Select task M9C0I006 from the Task Selection Menu.
The following panel appears:
M9C0I006 Modify CP CNTRL File CA ACF2 for z/VM
====>
To ensure correct assemblies of CP modules and correct generation
of your CP nucleus, you must make certain changes to the control
file below. If no control filename appears, you must supply one;
otherwise, you can change it or use the one shown. The modified
CNTRL file will be written out using the updated filename.
Original CP "CNTRL" filename: HCPVM
Updated CP "CNTRL" filename: HCPVM
Remember that for z/VM Version 5 Release 1.0 and above,
HCPVME CNTRL is no longer used. HCPVM is used for the
64-bit version of CP, the only one that can be generated.
Press PF2 to begin CNTRL file modification:
PF1=Help 2=Modify 3=End 4=Return 5= 6=
PF7= 8= 9= 10= 11= 12=
- If you want to change the updated CNTRL filename, enter it on the panel. Be sure to use the same CNTRL filename in task M9C0I017.
Answer the questions with the appropriate value and press PF2 to apply the changes.
The CNTRL file you specified appears:
M9C0EDIT/M9C0I006 HCPVM CNTRL E CA ACF2 for z/VM
‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑
Review and customize your CNTRL file for CP.
(use the DF and DB commands to scroll through these directions)
This control file is used to update and assemble HCPAC0,
as well as for generating your CP nucleus.
In order to assemble HCPAC0 correctly you will need to include
CA ACF2 for z/VM MACLIBs ACF2USER and ACF2VM on a MACS statement.
In order to correctly generate your CP nucleus, you must add the entries
"ACF AUXACF" and "CF630 AUXAV630 TXA" to the CNTRL file you use
to generate the nucleus. Notice that for z/VM Version 6 Release 3.0
there is a complete new set of CP text files with a filetype of TXACF630.
64‑bit HCPVM Example: TEXT MACS (IBM maclibs go here)
TEXT MACS ACF2USER ACF2VM
CF630 AUXAV630 TXA
ACF AUXACF
(IBM auxfiles go here)
DB = Scroll directions backward DF = Scroll directions forward
_______________________________________________________________________________
HCPVM CNTRL E1 F 80 Trunc=80 Size=8 Line=0 Col=1 Alt=0
====>
|...+....1....+....2....+....3....+....4....+....5....+....6....+....7..
* * * Top of File * * * =====
TEXT MACS HCPGPI HCPPSI HCPOM1 HCPOM2 DMSGPI DMSOM OSMACRO =====
TEXT MACS ACF2USER ACF2VM =====
CF630 AUXAV630 TXA =====
ACF AUXACF =====
PAT AUXPAT TX$ * LOCAL PATCHES =====
LCL AUXLCL * CP AUX File and VVTLCL Level for Local Mods =====
TEXT AUXVM * CP AUX FILE and VVTVM Level for PTF service =====
* * * End of File * * * =====
Note: This screen is a sample for Version 6 Release 3.0.
- z/VM Version 5 Release 1.0 is 64-bit only. Because of the difference from the older z/VM releases, there is a full new set of CA ACF2 for z/VM CP text files with file type TXACF510, and a full set of AUXAV510 files. Therefore, use the CF510 AUXAV510 TXA statement in your HCPVM CNTRL file. You do not need the CF510 statement. Although z/VM Version 5 Release 1.0 is 64-bit, HCPVM CNTRL is used (not HCPVME) and TXA is used (not TXE) to select the CA ACF2 for z/VM TXACF510 text files.
- z/VM Version 5 Release 2.0 is 64-bit only. Because of the difference from the older z/VM releases, there is a full new set of CA ACF2 for z/VM CP text files with file type TXACF520, and a full set of AUXAV520 files. Therefore, use the CF520 AUXAV520 TXA statement in your HCPVM CNTRL file. You do not need the CF510 statement. Although z/VM Version 5 Release 2.0 is 64-bit, HCPVM CNTRL is used (not HCPVME) and TXA is used (not TXE) to select the CA ACF2 for z/VM TXACF520 text files.
- z/VM Version 5 Release 3.0 is 64-bit only. Because of the difference from the older z/VM releases, there is a full new set of CA ACF2 for z/VM CP text files with file type TXACF530, and a full set of AUXAV530 files. Therefore, use the CF530 AUXAV530 TXA statement in your HCPVM CNTRL file. You do not need the CF510 statement. Although z/VM Version 5 Release 3.0 is 64-bit, HCPVM CNTRL is used (not HCPVME) and TXA is used (not TXE) to select the CA ACF2 for z/VM TXACF530 text files.
- z/VM Version 5 Release 4.0 is 64-bit only. Because of the difference from the older z/VM releases, there is a full new set of CA ACF2 for z/VM CP text files with file type TXACF540 and a full set of AUXAV540 files. Therefore, use the CF610 AUXAV610 TXA statement in your HCPVM CNTRL file. You do not need the CF510 statement. Although z/VM Version 5 Release 4.0 is 64-bit, HCPVM CNTRL is used (not HCPVME) and TXA is used (not TXE) to select the CA ACF2 for z/VM TXACF540 text files.
- z/VM Version 6 Release 1.0 is 64-bit only. Because of the difference from the older z/VM releases, there is a full new set of CA ACF2 for z/VM CP text files with file type TXACF610, and a full set of AUXAV610 files. Therefore, use the CF610 AUXAV610 TXA statement in your HCPVM CNTRL file. You do not need the CF510 statement. Although z/VM Version 6 Release 1.0 is 64-bit, HCPVM CNTRL is used (not HCPVME) and TXA is used (not TXE) to select the CA ACF2 for z/VM TXACF610 text files.
- z/VM Version 6 Release 2.0 is 64-bit only. Because of the difference from the older z/VM releases, there is a full new set of CA ACF2 for z/VM CP text files with file type TXACF620, and a full set of AUXAV620 files. Therefore, use the CF620 AUXAV620 TXA statement in your HCPVM CNTRL file. You do not need the CF510 statement. Although z/VM Version 6 Release 2.0 is 64-bit, HCPVM CNTRL is used (not HCPVME) and TXA is used (not TXE) to select the CA ACF2 for z/VM TXACF620 text files.
- z/VM Version 6 Release 3.0 is 64-bit only. Because of the difference from the older z/VM releases, there is a full new set of CA ACF2 for z/VM CP text files with file type TXACF630, and a full set of AUXAV630 files. Therefore, use the CF630 AUXAV630 TXA statement in your HCPVM CNTRL file. You do not need the CF510 statement. Although z/VM Version 6 Release 3.0 is 64-bit, HCPVM CNTRL is used (not HCPVME) and TXA is used (not TXE) to select the CA ACF2 for z/VM TXACF630 text files.
- Make the necessary changes to this file as the directions at the top of the panel indicate.
- Type FILE and press Enter to save your changes.
When processing is complete, a message appears on the panel confirming that you modified and saved the CNTRL file:
M9C0I006 Modify CP CNTRL File CA ACF2 for z/VM
===>
HCPVM CNTRL file modified and saved as HCPVM CNTRL on 2A0:
