Error Codes and Messages › C1B Messages

C1B Messages

This section details messages generated in the course of processing, along with possible causes and corrective actions to take in error situations.

C1B0100I

HIGHEST ENDEVOR RC WAS return code

Reason:

Informational message. This message indicates the highest return code for an action.

Action:

None.

C1B0103I

PRINT MEMBER REQUEST - member name

Reason:

Informational message. This message indicates that a request was submitted to print the member named in the message.

Action:

None.

C1B0104I

member name SUCCESSFULLY PRINTED

Reason:

Informational message. This message indicates that the member named in the message was printed.

Action:

None.

C1B0107E

DDNAME "BSTPDS" NOT FOUND

Reason:

The input library for the footprint utility program was not specified, or the DDNAME in the JCL was misspelled.

Action:

Verify that the library was specified for the BSTPDS ddname.

C1B0108E

INVALID DATA SET SPECIFIED

Reason:

The input library specified for the footprint utility program was neither a partitioned CA Panvalet nor a CA Librarian library.

Action:

Verify that the library specification is one of the above library types.

C1B0109E

NO MEMBERS WERE FOUND IN LIBRARY THAT MATCHED SELECTION CRITERIA: dsname

Reason:

No members in the library allocated to the DDname BSTPDS matched the selection criteria (the library may be empty).

Action:

Verify that the selection criteria is correct.

C1B0110E

RUN WILL TERMINATE ABNORMALLY

Reason:

Premature termination of the job step was caused by previously encountered errors.

Action:

Correct the errors and resubmit the job.

C1B0111I

END OF JOB

Reason:

Informational message. This message is issued at termination of the footprint utility program.

Action:

None.

C1B0112I

RECORDS WRITTEN TO OUTPUT FILE: number of records

Reason:

Informational message. Issued during normal termination of the footprint utility program. The number of records written is the count of member/CSECT information records written to the output file.

Action:

None.

C1B0113I

PARAMETERS SPECIFIED AS INPUT TO PROGRAM BC1PFOOT

Reason:

Informational message. This message precedes the list of input parameters to the footprint utility program.

Action:

None.

C1B0114E

ERROR PROCESSING MEMBER member name. BC1PFOOT IS TERMINATING

Reason:

BC1PFOOT was unable to process the named member, and terminated.

Action:

Check any associated messages and take the appropriate corrective action.

C1B0114W

THIS MEMBERS IDR DATA CANNOT BE READ. MEMBER IS SKIPPED

Reason:

Warning. CA Endevor SCM is unable to read the identification record associated with this member in order to obtain footprint information. The member is skipped.

Action:

None.

C1B0200I

STATISTICS FOR LIBRARY = dsname

Reason:

Informational message. This message displays statistics associated with running the logical delete utility during library cleanup. Prior to exiting CA Endevor SCM, any elements deleted during source management are physically removed from the library at CA Endevor SCM termination. This message appears only if the base and delta libraries are partitioned data sets.

Action:

None.

C1B0201I

MEMBER ENTRIES DELETED = number of members

Reason:

This informational message indicates the number of members physically deleted by the logical delete facility. This facility is an internal routine that cleans up base and delta libraries when exiting CA Endevor SCM. Prior to exiting CA Endevor SCM, any Elements deleted during source management are physically removed from the library at CA Endevor SCM termination. This message appears only if the base and delta libraries are partitioned data sets.

Action:

None.

C1B0202I

MEMBER ENTRIES KEPT = number of members

Reason:

Informational message. This message indicates the number of members not physically deleted by the logical delete facility. This facility is an internal routine that cleans up base and delta libraries when exiting CA Endevor SCM. Prior to exiting CA Endevor SCM, any Elements deleted during source management are physically removed from the library at CA Endevor SCM termination. This message appears only if the base and delta libraries are partitioned data sets.

Action:

None.

C1B0203I

DIRECTORY BLOCKS READ = number of blocks

Reason:

Informational message. This message indicates the number of directory blocks read by the logical delete facility. This facility is an internal routine that cleans up base and delta libraries when exiting CA Endevor SCM. Prior to exiting CA Endevor SCM, any Elements deleted during source management are physically removed from the library at CA Endevor SCM termination. This message appears only if the base and delta libraries are partitioned data sets.

Action:

None.

C1B0204I

DIRECTORY BLOCKS WRITTEN = number of blocks

Reason:

Informational message. This message indicates the number of directory blocks written by the delete utility during library cleanup. Library cleanup occurs when exiting CA Endevor SCM. Prior to exiting CA Endevor SCM, any Elements deleted during source management are physically removed from the library at CA Endevor SCM termination. This message appears only if the base and delta libraries are partitioned data sets.

Action:

None.

C1B0205C

WARNING - SEQUENCE ERROR DETECTED, SKIPPING DUPLICATE ENTRY FOR member name

Reason:

This message indicates that a duplicate member name was found in the library when the logical delete utility was internally invoked during library cleanup. Library cleanup occurs when exiting CA Endevor SCM. Prior to exiting CA Endevor SCM, any Elements deleted during source management are physically removed from the library at CA Endevor SCM termination. This message appears only if the base and delta libraries are partitioned data sets. This error occurs if the base and delta libraries are physically damaged (for example, disk crash, operating System problems) when exiting CA Endevor SCM.

Action:

None. The next time you sign on to CA Endevor SCM, the library will be cleaned up.

C1B0206E

DIRECTORY HAS NO ENDING ENTRY

Reason:

Informational message. This message indicates that the library against which the logical delete utility was running does not contain an ending directory entry. Library cleanup occurs when exiting CA Endevor SCM. Prior to exiting CA Endevor SCM, any Elements deleted during source management are physically removed from the library at CA Endevor SCM termination. This message appears only if the base and delta libraries are partitioned data sets. This error occurs if the base and delta libraries are physically damaged (for example, disk crash, operating System problems) when exiting CA Endevor SCM.

Action:

None. The next time you sign on to CA Endevor SCM, the library will be cleaned up. If this error persists, the library must be restored and all updates must be re-applied.

C1B0207E

UNRECOVERABLE IO ERROR READING DIRECTORY

Reason:

An I/O error occurred when attempting to read a member from a library against which the logical delete utility was running. Library cleanup occurs when exiting CA Endevor SCM. Prior to exiting CA Endevor SCM, any Elements deleted during source management are physically removed from the library at CA Endevor SCM termination. This message appears only if the base and delta libraries are partitioned data sets. This error occurs if the base and delta libraries are physically damaged (for example, disk crash, operating System problems) when exiting CA Endevor SCM.

Action:

None. The next time you sign on to CA Endevor SCM, the library will be cleaned up. If this error persists, the library must be restored and all updates must be re-applied.

C1B0208E

UNRECOVERABLE IO ERROR WRITING DIRECTORY

Reason:

Informational message. This message indicates that the PDS directory was corrupted when the logical delete utility was internally invoked during library cleanup. Library cleanup occurs when exiting CA Endevor SCM. Prior to exiting CA Endevor SCM, any Elements deleted during source management are physically removed from the library at CA Endevor SCM termination. This message appears only if the base and delta libraries are partitioned data sets. This error occurs if the base and delta libraries are physically damaged (for example, disk crash, operating System problems) when exiting CA Endevor SCM.

Action:

None. If the error appears the next time you exit CA Endevor SCM, you probably have a corrupted partitioned data set. Restore the data set from a previous backup and retry action.

C1B0209I

LIBRARY PROCESSING COMPLETE, RETURN CODE=return code

Reason:

This is an informational message produced by the logical delete utility which was internally invoked during library cleanup. Library cleanup occurs when exiting CA Endevor SCM. Prior to exiting CA Endevor SCM, any Elements deleted during source management are physically removed from the library at CA Endevor SCM termination.

Action:

None. If error appears the next time you exit CA Endevor SCM, you probably have a corrupt partitioned data set. Restore the data set from a previous backup and retry action.

C1B0210E

LIBRARY PROCESSING ABORTED, RETURN CODE=return code

Reason:

Informational message. This message indicates the failure of the CA Endevor SCM logical delete utility during library cleanup. Library cleanup occurs when exiting CA Endevor SCM. Prior to exiting CA Endevor SCM, any Elements deleted during source management are physically removed from the library at CA Endevor SCM termination. This message appears only if the base and delta libraries are partitioned data sets. This error occurs if the base and delta libraries are physically damaged (for example, disk crash, operating System problems) when exiting CA Endevor SCM.

Action:

None. The next time you sign on to CA Endevor SCM, the library will be cleaned up. If this error persists, the library was probably damaged or an internal error is occurring. If you are unable to correct the problem or if the problem persists, contact your CA Endevor SCM Administrator.

C1B0211E

DATA SET IS NOT A PDS

Reason:

Informational message. This message indicates the failure of the CA Endevor SCM logical delete utility during library cleanup. Library cleanup occurs when exiting CA Endevor SCM. Prior to exiting CA Endevor SCM, any Elements deleted during source management are physically removed from the library at CA Endevor SCM termination. This message appears only if the base and delta libraries are partitioned data sets. This error occurs if the base and delta libraries are physically damaged (for example, disk crash, operating System problems) when exiting CA Endevor SCM.

Action:

None. This problem should be corrected the next time you sign on to CA Endevor SCM.

C1B0212E

CANNOT DETERMINE DATA SET TYPE

Reason:

Informational message. This message indicates the failure of the CA Endevor SCM logical delete utility during library cleanup. Library cleanup occurs when exiting CA Endevor SCM. Prior to exiting CA Endevor SCM, any Elements deleted during source management are physically removed from the library at CA Endevor SCM termination. This message appears only if the base and delta libraries are partitioned data sets. This error occurs if the base and delta libraries are physically damaged (for example, disk crash, operating System problems) when exiting CA Endevor SCM.

Action:

None. The next time you sign on to CA Endevor SCM, the library will be cleaned up.

C1B0213E

UNABLE TO OPEN LIBRARY

Reason:

Informational message. Indicates the failure of the CA Endevor SCM logical delete utility during library cleanup. Library cleanup occurs when exiting CA Endevor SCM. Prior to exiting CA Endevor SCM, any Elements deleted during source management are physically removed from the library at CA Endevor SCM termination. This message appears only if the base and delta libraries are partitioned data sets. This error occurs if the base and delta libraries are physically damaged (for example, disk crash, operating System problems) when exiting CA Endevor SCM.

Action:

None. The next time you sign on to CA Endevor SCM, the library will be cleaned up.