CA IDMS Documentation Changes
r18.5.00 and r18.5.00 Second Edition
1.0 About this Document
This document provides an overview of all
changes to CA IDMS manuals that have been made for the 18.5.00 and
18.5.00, 2nd Edition releases. Entries have the following
format:
Section where the change was
made—Short description of the
change.
The same entries (with links to the changed
sections) can also be found in the individual manuals.
Changes not related directly to a specific
document can be found in the Other
Documentation Changes section.
2.0 Contact CA Technologies
Contact
CA Support
For your convenience, CA Technologies provides
one site where you can access the information that you need for
your Home Office, Small Business, and Enterprise CA Technologies
products. At http://ca.com/support, you can access the following
resources:
- Online and telephone contact information for
technical assistance and customer services
- Information about user communities and
forums
- Product and documentation downloads
- CA Support policies and guidelines
- Other helpful resources appropriate for your
product
Providing Feedback About
Product Documentation
If you have comments or questions about CA
Technologies product documentation, you can send a message to
techpubs@ca.com.
To provide feedback about CA Technologies
product documentation, complete our short customer survey which is
available on the CA Support website at http://ca.com/docs.
3.0 ADS Reference Guide
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- DISPLAY—Updated the syntax
diagram.
The following documentation updates were made
for the 18.5.00 release of this documentation:
- Overview of ACCEPT—Added information
to the ACCEPT sections to document the new page-info parameter.
- Extended Run Units, Overview of Navigational
Database Access, READY—Added information concerning the use
of the new FORCE option.
- APPCCODE and APPCERC—Added an overview
table summarizing the APPCCODEs.
- Runtime Error-Status Codes—This
appendix was newly added, previously it was available in the ADS
Quick Reference Guide.
- Online Debugger Syntax—This appendix
was newly added, previously it was available in the ADS Quick
Reference Guide.
4.0 ADS DSECT Reference Guide
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- ADS DSECT Files—Updated the following
messages:
5.0 ASF User Guide
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- Input Parameter Statements—Added
several statements.
6.0 CA Culprit for IDMS Messages and
Codes Guide
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- Range 200 Messages, Range 350 Messages,
Range 100 - 9999 Abend Codes—Changed all references to
CULXPROF to CULPPROF.
- Range 000 Messages—Added message
C000004 which documents a load failure.
7.0 CA Culprit for IDMS Reference
Guide
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- IBM Language Environment
Requirements—Added section with details on LE runtime
requirements for z/OS and z/VSE.
- Overview, One-Step and Five-Step
JCL—Changed references to CULXPROF to CULPPROF.
- Update Installation Default Profile
Options—Updated to cover only current 18.5.00, 2nd Edition
functionality.
- z/VSE Operating System
Procedures—Updated according to current 18.5.00, 2nd Edition
functionality.
- Five-Step z/VSE JCL—Central Version,
Five-Step z/VSE JCL—Local Mode—Updated the example JCL
to include SORT1.SAMPS instead of hard-coded sort parameters.
- The Operating System Option section was
removed as it contained the documentation of the PROFILE OPSYS=
parameter which is obsolete.
- The z/VM Operating System Procedures section
was removed as it does not apply to release 18.5.
8.0 CA Culprit for IDMS User Modules
Guide
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- What You Can Do with CULLUS45—Added a
note about the hex value of '¢¢¢¢'.
9.0 CA Culprit for IDMS User Modules
Guide
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- What You Can Do with CULLUS45—Added a
note about the hex value of '¢¢¢¢'.
10 Callable Services Guide
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- Mandatory Parameters, Optional Parameter,
INREC Format, OUTREC Format—Moved these sections to the
correct locations in the Invoking System Tasks from Programs
chapter.
- RHDCSNON parameters—Added information
on PassTickets to the description of parameter 2.
11 Common Facilities Guide
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- BUFFERSTAT Report Field
Descriptions—Added section.
- z/VSE File Parameters—Added
section.
- Parameter Descriptions, Parameter
Summary—The WORK parameter was added.
- Parameter Summary—Added the z/VSE
File-Related Parameters table.
- Parameter Descriptions—The description
of the SAVE_SQL_SYNTAX parameter was updated.
The following documentation updates were made
for the 18.5.00 release of this documentation:
- Parameter Summary—The PRMPT_MSG and
SORT FIELD MAX LEN parameters were added to the Miscellaneous
Runtime Directives table. Added the DBIO_HICCUP parameter to the
Performance-Related Parameters table.
- Parameter Descriptions—The description
of the PRMPT_MSG, SORT FIELD MAX LEN, and DBIO_HICCUP parameters
were added.
12 Database Administration
Guide
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- RESTRUCTURE Utility Statement—Renamed
from RESTRUCTURE SEGMENT Utility Statement.
- Page Groups—Descriptions modified to
lift restrictions on index sets spanning page group
boundaries.
- DBNAME Statement—VERIFY ON/OFF
parameter description notes describing the run time check changed
to support Mixed Page Group Indexes.
- AREA Statement—The description of the
FORCE option for the default usage mode was added.
- Default Ready Mode Using Navigational
DML—The description of the FORCE option was added.
- Usage—Considerations for using the
FORCE Option with ADS Dialogs were added.
- Quick Reference Information—This new
appendix contains reference information that was previously
available in the DB Admin Quick Reference Guide.
- DISPLAY/PUNCH ALL Statement—The
RECursive parameter that appends “AS SYNTAX.” or
“AS COMMENT.” to each generated line of output was
added.
13 Database Design Guide
The
following documentation updates were made for the 18.5.00 release
of this documentation:
- Assigning Segments to Page
Groups—Removed indexes from the MPGI restriction
14 Database Log Analyzer Option
User Guide
The
following documentation updates were made for the 18.5.00 release
of this documentation:
- Reports Produced By CA IDMS Log
Analyzer—Added support for UTC time on Log Records.
- PROCESS Parameter / UTC—Added support
for the UTC keyword on the runtime directive PROCESS parameter.
15 DB Database Reorg Option User
Guide
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- Allocating Work Files—Added DBKEYS to
the Work Files and Corresponding Logical Units table.
16 Dictionary DSECT Reference
Guide
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- CA IDMS Dictionary DSECT Files—Updated
the following messages:
17 Dictionary Migrator User
Guide
The
following documentation updates were made for the the 18.5.00, 2nd
Edition release of this documentation:
- Sample JCL–The location of the SAMPJCL
members was corrected.
18 DML Online User Guide
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- Severity Codes—Added the message E2051
KEYWORD MISSING.
The following documentation updates were made
for the 18.5.00 release of this documentation:
- Using FIND/OBTAIN Commands—Updated the
commands used to assign a value to PAGE-INFO to include ACCEPT KEYn
FROM ... CURRENCY.
- CA IDMS DML Save Statements—Updated
ACCEPT KEYn FROM … CURRENCY syntax to include the PGRn
keyword, which allows for use of a page info identifier.
- CA IDMS DML Command
Restrictions—Updated the ACCEPT and RETURN section to include
a description of the page-info identifier.
- Severity Codes—Added the message E5019
ERROR RETRIEVING PAGEINFO.
- User Exit Module—Added the information
that USDMLXIT is dynamically loaded.
19 DML Reference Guide for
Assembler
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- @COPY IDMS—Added the conditions which
cause the DML to define record elements using the Assembler EQU
instruction.
- Output from the Precompiler—The output
from the DML precompiler has been updated.
- Output from the Assembler—The output
from the Assembler has been updated.
- IDMS Communications Block, 18-Byte
Communications Blocks—Updated the tables and field
descriptions.
The following documentation updates were made
for the 18.5.00 release of this documentation:
- @ACCEPT DBKEY FROM CURRENCY—Added the
PGINFO parameter to this statement.
- @ACCEPT DBKEY RELATIVE TO
CURRENCY—Added the PGINFO parameter to this statement.
- @Ready—The description of the FORCE
option was added.
- Online Debugger Syntax—This new
appendix was previously available in the Programming Quick
Reference Guide.
20 DML Reference Guide for
COBOL
The
following documentation updates were made for the 18.5.00, 2nd and
3rd Edition releases of this documentation:
- IDMS-STATUS Routine, Sample Batch Program as
Output from the DML Compiler, Sample Batch Program from the COBOL
Precompiler—Updated the code in the context of
IDMS-STATUS.
- Executing Programs—Added information
about the TRUNC option.
- Features Supported by CA IDMS—Added a
reference to the information about the TRUNC option.
- 18-Byte IDMS Block, 18-Byte IDMS DC
Block,Communications Blocks—Updated the tables and field
descriptions.
- Copying and Pasting COBOL Code from this
Guide—Added this section containing the recommendation to
copy COBOL code from the HTML version of this guide to preserve
indention.
The following documentation updates were made
for the 18.5.00 release of this documentation:
- IDMS STATUS Routine—Routine updated to
display last dbkey, page group, and database-key format.
- ACCEPT DB-KEY FROM CURRENCY—The
description of this statement was updated with information on the
PAGE-INFO parameter.
- READY—The description of the FORCE
option was added.
- ERROR-STATUS Condition Names—This new
section was previously available in the Programming Quick Reference
Guide.
- Online Debugger Syntax—This new
appendix was previously available in the Programming Quick
Reference Guide.
- ACCEPT TRANSACTION STATISTICS—Added a
sample of the TRANSACTION-STATISTICS to the description of the INTO
parameter.
- WORKING-STORAGE and LINKAGE
SECTIONS—Added the TRANSACTION-STATISTICS parameter.
21 DML Reference Guide for
PL/I
The
following documentation updates were made for the 18.5.00, 2nd and
3rd Edition releases of this documentation:
- IDMS_STATUS Routine Used Under Batch, Output
from the DML Precompiler, Output from the PL/I
Compiler—Updated the code in the context of IDMS-STATUS.
- IDMS DB Communications Block, 18-Byte
Communications Blocks—Updated the tables and field
descriptions.
The following documentation updates were made
for the 18.5.00 release of this documentation:
- IDMS STATUS Routine—Routine updated to
display last dbkey, page group, and database-key format.
- READY—The description of the FORCE
option was added.
- Online Debugger Syntax—This new
appendix was previously available in the Programming Quick
Reference Guide.
- ACCEPT TRANSACTION STATISTICS—Added a
sample of the TRANSACTION_STATISTICS to the description of the INTO
parameter.
- INCLUDE IDMS—Added the
TRANSACTION_STATISTICS parameter.
22 DSECT Reference Guide
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- TSTDS—Updated the 'DC Extended stats'
section.
The following documentation updates were made
for the 18.5.00 release of this documentation:
- CA IDMS DSECT Files—Updated the
following messages:
- #ACEDS
- #CURDS
- #FACDS
- #FIBDS
- #FORDS
- #LTEDS
- #STRDS
- #TCEDS
- #VIBDS
23 Glossary
The
following glossary entry was updated in the 18.5.00, 2nd Edition
release of this documentation:
- IDMSINFO service provider
- PassTicket
The following glossary entry was obsolete and
removed in the 18.5.00, 3rd Edition release of this
documentation:
The following new glossary entries were added
in the 18.5.00 release of this documentation:
- Universal time, coordinated (UTC)
- Automatic system tuning
- IDMSINFO service provider
- Health check
- Heartbeat
24 IDD DDDL Reference Guide
The
following documentation updates were made for the 18.5.00 release
of this documentation:
- DISPLAY/PUNCH ALL Statement—A
description of the new RECursive parameter that appends “AS
SYNTAX.” or “AS COMMENT.” to each generated line
of output was added.
- DISPLAY/PUNCH Examples—An example of
using the RECursive parameter was added.
- Entity-Type Syntax—The syntax diagrams
of all statements (except RECORD SYNONYM) have been updated with
the RECursive parameter.
25 Installation and Maintenance
Guide for z/OS
The
following documentation updates were made for the 18.5.00, 2nd and
3rd Edition releases of this documentation:
- Installing your Product from
Tape—Reworked and updated the whole chapter.
- Apply Preventive Maintenance—Added a
note to step 6 about HOLDDATA.
- z/OS Environment—Added information
about updating the PPT with the system key RHDCOMVS should run
in.
- Create the CAISAG Library—Updated with
information about customizing jobs manually.
- CA Endevor/DB Product—Fixed the LMP
code.
The following documentation updates were made
for the 18.5.00 release of this documentation:
- Load SVC Using CAIRIM—The new module
PMRTDATA was added to the list of authorized programs which must be
present when running CAIRIM.
- Refreshing Required Modules—The new
module PMRTDATA was added to the list.
- Installing Your Product Using CA
CSM—This section was updated to reflect the functionality of
CA CSM r5.1 and the change of the application name from CA MSM to
CA CSM.
- SQL Web Connect—This chapter was added
to document the new SQL Web Connect feature.
- Install CA IDMS Visual DBA Version 18 on the
PC—This section was updated to cover all options available
for installing CA IDMS Visual DBA.
- Installing your Product from Tape—This
section was moved to the appendix as installations from tape are no
longer common.
- Apply Preventive Maintenance – The job
names and the procedure have been updated in accordance with the
changes in SAMPJCL.
26 Installation and Maintenance
Guide for z/VSE
The
following documentation updates were made for the 18.5.00 release
of this documentation:
- SQL Web Connect—Added a section on the
setup required for SQL Web Connect.
- Introduction, System
Requirements—Updated sections according to 18.5
functionality.
- CA IDMS Installation Steps—Updated
this section according to 18.5 functionality, this included merging
the previously independent CA IDMS Tools Installation Steps section
into this section.
- CA ADS Alive Runtime
Parameters—Updated with 18.5 functionality.
- CA Database Extractor Runtime
Parameters—Updated with 18.5 functionality.
- CA IDMS Dictionary Migrator Runtime
Parameters—Updated with 18.5 functionality.
- CA IDMS DQF Runtime Parameters—Updated
with 18.5 functionality.
- CA IDMS/DML Online Runtime
Parameters—Updated with 18.5 functionality.
- General Sort Runtime
Parameters—Updated with 18.5 functionality.
- CAPRDSEL Utility—This appendix was
removed as it is obsolete.
- Maintenance Process—This chapter was
removed as it is unnecessary.
27 Journal Analyzer User Guide
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- Execution JCL (z/OS)—Updated the
description of the display-blksize
variable.
28 Log Analyzer User Guide
The
following documentation updates were made for the 18.5.00 release
of this documentation:
- Reports Produced By CA IDMS Log
Analyzer—Added support for UTC time on Log Records.
- PROCESS Parameter / UTC—Added support
for the UTC keyword on the runtime directive PROCESS parameter.
29 Messages and Codes Guide –
Volume 1
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- CA IDMS/DB Messages—Added new messages
DB001100 and DB001101.
- CA IDMS ABND Codes—Added an
explanation of the severity code for messages that begin with the
ABND prefix.
- CA IDMS/DB Messages—Added/revised the
messages DB002100 – DB002116.
- CA IDMS/DC Messages—Added/revised the
messages DC024000-DC024007, DC130103-DC130105, and
DC130400-DC130404.
- CA IDMS ABND Codes—Updated the reason
for the messages ABND 3959, ABND 3982, and ABND 3984.
- CA IDMS/DB Messages—Added the new
message DB003202.
- The title of the guide was amended to
include message number partitions to make the documentation easier
to use.
The following documentation updates were made
for the 18.5.00 release of this documentation:
- CA IDMS/DB Messages—Added new messages
DB002430 – DB002435.
- CA IDMS/DB Messages—Added new message
DB001104.
- CA IDMS/DC Messages—Added new messages
DC130001 – DC130309.
- ABNDBCOM—A description of this message
was added.
30 Messages and Codes Guide –
Volume 2
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- DC390005—Updated message.
- The title of the guide was amended to
include message number partitions to make the documentation easier
to use.
The following documentation updates were made
for the 18.5.00 release of this documentation:
- DC172998—Message updated due to the
addition of the page-info parameter.
- DC410010—Message added.
- DC410101—Message added.
31 Messages and Codes Guide -
Volume 3
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- The title of the guide was amended to
include message number partitions to make the documentation easier
to use.
32 Messages and Codes Guide –
Volume 4
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- DC999999—Updated two label return
codes specific to z/OS.
- CA IDMS Minor Codes—Corrected the
description of the status code 0364 that belongs to the minor code
64.
- VSE CAID Messages—Added this new
section.
- The title of the guide was amended to
include message number partitions to make the documentation easier
to use.
The following documentation updates were made
for the 18.5.00 release of this documentation:
- DC999999—This new message can occur in
the context of the Product Usage Tracking facility that is used
with the SQL Web Connect feature of IDMS/DB.
33 Navigational DML Programming
Guide
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- Error Handling—The description of the
2 IDMS-STATUS flavors was added.
- About the 10.2 Services Batch
Interface—Added information about IDMSIN01 functions and the
IDMS-STATUS routine.
The following documentation updates were made
for the 18.5.00 release of this documentation:
- READY Statement—The description of the
FORCE option was added.
- Area Usage Modes—The Default Usage
Modes subsection was updated with information on the FORCE option.
34 Online Log Display User
Guide
The
following documentation updates were made for the 18.5.00 release
of this documentation:
- Commands and Their Functions—Added
support for UTC time on Log Record displays.
- Command Summaries—Added support for
the UTC runtime command.
35 Performance Monitor System
Administrator Guide
The
following documentation updates have been made in the 18.5.00, 2nd
Edition release of this documentation:
- Overview—Added information about
external security product definitions which enable canceling a
remote CA IDMS task.
- Parameters—Updated information about
monitoring systems remotely; monitored CVs must be running
non-swappable.
- DSECTs—Corrected content of #PMHDRDS
and #PMS30DS.
The following documentation updates have been
made in the 18.5.00 release of this documentation:
- Task Code Entry Options—The syntax of
the SYStem parameter has changed.
- Overview—Added the information that
IDMSINFO must be running to remotely monitor a CV.
36 Performance Monitor User
Guide
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- Active User Task Detail (PF4)—Updated
with information about the possibility to cancel tasks running on
remote Central Versions.
- Control Keys and Commands—Updated
information about monitoring systems remotely; monitored CVs must
be running non-swappable.
The following documentation updates were made
for the 18.5.00 release of this documentation:
- Control Keys and Commands—Updated the
SYStem command details. Noted that the IDMSINFO address space must
be running in order to remotely monitor a CV with Performance
Monitor.
- Active System Summary (PF19)—Added
this topic to explain a new screen.
37 Schema Mapper User Guide
The
following documentation updates were made for the 18.5.00 release
of this documentation:
- PROCESS Syntax—Added COMPNAME and
DCOMNAME syntax to the PROCESS statement. This syntax allows the
user to specify a custom compression and/or decompression database
for Schema Mapper to access.
38 Security Administration
Guide
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- External Security Enforcement—Updated
information about the use of SAF and RACROUTE.
- External Signon Security—Added
information about the definition of PassTickets.
- Identifying Authorities to External
System—Updated to reflect AISSF to RACROUTE authority
changes.
- Defining Signon Security Options—Added
information about using PassTickets.
- User Validation Processing—Added
information about using PassTickets.
39 SQL Programming Guide
The
following documentation updates were made for the 18.5.00 release
of this documentation:
- Requirements and Options for Host
Languages—This chapter now indicates that the use of embedded
SQL requires a full SQL license.
40 SQL Reference Guide
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- CA IDMS Scalar Functions—Updated the
syntax diagram for the TRIM function.
- Third-Party Acknowledgement—Updated
the copyright year.
The following documentation updates were made
for the 18.5.00 release of this documentation:
- CA ADS, COBOL, PL/I Data Types—The
information in this new appendix was previously available in the
SQL Quick Reference Guide.
- SQL Communication Area—The following
new subsections were added to this chapter from the SQL Quick
Reference Guide:
- COBOL/CA ADS SQLCA
- PL/I SQLCA
- SQLCODE and SQLCNRP Values
41 System Generation Guide
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- SYSTEM Statement Parameters, TASK Statement
Parameters, Internal Wait Time —Added information that the
INTERNAL WAIT parameter of the SYSTEM statement is no longer
functional. This parameter has been replaced by the INACTIVE
INTERVAL parameter of the TASK statement.
- SYSTEM Statement Usage—Updated the
recommended setting for the DEADLOCK DETECTION INTERVAL
parameter.
The following documentation updates were made
for the 18.5.00 release of this documentation:
- SYSTEM Statement—Changes to roll time
display documented.
42 System Operations Guide
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- UCF Operations—Reviewed and updated
all of the z/VSE -related information in this section.
- Step 4: Execute the Startup
Routine—Updated this section and its sub-sections to reflect
changes in the startup procedure.
- CICS Considerations—All z/VSE-related
information in this section was updated.
- Sample z/VSE JCL—This section was
added. All z/VSE sample JCL throughout the manual was updated to
use the JCL in this section.
- Configuring the Coupling
Facility—Moved the note on ALLOWAUTOALT(YES) to the end of
the discussion of cache structures.
- IDMSCINT Syntax, IDMSCINT
Parameters—Added the SSC12 parameter.
- CA IDMS Applications Which Must Not Be
Declared Threadsafe—Added section.
- Coding Parameters—Updated the
description of the FREESTG|FSTG= parameter.
- IDMSINFO Service Provider—Updated the
list of IDMSINFO functionality.
- SQL Web Connect—Updated to distinguish
between items specific to z/OS and z/VSE.
- Coding Parameters, Performance
Considerations—Updated information about monitoring systems
remotely; monitored CVs must be running non-swappable.
- Resynchronization Program Link Edit
(z/OS)—Updated the entry point in the example.
- #DEFSVC Syntax, #DEFSVC
Parameters—Removed obsolete parameters and updated
sub-section about Assembling and Link Editing IDMSVCTB.
- The IDMSCINT Application Stub
Program—Added this section.
- System Startup Under z/VSE—Updated
this section to conform with new functionality.
- WTOEXIT and WTOREXIT Implementation,
WTOEXIT, WTOREXIT, Coding Parameters—Updated with new
functionality, for instance linking WTOEXIT and WTOREXIT with
IDMSUXIT and z/VSE specifics.
- IDMSUXIT Module Creation—Updated the
section and added references to new sample JCL.
- Sample JCL—Added this section which
explains where to find sample JCL.
- Evaluating the zIIP Feature
Benefits—Updated information on the best way of estimating
the benefit of using the zIIP feature.
- #UDASCIC Parameters, #UDASBCH
Parameters—Updated the sample JCL.
- How to Use the UCF CICS Abort Session
Program—Updated the link edit parameters for UCFCICZ on
z/OS.
- Batch Front-ends—Updated the
information on calling the UDAS front-end from an Assembly or COBOL
program.
- System-invoked Numbered Exits—Added
the SQL Syntax Collecting exit (exit 39).
- IDMSOPTI Parameters (z/VSE)—Adjusted
the JCL used for assembling and cataloging the IDMSOPTI
module.
- z/VSE—Updated information on loading
an SVC user exit routine with IDMSDSVC.
- Steps to Add IDMSSVCX to Your
System—Updated information on using IDMSSVCX on z/VSE.
- Removed all references to the obsolete GVIS=
option (z/VSE only) and COMREG method.
The following documentation updates were made
for the 18.5.00 release of this documentation:
- PDSE Support—Updated to better show
how to use PDSEs in batch and TSO.
- IDMS_SCRATCH_IN_MEMORY Health
Check—This and other Health Check topics were updated to
provide more complete documentation on using and modifying [set to
your product name] health checks.
- zIIP Eligibility—Updated to better
document rules and restrictions regarding exploitation of zIIP
processors.
- IDMSINFO Service Provider—This chapter
describes the new IDMSINFO service provider.
- How the System Logs Errors—Updated to
describe IBM’s Breaking Event Address Register (BEAR) which
is newly supported.
- SQL Web Connect—This chapter describes
the new SQL Web Connect feature.
- File Cache in Memory—Updated sections
to reflect operating system support.
43 System Tasks and Operator
Commands Guide
The
following documentation updates were made for the 18.5.00 release
of this documentation:
- LOOK System Task—Replaced OPTIONAL
APARS with OPTION FLAGS.
- Startup Override Keywords—Updated how
the PROGRAM POOL and STORAGE POOL parameters are allocated.
- SIGNON System Task Parameters—Added
information about PassTickets to the description of the password
parameter.
- Example: DCMT DISPLAY LTERM
Command—Added the new Autotask column to the Logical Terminal
Table.
The following documentation updates were made
for the 18.5.00 release of this documentation:
- LOOK System Task—New options for AM,
BIND SQL, BIND SUBSCHEMA, DMCL, and SUBSCHEMA commands. DMCL
example updated to show new information.
- OLP System Task—New UTC and LOCAL
options for start and stop times.
- DCMT VARY STATISTICS—Changes to roll
time display documented.
44 Utilities Guide
The
following documentation updates were made for the 18.5.00 release
of this documentation:
- MAINTAIN INDEX—The record length for
SYS005 was increased to 32 and the sorting range for SORT4 was
altered.
- JCL Considerations for RESTRUCTURE CONNECT,
JCL Considerations for RESTRUCTURE, RESTRUCTURE, RESTRUCTURE
CONNECT—The spill file size must now be a multiple of 40
(previously it needed to be a multiple of 32).
- RESTRUCTURE, RESTRUCTURE,
RESTRUCTURE—These utility statements for z/OS, z/VSE and CMS
commands were renamed, the old name was RESTRUCTURE SEGMENT.
- JCL Considerations for IDMSDBAN2—Added
information about SYSLST.
- ARCHIVE JOURNAL—Updated the JCL
example and definition.
- Sample Output—Added an explanation of
how the number of entries in the top level SR8 is expressed in the
report output generated by the PRINT INDEX utility.
- REORG Syntax—Corrected the syntax for
the AREA parameter.
- Considerations for Running REORG on VSE, JCL
Considerations, REORG (z/OS), REORG (z/VSE)—Updated to
reflect that users must allocate a block size of 8192 to the REORG
control file (RORGCTL).
- PRINT TRACE parameters— Added a note
that print trace from multiple archive files is available only for
z/OS.
- ARCHIVE TRACE (z/OS), ARCHIVE TRACE
(z/VSE)—Added a reference to the sample JCL for the ARCHIVE
TRACE utility.
- PRINT TRACE (z/OS), PRINT TRACE
(z/VSE)—Added a reference to the sample JCL for the PRINT
TRACE utility.
- Sample JCL—Added this section which
explains where to find sample JCL.
- IDMSLOOK—Added the RHDCPINT
parameter.
- =Copy Facility—Updated syntax to
describe the new MEM=keyword.
The following documentation updates were made
for the 18.5.00 release of this documentation:
- EXTRACT JOURNAL—Added UTC
keyword.
- IDMSLOOK—Added new display options for
DMCL, SUBSCHEMA, BIND SUBSCHEMA, BINDSQL, and AM commands. Updated
sample reports to display all fields.
- MAINTAIN INDEX—Added DBNAME
support.
- PRINT INDEX—Updated to include new
syntax to specify a DBNAME instead of a SEGMENT name, and indexed
sets are now an option.
- PRINT JOURNAL—Added UTC keyword.
- PRINT LOG—Added UTC keyword.
- PRINT TRACE—Added UTC keyword and new
examples.
- REORG—Added support for DBNAME.
Changed description of cross-segment-dependencies and mixed page
groups.
- RESTRUCTURE CONNECT—Changed from
RESTRUCTURE CONNECT SEGMENT and added the db-name and segment-name
parameters.
- RESTRUCTURE—Changed from RESTRUCTURE
SEGMENT and added the db-name and segment-name parameters.
- ROLLBACK—Added UTC keyword.
- ROLLFORWARD—Added UTC keyword.
- UPDATE STATISTICS—Updated the
descriptions of the AREA and SCHEMA parameters, and the UPDATE
STATISTICS for a non-SQL-defined schema section.
- ARCHIVE LOG—Added UTC keyword.
- ARCHIVE TRACE—Added UTC keyword.
45 VSAM Transparency User
Guide
The
following documentation updates were made for the 18.5.00, 2nd
Edition release of this documentation:
- Installing CA IDMS VSAM Transparency in the
CICS Environment—Updated the section on Modifying CICSOPTS.
46 Other Documentation Changes
This section summarizes documentation changes
not directly related to a specific manual.
18.5.1 changes:
- End-to-end public bookshelf—The vast
majority of CA IDMS documentation is now available without any
restrictions on the CA IDMS public bookshelf. This means there is
no log in required to view this content, and the bookshelf as well
as the content of the guides available on the bookshelf is indexed
and can be found via search engines such as Google.
18.5.00 changes:
- End-to-end bookshelf—The documentation
for CA IDMS is now presented in an end-to-end bookshelf. As a
single point of entry, this bookshelf offers links to all manuals,
but also to other relevant information concerning CA IDMS.
- Scenarios—The following scenarios were
newly created for this version of CA IDMS:
- How to Expand the Employee Demo Database
With Mixed Page Group Index Sets
- How to Use SQL Web Connect
- Dictionary Diagram—This document was
added to the bookshelf.
- Quick Reference Guides—All Quick
Reference Guides have been phased out. Information that was not
already available in other guides was added to the according
guides.
Copyright © 2014 CA. All rights
reserved. All trademarks, trade names, service marks, and logos
referenced herein belong to their respective companies.