This section details messages generated by the CA Endevor SCM ISPF in the course of processing, along with possible causes and corrective actions to take in error situations.
Reason:
The action selected is undefined.
Action:
Select a valid action.
Reason:
The data set specified was not found in the System catalog.
Action:
Specify a valid data set.
Reason:
A Y(es) or N(o) is required for this field.
Action:
Enter the Y or N as appropriate.
Reason:
The SCL data set specified has incorrect attributes.
Action:
Enter the Y or N as appropriate.
Reason:
At least one JCL JOB card statement is required.
Action:
Add a JCL JOB card and execute the job.
Reason:
Informational message. The Batch Package Facility job was successfully submitted.
Action:
None.
Reason:
Informational message. The SCL statements were validated with no errors.
Action:
None.
Reason:
The SCL statements contained one or more syntax errors.
Action:
The syntax must conform to the standards described in the SCL Reference Guide.
Reason:
Informational message. The member was not found in the specified data set.
Action:
None.
Reason:
&PDVSCLCR action statements were written.
Action:
None. This is an informational message.
Reason:
The description field was left blank.
Action:
Enter a non-blank character in the description field.
Reason:
A Package ID is required when the DEFINE action is selected.
Action:
Enter the name of the Package you are defining in the Package ID field.
Reason:
A wild card Package ID is not allowed for the action selected.
Action:
Enter the full name of the Package ID.
Reason:
Informational Message. The Package ID specified was not found.
Action:
None.
Reason:
There were no Packages that matched the filter criteria.
Action:
None. This is an informational message.
Reason:
The Where Older than value must be blank or numeric.
Action:
Either make the field blank or enter the correct numerical value.
Reason:
Package &PDVCPKGI is not in a valid state for the action.
Reason:
The Package description field must be completed.
Action:
Provide a Package description in the Description field.
Reason:
The Package description field contains one or more single quote marks.
Action:
This is an informational message. If the text of the description contains imbedded spaces, they must be enclosed in single quotation marks.
Reason:
The Execution Window date field is required.
Action:
The Execution Window indicates the time frame within which the Package can be executed. Enter the start and end dates in the From and To fields in Execution Window.
Reason:
The Execution Window TIME field was left blank.
Action:
Enter the start and end times in the Execution Window FROM and TO fields.
Reason:
The dates in the Execution Window FROM and TO fields were not entered in the proper format.
Action:
Specify the Execution Window date in DDMMMYY format. For example, 01JAN98.
Reason:
The times in the Execution Window FROM and TO fields were not entered in the proper format.
Action:
Specify the Execution Window time in HH:MM format. For example, 12:00.
Reason:
The TO date and time is earlier than the current date and time.
Action:
Reenter the date and time and make sure that the date and time is later than the current date and time.
Reason:
The TO date and time is earlier than the FROM date and time.
Action:
Reenter the date and time to ensure that the FROM date and time is earlier than the TO date and time.
Reason:
Informational message. Package &PDVCPPKG does not exist.
Action:
None.
Reason:
The specified Package ID is invalid. The Package to be copied cannot be wild carded.
Action:
Specify the full name of the Package ID.
Reason:
The data set specified has invalid attributes.
Action:
Check the attributes specified and provide the correct attributes.
Reason:
The member specified already exists and NO REPLACE was specified.
Action:
Check the member name specified. If the member name is correct and you want to replace the existing member, specify Y in the REPLACE MEMBER field.
Reason:
The data set specified failed the validation process.
Action:
Specify a valid data set.
Reason:
A data set name is required for the &PDVACTN action.
Action:
Specify a valid data set name.
Reason:
The DEFINE action requires that SCL be provided for the Package.
Action:
Specify the location of the SCL to be added to the Package by specifying either an IMPORT SCL FROM or a COPY PACKAGE FROM clause to the DEFINE action. Resubmit the request.
Reason:
IMPORT SCL Data set and "Package to be copied" are mutually exclusive.
Reason:
You are not authorized for the &PDVACTN action against &PDVCPKGI Package.
Action:
Contact your administrator.
Reason:
The value specified is invalid.
Action:
Specify Y, N, or W for this field.
Reason:
The JCL Procedure name is required.
Action:
Specify the name of the JCL Procedure.
Reason:
The C1DEFLTS table does not contain a Package Data Set.
Reason:
The member name is too long or contains invalid characters.
Action:
Specify the correct member name.
Reason:
Informational message. A member was specified for a sequential data set.
Action:
None.
Reason:
The SCL data set failed the validation criteria.
Action:
Specify a valid SCL data set.
Reason:
The SCL data set member name cannot be wild carded.
Action:
Enter the full name of the SCL data set member.
Reason:
A partitioned data set requires a member name
Action:
Specify a valid member name.
Reason:
The SCL data set object could not be created
Action:
Contact CA Technical Support.
Reason:
The Package Dialog Work Area (PWA) could not be allocated.
Action:
Contact CA Technical Support.
Reason:
The dialog flow-of-control table could not be loaded.
Action:
Contact CA Technical Support.
Reason:
The XP Service Object does not exist.
Action:
Contact CA Technical Support.
Reason:
The value specified for Package Type is invalid.
Action:
The Package Type must be either STANDARD or EMERGENCY.
Reason:
The Execution Window can be changed ONLY when it is closed.
Action:
Close the Execution Window before making any changes.
Reason:
Package &PDVPKGID is not eligible to be modified.
Action:
Contact CA Technical Support.
Reason:
Foreground Execution of the &PDVACTN action is not supported.
Action:
Contact CA Technical Support.
Reason:
Package ID &PDVPKGID contains one or more invalid characters. Only alphanumeric, blanks, and the national characters # and $ are allowed in a Package ID.
Action:
Correct the invalid Package ID. Resubmit the request.
Reason:
Informational message. The SCL statement has been written to the SCL data set.
Action:
None.
Reason:
Informational message. This message confirms that the DEFINE action has been cancelled.
Action:
None.
Reason:
The specified action is not allowed for this Package. Enter HELP for more information.
Action:
Make note of the information and contact your administrator.
Reason:
The Package Note Text cannot contain imbedded single quotes.
Action:
This is an informational message. If the text of the Package Note contains imbedded spaces, they must be enclosed in single quotation marks.
Reason:
An internal error occured.
Action:
Contact CA Technical Support.
Reason:
The ISPF &PDVISRV. service failed with a return code of X&PDVERRRC
Action:
Contact CA Technical Support.
Reason:
Informational Message. The partitioned data set member has been saved.
Action:
None.
Reason:
The specified data set is in use by another user.
Action:
Retry later.
Reason:
Informational message. No members matched the specified pattern.
Action:
None.
Reason:
A serious ISPF/PDF EDIT or BROWSE error occurred.
Action:
Check the syntax of the command and issue it again.
Reason:
Informational message. The specified data set has been updated
Action:
None.
Reason:
Informational message. The requested member was not found in the SCL data set.
Action:
None.
Reason:
Informational message. No members matched the specified pattern or the SCL data set is empty.
Action:
None.
Reason:
Informational Message. The SCL data set or data set member was empty
Action:
None.
Reason:
The VALIDATE option is not yet available.
Action:
None.
|
Copyright © 2015 CA Technologies.
All rights reserved.
|
|