ENDE messages are issued during processing when you are using the CA Endevor SCM Quick Edit option.
Reason:
An invalid Span option was submitted on a batch request.
Action:
Correct the Span option and resubmit the request. Enter one of the following correct Span options: AUTOGEN SPAN NONE, AUTOGEN SPAN ALL, AUTOGEN SPAN SYSTEMS, or AUTOGEN SPAN SUBSYSTEMS.
Reason:
The EDITELM password was not provided in the C1DEFLTS table.
Action:
Add the EDITELM password to the C1DEFLTS table.
Reason:
One or more of the following fields are in error: Environment, System, Subsystem, or type.
Action:
Correct the field and try again.
Reason:
Either the ‘Search Map’ field is specified incorrectly or the ‘Include JCL’ field is specified incorrectly on the batch JCL panel.
Action:
Correct the field and try again.
Reason:
The Environment entered is not found. It is either not defined in the C1DEFLTS table or you do not have the proper authorization to access the Environment.
Action:
Perform one of the following actions:
Reason:
A footprint of an Element referred to an Environment in the defaults table, but the Environment does not exist, or no longer exists in the defaults table.
Action:
Validate that you are using the correct inventory. If in doubt, contact your CA Endevor SCM administrator. CA Endevor SCM will allow access to the files.
Reason:
The System specified is not defined to the Environment specified.
Action:
Perform one of the following actions:
Reason:
The Subsystem entered is not defined to the System specified.
Action:
Perform one of the following actions:
Reason:
The type entered is not defined to the System specified.
Action:
Perform one of the following actions:
Reason:
The processor group entered is not defined to the type specified.
Action:
Perform one of the following actions:
Reason:
The processor group entered is not defined to the type specified.
Action:
Perform one of the following actions:
Reason:
A wildcarded Environment name was entered into the Environment field. No Environments are defined which match the mask, or the user doesn’t have the proper authorization (security) to access any Environments which match the mask.
Action:
Perform one of the following:
Reason:
A wildcarded System name was entered into the System field. No Systems exist within the Environment specified which match the wildcarded mask.
Action:
Perform one of the following actions:
Reason:
A wildcarded Subsystem name was entered into the Subsystem field. No Subsystems exist within the System specified which match the wildcard mask.
Action:
Perform one of the following actions:
Reason:
A wildcarded type name was entered into the type field. No types exist within the System specified which match the wildcard mask.
Action:
Perform one of the following actions:
Reason:
A wildcarded processor group name was entered into the processor group field. No processor groups exist within the type specified which match the wildcard mask.
Action:
Perform one of the following actions:
Reason:
No Elements were found in the specified Environment, System, Subsystem, type or Stage. If search map was specified, the Element was not found anywhere in the map.
Action:
Correct the Element name, or ‘Create’ the Element.
Reason:
The Element name specified has one of the following problems:
Action:
Correct the field and try again.
Reason:
Some Elements may have been found in the specified Environment, System, Subsystem, type, and Stage (or in the map if search map was specified), BUT additional criteria was specified which prevented any Elements from being selected for processing. Such criteria includes:
Action:
Change or eliminate the additional search criteria, or change the Element name field.
Reason:
The comment field contains single quotation marks.
Action:
Remove the single quotation marks from the comment field.
Reason:
One or more of the following fields are in error:
The name specified has one of the following problems:
Action:
Correct the field and try again.
Reason:
The specified Stage ID is not defined for the specified Environment
Action:
Correct the Stage ID.
Reason:
The create option was specified in the Element selection list.
Action:
None.
Reason:
Two mutually exclusive options, retain Signout=y and Signout to ID, were specified together.
Action:
Either leave the Signout to ID blank or specify retain Signout=n.
Reason:
A component list action (LO or LL) was specified, but no data sets were selected from the component list.
Action:
Verify the component list contains the desired information.
Reason:
A component list action (Lo or LL) was specified, but the member was not found in the data set.
Action:
Verify the component list contains the desired information.
Reason:
A component list action (LO or LL) was specified and the output components did not reflect the actual output member locations because the component list was copied when the Element was last moved.
Action:
Verify the component list contains the desired information.
Reason:
A component list action (LO or LL) was specified and the member was not found in the data set. The output components no longer reflect the actual output member locations because the component list was copied when the Element was last moved.
Action:
Check the Component listing footprints from the CA Endevor SCM Footprints Display.
Reason:
Indicates a footprint error caused by one of the following:
Action:
Check the Component listing footprints from the CA Endevor SCM Footprint Display.
Reason:
The Element has been created and placed into the entry Stage of the Environment specified.
Action:
None.
Reason:
The Element has been saved and generated in the foreground.
Action:
None.
Reason:
The Element has been saved, but either the processor cannot execute in foreground or generate Element after edit was not selected on the entry panel.
Action:
A generation of the Element should be performed.
Reason:
As a result of entering a SAVE command in ISPF/PDF edit, a new delta level of the Element has been created.
Action:
None.
Reason:
The Element name field is blank. The CREATE action requires an Element name to be specified without any wildcard characters.
Action:
Correct the Element name field and try again.
Reason:
An Element with this name already exists in the inventory. It may exist in the location specified, or somewhere in the map. The map is always searched prior to allowing a new Element to be created.
Action:
Correct the Element name field, or EDIT the Element instead of attempting to CREATE the Element.
Reason:
When ISPF/PDF is entered to create a new Element, this message displays to indicate that the Element doesn't actually get created until you either save it, or exit ISPF/PDF and allow automatic save to occur. If you cancel from ISPF/PDF at this point, the Element will not be created.
Action:
None.
Reason:
The Element name field is wildcarded. The CREATE action requires an Element name to be specified without any wildcard characters.
Action:
Correct the Element name field and try again.
Reason:
When ISPF/PDF is entered to edit an existing Element, this message may be display indicating that the Element was found in the search map, not at the edit location. The Element will be fetched to the edit location when the first save is performed, or when exiting ISPF/PDR an automatic save occurs.
Action:
None.
Reason:
The System requires a CCID to be specified.
Action:
Specify a valid CCID.
Reason:
The System requires a comment to be specified.
Action:
Specify a valid comment.
Reason:
The System requires a CCID to be specified. Previously in this session, you used the CCID shown.
Action:
To use the CCID again, press ENTER or specify a new CCID.
Reason:
The System requires a comment to be specified. Previously in this session, you used the comment shown.
Action:
To use the comment again, press ENTER or specify a new comment.
Reason:
When prompted for a CCID or comment, the user entered the END command and canceled the request.
Action:
None.
Reason:
The user entered the CANCEL command while editing an Element. The save or creation of the Element is bypassed and essentially nothing has changed.
Action:
None.
Reason:
The user entered the CANCEL command while editing an Element, BUT the Element had already been saved by the SAVE command. Any changes entered after the SAVE command have not been recorded and the Element has not been generated.
Action:
The Element needs to be generated.
Reason:
The Element has been successfully generated in foreground.
Action:
None.
Reason:
The Element is signed out to another user and signout override has not been specified.
Action:
Contact the other user to sign in the Element, or specify signout override to edit/generate the Element anyway.
Reason:
The Element length (as defined in the type record) is greater than 255. ISPF/PDF does not allow editing of data sets where the LRECL is greater than 255.
Action:
If the Element length specified in the type record can be reduced to 255, change the Element length in the type record. Otherwise, no Elements of this type can be edited with QuickEdit.
Reason:
The request to browse the component list has failed. This Element does not have any component information. The request may be BX, CX, or HX.
Action:
None.
Reason:
The request to display the last level changes has failed. The request may be C (Element changes) or CX (component changes). If C, the Element does not have any change levels. If CX, it is the component list which does not have any changes.
Action:
None.
Reason:
The processor group is not valid for the specified type.
Action:
Correct the processor group field, or change to a different type.
Reason:
A save was specified. No changes were detected. A new level was not created. The Element may have been fetched and stored into the entry Stage if it did not exist there previously.
Action:
None.
Reason:
The ISPF/PDF edit session is complete. No Element changes were made.
Action:
None.
Reason:
The Element is currently being used by someone else. This may be an on-line user or a batch job.
Action:
Try again later when the Element may be available.
Reason:
CA Endevor SCM has locked the System while an UNLOAD or RELOAD is being performed.
Action:
Try again later after the System UNLOAD or RELOAD has finished.
Reason:
The security System rejects the request. The user is not authorized to perform the request against the Element.
Action:
Change the authority of the user.
Reason:
The generate processor is flagged to not allow execution in foreground.
Action:
Use batch generate to execute the generate processor in batch.
Reason:
The Environment name field was wildcarded and an Environment list presented. The user did not select any Environment from the list. Processing cannot continue without a valid Environment.
Action:
Specify a valid Environment name, or select an Environment from the list presented.
Reason:
The System name field was wildcarded and a System list presented. The user did not select any System from the list. For a CREATE request, processing cannot continue without a valid System. For an EDIT or GENERATE request, the 'Display System/Subsystem list' field is set to 'Y' and a System must be chosen from the list.
Action:
For a CREATE request, enter a valid System name, or select a System from the list presented. For an EDIT or GENERATE request, enter a valid System name, or select a System from the list presented, or change 'Display System/Subsystem list' field to 'N'.
Reason:
The Subsystem name field was wildcarded and a Subsystem list presented. The user did not select any Subsystem from the list. For a CREATE request, processing cannot continue without a valid Subsystem. For an EDIT or GENERATE request, the 'Display System/Subsystem list' field is set to 'Y' and a Subsystem must be chosen from the list.
Action:
For a CREATE request, enter a valid Subsystem name, or select a Subsystem from the list presented. For an EDIT or GENERATE request, enter a valid Subsystem name, or select a Subsystem from the list presented, or change 'Display System/Subsystem list' field to 'N'.
Reason:
The type name field was wildcarded and a type list presented. The user did not select any type from the list. This is a CREATE request and processing cannot continue without a valid type.
Action:
Specify a valid type name, or select a type from the list presented.
Reason:
The processor group name field was wildcarded and a processor group list presented. The user did not select any processor group from the list. Processing cannot continue without a valid processor group.
Action:
Specify a valid processor group name, or select a processor group name from the list presented.
Reason:
A selection list was presented and a character other than 'S' was placed in the select column in the list.
Action:
Use the proper select character - 'S'.
Reason:
A selection list was present and more than one item was selected.
Action:
Limit the selection to one entry.
Reason:
An invalid character was used in the field 'Generate Process or Mode'. Either an 'F' or 'B' must be used.
Action:
Change the character specified to 'F' or 'B'.
Reason:
A job has been submitted to generate the Element.
Action:
None.
Reason:
At least one JCL image is required in the JOB Card fields.
Action:
Specify at least one JCL image in the JOB Card fields.
Reason:
In the defaults panel, a valid unit name must be specified. The field is only checked for its presence, but an invalid name will cause allocation errors to occur during processing.
Action:
Specify a valid unit name.
Reason:
The user entered the END command and the update of the defaults was cancelled.
Action:
None.
Reason:
The defaults panel has been processed and all changes have been saved.
Action:
None.
Reason:
The value specified in the Space Unit field is not supported.
Action:
Enter BLK for logical block allocation, TRK for trace allocation, or CYL for cylinder allocation.
Reason:
The END key was pressed on the Action Options panel to cancel any updates.
Action:
Press ENTER to save the updates.
Reason:
The ENTER key was pressed on the Action Options panel to save any updates.
Action:
Press END to cancel the updates.
Reason:
A MOVE action was successfully completed.
Action:
None.
Reason:
The Element selected is in a backed out state. This means that the source for the Element is not reflected by the current outputs from the latest generate of the Element.
Action:
None.
Reason:
The ISPF/PDF BROWSE service set a return code greater than 4 when returning to QuickEdit. This is considered an error.
Action:
Note the return code value and notify your Systems programmer.
Reason:
The ISPF/PDF EDIT service set a return code greater than 4 when returning to QuickEdit. This is considered an error.
Action:
Note the return code value and notify your Systems programmer.
Reason:
The site supplied user exit 2 has canceled the request, but no message was set by the user exit.
Action:
Notify your site QuickEdit Administrator to examine the user exit 2 for reasons why the request was canceled.
Reason:
Message C1E0104E was issued indicating that the Element is currently signed out to another user, and Signout Override was specified on the QuickEdit panel. However, this user is not authorized to use Signout Override.
Action:
Communicate with the user who has the Element signed out.
Reason:
QuickEdit cannot be invoked recursively.
Action:
Use PF3 (END) to back up until the QuickEdit panels display again.
Reason:
When ISPF/PDF is entered to edit this Element, this message will display if the processor group is marked to not allow foreground execution.
Action:
None.
Reason:
The JCL panel was displayed and the user ended the request without the batch job being submitted.
Action:
None.
Reason:
A DELETE action was successfully completed.
Action:
None.
Reason:
The DELETE action with the ONLY COMPONENTS option was successfully completed.
Action:
None.
Reason:
An unexpected return code was returned from the specified ISPF/PDF service routine.
Action:
Make note of the information and notify your Systems programmer.
Reason:
An unexpected return code was returned from the internal $IMR service routine. Additional information can be obtained by entering HELP when the error occurs.
Action:
Make note of the information and contact your administrator.
Reason:
An unexpected return code was returned from the internal $SMR service routine. Additional information can be obtained by entering HELP when the error occurs.
Action:
Make note of the information and contact your administrator.
Reason:
QuickEdit has abended.
Action:
Make note of the information and contact your administrator.
Reason:
A required program cannot be found.
Action:
Most likely this is a CONLIB concatenation error. Review CONLIB allocations. If the problem persists, contact your administrator.
Reason:
An unexpected return code was returned from the internal $FPGR service routine. Additional information can be obtained by entering HELP when the error occurs.
Action:
Make note of the information and contact your administrator.
Reason:
SVC 99 (dynamic allocation) returned an unexpected return code. Additional information can be obtained by entering HELP when the error occurs.
Action:
Make note of the information and contact your administrator.
Reason:
This message is generated from the QE Action Options panel ENDIE150 when both Generate In Place and Generate NoSource are set to Y.
Action:
Either “Generate Element In Place” or “Generate Element NoSource” must be set to N.
Reason:
This message is generated from the Quick Edit Element Selection List panel ENDIE250 if options (B)rowse, (C)hange, (H)istory or (S)ummary are specified on a sourceless Element.
Action:
None.
Reason:
The user entered an END command or used the PF3 key command on the Target Location Specification panel ENDIE205. This user action canceled the dialog.
Action:
None.
Reason:
The chosen inventory location does not map to the selected element.
Action:
Enter another location or leave the environment, system and subsystem fields blank to be prompted with valid locations.
Reason:
The combination of the entered ENV/SYS/SBS values does not exist.
Action:
Enter another location or leave the environment, system and subsystem fields blank to be prompted with valid locations.
Reason:
The specified Environment does not exist in the CA Endevor SCM repository or you do not have security permission to access it.
Action:
Enter a valid Environment or select it from ENV selection panel.
Reason:
The specified System does not exist in the CA Endevor SCM repository or you do not have security permission to access it.
Action:
Enter a valid System or select it from the SYS selection panel.
Reason:
The specified Subsystem does not exist in the CA Endevor SCM repository or you do not have security permission to access it.
Action:
Enter a valid Subsystem or select it from the SBS selection panel.
Reason:
ISPF services used in the routine ended with an error.
Action:
Contact your CA Endevor SCM administrator.
Reason:
A QuickEdit program has abended while attempting to process the ISPF/PDF CANCEL, SAVE, or END comment. Additional information can be obtained by entering HELP when the error occurs.
Action:
Make note of the information and contact your administrator.
Reason:
A batch generate was requested. The JCL has been submitted to generate the Element.
Action:
None.
Reason:
A batch generate was requested. The user canceled the request.
Action:
None.
Reason:
An Element was edited and batch generate was requested. The edit was successful and the batch job submitted.
Action:
None.
Reason:
An Element was edited and batch generate was requested. The edit was successful, but the user cancelled the batch job submission.
Action:
The Element still needs to be generated.
Reason:
A COPYELM action was successfully completed.
Action:
None.
Reason:
A COPYELM action was canceled by pressing the END key without selecting any Element.
Action:
None.
Reason:
A DELETE action using the DELETE ACTION MODE =Batch command has been processed.
Action:
None.
Reason:
A DELETE action using the MOVE ACTION MODE=Batch command has been canceled.
Action:
None.
Reason:
A MOVE action with the MOVE ACTION MODE=Batch command has been processed.
Action:
None.
Reason:
A MOVE action using the MOVE ACTION MODE= Batch has been canceled.
Action:
None.
Reason:
The SIGNIN action was successfully completed.
Action:
None.
Reason:
The SIGNOUT action was successfully completed.
Action:
None.
Reason:
An attempt was made to generate an Element with the option GENERATE IN PLACE set to N. This option copies the Element back into the entry Stage for the generate of the starting Environment. However in this case, the Element could not be copied back because it was either at the target location already or at a Stage lower than the selected Element location.
Action:
You can perform any of the following actions, when this message appears:
|
Copyright © 2015 CA Technologies.
All rights reserved.
|
|