and the option-deleted counter is
incremented.
ACTION: Check to see if invalid data is being input to
the DAY095 step.
REFERENCES: None
+-----------------+
| H S M 0 0 1 0 3 |
+-----------------+
TEXT: VCH VERSIONS PRIOR TO %VER ARE NO LONGER SUPPORTED
TYPE: Error
REASON: The input data being processed is from a version
of the HSM data collector that is not supported.
ACTION: Ensure that the version of the HSM data collector
being used is supported.
REFERENCES: None
+-----------------+
| H S M 0 0 1 0 4 |
+-----------------+
TEXT: FIRST INPUT TIMESTAMP IS FROM SYSID (%ORGSYSID)
-- VERSION (%VER) DATA CREATED ON %ENDTS.
-- COMPUTED DURATION = %TIME
-- BASED ON A PREVIOUS COLLECTION ON %PREVTS
TYPE: Information
REASON: The message identifies the first input timestamp,
SYSID, version of the data, computed duration,
and the last time the collection was done.
ACTION: None
REFERENCES: None
+-----------------+
| H S M 0 0 1 1 0 |
+-----------------+
TEXT: HSM INVENTORY TRAILER RECORD <<%COND>> FOR
SYSID (%ORGSYSID)
-- VERSION (%VER) DATA CREATED ON %ENDTS.
TYPE: Information
REASON: This message flags the presence or absence of the
HSM inventory trailer record. The value of the
variable COND can take on the values of FOUND or
MISSING. If the trailer record is missing, then
HSM00116W is issued. This may cause input data to
be deleted.
ACTION: If the HSM inventory trailer record is missing,
then refer to HSM00205W.
REFERENCES: None
+-----------------+
| H S M 0 0 1 1 1 |
+-----------------+
TEXT: RECORD-TYPE CODE COUNT
INCOMING
TYPE: Information
REASON: This message is issued when the HSM inventory
trailer record has been found. This message is
followed by HSM00112I.
ACTION: None
REFERENCES: None
+-----------------+
| H S M 0 0 1 1 2 |
+-----------------+
TEXT: -- %RECTYPE %RECCODE %RECCNT %ENDTS
%COND
TYPE: Information
REASON: This message is issued when the HSM inventory
trailer record has been found.
ACTION: None
REFERENCES: None
+-----------------+
| H S M 0 0 1 1 6 |
+-----------------+
TEXT: DATA WITH THIS ENDTS WILL BE PURGED TO AVOID
DUPLICATION
-- BY A LATER RERUN OF A COMPLETED INVENTORY.
TYPE: Warning
REASON: A HSM inventory trailer record has not been found
for the data being processed. This usually means
that a partial HSM inventory took place. These
records are purged as they are from a partial
inventory to avoid duplicate data situations.
ACTION: See HSM00205I for action that may be needed.
REFERENCES: None
+-----------------+
| H S M 0 0 2 0 0 |
+-----------------+
TEXT: --------------- BEGIN PHASE 2 ---------------
TYPE : Information
REASON: This message is issued during Phase 1 of the
DAY095 step of the DAILY job.
ACTION: None
REFERENCES: None
+-----------------+
| H S M 0 0 2 0 5 |
+-----------------+
TEXT: FOLLOWING RECORDS PURGED FROM (%FILE) FILE -
SYSID (%SYSID)
-- INVENTORY FROM %ENDTS IS BEING DISCARDED.
TYPE: Warning
REASON: Records have been purged from the indicated file
because the complete inventory has not been input
to the DAY095 step. This situation happens for
two main reasons:
o If the CA MICS HSM component records are being
written to SMF and an unexpected failure caused
the Space Collector scan job to abend, a partial
output is written to SMF. When the job is
restarted and completes successfully, a complete
output is produced. If both the partial output
and the complete output are input to the DAY095
step, this message will be issued.
o If the Space Collector job is running and SMF
dumping takes place, only a partial output is
written to tape. The rest of the output will be
written the next time SMF dumping is done. This
will cause the DAY095 to reject these records.
ACTION: If the second scenario is the reason for this
message, then schedule the Space Collector job so
that the HSM inventory completes before SMF
dumping is done at your site.
REFERENCES:
+-----------------+
| H S M 0 0 2 0 6 |
+-----------------+
TEXT: D A T A S E T N A M E
TYPE: Information
REASON: Appears before HSM00207I and is preceded by
HSM00205I
ACTION: None
REFERENCES: None
+-----------------+
| H S M 0 0 2 0 7 |
+-----------------+
TEXT: %DSNAME
TYPE: Information
REASON: The data set record is being purged from the HSM
file.
ACTION: None
REFERENCES: None
+-----------------+
| H S M 0 0 2 0 8 |
+-----------------+
TEXT: ....SUPPRESSING FURTHER DISPLAY OF REJECTED
RECORDS.....
TYPE: Information
REASON: This message is issued after the limit of
HSM00207I is reached. The current limit is set to
40.
ACTION: None
REFERENCES: None
+-----------------+
| H S M 0 0 2 0 9 |
+-----------------+
TEXT: >>>>> %RECNUM RECORDS DELETED FROM %FILE.
TYPE: Information
REASON: The total number of records deleted from the file
indicated is given.
ACTION: None
REFERENCES: None
+-----------------+
| H S M 0 0 2 1 6 |
+-----------------+
TEXT: VOLSER COLLECTION-DATE
TYPE: Information
REASON: Appears before HSM00207I and is preceded by
HSM00205I.
ACTION: None
REFERENCES: None
+-----------------+
| H S M 0 0 2 1 7 |
+-----------------+
TEXT: %VOLSER %ENDTS
TYPE: Information
REASON: This message indicates the Volume record that is
being purged from the file indicated in the
HSM00209I message.
ACTION: See HSM00205I for action to take.
REFERENCES: None
+-----------------+
| H S M 0 0 3 0 0 |
+-----------------+
TEXT: SORTING DETAIL DATA INTO DAYS TIME-SPAN SEQUENCE
FOR FILE:
-- %WRKNAME
-- (EITHER) DAYS SEQUENCE IS NOT A SUBSET OF
DETAIL.
-- (OR) MULTIPLE ENDTS VALUES ARE PRESENT IN
THE INPUT DATA.
TYPE: Information
REASON: The sort sequence for the DAYS file is not a
subset of the DETAIL file, or there are multiple
ENDTS values in the data. This means a sort has to
be performed. If the sort sequence for the DAYS
file is a subset of the DETAIL file, then this
sort can be avoided, thus speeding up DAY095
processing.
ACTION: None
REFERENCES: None
+-----------------+
| H S M 0 0 9 9 9 |
+-----------------+
TEXT: ------- BEGIN SUMMARIZATION AND AGING -------
TYPE: Information
REASON: This message indicates that the summarization
process that summarizes the data into higher
timespans is starting.
ACTION: None
REFERENCES: None
Copyright © 2014 CA.
All rights reserved.
|
|