Latest Version: 1.3.12-1
The application infrastructure is shown below:
This application works with the MIG appliance to enable applications to migrate and snapshot themselves from grid to grid.
Important! The MigHelper application is provisioned by the MIG appliance and is not intended to be provisioned or configured manually, either by regular users or administrators.
These properties are set by the MIG appliance during application provisioning.
|
Property Name |
Type |
Description |
|
in_ip |
IP |
IP address which provides monitoring services to the web interface of the MIG appliance. This property is mandatory. |
|
out_ip |
IP |
IP address for the external interface used to access grid controllers. This property is mandatory. |
|
netmask |
IP |
Netmask for the network on which in_ip and out_ip reside. Default: 255.255.255.0 |
|
gateway |
IP |
Address of IP gateway used to route traffic. This property must be specified to access grid controllers outside of the IP network on which MigHelper is running (that is, most cases). This property is mandatory. |
|
env |
String |
Reserved for use by MIG and MigHelper. |
|
Resource |
Minimum |
Maximum |
Default |
|
CPU |
0.3 |
0.3 |
0.3 |
|
Memory |
448 MB |
448 MB |
448 MB |
|
Bandwidth |
4 Mbps |
4 Mbps |
4 Mbps |
The application uses one volume. It is part of the application and is already configured into an appliance instance. There are no volumes that need to be configured on the application boundary.
The MigHelper application has the following volume:
|
Volume |
Description |
|
content |
File system containing scripts, logs and web interface. This volume is configured as the data volume of the data NAS appliance. This volume should not be modified by any user. |
Application Architecture
MigHelper has the following components:
|
Copyright © 2013 CA Technologies.
All rights reserved.
|
|