No job linkage exists.
The job linkage option is set to batch job execution.
The job linkage option is set to synchronized job execution.
The enumerated list of the possible weekdays that you can specify while scheduling a job is as follows:
The enumerated list of the possible period type you can specify while scheduling a job is as follows:
The enumerated list of the possible unit types is as follows:
The enumerated list of the possible unit object types are as follows:
The enumerated list of the possible parameters for executing asset management job check are as follows:
The enumerated list of the possible Component codes are as follows:
Specifies an enumerated list of values. The selected value indicates if the manager must wait for the deployment of the OS images.
You can use one of the following:
Specifies that the domain manager must not wait for the OS image to be deployed.
Specifies that the domain manager must wait for the OS image to be deployed.
Specifies the type of installation request.
You can use one of the following:
Specifies a planned installation request.
Specifies a scheduled installation request.
Specifies a current installation request.
Specifies the status of the installation request of the OSIM computer.
The following installation requests are possible:
Specifies a planned installation request of the target computer.
Specifies a scheduled installation request of the target computer.
Specifies the configuration state of an OSIM Computer
The following states are possible:
Specifies that the OSIM computer is in an unmanaged state.
Specifies that the OSIM computer is in a current state.
Specifies that the OSIM computer is in a stopped state.
Specifies that the OSIM computer is in a canceled state.
Specifies that the OSIM computer is in a failed state.
Specifies that the OSIM computer is in a planned state.
Specifies that the OSIM computer is in an activated state.
Specifies that the OSIM computer is in an analyzing state.
Specifies that the OSIM computer is in a pending state.
Specifies that the OSIM computer is in an installing state.
Specifies the type of property.
The following are the property types:
Specifies the type of property as MAC address.
Specifies the type of property as network address.
Specifies the type of property as host name.
Specifies the type of property as computer serial number.
Specifies the valid filter conditions for different properties.
You can use the following filters:
Defines the wildcard equal filter.
Note: Use this filter with xsd:string elements.
Defines the wildcard not equal xxx.
Note: Use this filter with xsd:string elements.
Defines the regular expression filter.
Note: Use this filter with xsd:string elements.
Defines the equal filter.
Note: Use this filter with xsd:long, dsm:DateTime, and enumerations.
Defines the not equal filter.
Note: Use this filter with xsd:long, dsm:DateTime, and enumerations.
Defines the greater than filter.
Note: Use this filter with xsd:long and dsm:DateTime elements.
Defines the greater than or equal filter.
Note: Use this filter with xsd:long and dsm:DateTime elements.
Defines lesser than filter.
Note: Use this filter with xsd:long and dsm:DateTime elements.
Defines the lesser than or equal filter.
Note: Use this filter with xsd:long and dsm:DateTime elements.
Specifies the OS image properties on which the sort and filter conditions can be applied.
The following are the OS image properties:
Specifies the name of the OS image.
Specifies the OS type.
Specifies the operating system of the OS image.
Specifies the registration date and time of the OS image with the domain manager.
Specifies the name of the software delivery package corresponding to the OS image.
Specifies the version of software delivery package corresponding to the OS image.
Specifies the OS code of the software delivery package corresponding to the OS image.
Specifies the locale of the OS image.
Specifies the FIPS image flags of the OS image.
Specifies the OSIM computer properties on which the sort and filter conditions can be applied.
The following are the OSIM computer properties:
Specifies the name of the OSIM computer.
Specifies the MAC Address of the OSIM computer.
Specifies the configuration state of the OSIM computer.
Specifies the changed or activation date and time of the OSIM computer.
Specifies the name of the OS image associated with the OSIM computer.
The enumerated list of computer properties that you can use for specifying search filters is as follows:
Filters based on computer UUID value.
Filters based on Computer name/label value.
Filters based on Computer Domain UUID value.
Filters based on the Computer Primary network address value.
Filters based on Computer Host UUID value.
Filters based on Computer Asset Source UUID value.
Filters based on Computer Hostname value.
Filters based on Computer Serial Number value.
Filters based on Computer Disk serial number value.
Filters based on Computer MAC Address value.
Filters based on Computer Asset tag value.
Filters based on Computer URI value.
Filters based on Computer System ID value.
Filters based on Computer Vendor Name value.
Filters based on Computer Domain Label value.
Filters based on Computer Creation user value.
Filters based on Computer last updated user value.
Filters based on Computer Agent Name value.
Filters based on Computer Agent Descriptions value.
Filters based on Computer User defined data1.
Filters based on Computer User defined data2.
Filters based on Computer User defined data3.
Filters based on Computer User defined data4.
Filters based on Agent Scalability server name
Filters based on Agent IP Address
Filters based on Computer Operation System value.
Filters based on Computer usage list value.
Filters based on Computer Creation date time.
Filters based on Computer last updated date time.
Filters based on Computer version number.
Filters based on Computer Agent trust level.
Filters based on Agent Creation date time.
Filters based on Agent last run date time.
Filters based on AM Agent Status.
Filters based on SD Agent Status.
Filters based on RC Agent Status.
Filters based on Protection Agent Status.
Filters based on Anti Spyware Agent Status.
Filters based on Antivirus Agent Status.
Filters based on HIPS Agent Status.
Filters based on Agent Restrictions.
Specifies the valid filter conditions for different computer properties.
The following are the available filters:
Defines the wildcard equal filter.
Note: Use this filter with xsd:string elements.
Defines the wildcard not equal filter.
Note: Use this filter with xsd:string elements.
Defines the equal filter.
Note: Use this filter with xsd:long, dsm:DateTime, and enumerations.
Defines the not equal filter.
Note: Use this filter with xsd:long, dsm:DateTime, and enumerations.
Defines the greater than filter.
Note: Use this filter with xsd:long and dsm:DateTime elements.
Defines the greater than or equal filter.
Note: Use this filter with xsd:long and dsm:DateTime elements.
Defines the lesser than filter.
Note: Use this filter with xsd:long and dsm:DateTime elements.
Defines the lesser than or equal filter.
Note: Use this filter with xsd:long and dsm:DateTime elements.
Indicates the AMAgent status on the target computer.
The following are the possible values:
Indicates that the computer is collected through the external asset functionality.
Indicates that the computer has violated a policy with severity as Alert.
Indicates that the computer has violated a policy with severity as Information.
Indicates that the computer has violated a policy with severity as Warning.
Indicates that the computer has a legacy asset management agent.
Indicates that the computer does not have the AM Agent plug-in installed.
Indicates that the computer is operational.
Indicates that the computer is preregistered.
Indicates the SDAgent status.
The following are the possible values:
Indicates that the computer is locked for migration.
Indicates that the computer is locked for move operation.
Indicates that the computer is locked by RAC.
Indicates that the computer is locked by RAC and Move.
Indicates that the computer is locked by RAC and ROAM.
Indicates that the computer is locked by ROAM.
Indicates that the computer does not have the SD Agent plug-in installed.
Indicates that the computer is preregistered.
Indicates that the computer is operational.
Indicates the RCAgent status.
The following are the possible values:
Indicates that the computer has an active session with a viewer.
Indicates that the computer can manage its own security settings and has an active session with a viewer.
Indicates that the computer can accept a request for a remote control session.
Indicates that the computer can manage its own security settings and accept a request for a remote control session.
Indicates that the Remote Control application on the computer has been locked. Active sessions have been terminated and no new sessions can be started with the computer.
Indicates that the computer can manage its own security settings but the Remote Control application on the computer has been locked. Active sessions have been terminated and no new sessions can be started with the computer.
Indicates that the computer has migrated Remote Control agents.
Indicates that the Remote Control agent has not been installed on the computer.
Indicates that the computer cannot accept a request for a remote control session, but the agent can be configured.
Indicates that that the computer manages its own security settings and cannot accept a request for a remote control session, but the agent can be configured.
Indicates that the computer is preregistered.
Indicates that that the computer has Remote Control agent installed but is not running.
Indicates that that the computer has Remote Control agent installed and manages its own security settings, but remote control is not running.
Indicates that the computer has the RC Status as Unknown.
Indicates the ProtectionAgent status.
The following are the possible values:
Indicates that the state of all three protection applications (CA Anti-Virus, CA Anti-Spyware, and CA HIPS) is "Not Installed" or "Unknown".
Indicates that the computer is preregistered.
Indicates that protection data has been retrieved and the state of at least one of the protection applications is different from "Operational" or "Not Installed."
Indicates that at least one protection application is installed and the individual states of all the installed applications are "Operational."
Indicates the Anti-Spyware agent status.
The following are the possible values:
Indicates that no protection data about ASPAgent is retrieved yet or agent object is preregistered.
Indicates that ASPAgent is operational.
Indicates that ASPAgent is installed but not operational.
Indicates that ASPAgent is not installed.
Indicates the Anti-Virus agent status.
The following are the possible values:
Indicates that no protection data about AVAgent is retrieved yet or agent object is preregistered.
Indicates that AVAgent is operational.
Indicates that AVAgent is installed but not operational.
Indicates that AVAgent is not installed.
Indicates the HIPS status.
The following are the possible values:
Indicates that no protection data about HIPS agent is retrieved yet or agent object is preregistered.
Indicates that HIPS agent is operational.
Indicates that HIPS agent is installed but not operational.
Indicates that HIPS agent is not installed.
Specifies the agent restrictions.
The following are the possible values:
Specifies that there are no agent restrictions.
Identifies the jobs blocked locally.
Identifies the jobs blocked centrally.
Identifies the jobs blocked locally and centrally.
Specifies the object type of the group you want to retrieve.
The following are the possible values:
Indicates that the group is a local group.
Indicates that the group is a replicated group.
Indicates that there is no preference and both the groups must be retrieved.
Indicates the target type of the query.
The following are the possible values:
Specifies that the target type of the query is custom.
Specifies that the target of the query is computers.
Specifies that the target of the query is user accounts.
Specifies that the target of the query is user profiles.
Specifies that the target of the query is OSIM computers.
Specifies the filter conditions for query properties.
The following are the available filters:
Applies wildcard characters in the filter condition for string values and filters the queries that match the wildcard pattern.
Applies wildcard characters in the filter condition for string values and filters the queries that do not match the wildcard pattern.
Specifies a filter condition for enumerations and filters the queries that match the specified enumeration value.
Specifies a filter condition for enumeration and filters the queries that do not match the specified enumeration value.
Specifies the filter conditions for hardware models.
The following are the available filters:
Applies wildcard characters in the filter condition for string values and filters the queries that match the wildcard pattern.
Applies wildcard characters in the filter condition for string values and filters the queries that do not match the wildcard pattern.
Specifies the components that are supported.
Specifies the list of status
Specifies the configuration parameters that are supported:
Corresponds to the config param “/itrm/usd/manager/MaxActivationTime”.
Corresponds to the config param “/itrm/usd/manager/MinActivationTime”.
Corresponds to the config param “/itrm/usd/manager/JobCleanupTime”.
Corresponds to the config param “/itrm/usd/manager/JobHistoryCleanupTime”.
Corresponds to the config param “/itrm/usd/manager/AlreadyInstalledStatus”.
Corresponds to the config param “/itrm/usd/manager/ FailImplicitDeliveries”.
Corresponds to the config param “/itrm/usd/manager/ CheckTemplatePolicies”.
Corresponds to the config param “/itrm/usd/manager/ RACAutomation”.
Corresponds to the config param “/itrm/usd/manager/ JobCleanupInterval”.
Corresponds to the config param “/itrm/usd/manager/ ForcedRestrictions”.
Specifies the configuration state of an OSIM Computer
The following states are possible:
Specifies that the OSIM computer is in an unmanaged state.
Specifies that the OSIM computer is in a current state.
Specifies that the OSIM computer is in a stopped state.
Specifies that the OSIM computer is in a canceled state.
Specifies that the OSIM computer is in a failed state.
Specifies that the OSIM computer is in a planned state.
Specifies that the OSIM computer is in an activated state.
Specifies that the OSIM computer is in an analyzing state.
Specifies that the OSIM computer is in a pending state.
Specifies that the OSIM computer is in an installing state.
The following sections describe all the enumerated types (enums) that the Automation Services uses for automated OS migration functionality. These structures are a mapping of the underlying layer functionality.
Specifies whether the assessment template is based on parameters or on a query.
Following are the possible values:
Specifies the name of the parameter used for creating the assessment template. For example, if you want to create an assessment template based on CPU speed, specify the parameter name as CPUSPEED.
Following are the possible values:
Specifies the data type of the parameter used for creating the assessment template.
Following are the possible values:
Specifies the properties of the assessment templates that you can use to filter and sort the list of assessment templates.
Following are the possible values:
Specifies the properties of assessment tasks:
Specifies the status of assessment job.
Following are the possible values:
Specifies the result group type.
Following are the possible values:
Specifies the type of the OSIM template.
Following are the possible values:
Specifies the valid filter conditions for different properties.
You can use the following filters:
Defines the wildcard equal filter.
Note: Use this filter with xsd:string elements.
Defines the wildcard not equal xxx.
Note: Use this filter with xsd:string elements.
Defines the equal filter.
Note: Use this filter with xsd:long, dsm:DateTime, and enumerations.
Defines the not equal filter.
Note: Use this filter with xsd:long, dsm:DateTime, and enumerations.
Defines the greater than filter.
Note: Use this filter with xsd:long and dsm:DateTime elements.
Defines the greater than or equal filter.
Note: Use this filter with xsd:long and dsm:DateTime elements.
Defines lesser than filter.
Note: Use this filter with xsd:long and dsm:DateTime elements.
Defines the lesser than or equal filter.
Note: Use this filter with xsd:long and dsm:DateTime elements.
Specifies the properties of the OSIM templates that you can use to filter and sort the list of OSIM templates.
Specifies the properties of the software deployment templates that you can use to filter and sort the list of software deployment templates.
Specifies the properties of the automation process:
Specifies the automation process modes:
Specifies the status of the automation process:
Specifies the status of the computers in the automation process:
Specifies the properties available in the automation result:
Specifies the log level:
Specifies the action to be taken on the automation process:
|
Copyright © 2013 CA.
All rights reserved.
|
|