The operator ABEND command was issued to request the abnormal termination of the SCS address space.
System Action: The SCS address space terminates abnormally.
User Action: None
An error occurred in the recovery services component of the SCS address space.
The following reason code identifies either an internal recoverable error or an external error code:
An attempt was made to replace or delete the top of stack element in the FRR LIFO stack. However, the stack is empty.
System Action: The SCS task terminates abnormally.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An attempt to query the linkage stack level using the IEALSQRY macro interface failed. GPR 2, at the time of error, contains the return code from the IEALSQRY macro interface.
System Action: The SCS task terminates abnormally.
User Action: Determine the cause of the IEALSQRY macro failure and correct it. Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An attempt to abnormally terminate the current task using the CALLRTM macro interface failed. GPR 2, at the time of, error contains the return code from the CALLRTM macro interface.
System Action: The SCS task terminates abnormally.
User Action: Determine the cause of the CALLRTM macro failure and correct it. Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
For all other reason codes, search problem reporting data bases for a fix for the problem, if unable to resolve the problem, save and report this message to CA Support.
An error occurred in the subtask management component of the SCS address space.
The following reason codes identify either an internal recoverable error or an external error code:
An attempt to create a subtask using the ATTACHX macro interface failed. GPR 2, at the time of error, contains the return code from the ATTACHX macro interface.
System Action: The SCS task terminates abnormally.
User Action: Determine the cause of the ATTACHX macro failure and correct it. Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
A subtask has ended unexpectedly. The subtask is not restartable but is required for the operation of the SCS address space.
System Action: The SCS address space terminates abnormally.
User Action: Review the JES message log and SCS message log for other messages describing the subtask failure.
An internal error occurred in the SCS task service routine, MSMCJATT. A request to establish a task with an associated jobstep control block was made, however, the caller did not provide a JSCB address.
System Action: The SCS address space terminates abnormally.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
For all other reason codes, search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An error occurred in one of the Language Environment interface functions of the SCS address space.
The following reason code identifies either an internal recoverable error or an external error code:
An attempt to wait for a thread to end using the BPX1PTJ (pthread_join) callable service failed.
System Action: The SCS task terminates abnormally.
User Action: Determine the cause of the BPX1PTJ callable service failure and correct it. Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
For all other reason codes, search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An error occurred in the program management component of the SCS address space.
The following reason code identifies either an internal recoverable error or an external error code:
An attempt to obtain the attributes of a loaded module using the CSVQUERY macro interface failed. GPR 2, at the time of error, contains the return code from the CSVQUERY macro interface.
System Action: The SCS task terminates abnormally.
User Action: Determine the cause of the CSVQUERY macro failure and correct it. Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An attempt to dynamically add a module to common storage using the CSVDYLPA macro interface failed. GPRs 2 and 3 at the time of error contain the return code and reason code, respectively, from the CSVDYLPA macro interface.
System Action: The SCS task terminates abnormally.
User Action: Determine the cause of the CSVDYLPA macro failure and correct it. Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
For all other reason codes, search problem reporting data bases for a fix for the problem and. If unable to resolve the problem, save and report this message to CA Support.
An error occurred in the job step task of the SCS address space.
The following reason codes identify either an internal recoverable error or an external error code:
An attempt to establish an ESTAE-type recovery environment using the ESTAEX macro interface failed. GPRs 2 and 3 at the time of error contain the return code and reason code, respectively, from the ESTAEX macro interface.
System Action: The SCS address space terminates abnormally.
User Action: Determine the cause of the ESTAEX macro failure and correct it. Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An attempt to set the default USS dub setting for subtasks using the BPX1SDD (setdubdefault) callable service failed.
System Action: The SCS address space terminates abnormally.
User Action: Determine the cause of the BPX1SDD callable service failure and correct it. Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
For all other reason codes, search problem reporting data bases for a fix for the problem and. If unable to resolve the problem, save and report this message to CA Support.
An error occurred in the SCS message log component of the SCS address space.
The following reason code identifies either an internal recoverable error or an external error code:
An attempt to obtain the current time of day and date using the TIME macro interface failed. GPR 2 at the time of error contains the return code from the TIME macro interface.
System Action: The SCS task terminates abnormally.
User Action: Determine the cause of the TIME macro failure and correct it. Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
For all other reason codes, search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An error occurred in one of the IPCS GTFTRACE exits of the SCS trace services component.
The following reason code identifies either an internal recoverable error or an external error code:
An attempt to write to the terminal using the IPCS expanded print service failed. GPR 2 at the time of error contains the return code from the IPCS exit services router (ADPLSERV).
System Action: The SCS task terminates abnormally.
User Action: Determine the cause of the IPCS expanded print service failure and correct it. Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An attempt to analyze an error condition and write appropriate error message using the IKJEFF19 callable service (GNRLFAIL/VSAMFAIL) failed. GPR 2 at the time of error contains the return code from the IKJEFF19 callable service.
System Action: The SCS task terminates abnormally.
User Action: Determine the cause of the IKJEFF19 callable service failure and correct it. Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An attempt to create a name/token pair using the IEANTCR callable service failed. GPR 2 at the time of error contains the return code from the IEANTCR callable service.
System Action: The SCS task terminates abnormally.
User Action: Determine the cause of the IEANTCR callable service failure and correct it. Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An attempt to retrieve a name/token pair using the IEANTRT callable service failed. GPR 2 at the time of error contains the return code from the IEANTRT callable service.
System Action: The SCS task terminates abnormally.
User Action: Determine the cause of the IEANTRT callable service failure and correct it. Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
For all other reason codes, search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An error occurred in the SAF interface component of the SCS address space.
The following reason code identifies either an internal recoverable error or an external error code:
The interface to the SAF router was called with an unrecognized SAF request type.
System Action: The SCS task terminates abnormally.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
For all other reason codes, search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An error occurred in the implementation engine component of the SCS address space.
The following reason code identifies either an internal recoverable error or an external error code:
The program library open/close routine was called with an unrecognized program request code.
System Action: The action and service request for which the program library open/close routine was called is aborted and processing continues.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
For all other reason codes, search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An error occurred in the OPS/MVS status interface component of the SCS address space.
The following reason code identifies either an internal recoverable error or an external error code:
The OPS/MVS status interface routine was called with an unrecognized program request code.
System Action: The SCS task terminates abnormally.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
For all other reason codes, search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An internal error occurred in the SCS address space. A reason code identifies more details.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An internal error occurred in the SCS address space. A reason code identifies more details.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An internal error occurred in the SCS auxiliary address create and control routine service routine, MSMCACRE.
The following reason codes identify either an internal recoverable error or an external error code:
No parameter list was passed to MSMCACRE.
The parameter list identifier is not valid.
The parameter list length is not valid.
The parameter list function request code is not valid.
The associated AASE address was not passed in the input parameter list.
The ASCRE CREATE service failed with an unexpected return code and reason code.
No SWB address supplied in the AASE block.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An internal error occurred in the SCS ALET generation service routine, MSMCAALT.
The following reason code identifies either an internal recoverable error or an external error code:
An invalid parameter list was passed to MSMCAALT.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An internal error occurred in the internal service which resolves cross-memory routines in the SCS auxiliary address space.
The following reason codes identify the condition which caused the failure:
An invalid parameter list was passed to MSMCAPDT.
There is a length mismatch in the PDT between the SCS main address space and the SCS auxiliary address space.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An internal error occurred in the internal service which processes request completions in the SCS auxiliary address space.
The following reason codes identify the condition which caused the failure:
An unexpected request code was encountered.
MSMCACMP was called in the wrong environment.
MSMCACMP encountered an unexpected ENQ return code when raising the resource management ENQ.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An internal error occurred in the SCS Work Load Manager services routine, MSMCAWLM.
The following reason codes identify the condition which caused the failure:
No parameter list was passed to MSMCAWLM.
The parameter list identifier is not valid.
The parameter list length is not valid.
The parameter list function request code is not valid.
The associated ETOKEN address was not passed in the input parameter list.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An internal error occurred in the SCS auxiliary address space early initialization routine, MSMCAEAI.
The reason code identifies the condition which caused the failure.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An internal error occurred in the SCS auxiliary address space initialization routine, MSMCAINI.
The reason code identifies the condition which caused the failure.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An internal error occurred in the SCS JSCB service routine, MSMCJJSC.
The following reason codes identify the condition which caused the failure:
No parameter list was passed to MSMCJJSC.
The parameter list identifier is not valid.
The parameter list length is not valid.
The parameter list function request code is not valid.
The JSCBPTR address was not passed in the input parameter list.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An internal error occurred in the SCS SAF service routine, MSMCASAF.
The following reason codes identify the condition which caused the failure:
No parameter list passed in GPR1 by caller
Invalid AXSPL identifier.
Invalid AXSPL length.
Invalid AXSPL function request.
UTOKEN parameter not specified.
Invalid UTOKEN parameter.
ACEE parameter not specified.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An internal error occurred in the SCS auxiliary address space startup routine, MSMCAASC. The reason code identifies the condition which caused the failure.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An internal error occurred in the SCS auxiliary address space WTO message capture routine, MSMCAWTO. The reason code identifies the condition which caused the failure.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An internal error occurred in the SCS auxiliary address create and control routine service routine, MSMCAWBF.
The following reason codes identify the condition which caused the failure:
No parameter list was passed to MSMCAWBF.
The parameter list identifier is not valid.
The parameter list length is not valid.
The parameter list function request code is not valid.
The MSGAREA (WBE) address was not passed on a GETMSG or PUTMSG request in the parameter list.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An internal error occurred in program MSMCJSTO while processing a request to get or release storage.
If the high two bytes of the reason codes are non-zero, they contain program specific information that aids in resolving the problem or they contain a program location code.
Unconditional Storage Obtain failed. A $STORAGE OBTAIN call failed for caller storage, and the request was unconditional.
RLE Storage Obtain failed. Storage Obtain for an RLE block failed.
Storage Release failed. Non-zero code from $STORAGE RELEASE call.
Storage bookend violation. One or more storage bookends were found to be changed when releasing storage. Some process has overlaid this storage.
RLE header corrupted. Possible storage corruption.
Storage RCE not found. A request was made to release storage but it was not found in storage managed by MSMCJSTO.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An internal error occurred in program MSMCSSIO while processing a $SSIO request.
The reason code matches error codes defined the URB control block in macro $SSIO.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An internal error occurred in program MSMCJDYA while processing a dynamic allocation request.
The reason code identifies locations in the program where the error was detected and has no meaning outside of the program.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An error was detected during stack processing in program MSMCJTWA. The error is possibly related to caller of routine.
If the high two bytes of the reason code are non-zero, it contains program specific information that aids in resolving the problem or it contains a program location code.
A request was made to return a stack frame and the address was not found in the stack.
The current Get stack request is too large for the currently defined stack frame.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An internal error occurred in program MSMCSDIM while processing a BACKUP/ROLLBACK/COMMIT function.
The reason code identifies locations in the program where the error was detected and has no meaning outside of the program.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An internal error occurred in program MSMCSVAL while processing a VALIDATE function.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
The scheduler encountered an error that warrants a dump. The scheduler task should continue to run.
An unexpected condition was detected. The XXXX part of the reason code contains a location code to aid in debugging the problem.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An Error was detected while processing a request to schedule work in an SCS Auxiliary Address space.
The ARB passed does not look like an ARB.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An Error was detected while processing requested work in the SCS Auxiliary Address space.
If xxxx is not zero, it contains additional information about a location code within the program generating the code.
The following are the Service Task Parameter List errors:
STPL No function
STPL No container ID Addr
STPL No container ID
STPL No operation ID Addr
STPLNo operation ID
STPL Invalid function
STPL No action ID Addr
STPL No action ID
STPL No Unique Token1 addr
STPL No Unique Token1
STPL No XML Length addr
STPL No XML Length
STPL No XML String addr
STPL No Unique Token2 add
STPL No Unique Token2
Invalid Main SOB
Main SOB Operation mismatch
Invalid Main SCB
Main SCB Container mismatch
Invalid container ID passed
Container missing
Invalid operation ID passed
Operation missing
Service Task Parameter not currently used
SRVI returned wrong SOB
Release SCB failed
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An unexpected condition was encountered while processing a service task.
If xxxx is not zero, it contains additional information about a location code within the program generating the code.
The following are the unexpected conditions encountered while processing:
AREQ GETARB failed
AREQ SELECT failed
AREQ SCHEDULE failed
AREQ RELEASE failed
SRVI SOBREL failed
STCKCONV call error
Invalid FDBK area address
Invalid FDBKE type value
Invalid message severity code
FDBK string buffer overflow
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
An internal error occurred in the SCS $SSEC service routine, MSMCSSEC.
The reason code identifies the condition which caused the failure.
User Action: Search problem reporting data bases for a fix for the problem. If unable to resolve the problem, save and report this message to CA Support.
|
Copyright © 2015 CA Technologies.
All rights reserved.
|
|