This section details CA Endevor SCM messages generated in the course of PITR processing, along with possible causes and corrective actions to take in error situations.
Reason:
Internal error. The JLOGFUNC contained an unsupported value.
Action:
Contact your administrator.
Reason:
Internal error. DFLRUTN resulted in an invalid return code.
Action:
Contact your administrator.
Reason:
The named environment is not defined in the C1DEFLTS table.
Action:
Contact your administrator.
Reason:
The named environment exists, but the named stage is not defined to that environment.
Action:
Contact your administrator.
Reason:
The named data set was identified as a valid environment or package data set, but is not defined in the C1DEFLTS table.
Action:
Contact your administrator.
Reason:
Internal error. An abend has probably occurred, bypassing normal cleanup of an action or a package request. Automatic cleanup will terminate the transaction.
Action:
None.
Reason:
Internal error. An internal call to ACTNRUTN supplied an invalid request code.
Action:
Contact your administrator.
Reason:
Internal error. The transaction table was designed with a limit of concurrent transactions. This limit has been exceeded. For release 3.6, the maximum number of valid transactions should be 2. The table holds 15.
Action:
Contact your administrator.
Reason:
Internal error. The constructed data block is larger than the maximum block size allowed.
Action:
Contact your administrator.
Reason:
An error was encountered when closing the named journal file. The CA L-Serv name is the journal group ID associated with the file. The error code is the CA L-Serv error code. This message should be followed by a JLOG061I-JLOG089I message explaining the error code.
Action:
For an explanation of the error code, see the CA L-Serv documentation, and act accordingly.
Reason:
An error was encountered when terminating the CA L-Serv session for the named journal file. The CA L-Serv name is the group ID associated with the file. The error code is the CA L-Serv error code. This message should be followed by a JLOG061I-JLOG089I message explaining the error code.
Action:
For an explanation of the error code, see the CA L-Serv documentation, and act accordingly.
Reason:
An error was encountered when closing the named sequential journal file. The error code is a QIO hex error code.
Action:
Contact your administrator.
Reason:
An attempt to acquire JRNLDSCT main storage failed with the indicated reason code.
Action:
Increase the region size and try again.
Reason:
An attempt to acquire QIO buffer storage failed, returning the named reason code.
Action:
Increase the region size and try again.
Reason:
Internal error. An internal call to NQDQRUTN supplied an invalid request code.
Action:
Contact your administrator.
Reason:
CA L-Serv must be active in order to access the named journal file, but is not available. This message should be followed by a JLOG061I-JLOG089I message explaining the error code.
Action:
Make sure that CA L-Serv is available, and retry the request.
Reason:
Internal error. The VSAM GENCB for the ACB failed for the named journal file and journal group.
Action:
Contact your administrator.
Reason:
An open request for the named journal file and CA L-Serv has failed. This message should be followed by a JLOG061I-JLOG089I message explaining the error code.
Action:
For information about the error code, see the CA L-Serv documentation.
Reason:
A CA L-Serv statistics request for the named journal file and CA L-Serv has failed with the indicated return code.
Action:
For information about the error code, see the CA L-Serv documentation.
Reason:
The DD statement for the named file is not present.
Action:
Add the requested DD statement.
Reason:
An error was encountered when opening the named sequential journal file. The error code is a QIO error code.
Action:
Contact your administrator.
Reason:
The named CA L-Serv has identified the named journal file as a non-ESS VSAM file. Journal files must be ESDS VSAM files.
Action:
Reallocate the file as an ESDS file.
Reason:
A "GETID" request from the named CA L-Serv against the named journal file has failed, returning the indicated error code.
Action:
For information about the error code, see the CA L-Serv documentation.
Reason:
Internal error. An internal call to STORRUTN supplied an invalid request code.
Action:
Contact your administrator.
Reason:
An attempt to acquire main storage for LONGJLOG has failed with the indicated error code.
Action:
Increase the region size and try again.
Reason:
An attempt to acquire main storage for LONGPAGE has failed with the indicated error code.
Action:
Increase the region size and try again.
Reason:
An attempt to release main storage has failed with the indicated error code.
Action:
Contact your administrator.
Reason:
Internal error. An internal call to TASKRUTN has failed with the indicated reason code.
Action:
Contact your administrator.
Reason:
An attempt to locate the transaction block associated with the named task code has failed.
Action:
Contact your administrator.
Reason:
An attempt to acquire TASKDSCT main storage has failed with the indicated error code.
Action:
Increase region size and try again.
Reason:
An I/O error has occurred accessing the named file. The error code is a QIO error code.
Action:
Contact your administrator.
Reason:
An attempt to acquire JQIODSCT anchor storage in main storage has failed with the indicated reason code.
Action:
Contact your administrator.
Reason:
An attempt to acquire JQIODSCT anchor storage in main storage has failed with the indicated reason code.
Action:
Contact your administrator.
Reason:
CA L-SERV has identified the named file as an individual VSAM data set, not as a member of a journal group.
Action:
Check the CA L-SERV ADDFILE statement to make sure that the group name parameter has been specified correctly.
Reason:
CA L-SERV has identified the named file as a member of a group, but the required option of OUTPUT was not specified for this group.
Action:
Correct the CA L-SERV ADDFILE statement.
Reason:
CA L-SERV identified the named file as a member of a group, but the file did not have the required maximum record size of 32,640.
Action:
Check the journal data set allocations.
Reason:
A CA L-SERV check has failed for the named file under the named CA L-SERV. The macro should be identified as CHECK. The accompanying JLOG059E message explains the error code.
Action:
See the description of message JLOG059E.
Reason:
A VSAM GENCB RPL has failed for the named file under the named CA L-SERV. The macro should be identified as GENCB. The accompanying JLOG059I message explains the error code.
Action:
See the description of message JLOG059E.
Reason:
A VSAM GENCB RPL WRTBFR has failed for the named file under the named CA L-SERV. The macro should be identified as GENCB. The accompanying JLOG059I message explains the error code.
Action:
See the description of message JLOG059E.
Reason:
An LSERV WRTBFR has failed for the named file under the named LSERV. The macro should be identified as WRTBFR. The accompanying JLOG059I message explains the error code.
Action:
See the description of message JLOG059E.
Reason:
A MODCB has failed for the named file under the named CA L-Serv. The macro should be identified as MODCB. The accompanying JLOG059I message explains the error code.
Action:
See the description of message JLOG059E.
Reason:
An LSERV PUT has failed for the named file under the named CA L-Serv. The macro should be identified as PUT. The accompanying JLOG059I message explains the error code.
Action:
See the description of message JLOG059E.
Reason:
A L-Serv VSAM error has occurred. The information in this message is for diagnostic purposes. A JLOG061I-JLOG089I message should follow explaining particular error codes.
Action:
Contact your administrator.
Reason:
Informational message. This is a CA L-Serv return code.
Action:
None.
Reason:
Informational message. This is a CA L-Serv return code.
Action:
None.
Reason:
Informational message. This is a CA L-Serv return code.
Action:
None.
Reason:
Informational message. This is a CA L-Serv return code.
Action:
None.
Reason:
Informational message. A VSAM error prevented the file from being opened. This is a CA L-Serv return code.
Action:
None.
Reason:
Informational message. This is a CA L-Serv return code.
Action:
None.
Reason:
Informational message. A VSAM error prevented the file from being opened. This is a CA L-SERV return code.
Action:
None.
Reason:
Informational message. A VSAM error has occurred. This is a CA L-SERV return code.
Action:
None.
Reason:
Informational message. L-Serv encountered an unexpected request. This is a CA L-SERV return code.
Action:
None.
Reason:
Informational message. This is a CA L-SERV return code.
Action:
None.
Reason:
Informational message. An L-Comm SEND request failed or was rejected. This is a CA L-SERV return code.
Action:
None.
Reason:
Informational message. An L-Comm RECV request failed or was rejected. This is a CA L-SERV return code.
Action:
None.
Reason:
Informational message. An error occurred in an L-Comm RECV request. This is a CA L-SERV return code.
Action:
None.
Reason:
Informational message. An error occurred in an L-Comm RECV request. This is a CA L-SERV return code.
Action:
None.
Reason:
Informational message. A record lock is already being held by another user. This is an L- Serv return code.
Action:
None.
Reason:
Informational message. This is a CA L-SERV return code.
Action:
None.
Reason:
Informational message. This is a CA L-Serv return code.
Action:
None.
Reason:
Informational message. This is a CA L-SERV return code.
Action:
None.
Reason:
Informational message. This is a CA L-SERV return code.
Action:
None.
Reason:
Informational message. This is a CA L-SERV return code.
Action:
None.
Reason:
Informational message. This is a CA L-SERV return code.
Action:
None.
Reason:
Informational message. This is a CA L-SERV return code.
Action:
None.
Reason:
Informational message. This is a CA L-Serv return code.
Action:
None.
Reason:
Informational message. This is a CA L-Serv return code.
Action:
None.
Reason:
Informational message. This is a CA L-Serv return code.
Action:
None.
Reason:
A journal error has been detected when processing the named request in the named routine in the named program.
Action:
This message is preceded by other messages. Correct the problems identified in these other messages.
|
Copyright © 2014 CA.
All rights reserved.
|
|