Previous Topic: DCMT VARY MEMORY SyntaxNext Topic: DCMT VARY MT

DCMT VARY Commands › DCMT VARY MEMORY › DCMT VARY MEMORY Parameters

DCMT VARY MEMORY Parameters

broadcast-parms

Executes the DCMT command on all or a list of data sharing group members.

For more information on broadcasting and broadcast-parms syntax, refer to the section "How to Broadcast System Tasks" in the System Tasks and Operator Commands Guide.

hex-address

Specifies an address as the base location of the memory to be varied. Hex-address must be a 1 – 8-digit hexadecimal value identifying a location in memory within the DC/UCF address space. You can omit leading zeros.

PROgram program-specification

Specifies a program as the base location of the memory to be varied. Program-specification must identify a program or nucleus module residing in the DC/UCF address space.

Note: To identify a program that was loaded from an alternate data dictionary, specify DICTNODE or DICTNAME as described under Expansion of program-specification.

+ hex-offset

Specifies the relative offset of the memory to be varied from the base location. Hex-offset must be a valid hexadecimal value.

Default: 0

C ’character-literal’

Specifies the value to which the identified memory is to be changed. character-literal must be a valid character string.

Limits: 1-32 character string

X ’hexadecimal-literal’

Specifies the value to which the identified memory is to be changed. hexadecimal-literal must be a valid hexadecimal value.

Limits: 1-32 digits

VERify

Requests verification of the current memory content; if the verification fails, the command returns an error and does not change the contents of memory.

C

Indicates that the verify string is in character format.

X

Indicates that the verify string is in hexadecimal format.

‘verify-string’

Specifies the string to use to verify the current memory content. If the memory content does not match the specified string, verification fails.

Limits:

  • 1-32 character value if in character format.
  • 1-32 digit (16-byte) hexadecimal value if in hexadecimal format.

More Information

For more information about displaying memory contents, see the section DCMT DISPLAY MEMORY.

Expansion of program-specification

dictnode

Specifies the DDS node that controls the data dictionary from where the named program was loaded.

dictname

Specifies the alternate data dictionary from where the named program was loaded.

Note: Although dictnode and dictname are both optional parameters, if dictnode is specified and dictname is not specified, a “.” (period) must be included to represent the missing dictname parameter.

program-name

Identifies the name of a program or nucleus module that resides in the DC/UCF address space.

Version version-number

Specifies the version number of the named program.

Limits: 1 - 9999

Default: 1

Examples: Vary Memory Commands

DCMT VARY MEMORY

The following example illustrates the use of relative addressing from the start of a program to identify the location of memory to vary. The example also ensures that the offset is correct by verifying its contents before allowing the operation to proceed.

DCMT V MEMORY PROGRAM RHDCMTME +60 C 'CA TEST' VERIFY C 'CA-IDMS'
Program: RHDCMTME  Loadlib: CDMSLIB                                         
 <Addr>   <Offset>                 <Hex>                    <Character>     
38BEE860  00000000  C3C140E3 C5E2E340 41C0F000 4180C800  *CA TEST .{0...H.*

DCMT VARY MEMORY with a failed verify

The following example illustrates what happens if the contents of memory do not match the verification value.

DCMT V MEMORY PROGRAM RHDCMTME +60 C 'CA TEST' VERIFY C 'CA-IDMS'
Program: RHDCMTME  Loadlib: CDMSLIB                                           
IDMS DC269903 V73 VERIFY FAILED - VARY MEMORY NOT DONE                        
 <Addr>   <Offset>                 <Hex>                    <Character>       
38BEE860  00000000  C3C140E3 C5E2E340 41C0F000 4180C800  *CA TEST .{0...H.*