このトピックにはコマンドの出力仕様が含まれます。
このコマンドの出力を以下に示します。
Name : val
State : val | val (disabled) if server is disabled
Reason : val (only if state is not up and not empty
User Responsible : val (only if state is not up and not empty
Reboot Required : val (only if flagged for reboot)
HA Role : val
UID : val (only if --extended)
Current Time : val (only if --extended)
Uptime : val (only if --extended)
Boot ID : val (only if --extended)
Management Enabled : val (only if --extended)
Bandwidth Oversubscription Enabled : val (yes/no - only if --extended)
Disk NCQ Enabled : val (yes/no - only if --extended)
Jumbo Frames Mode : val (auto, enabled, or disabled)
Jumbo Frames Status : val (yes/no – only if --extended)
Volume Repair Speed : val KB/sec (only if --extended)
--- IP Information --- (only if maintainer)
Private : val
Public : val
--- Hypervisor Information ---
Hypervisor Name : val
License Key : val (only if maintainer)
License Type : val (only if maintainer)
License Expiration Date: val (only if maintainer)
Supported Virtualization Modes: "val"
--- Network Information --- (only if maintainer and --extended)
Network HA Mode NIC Switch State MAC
----------------------------------------------------------------------------
backbone none| ethN <switch-id> up|down|active xx:xx:xx:xx:xx:xx
active-passive| ethN <switch-id> up|down|active xx:xx:xx:xx:xx:xx
active-active
…
external none| ethN <switch-id> up|down|active xx:xx:xx:xx:xx:xx
active-passive| ethN <switch-id> up|down|active xx:xx:xx:xx:xx:xx
active-active …
-- Switch Information --- (only if maintainer and --extended)
ID Name Detection Method
---------------------------------------------------
<id> <name> <val>
…
-- BIOS Information --- (only if --extended)
Vendor : val
Version : val
Date : val
-- Motherboard Information --- (only if --extended)
Manufacturer : val
Model : val
Version : val
--- CPU Information ---
Type : val
Frequency : val
Bogomips : val
Load : val
Hyperthreading : on|off
--- Disk Check Information ---
Supported : val (displayed only if --extended is specified)
Enabled : val (displayed only if --extended is specified)
--- Resource Information ---
Resource Count Total Reserved Alloc Service Free
--------------------------------------------------------------------------------
CPU val val val val - val
MEM - val unit val unit val unit val unit val unit
BW - val unit val unit val unit - val unit
DISK val val unit val unit val unit - val unit
If --map is specified, a list of application components running on the server is displayed with the following information specified for each component:
--- Components ---
(Table with the following headings: Name, State, CPU, Memory(MB), Bandwidth(Mbps)
server <name>
{
state = "val"
down_reason = val (only if state is not up and not empty)
user_responsible = val (only if state is not up and not empty))
enabled = val
reboot_required = val
ha_role = val
uid = "val" (only if --extended)
current_time = val (only if --extended
uptime = val (only if --extended)
boot_id = "val" (only if --extended)
mgmt_enabled = val (only if --extended)
vol_repair_speed = val (only if --extended)
jumbo_frames_mode = val (only if --extended)
jumbo_frames_status = val (only if --extended)
ip1 = xxx.xxx.xxx.xxx (only if maintainer)
ip2 = xxx.xxx.xxx.xxx (only if maintainer)
hypervisor_name = "val"
hypervisor_lic_key = "val" (only if maintainer)
hypervisor_lic_type = "val" (only if maintainer)
hypervisor_lic_exp_date = "val" (only if maintainer)
supported_virt_modes = "val"
network backbone (only if maintainer and --extended)
{
ha_mode = val
nic ethN : switch = <id>, mac = val, state = val
nic ethN : switch = <id>, mac = val, state = val
…
}
network external (only if maintainer and --extended)
{
ha_mode = val
nic ethN : switch = <id>, mac = val, state = val
nic ethN : switch = <id>, mac = val, state = val
…
}
switches
[
<id>=<val>, name=<val>, manufacturer=<val>, model=<val>, detetction_method=<val>
…
]
bios_vendor = "val" (only if --extended)
bios_version = "val" (only if --extended)
bios_date = "val" (only if --extended)
motherboard_manufacturer = "val" (only if --extended)
motherboard_model = "val" (only if --extended)
motherboard_version = "val" (only if --extended)
hvm_support = val
cpu_phy_total = val
cpu_total = val
cpu_type = "val"
cpu_freq = val
cpu_bogomips = val
cpu_load = val
cpu_ht_enabled = val
cpu_reserved = val
cpu_free = val
cpu_alloc = val
mem_total = val
mem_reserved = val
mem_free = val
mem_alloc = val
mem_hypervisor = val
bw_total = val
bw_reserved = val
bw_free = val
bw_alloc = val
bw_oversubscription_enabled = val (only if --extended)
n_disks = val
disk_total = val
disk_reserved = val
disk_free = val
disk_check_supported = val (only displayed if --extended is specified)
disk_check_enabled = val (only displayed if --extended is specified)
disk_ncq_enabled = val (only if --extended)
If --map is specified, the following is displayed for each component/system VM running on the server
component <name>: state = val, cpu = val , mem = val , bw = val
}
|
Copyright © 2013 CA.
All rights reserved.
|
|