3. CAPACITY PLANNING DATABASE › 3.4 Meta Files › 3.4.3 Meta File Case Studies › 3.4.3.1 Combining Standard Applications › 3.4.3.1.2 Control Parameters
3.4.3.1.2 Control Parameters
Figures 3-109 through 3-115 show the control screens that
were used to create and execute this meta file definition
example.
/--------------------------- Meta File Definition ----------------------------\
|Command ===> |
|Enter a ? in any data entry field for more information on valid values. |
|Composing CAP DB File def.: DST - Distributed System Ex. |
| |
|Summarization Level |
| Primary ===> WEEKS (DETAIL/DAYS/WEEKS/MONTHS) |
| Secondary ===> ZONE (ZONE/HOUR/ENDTS/DAYNAME) |
| |
|Capacity Planner Data Base ===> PRIVATE (Private/Shared) |
| |
|Amount of data retained ===> 60 (1-9999 weeks) |
|Age of oldest forecast ===> 24 (1-9999 weeks) |
|History cycles ===> 3 (1-99 cycles) |
|Forecast cycles ===> 3 (1-99 cycles) |
| |
|Enable: |
| Notes report ===> YES (YES/NO) |
| Contents reports ===> YES (YES/NO) |
| |
|Specify extended options ===> N (Y/N/R) |
\------------------------------------------------------------------------------/
Figure 3-109. Specifying Parameters for the Meta File
The specifications on the Meta File Definition screen shown
in Figure 3-109 do the following:
o Set the primary summarization level to WEEKS
o Set the secondary summarization level to ZONE
o Indicate that the input standard applications are in the
private Capacity Planner database
o Indicate that extended options are not to be included in
the meta file
/------------------------------ Meta File ------------------------------------\
|Option ===> 2 |
| |
|Composing CAP DB file def.: DST - Distributed System Ex. |
| |
| |
| 1 - Insert Common Data Selection |
| Specify data selection criteria to apply to ALL files. |
| 2 - Insert CAP File and Data Element Selection |
| Select a Capacity Planner file and data elements. |
| 3 - Insert Cross-File Data Element Definition |
| Specify cross-file data element derivations. |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
\------------------------------------------------------------------------------/
Figure 3-110. Selecting CAP Files and Data Elements
Option 2, Insert CAP File and Data Element Selection, is
chosen on the Meta File screen shown in Figure 3-110.
The CAP File and Data Element Selection screens shown in
Figure 3-111 specify that the CAP File VX1 is being used.
The data elements to be included in the meta file are listed.
Note that since there will no summarization of this file, you
do not have to specify a processing exit for derived data
elements.
/-------------- Capacity Planner File and Data Element Selection ------------\
|Command ===> Scroll ===> CSR |
|Enter a ? in any data entry field for more information on valid values |
| |
|Composing CAP DB File def.: DST - Distributed System Ex. |
| |
|CAP file ===> VX1 (fff) - VAX/VMS SA - Stock Quote System |
| |
| -------Line Commands--------|
|Include CAPAPUs ===> N (Y/N) | I Insert C Copy D Delete ||
|Specify file exits ===> N (Y/N) | R Repeat E Calculations ||
| | S Depend Clauses & Label ||
| ----------------------------|
| Sum Data |
|Cmd Name Label (long name) D Type Type Order Len Output Format|
| - -------- ----------------------------- - ---- ---- ----- --- -------------|
| _ ADJCOMTM Adjusted Compatibility Mode Time |
| COMP T 120 13 TIME14.2 |
| _ ADJCPUTM Adjusted Total CPU Time |
| COMP T 120 13 TIME14.2 |
| _ ADJEXETM Adjusted Executive Mode Time |
| COMP T 120 13 TIME14.2 |
| _ ADJINTTM Adjusted Interrupt Stack Time |
| COMP T 120 13 TIME14.2 |
| _ ADJKERTM Adjusted Kernel Mode Time |
| COMP T 120 13 TIME14.2 |
| _ ADJMPSTM Adjusted Multi-Processor Sync Time |
| COMP T 120 13 TIME14.2 |
| _ ADJPCCOM Adjusted Compatibility Mode Percent |
| COMP N 120 5 MAPCT. |
| _ ADJPCCPU Adjusted Total CPU Percent |
| COMP N 120 5 MAPCT. |
\------------------------------------------------------------------------------/
Figure 3-111. CAP File and Data Element Selection Screen--Screen 1 (Part 1 of 7)
/-------------- Capacity Planner File and Data Element Selection -------------\
|Command ===> Scroll ===> CSR |
|Enter a ? in any data entry field for more information on valid values |
| |
|Composing CAP DB File def.: DST - Distributed System Ex. |
| |
|CAP file ===> VX1 (fff) - VAX/VMS SA - Stock Quote System |
| |
| -------Line Commands-------- |
|Include CAPAPUs ===> N (Y/N) | I Insert C Copy D Delete | |
|Specify file exits ===> N (Y/N) | R Repeat E Calculations | |
| | S Depend Clauses & Label | |
| ---------------------------- |
| Sum Data |
|Cmd Name Label (long name) D Type Type Order Len Output Format |
| - -------- ----------------------------- - ---- ---- ----- --- ------------- |
| _ ADJPCEXE Adjusted Executive Mode Percent |
| COMP N 120 5 MAPCT. |
| _ ADJPCINT Adjusted Interrupt Stack Percent |
| COMP N 120 5 MAPCT. |
| _ ADJPCKER Adjusted Kernel Mode Percent |
| COMP N 120 5 MAPCT. |
| _ ADJPCMPS Adjusted Multi-Processor Sync Percent |
| COMP N 120 5 MAPCT. |
| _ ADJPCSUP Adjusted Supervisor Mode Percent |
| COMP N 120 5 MAPCT. |
| _ ADJPCUSR Adjusted User Mode Percent |
| COMP N 120 5 MAPCT. |
| _ ADJSUPTM Adjusted Supervisor Mode Time |
| COMP T 120 13 TIME14.2 |
| _ ADJUSRTM Adjusted User Mode Time |
| COMP T 120 13 TIME14.2 |
| _ BASECPU Base CPU |
| RET A 000 10 _____________|
| _ DATE Interval End Date |
| RET D 000 7 DATE7. |
| _ DURATION Recording Interval Time (MODES sum) |
| ACCM T 050 13 TIME15.2 |
\------------------------------------------------------------------------------/
Figure 3-111. CAP File and Data Element Selection Screen--Screen 2 (Part 2 of 7)
/-------------- Capacity Planner File and Data Element Selection ------------\
|Command ===> Scroll ===> CSR |
|Enter a ? in any data entry field for more information on valid values |
| |
|Composing CAP DB File def.: DST - Distributed System Ex. |
| |
|CAP file ===> VX1 (fff) - VAX/VMS SA - Stock Quote System |
| |
| -------Line Commands--------|
|Include CAPAPUs ===> N (Y/N) | I Insert C Copy D Delete ||
|Specify file exits ===> N (Y/N) | R Repeat E Calculations ||
| | S Depend Clauses & Label ||
| ----------------------------|
| Sum Data |
|Cmd Name Label (long name) D Type Type Order Len Output Format|
| - -------- ----------------------------- - ---- ---- ----- --- -------------|
| _ INTERVLS Number of Recording Intervals (MODES) |
| ACCM N 050 8 _____________|
| _ MODCOMTM Compatibility Mode Time |
| ACCM T 050 13 TIME14.2 |
| _ MODCPUTM Total CPU Time |
| ACCM T 050 13 TIME14.2 |
| _ MODEXETM Executive Mode Time |
| ACCM T 050 13 TIME14.2 |
| _ MODIDLTM Idle Time |
| ACCM T 050 13 TIME14.2 |
| _ MODINTTM Interrupt Stack Time |
| ACCM T 050 13 TIME14.2 |
| _ MODKERTM Kernel Mode Time |
| ACCM T 050 13 TIME14.2 |
| _ MODMPSTM Multi-Processor Sync Time |
| ACCM T 050 13 TIME14.2 |
| _ MODPCCOM Compatibility Mode Percent |
| COMP N 050 5 MAPCT. |
| _ MODPCCPU Total CPU Percent |
| COMP N 050 5 MAPCT. |
| _ MODPCEXE Executive Mode Percent |
| COMP N 050 5 MAPCT. |
\------------------------------------------------------------------------------/
Figure 3-111. CAP File and Data Element Selection Screen--Screen 3 (Part 3 of 7)
/-------------- Capacity Planner File and Data Element Selection ------------\
|Command ===> Scroll ===> CSR |
|Enter a ? in any data entry field for more information on valid values |
| |
|Composing CAP DB File def.: DST - Distributed System Ex. |
| |
|CAP file ===> VX1 (fff) - VAX/VMS SA - Stock Quote System |
| |
| -------Line Commands--------|
|Include CAPAPUs ===> N (Y/N) | I Insert C Copy D Delete ||
|Specify file exits ===> N (Y/N) | R Repeat E Calculations ||
| | S Depend Clauses & Label ||
| ----------------------------|
| Sum Data |
|Cmd Name Label (long name) D Type Type Order Len Output Format|
| - -------- ----------------------------- - ---- ---- ----- --- -------------|
| _ MODPCIDL Idle Percent |
| COMP N 050 5 MAPCT. |
| _ MODPCINT Interrupt Stack Percent |
| COMP N 050 5 MAPCT. |
| _ MODPCKER Kernel Mode Percent |
| COMP N 050 5 MAPCT. |
| _ MODPCMPS Multi-Processor Sync Percent |
| COMP N 050 5 MAPCT. |
| _ MODPCSUP Supervisor Mode Percent |
| COMP N 050 5 MAPCT. |
| _ MODPCUSR User Mode Percent |
| COMP N 050 5 MAPCT. |
| _ MODSUPTM Supervisor Mode Time |
| ACCM T 050 13 TIME14.2 |
| _ MODUSRTM User Mode Time |
| ACCM T 050 13 TIME14.2 |
\------------------------------------------------------------------------------/
Figure 3-111. CAP File and Data Element Selection Screen--Screen 4 (Part 4 of 7)
/-------------- Capacity Planner File and Data Element Selection ------------\
|Command ===> Scroll ===> CSR |
|Enter a ? in any data entry field for more information on valid values |
| |
|Composing CAP DB File def.: DST - Distributed System Ex. |
| |
|CAP file ===> VX1 (fff) - VAX/VMS SA - Stock Quote System |
| |
| -------Line Commands--------|
|Include CAPAPUs ===> N (Y/N) | I Insert C Copy D Delete ||
|Specify file exits ===> N (Y/N) | R Repeat E Calculations ||
| | S Depend Clauses & Label ||
| ----------------------------|
| Sum Data |
|Cmd Name Label (long name) D Type Type Order Len Output Format|
| - -------- ----------------------------- - ---- ---- ----- --- -------------|
| _ MODVECTM CPU Time of Vector Consumers |
| ACCM T 050 13 TIME14.2 |
| _ SPRBIOS Buffered I/Os |
| ACCM N 050 13 |
| _ SPRCPUNI Number of Instructions Executed |
| ACCM N 050 13 |
| _ SPRCPUTM System CPU Busy Time |
| ACCM T 050 13 TIME14.2 |
| _ SPRDIOS Direct I/Os |
| ACCM N 050 13 |
| _ SPRFPGFL Free List Page Faults |
| ACCM N 050 13 |
| _ SPRINSWP Inswaps |
| ACCM N 050 13 |
| _ SPRIOVDR IOV IO Record Duration (Type 4) |
| ACCM T 050 13 TIME15.2 |
| _ SPRMPGFL Modified List Page Faults |
| ACCM N 050 13 |
| _ SPRPGEDR PGE PAGE Record Duration (Type 3) |
| ACCM T 050 13 TIME15.2 |
\------------------------------------------------------------------------------/
Figure 3-111. CAP File and Data Element Selection Screen--Screen 5 (Part 5 of 7)
/-------------- Capacity Planner File and Data Element Selection ------------\
|Command ===> Scroll ===> CSR |
|Enter a ? in any data entry field for more information on valid values |
| |
|Composing CAP DB File def.: DST - Distributed System Ex. |
| |
|CAP file ===> VX1 (fff) - VAX/VMS SA - Stock Quote System |
| |
| -------Line Commands--------|
|Include CAPAPUs ===> N (Y/N) | I Insert C Copy D Delete ||
|Specify file exits ===> N (Y/N) | R Repeat E Calculations ||
| | S Depend Clauses & Label ||
| ----------------------------|
| Sum Data |
|Cmd Name Label (long name) D Type Type Order Len Output Format|
| - -------- ----------------------------- - ---- ---- ----- --- -------------|
| _ SPRPGFLT Page Faults |
| ACCM N 050 13 |
| _ SPRPSBIO Buffered I/O Rate |
| COMP N 050 13 |
| _ SPRPSDIO Direct I/O Rate |
| COMP N 050 13 |
| _ SPRPSFLT Page Fault Rate |
| COMP N 050 13 |
| _ SPRPSFPL Free List Page Fault Rate |
| COMP N 050 13 |
| _ SPRPSINS Inswap Rate |
| COMP N 050 13 |
| _ SPRPSMPL Modified List Page Fault Rate |
| COMP N 050 13 |
| _ SPRPSRIO Read I/O Rate |
| COMP N 050 13 |
\------------------------------------------------------------------------------/
Figure 3-111. CAP File and Data Element Selection Screen--Screen 6 (Part 6 of 7)
/-------------- Capacity Planner File and Data Element Selection ------------\
|Command ===> Scroll ===> CSR |
|Enter a ? in any data entry field for more information on valid values |
| |
|Composing CAP DB File def.: DST - Distributed System Ex. |
| |
|CAP file ===> VX1 (fff) - VAX/VMS SA - Stock Quote System |
| |
| -------Line Commands--------|
|Include CAPAPUs ===> N (Y/N) | I Insert C Copy D Delete ||
|Specify file exits ===> N (Y/N) | R Repeat E Calculations ||
| | S Depend Clauses & Label ||
| ----------------------------|
| Sum Data |
|Cmd Name Label (long name) D Type Type Order Len Output Format|
| - -------- ----------------------------- - ---- ---- ----- --- -------------|
| _ SPRPSSYS System Page Fault Rate |
| COMP N 050 13 |
| _ SPRRDIOS Page Read I/Os |
| ACCM N 050 13 |
| _ SPRSYSFL System Page Faults |
| ACCM N 050 13 |
| _ SPRSYTCT SYT SYSTEM Record Count (Type 17) |
| ACCM N 050 8 |
| _ SPRSYTDR SYT SYSTEM Record Duration (Type 17) |
| ACCM T 050 13 TIME15.2 |
| _ SYSID System Identifier |
| RET A 050 4 |
| _ USRPCTOT User Mode as Percent of Total CPU |
| COMP N 120 5 MAPCT. |
| _ VUPS VAX Units of Power |
| RET N 050 13 |
| _ VUPSA VAX Units of Power Adjusted |
| RET N 120 13 |
| _ WEEK Week of Year |
| RET N 000 2 |
| _ YEAR Year of Century |
| RET N 000 2 |
| _ ZONE Time Zone |
| RET A 000 1 |
|****************************** BOTTOM OF DATA *******************************|
\------------------------------------------------------------------------------/
Figure 3-111. CAP File and Data Element Selection Screen--Screen 7 (Part 7 of 7)
The CAP File and Data Element Selection screens shown in
Figure 3-112 specify that the CAP File TD1 is being used.
The data elements to be included in the meta file are listed.
/-------------- Capacity Planner File and Data Element Selection ------------\
|Command ===> Scroll ===> CSR |
|Enter a ? in any data entry field for more information on valid values |
| |
|Composing CAP DB File def.: DST - Distributed System Ex. |
| |
|CAP file ===> TD1 (fff) - Tandem SA - ATM System |
| |
| -------Line Commands--------|
|Include CAPAPUs ===> N (Y/N) | I Insert C Copy D Delete ||
|Specify file exits ===> N (Y/N) | R Repeat E Calculations ||
| | S Depend Clauses & Label ||
| ----------------------------|
| Sum Data |
|Cmd Name Label (long name) D Type Type Order Len Output Format|
| - -------- ----------------------------- - ---- ---- ----- --- -------------|
| _ TDMCPUNO CPU Number |
| D RET N 050 3 |
| _ CAPAPU CPU Number |
| RET A 000 12 |
| _ CPECAHIT Cache Hits |
| ACCM N 050 13 |
| _ CPECBSTM CPU Busy Time |
| ACCM T 050 13 TIME14.2 |
| _ CPEDIOS Disk IOs |
| ACCM N 050 13 |
| _ CPEDISP Process Dispatches |
| ACCM N 050 13 |
| _ CPEIBSTM Interrupt Busy Time |
| ACCM T 050 13 TIME14.2 |
| _ CPEOVHTM Process Overhead Time |
| ACCM T 050 13 TIME14.2 |
\------------------------------------------------------------------------------/
Figure 3-112. CAP File and Data Element Selection Screen--Screen 1 (Part 1 of 3)
/-------------- Capacity Planner File and Data Element Selection ------------\
|Command ===> Scroll ===> CSR |
|Enter a ? in any data entry field for more information on valid values |
| |
|Composing CAP DB File def.: DST - Distributed System Ex. |
| |
|CAP file ===> TD1 (fff) - Tandem SA - ATM System |
| |
| -------Line Commands--------|
|Include CAPAPUs ===> N (Y/N) | I Insert C Copy D Delete ||
|Specify file exits ===> N (Y/N) | R Repeat E Calculations ||
| | S Depend Clauses & Label ||
| ----------------------------|
| Sum Data |
|Cmd Name Label (long name) D Type Type Order Len Output Format|
| - -------- ----------------------------- - ---- ---- ----- --- -------------|
| _ CPEPCBSY Percent CPU Busy |
| COMP N 050 5 MAPCT. |
| _ CPEPCIBS Percent CPU Interrupt Busy |
| COMP N 050 5 MAPCT. |
| _ CPEPCOBS Percent CPU Process Overhead Busy |
| COMP N 050 5 MAPCT. |
| _ CPEPCSBS Percent CPU Send Busy |
| COMP N 050 5 MAPCT. |
| _ CPEPSCAH Cache Hits Per Second |
| COMP N 050 5 |
| _ CPEPSDIO Disk IO Per Second |
| COMP N 050 5 |
| _ CPEPSDSP Dispatches per Second |
| COMP N 050 5 |
| _ CPEPSSWP Swap Rate Per Second |
| COMP N 050 5 |
|****************************** BOTTOM OF DATA *******************************|
\------------------------------------------------------------------------------/
Figure 3-112. CAP File and Data Element Selection Screen--Screen 2 (Part 2 of 3)
/-------------- Capacity Planner File and Data Element Selection ------------\
|Command ===> Scroll ===> CSR |
|Enter a ? in any data entry field for more information on valid values |
| |
|Composing CAP DB File def.: DST - Distributed System Ex. |
| |
|CAP file ===> TD1 (fff) - Tandem SA - ATM System |
| |
| -------Line Commands--------|
|Include CAPAPUs ===> N (Y/N) | I Insert C Copy D Delete ||
|Specify file exits ===> N (Y/N) | R Repeat E Calculations ||
| | S Depend Clauses & Label ||
| ----------------------------|
| Sum Data |
|Cmd Name Label (long name) D Type Type Order Len Output Format|
| - -------- ----------------------------- - ---- ---- ----- --- -------------|
| _ CPESBSTM Send Busy Time |
| ACCM T 050 13 TIME14.2 |
| _ CPESWAPS CPU Swaps |
| ACCM N 050 13 |
| _ CPETYPE CPU Type |
| RET A 050 8 |
| _ CPUCOUNT CPU Count |
| ACCM N 050 2 |
| _ DATE Interval End Date |
| RET D 000 7 DATE7. |
| _ DURATION Recording Interval Time |
| ACCM T 050 13 TIME15.2 |
| _ ZONE Zone |
| RET N 000 2 |
| _ SYSID System Identifier |
| RET A 000 4 |
| _ WEEK Week of Year |
| RET N 000 2 |
| _ YEAR Year of Century |
| RET N 000 2 |
|****************************** BOTTOM OF DATA *******************************|
\------------------------------------------------------------------------------/
Figure 3-112. CAP File and Data Element Selection Screen--Screen 3 (Part 3 of 3)
/--------------------------------- Meta File --------------Inquiry Validated.\
|Command ===> Scroll ===> CSR |
| |
|Composing CAP DB File def.: DST - Distributed System Ex. |
| |
|Update the capacity planning data base file ===> Y (Y/N) |
| |
|Line Cmds: S Select I Insert D Delete R Repeat |
| |
|Cmd Data Base File Definition Step |
| - ------------------------------------------------------------------ |
| _ Meta File Definition |
| _ CAP File & Data Element Sel.: VX1 - VAX/VMS SA - Stock Quote System |
| _ CAP File & Data Element Sel.: TD1 - Tandem SA - ATM System |
| _ Cross-File Data Element Definition |
|****************************** BOTTOM OF DATA *******************************|
| |
| |
| |
| |
| |
| |
| |
| |
\------------------------------------------------------------------------------/
Figure 3-113. Validating the Inquiry
After the meta file definition parameters are specified, the
meta file is used to validate the inquiry. Figure 3-113
shows this screen after VALIDATE is typed at the Command
prompt.
/----------------------- Update Capacity Planning File -------- Confirm Save.\
|Command ===> |
| |
|Modifying CAP DB File def.: DST - Distributed System Ex. |
| |
| |
|This file definition has been changed and must be saved before updating the |
|file. |
| |
| |
|Do you wish to save the file definition and update the file? ===> YES (YES/NO)|
| |
| |
| |
| |
|Instructions: |
| |
| Press ENTER key to save the file definition and update the file. |
| |
| Reply NO and press enter key to cancel the file update request. |
| |
| |
| |
\------------------------------------------------------------------------------/
Figure 3-114. Saving the Inquiry
The Update Capacity Planning File screen shown in Figure
3-114 is used to save the inquiry so that it can be executed.
/----------------------- Update Capacity Planning File ---------- DST Saved.-\
|Command ===> |
| |
|Composing CAP DB File def.: DST - Distributed System Ex. |
| |
|Update type ===> INITIALIZE (INITIALIZE/UPDATE)|
|Replace existing ===> N (Y/N) |
| |
|PRIVATE Capacity Planner data base cycle(s) ===> 01 - __ |
|Update start date ===> _________ (ddmonyy) |
|Number of weeks ===> 5__ (1-9999) |
| |
|Execution mode ===> BATCH (BATCH/FOREGROUND) |
| |
|List updated CAP DB file contents ===> YES (YES/NO) |
| |
| |
| |
| |
| |
| |
|Press END to invoke MICF inquiry execution to update the meta file. |
|Enter CANCEL to terminate the meta file update. |
\------------------------------------------------------------------------------/
Figure 3-115. Executing the Inquiry
Cycle 1 is specified as input to the database loading process
on the Update Capacity Planning File screen shown in Figure
3-115. Since we are doing an INITIALIZE all data in the
PRIVATE Capacity Planning database for these two standard
applications will be copied to our new meta file. The
updated meta file will be printed after the update is
complete.
Copyright © 2014 CA.
All rights reserved.
|
|