Error Codes and Messages › BTSQ Messages

BTSQ Messages

BTSQ messages are issued by CA Endevor SCM when you use the Build Type Sequence utility. This section details these messages along with possible causes and corrective actions to take in error situations.

BTSQ001E

CIBMINIT FAILURE. CALL ENDEVOR TECHNICAL SUPPORT

Reason:

See previous error messages for actual error.

Action:

Contact CA Technical Support if you cannot resolve the problem.

BTSQ002E

$IMR REQUEST FAILED. $IMR ERROR MESSAGE FOLLOWS

Action:

Contact CA Technical Support if you cannot resolve the problem.

BTSQ003E

STORAGE FAILURE. CALL ENDEVOR TECHNICAL SUPPORT

Reason:

The allocated memory is insufficient.

Action:

Increase the region size of the job and then rerun the job. If problem still occurs, contact CA Technical Support.

BTSQ004E

ACQUIRE ENTRY STORAGE FOR INTERNAL TBL FAILED, ERR: error text.

Reason:

Memory problem.

Action:

If the error text indicates lack of memory, increase the region size and re-run the job. If it is not a memory problem, call CA Technical Support.

BTSQ005E

TEMP WORK FILE OPEN FOR OUTPUT FAILED

Reason:

An open error occurred against an internal temporary work file.

Action:

Check the job output for any relevant messages. If the problem cannot be resolved, contact CA Technical Support.

BTSQ006E

WRITE TO TEMP FILE FAILED

Reason:

A write error occurred on an internal temporary work file.

Action:

Check the job output for any relevant messages. If the problem cannot be resolved, contact CA Technical Support.

BTSQ007E

CLOSE ON INTERNAL WORK FILE FAILED.

Reason:

An error occurred while closing the internal work file.

Action:

Check the job output for any relevant messages. If the problem cannot be resolved, contact CA Technical Support.

BTSQ008E

INTERNAL WORK FILE SORT FAILURE, RESULT= sort result

Reason:

Sort failure occurred on internal work file.

Action:

Check the sort result information and any other output sort related error messages. If the problem cannot be resolved, contact CA Technical Support.

BTSQ009E

INTERNAL WORK FILE OPEN FAILURE

Reason:

An error occurred while opening the internal work file.

Action:

Check the job output for any relevant error messages. If the problem cannot be resolved, contact CA Technical Support.

BTSQ010E

STORAGE PROBLEM WHILE ALLOCATING TYPE SEQUENCE JOB BLOCK

Reason:

Memory problem.

Action:

Increase the job's region size and re-run the job. Contact CA Technical Support if the problem continues.

BTSQ011E

OPEN OUTPUT ERROR ON TYPE SEQUENCE FILE

Reason:

An error occurred while opening the type sequence file for output.

Action:

Check the job output for any relevant messages. If the problem cannot be resolved, contact CA Technical Support.

BTSQ012E

READ ERROR ON INTERNAL WORK FILE

Reason:

A read error occurred on the temporary internal work file.

Action:

Check the job output for any relevant messages. If the problem cannot be resolved, contact CA Technical Support.

BTSQ013E

WRITE ERROR ON THE TYPE SEQUENCE FILE

Reason:

A write error occurred on the type sequence file.

Action:

Check the job output for any relevant messages. If the problem cannot be resolved, contact CA Technical Support.