Reason:
An incorrect keyword parameter was supplied to an internal procedure.
System Action:
The action is rejected.
User Action:
Contact your systems support representative.
Reason:
The ruleset P1 has been successfully loaded.
System Action:
Eventview processes the rules in the ruleset.
User Action:
None.
Reason:
The ruleset P2 was being loaded by EventView. During the processing of included rulesets, it was found that the ruleset P1 was already included. The additional include of the ruleset is ignored.
System Action:
The included ruleset is ignored this time and ruleset loading continues.
User Action:
None.
Reason:
An attempt was made to load a ruleset which had a ruleset status of INACTIVE.
System Action:
The named ruleset is not loaded. If the load was attempted because the ruleset was included in another ruleset, the load of the other ruleset continues.
User Action:
If you want the ruleset loaded, update the ruleset and change status to ACTIVE.
Reason:
An attempt was made to start a ruleset handler for EventView, however the ruleset handler was already running.
System Action:
The new ruleset handler process ends.
User Action:
None.
Reason:
An attempt was made to load or unload the ruleset P1 and error on the registration vartable occured during a P2 action. The feedback code P3 indicates the nature of the error.
System Action:
Processing continues.
User Action:
Determine the cause of the error by examining the ZFDBK code, correct and retry.
Reason:
An attempt was made to unload a ruleset P1 and a GDB error occurred during a P2 action. The feedback code P1 indicates the nature of the error.
System Action:
The load fails.
User Action:
Determine the cause of the error by examining the ZFDBK code, correct and retry.
Reason:
The ruleset P1 has been successfully loaded as a result of being included in another ruleset.
System Action:
EventView processes the rules in the ruleset.
User Action:
None.
Reason:
The ruleset P1 has been unloaded from the running system. This could be caused by the update of ruleset definitions.
System Action:
EventView no longer processes the rules in the ruleset.
User Action:
None.
Reason:
This message is issued in response to a query on EventView for the ruleset P1 which is not currently loaded.
System Action:
None.
User Action:
None.
Reason:
An attempt was made to load a ruleset which is not defined.
System Action:
The named ruleset is not loaded. If the load was attempted because the ruleset was included in another ruleset, the load of the other ruleset continues.
User Action:
Correct the ruleset name.
Reason:
This message is issued when a ruleset is included in another ruleset, but the ruleset has already been loaded by another ruleset. For example, ruleset1 is being loaded, which includes ruleset2, which in turn includes ruleset1 again.
System Action:
The included ruleset is ignored this time and ruleset loading continues.
User Action:
Correct the include ruleset definition.
Reason:
The ruleset control options for the primary loaded ruleset indicate that activity logging should take place. Activity logging has started.
System Action:
The actions performed by EventView are logged.
User Action:
Activity logging increases the cost of running EventView. It is intended for use as a ruleset debugging facility. When the ruleset is running correctly you should turn off activity logging by updating the ruleset control options.
Reason:
The ruleset control options for the primary loaded ruleset have been changed to indicate that activity logging should stop.
System Action:
The actions performed by EventView are no longer logged.
User Action:
None.
Reason:
There is no EventView ruleset active. This is probably because the current system image does not name a ruleset to load.
System Action:
None.
User Action:
None.
Reason:
This message indicates that a rule resulted in the action P3. The rule is indicated by P2 as follows: IACTION-name The named initial action GROUP-name The named message group rule TIMER-name The named timer rule msgid A message with this MSGID If P1 is (TEST) the action was not actually done because the ruleset control option 'Perform Action?' was set to no, or the 'Perform Action in Manual Mode?' field in the AUTOIDS parameter group was set to NO.
This message is part of eventview ruleset activity logging. Ruleset activity logging is controlled by a ruleset control option.
System Action:
None.
User Action:
None.
Reason:
This message indicates that a rule resulted in an EventView variable being set to the value shown in P3. The rule is indicated by P2 as follows:
IACTION-name The named initial action
GROUP-name The named message group rule
TIMER-name The named timer rule
msgid A message with this MSGID
If P1 is (TEST) the action was not actually done because the ruleset control option 'Perform Action?' was set to no, or the 'Perform Action in Manual Mode?' field in the AUTOIDS parameter group was set to NO.
This message is part of eventview ruleset activity logging. Ruleset activity logging is controlled by a ruleset control option.
System Action:
None.
User Action:
None.
Reason:
This message indicates that a rule resulted in the system command P3 being issued. The rule is indicated by P2 as follows:
The named initial action
The named message group rule
The named timer rule
A message with this MSGID
If P1 is (TEST), the action was not actually done because the ruleset control option 'Perform Action?' was set to NO or the 'Perform Action in Manual Mode?' field in the AUTOIDS parameter group was set to NO.
This message is part of EventView ruleset activity logging. Ruleset activity logging is controlled by a ruleset control option.
System Action:
None.
User Action:
None.
Reason:
This message indicates that a rule resulted in the reply command P3 being issued. The rule is indicated by P2 as follows:
IACTION-name The named initial action
GROUP-name The named message group rule
TIMER-name The named timer rule
msgid A message with this MSGID
If P1 is (TEST) the action was not actually done because the ruleset control option 'Perform Action?' was set to no, or the 'Perform Action in Manual Mode?' field in the AUTOIDS parameter group was set to NO.
This message is part of eventview ruleset activity logging. Ruleset activity logging is controlled by a ruleset control option.
System Action:
None.
User Action:
None.
Reason:
This message indicates that a rule resulted in the automation command P3 being issued. The rule is indicated by P2 as follows:
IACTION-name The named initial action
GROUP- name The named message group rule
TIMER-name The named timer rule
msgid A message with this MSGID
If P1 is (TEST) the action was not actually done because the ruleset control option 'Perform Action?' was set to no, or the 'Perform Action in Manual Mode?' field in the AUTOIDS parameter group was set to NO.
This message is part of eventview ruleset activity logging. Ruleset activity logging is controlled by a ruleset control option.
System Action:
None.
User Action:
None.
Reason:
This message indicates that a rule resulted in the message P3 being issued as a WTO. The rule is indicated by P2 as follows:
IACTION-name The named initial action
GROUP- name The named message group rule
TIMER-name The named timer rule
msgid A message with this MSGID
If P1 is (TEST) the action was not actually done because the ruleset control option 'Perform Action?' was set to no, or the 'Perform Action in Manual Mode?' field in the AUTOIDS parameter group was set to NO.
This message is part of eventview ruleset activity logging. Ruleset activity logging is controlled by a ruleset control option.
System Action:
None.
User Action:
None.
Reason:
This message indicates that a rule resulted in the automation process P3 being started. The rule is indicated by P2 as follows:
IACTION-name The named initial action
GROUP- name The named message group rule
TIMER-name The named timer rule
msgid A message with this MSGID
If P1 is (TEST) the action was not actually done because the ruleset control option 'Perform Action?' was set to no, or the 'Perform Action in Manual Mode?' field in the AUTOIDS parameter group was set to NO.
This message is part of eventview ruleset activity logging. Ruleset activity logging is controlled by a ruleset control option.
System Action:
None.
User Action:
None.
Reason:
This message indicates that a rule resulted in the P3 command being issued. The rule is indicated by P2 as follows:
IACTION-name The named initial action
GROUP-name The named message group rule
TIMER-name The named timer rule
msgid A message with this MSGID
If P1 is (TEST), the action was not actually done because the ruleset control option 'Perform Action?' was set to no, or the 'Perform Action in Manual Mode?' field in the AUTOIDS parameter group was set to NO.
This message is part of EventView ruleset activity logging. Ruleset activity logging is controlled by a ruleset control option.
System Action:
None.
User Action:
None.
Reason:
This message indicates that a rule resulted in the message attributes being altered to P3. The rule is indicated by P2 as follows:
IACTION-name The named initial action
GROUP- name The named message group rule
TIMER-name The named timer rule
msgid A message with this MSGID
If P1 is (TEST) the attributes were not actually altered because the ruleset control option 'Perform Message Modification?' was set to no, or the 'Perform Action in Manual Mode?' field in the AUTOIDS parameter group was set to NO.
This message is part of eventview ruleset activity logging. Ruleset activity logging is controlled by a ruleset control option.
System Action:
None.
User Action:
None.
Reason:
This message indicates that a rule resulted in the message text being altered to P3. The rule is indicated by P2 as follows:
IACTION-name The named initial action
GROUP-name The named message group rule
TIMER-name The named timer rule
msgid A message with this MSGID
If P1 is (TEST) the message was not actually altered because the ruleset control option 'Perform Message Modification?' was set to no, or the 'Perform Action in Manual Mode?' field in the AUTOIDS parameter group was set to NO.
This message is part of eventview ruleset activity logging. Ruleset activity logging is controlled by a ruleset control option.
System Action:
None.
User Action:
None.
Reason:
This message indicates that a rule resulted in the message route code being altered to P3. The rule is indicated by P2 as follows:
IACTION-name The named initial action
GROUP-name The named message group rule
TIMER-name The named timer rule
msgid A message with this MSGID
If P1 is (TEST) the route code was not actually altered because the ruleset control option 'Perform Message Modification?' was set to no, or the 'Perform Action in Manual Mode?' field in the AUTOIDS parameter group was set to NO.
This message is part of eventview ruleset activity logging. Ruleset activity logging is controlled by a ruleset control option.
System Action:
None.
User Action:
None.
Reason:
This message indicates that a rule resulted in the message descriptor code being altered to P3. The rule is indicated by P2 as follows:
IACTION-name The named initial action
GROUP-name The named message group rule
TIMER-name The named timer rule
msgid A message with this MSGID
If P1 is (TEST) the descriptor code was not actually altered because the ruleset control option 'Perform Message Modification?' was set to no or the 'Perform Action in Manual Mode?' field in the AUTOIDS parameter group was set to NO.
This message is part of eventview ruleset activity logging. Ruleset activity logging is controlled by a ruleset control option.
System Action:
None.
User Action:
None.
Reason:
The Perform Message Modification? and the Perform Action? EventView ruleset control options were disabled by the following:
- The global operation mode is MANUAL.
- The value in the Perform Action in Manual Mode? field of the AUTOIDS parameter group is NO.
System Action:
None.
User Action:
None.
Reason:
An incorrect keyword parameter was supplied to an internal procedure.
System Action:
The action is rejected.
User Action:
Contact your systems support representative.
Reason:
An attempt was made to load a rule and a GDB error occurred during a P2 action. The feedback code P1 indicates the nature of the error. The key value P3 indicates which record was being actioned.
System Action:
The load fails.
User Action:
Determine the cause of the error by examining the ZFDBK code, correct and retry.
Reason:
Some extended validation characteristics of a rule with id P1 were ignored because they are not supported. The value P3 is not supported for the field P2.
System Action:
Not all validation for the rule is done.
User Action:
Correct the rule definition.
Reason:
An unexpected error occured while a message rule was being loaded. The ID of the vartable is P1 The action which failed is P2 The ZFDBK code is P3
System Action:
The load of this rule fails.
User Action:
Determine the cause of the error by examining the ZFDBK code, correct and retry.
Reason:
The Group rule P1 in ruleset P2 was found to have too many members. The load process ignores the message group rule. The maximum number of members allowed in a group rule is P3.
System Action:
The group rule will not be processed.
User Action:
Correct the rule definitions.
Reason:
An ACTION=DUMP display was requested for a message, but there are no EventView rulesets active.
System Action:
None.
User Action:
None.
Reason:
An ACTION=DUMP display was requested for the message P1 and EventView is searching for rules which might be executed for that message.
System Action:
None.
User Action:
None.
Reason:
An ACTION=DUMP display was requested for a message and EventView has found rules with the test text P1 which match it. Rules with the test text P1 follow. Note: the test text has been truncated at the first wildcard character.
System Action:
None.
User Action:
None.
Reason:
An ACTION=DUMP display was requested for a message and EventView has found P1 rules which match the message.
System Action:
None.
User Action:
None.
Reason:
An ACTION=DUMP display was requested for a message and EventView has found the rule with ID P1 which matches the message. The rule ID is an internal name for the rule. The rank value of the rule id P2, when comparing rules, the lowest rank value is the best.
System Action:
None.
User Action:
None.
Reason:
The rule named in the previous RE3010 message has the validation operations P1 Validation operations tell EventView how to check that a rule is valid for a message.
System Action:
None.
User Action:
None.
Reason:
The rule named in the previous RE3010 message will have its actions performed, even if it is not the best ranked rule.
System Action:
None.
User Action:
None.
Reason:
The rule named in the previous RE3010 message will cause the following modifications to the message.
System Action:
None.
User Action:
None.
Reason:
The rule named in the previous RE3010 message will cause the message replacement: P1
P1 is a string of text operations which tell EventView how to generate the replacement text.
System Action:
None.
User Action:
None.
Reason:
The rule named in the previous RE3010 message has a threshold specified. This message details the threshold.
System Action:
None.
User Action:
None.
Reason:
The rule named in the previous RE3010 message specifies a change in route or descriptor codes.
P1 is the route code to be set (blank if unchanged)
P2 is the descrptor code to be set (blank if unchanged)
System Action:
None.
User Action:
None.
Reason:
The rule named in the previous RE3010 message specifies a change in message attributes.
P1 is the key to the attibute table
P2 is the list of attributes set
System Action:
None.
User Action:
None.
Reason:
The rule named in the previous RE3010 message will cause the following actions to be performed.
System Action:
None.
User Action:
None.
Reason:
The rule named in the previous RE3010 message is a member of a message group rule P1 The group correlator is P2 . The lifetime of a group is
P3. Messages showing other members of the group follow.
System Action:
None.
User Action:
None.
Reason:
The group rule named in the previous RE3019 message contains the rule with test text P1 and an ID of P2.
System Action:
None.
User Action:
None.
Reason:
The group rule named in the previous RE3019 message will cause the following actions to be performed.
System Action:
None.
User Action:
None.
Reason:
The rule being displayed results in a reply command being issued, as described by P1
System Action:
None.
User Action:
None.
Reason:
The rule being displayed results in a command being issued, as described by P1
System Action:
None.
User Action:
None.
Reason:
The rule being displayed results in an EventView variable P1 being set to the value described by P2 The variable is set before other actions for the rule are performed.
System Action:
None.
User Action:
None.
Reason:
The rule being displayed results in an EventView variable P1 being set to the value P2 The variable is set after other actions for the rule are performed.
System Action:
None.
User Action:
None.
Reason:
The rule being displayed results in the P1 command being issued.
System Action:
None.
User Action:
None.
Reason:
The rule being displayed results in the automation process P1 being started.
System Action:
None.
User Action:
None.
Reason:
The rule being displayed results in the automation command P1 being executed.
System Action:
None.
User Action:
None.
Reason:
The rule being displayed results in the WTO message P1 being issued with route code P1 descriptor code P2
System Action:
None.
User Action:
None.
Reason:
A rule results in the P1 reply command being issued. The command will be issued from the region rather than from the subsystem interface.
System Action:
None.
User Action:
None.
Reason:
A rule results in the P1 command being issued. The command will be issued from the region rather than from the subsystem interface.
System Action:
None.
User Action:
None.
Reason:
An incorrect keyword parameter was supplied to an internal procedure.
System Action:
The action is rejected.
User Action:
Contact your systems support representative.
Reason:
Class specified in the calling parameter is unknown to the system.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
An invalid keyword was passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
P1 specified is not known to the system.
System Action:
None.
User Action:
Create Ruleset Control Option before creating rules.
Reason:
P1 process specified has been completed.
System Action:
None.
User Action:
None.
Reason:
Command specified is not recognized by the system.
System Action:
The request is rejected.
User Action:
Specify a valid command.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
Validation found no entry specified on mandatory field/s.
System Action:
The request is rejected.
User Action:
Specify entry on field/s in error.
Reason:
Nothing to be done because P1 was not specified.
System Action:
The request is rejected.
User Action:
Specify P1 name before requesting an action for P1 .
Reason:
Object ID required for processing cannot be created because of missing Ruleset name, class or ruleid in the calling parameters.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
Only the first 10 correlated message rules can be displayed.
System Action:
None.
User Action:
None.
Reason:
The Related Message Group P1 defined for this Message Rule does not exist under ruleset P2.
System Action:
The request is rejected.
User Action:
Create the required Message Group Rule P1 and save/file the Message Rule
Reason:
The vartable identified by P1 has not been allocated.
System Action:
The current process continues.
User Action:
Contact your local support representative.
Reason:
P1 specified is not known to the system.
System Action:
None.
User Action:
Use '?' to select P1
Reason:
The update request is rejected because userid P1 was previously P2 the Message Learning database. P2 will indicate whether the user was deleting or resetting the database.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
Update is in progress on this definition by other user.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
An invalid keyword was passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
Validation found no entry specified on mandatory field/s.
System Action:
The request is rejected.
User Action:
Specify entry on field/s in error.
Reason:
An invalid keyword was passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
No value selected from the selection list displayed.
System Action:
None.
User Action:
None.
Reason:
Message Text is required and no value was entered in that field.
System Action:
The panel is redisplayed with the field(s) in error highlighted.
User Action:
Enter a valid value in the highlighted field(s).
Reason:
Validation routine rejected the value of P1 specified.
System Action:
The panel is redisplayed with the field in error highlighted.
User Action:
Enter a valid value for P1 in the highlighted field.
Reason:
Validation routine rejected the value because no variable name specified
System Action:
The panel is redisplayed with the field in error highlighted.
User Action:
Enter a valid variable name for the value specified.
Reason:
No value selected from the selection list displayed.
System Action:
None.
User Action:
None.
Reason:
P1 specified is not known to the system.
System Action:
None.
User Action:
Use '?' to select P1.
Reason:
There is no use specifying parameter without P1 name to process.
System Action:
None.
User Action:
Specify P1 name or use '?' to select P1.
Reason:
If condition specified then it has to be referenced in the expression and vice versa.
System Action:
Validation failed.
User Action:
Specify condition if referenced in the expression or refer the condition in the expression.
Reason:
P1 must be specified for a valid test condition.
System Action:
None.
User Action:
Enter a valid P1 to create a valid test condition.
Reason:
When a time range specified, the end time must be greater than the start time for a valid duration.
System Action:
None.
User Action:
Enter a valid time duration.
Reason:
The ruleset P1 already defined for EventView.
System Action:
The request is rejected.
User Action:
Specify another valid ruleset name.
Reason:
The first word of the Message Text value is used as the key of the message in the Learnt Message database. Therefore, the first word may not be changed.
System Action:
The panel is redisplayed with the field(s) in error highlighted.
User Action:
Ensure the first word of the Message Text is the same as it was before the field was modified.
Reason:
DBCS data was encountered during validation. DBCS data is not valid in this field.
System Action:
The panel is redisplayed with the field in error highlighted.
User Action:
Enter a non-DBCS value in the highlighted field.
Reason:
This region does not allow you to define a message rule with only a wildcard character.
System Action:
The panel is redisplayed with the field(s) in error highlighted.
User Action:
Define a more specific message rule, or contact your Systems Administrator. Refer to Global Variable $RE$WIRU = NO
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
No rule found to be displayed in the selection list.
System Action:
None.
User Action:
None.
Reason:
Process cancelled because no ruleset was selected.
System Action:
The request is rejected.
User Action:
Ruleset must be selected to add a message rule.
Reason:
The ruleset cannot be deleted because there are rules under this ruleset.
System Action:
The request is rejected.
User Action:
Ruleset must not have any rules for a successful deletion.
Reason:
The ruleset cannot be deleted because it is included by other ruleset/s.
System Action:
The request is rejected.
User Action:
Use Delete Entire to delete this ruleset.
Reason:
The rule cannot be deleted because it is correlated to message rule/s.
System Action:
The request is rejected.
User Action:
Remove all correlation to this rule by updating the message rule/s and retry the delete process.
Reason:
The requested action is rejected because userid P1 was previously P2 the Message Learning database. P2 will indicate whether the user was deleting or resetting the database.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
There are no learnt messages available for display.
System Action:
None.
User Action:
None.
Reason:
The message you have selected by using the GR action code starts with a DBCS character. Message rules cannot be defined for such messages.
System Action:
The action is rejected.
User Action:
None.
Reason:
This message confirms that a request to activate or inactivate an object completed successfully.
System Action:
None.
User Action:
None.
Reason:
A request to activate or inactivate an object failed because the object is already in the state requested. P1 is the object class and P2 is the current state of the object.
System Action:
The request is rejected.
User Action:
Select another object or another action.
Reason:
An invalid keyword was passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
The procedure P1 specified on the EXEC, START or FSPROC command does not exist in the procedure library P2.
System Action:
The command is rejected.
User Action:
Correct the procedure name. If the procedure name is correct ensure that it exists in the procedure library specified for use by this userid. This can be determined by the SHOW EXEC command or alternatively the LIST command could be used to display the procedure without execution.
Reason:
An invalid keyword was passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
P1 specified is not known to the system.
System Action:
None.
User Action:
Use '?' to select P1.
Reason:
An invalid name was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the name required and rerun exec.
Reason:
No value was selected from the displayed list.
System Action:
None.
User Action:
Select a ruleset from the list.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Statistics processing cannot be started because SMF has not been enabled due to one or both of the following:
- To write SMF records, the SMF Record Identification must have a non-zero value. This value is specified in the Customizer SMF parameter group.
- To collect EventView SMF records, specify YES in the Customizer SMFDATA parameter group.
System Action:
The procedure terminates with a RC of 8 and writes an error message to the system log.
User Action:
Contact your system administrator.
Reason:
The vartable identified by P1 does not exist in the current region.
System Action:
The procedure terminates with a RC of 8 and writes an error message to the system log.
User Action:
Contact your Systems Administrator.
Reason:
The vartable identified by P1 cannot be allocated in the current region.
System Action:
The procedure terminates with a RC of 8 and writes an error message to the system log.
User Action:
Contact your Systems Administrator.
Reason:
An invalid keyword was passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
Target ruleset name is not specified in the calling parameter.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
Target ruleset name must be specified for copy process.
System Action:
The request is rejected.
User Action:
Specify the target ruleset name in the highlighted field.
Reason:
Target ruleset name specified already exists in the system.
System Action:
The request is rejected.
User Action:
Specify a new target ruleset name in the highlighted field.
Reason:
Command specified is not recognized by the system.
System Action:
The request is rejected.
User Action:
Specify a valid command.
Reason:
The function P1 being performed on P2 was cancelled at the user's request.
System Action:
None.
User Action:
None.
Reason:
Object ID required for procesing cannot be created because of missing Ruleset name, class or ruleid in the calling parameters.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
Class specified in the calling parameter is unknown to the system.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
Update is in progress on this definition by other user.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
The $RECALL EventView API was called with invalid operands. This could be caused by invalid data (for example, special characters in a ruleset name).
System Action:
The request is rejected.
User Action:
Correct the input data, and retry.
Reason:
A call Syntax Error has been detected while processing a RAMDB Maintenance Request. P1 contains the details of the error.
System Action:
The request is rejected.
User Action:
Correct the API Call request and re-submit.
Reason:
The value presented in P1 exceeds the maximum length allowable for that variable.
System Action:
The request is rejected.
User Action:
Reduce the length of the value to less than or equal to the value indicated by P2.
Reason:
An invalid class has been specified in the request. The valid classes are 93 (Rulesets), 94 (Message Rules), 95 (Message Group Rules) and 98 (Timer Rules).
System Action:
The request is rejected.
User Action:
Specify a valid class value or remove and retry.
Reason:
The value P1 is an invalid value for the field P2.
System Action:
The request is rejected.
User Action:
Correct the value for the field and retry.
Reason:
On a CREATE call a record of type P1 with the name P2 was found on the database and therefore cannot be added.
System Action:
The call is rejected.
User Action:
Choose a different name or delete the existing record.
Reason:
For calls dealing with class 93 (RULESETS) the value for NAME, if supplied, must be the same as the value for RULESET.
System Action:
The call is rejected.
User Action:
Change either the value of the NAME or RULESET keyword and retry.
Reason:
The service P1 was performed successfully.
System Action:
None.
User Action:
None.
Reason:
The RULESET P1 specified in the request does not exist on the database.
System Action:
The call is rejected.
User Action:
Choose a different name or create the required ruleset.
Reason:
The field P1 is required when performing a CREATE for P2 type records.
System Action:
The request is rejected.
User Action:
Supply a value for the field and retry.
Reason:
The length of field P1 exceeds the maximum allowable length, P2, for this field.
System Action:
The request is rejected.
User Action:
Either supply a shorter value for the field or invoke $REDBAPI with TRUNCATE=YES to automatically truncate fields which exceed the maximum length.
Reason:
Issued in response to a SERVICE=LIST request, if no records of class P1 have been listed as a result of the request.
System Action:
None.
User Action:
None.
Reason:
Event Rule Ruleset P1 is not known to the system.
System Action:
None.
User Action:
Use '?' to display and select an existing ruleset.
Reason:
An invalid ruleset name was entered.
System Action:
The request is rejected.
User Action:
Correct the ruleset name and retry the operation.
Reason:
No ruleset was selected from the displayed list.
System Action:
None.
User Action:
Select a ruleset from the list.
Reason:
The database scan required to display the selected Message Learning list was terminated because the number of records returned by the scan would have exceeded the maximum allowed by the system parameters NDB Default Record Limit and/or NDB Maximum Record Limit.
System Action:
The requested database scan terminates and processing returns to the Message Learning menu.
User Action:
Contact your system administrator about increasing the values of the NDB record limits in the system's Initialization Parameters.
Reason:
The Message Learning API procedure was called with keyword P2 set to a value ( P1 ) which the API does not support.
System Action:
The procedure sets a return code of '16' and returns processing to the caller.
User Action:
Check the defined allowed values for the keyword P2 and retry.
Reason:
The requested Message Learning database P1 function completed successfully.
System Action:
None.
User Action:
None.
Reason:
The Message Learning secondary AOMProc's attempted P1 for vartable P2 failed. P3 contains the feedback code returned and P4 contains the Message ID of the record which was being actioned. This message implies that something extraordinary occurred whilst processing the vartable.
System Action:
The message is not processed.
User Action:
Contact Systems Administrator.
Reason:
The Message Learning secondary AOMProc received a message with message ID P2 from the primary AOMProc but there was no corresponding record in vartable P3.
System Action:
The message is not processed.
User Action:
Contact Systems Administrator.
Reason:
The Message Learning secondary AOMProc's attempted P1 failed for the GDB record whose message ID is P2. P3 contains the feedback code returned. This message implies that something extraordinary occurred whilst processing the GDB.
System Action:
The message is not processed.
User Action:
Contact Systems Administrator.
Reason:
The Message Learning secondary AOMProc received a message with message ID P1 from the primary AOMProc but there was no corresponding record in the GDB.
System Action:
The message is not processed.
User Action:
Contact Systems Administrator.
Reason:
The Message Learning secondary AOMProc attempted to process a GDB record but failed because the GDB was found to be corrupted. This is a serious situation and no further messages will be learned which require any GDB processing.
System Action:
Message Learning is stopped - no new messages will be learned but the user interface functions are still available.
User Action:
Contact Systems Administrator.
Reason:
The Message Learning secondary AOMProc's attempted allocation of process vartable P1 failed. P2 contains the feedback code returned.
System Action:
The procedure sets a return code of '8' and ends.
User Action:
Contact Systems Administrator.
Reason:
The Message Learning secondary AOMProc attempted to add a record to the scope=process vartable P1 but failed because a record with that key value (' P2 ') was already in the vartable. This implies that the secondary AOMProc has received a duplicate event, that is, an event for a message which has previously been processed.
System Action:
The message is not processed.
User Action:
Contact Systems Administrator.
Reason:
The Message Learning secondary AOMProc was unable to gain a shared lock on the Message Learning database because a P1 action was in progress which modifies the whole database. Message Learning discarded the message it was attempting to add. The secondary AOMProc will wait for up to 2 minutes before discarding a new message.
System Action:
The new message is discarded. The secondary AOMProc issues this message to monitor class users and the log and then continues processing.
User Action:
If this message occurs repeatedly, check for any processes which are holding an exclusive lock against the Message Learning database.
Reason:
The Message Learning secondary AOMProc attempted to add a message but was unable to do so because the Message Learning AOM vartable was not found. This message implies that the Message Learning AOM vartable has been deleted or that &AOMGFLAG 33 has been set 'ON' by something external to Message Learning whilst Message Learning was inactive.
System Action:
Message Learning is stopped - no new messages will be learned but the user interface functions are still available.
User Action:
To restart the learning function, set to 'NO' the value of the 'Learn New Messages?...' field in the active EventView ruleset and save the change. Then reset the same field to 'YES' and again save the change. Message Learning will restart with a larger vartable capacity.
This message is used only to highlight message REML2112 - see the description for message REML2112 for explanation of the relevant error.
System Action:
None.
User Action:
None.
Reason:
This message is used only to highlight message REML2112 - see the description for message REML2112 for explanation of the relevant error.
System Action:
None.
User Action:
None.
Reason:
The Message Learning secondary AOMProc attempted to add a message but was unable to do so because the Message Learning AOM vartable was at its limit.
System Action:
Message Learning is stopped - no new messages will be learned but the user interface functions are still available.
User Action:
To restart the learning function, set to 'NO' the value of the 'Learn New Messages?...' field in the active EventView ruleset and save the change. Then reset the same field to 'YES' and again save the change. Message Learning will restart with a larger vartable capacity.
Reason:
The database scan required to display the selected Message Learning list was terminated because the number of records returned by the scan would have exceeded the maximum allowed by the system parameters NDB Default Record Limit and/or NDB Maximum Record Limit.
System Action:
The requested database scan terminates and processing returns to the Message Learning menu.
User Action:
Contact your system administrator about increasing the values of the NDB record limits in the system's Initialization Parameters.
Reason:
The Message Learning confirmation display utility procedure was called with keyword P2 set to a value ( P1 ) which the procedure does not support.
System Action:
The procedure sets a return code of '8' and returns processing to the caller.
User Action:
Check the defined allowed values for the keyword P2 and retry.
Reason:
When the Message Learning confirmation display utility procedure was called the required keyword P2 was not set.
System Action:
The procedure sets a return code of '16' and returns processing to the caller.
User Action:
Check the defined allowed values for the keyword P1 and retry.
Reason:
The requested action is rejected because a database P1 is already in progress. The P1 was requested at P2 by user P3.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
You entered a command at the command line whilst in the Message Learning database Reset/Delete confirmation window.
System Action:
The request is rejected. The confirmation window is redisplayed with the error message.
User Action:
None.
Reason:
The function P1 being performed on the Message Learning database was cancelled at the user's request.
System Action:
None.
User Action:
None.
Reason:
The Message Learning table loader procedure received a message other than an expected EDS event on its internal queue. This message serves only as a warning. This message is followed by the message received. Subsequent errors will not result in a warning being written to the log.
System Action:
The procedure writes the message to the activity log and continues.
User Action:
Contact Systems Administrator.
Reason:
The Message Learning table loader procedure tried to perform a P1 action on AOM vartable P2 but the action failed. P3 contains the feedback code returned.
System Action:
The procedure writes the message to the activity log and continues.
User Action:
Contact Systems Administrator.
Reason:
The Message Learning table loader procedure tried to allocate AOM vartable P1 but the allocation failed - there are already the maximum allowed number of SCOPE=AOM tables allocated.
System Action:
The procedure writes the message to the activity log and continues.
User Action:
Contact Systems Administrator.
Reason:
The Message Learning table loader procedure tried to allocate AOM vartable P1 but the allocation failed - its allocation would have caused total storage allocated for vartable mirroring to exceed the maximum defined by SYSPARMS AOMMAXTS.
System Action:
The procedure writes the message to the activity log and continues.
User Action:
Contact Systems Administrator.
Reason:
The Message Learning table loader procedure tried to perform a P1 action on P2 but the action failed. P3 contains the feedback code returned and P4 contains the Message ID of the record which was being actioned.
System Action:
The procedure writes the message to the activity log and continues.
User Action:
Contact Systems Administrator.
Reason:
The Message Learning table loader procedure tried to perform a P1 action on vartable P2 but the key value supplied, P3, was too long for the vartable key definition.
System Action:
The procedure writes the message to the activity log and continues.
User Action:
Contact Systems Administrator.
Reason:
The Message Learning table loader procedure tried to perform a P1 action on vartable P2 but the table was not found in the AOM region.
System Action:
The procedure writes the message to the activity log and continues.
User Action:
Contact Systems Administrator.
Reason:
The Message Learning table loader procedure tried to perform a P1 action on vartable P2 but the table has already reached its limit for number of records stored.
System Action:
The procedure writes the message to the activity log and continues.
User Action:
Contact Systems Administrator.
Reason:
The Message Learning table loader procedure tried to perform a P1 action on vartable P2 but the vartable has been disabled due to a previous storage error.
System Action:
The procedure writes the message to the activity log and continues.
User Action:
Contact Systems Administrator.
Reason:
The Message Learning table loader procedure tried to perform a PUT action on the GDB but the GDB has reached its maximum storage limit.
System Action:
The procedure writes the message to the activity log and continues.
User Action:
Contact Systems Administrator.
Reason:
The Message Learning table loader procedure tried to perform a PUT action on the GDB but the GDB has been corrupted.
System Action:
The procedure writes the message to the activity log and continues.
User Action:
Contact Systems Administrator.
Reason:
The Message Learning table loader procedure tried to perform a DELETE action on the GDB but no record was found in the GDB for the specified message ID P1.
System Action:
The procedure writes the message to the activity log and continues.
User Action:
Contact Systems Administrator.
Reason:
An error or unexpected result occurred whilst the Message Learning table loader procedure was processing. This message is written to the activity log and precedes a message which will describe the particular error.
System Action:
The procedure writes the message to the activity log and continues.
User Action:
Contact Systems Administrator.
Reason:
The Message Learning table loader procedure did not receive a response to a PROFILE P1 command, which was issued internally.
System Action:
The procedure writes the message to the activity log and continues.
User Action:
Contact Systems Administrator.
Reason:
The Message Learning table loader procedure tried to perform a P1 action on vartable P2 but a table entry was not found for the key value,
P3, supplied.
System Action:
The procedure writes the message to the activity log and continues.
User Action:
Contact Systems Administrator.
Reason:
The Message Learning table loader procedure ended processing because it received a SHUTDOWN request message on its internal message stack from another part of EventView. This may be because a new ruleset has been activated which requires Message Learning to be turned off.
System Action:
The procedure writes the message to the activity log and terminates.
User Action:
None.
Reason:
The Message Learning table loader procedure has ended processing. P1 contains the value of the return code at the time the procedure ended.
System Action:
The procedure writes the message to the activity log and terminates.
User Action:
None.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
The vartable identified by P1 has not been allocated.
System Action:
The current process terminates.
User Action:
Contact your local support representative.
Reason:
An OPEN request for the file identified by P1 failed with FILERC P2.
System Action:
Processing continues but CATCHUP processing will not be available.
User Action:
Contact you local support representative.
Reason:
The database function P1 failed with RC P2 and message P3.
System Action:
The current process terminates.
User Action:
Contact your local support representative.
Reason:
No records for the record key P2 were found in vartable P1.
System Action:
The Current process is terminated
User Action:
Check to see whether any valid timer rules have been defined for the ruleset and retry the function.
Reason:
The record with key identified by P1 was not deleted from vartable P2.
System Action:
The Current process is terminated
User Action:
Check to see whether any valid timer rules have been defined for the ruleset and retry the function.
Reason:
The function identified by P1 failed for record key P2 on vartable P3.
System Action:
The Current process is terminated.
User Action:
Check to see whether any valid timer rules have been defined for the ruleset and retry the function.
Reason:
The function identified by P1 failed for record key P2 on file P3.
System Action:
The Current process is terminated.
User Action:
Check to see whether any valid timer rules have been defined for the ruleset and retry the function.
Reason:
The timer associated with EventView was not purged.
System Action:
The timer driver procedure may not execute at the correct time for the next timer rule to be actioned.
User Action:
View the log to determine the reason for the timer not being purged. Contact your local support representative.
Reason:
No records were found in the vartable identified by P1. The feedback value is P2.
System Action:
The current process terminates.
User Action:
Check to see whether any valid timer rules have been defined for the ruleset and retry the function.
Reason:
The function identified by P1 failed for ruleset P2 ruleid P3.
System Action:
The current process terminates.
User Action:
View the log to determine the reason for the timer not being set. Contact your local support representative.
Reason:
A get request from the active timer vartables failed because one of the required parameters was omitted from the request.
System Action:
The current process terminates.
User Action:
Correct the request and retry.
Reason:
An attempt to reevaluate EventView timer rules after a time change failed. P1 is the failure reason.
System Action:
Processing continues. Some timers may not be issued when expected.
User Action:
This is an internal error. Contact Technical Support.
Reason:
The EventView timer rule P1 has been impacted by a time change such as a Daylight Saving change, and its execution time has been adjusted.
System Action:
The timer rule is adjusted as follows.
For a forward time change:
For a backward time change:
User Action:
None.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
The user has requested a cancel of the SCRLLIST function. All updates made while in SCRLLIST mode will be lost.
System Action:
Control is returned to the calling procedure. Updates made while in
SCRLLIST mode will not be saved.
User Action:
None.
Reason:
A Repeat of a schedule item entry has been attempted which would cause the maximum number of entries to be exceeded.
System Action:
Action disallowed.
User Action:
None.
Reason:
The vartable identified by P1 has not been allocated. Vartable feedback information is P2.
System Action:
The current process terminates.
User Action:
Contact your local support representative.
Reason:
The function identified by P1 is not supported by the procedure.
System Action:
A message is issued to the user. Processing continues.
User Action:
None.
Reason:
The vartable PUT function failed for the record identified by P1 with vartable feedback P2.
System Action:
A message is issued to the user. Processing continues.
User Action:
Contact you local support representative.
Reason:
The vartable GET function failed for the record identified by P1 with vartable feedback P2.
System Action:
A message is issued to the user. Processing continues.
User Action:
Contact you local support representative.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
One of the fields identified by P1 and P2, must be specified on this screen.
System Action:
Field(s) highlighted in error.
User Action:
Enter a valid value for one of the specified fields.
Reason:
While defining a resource availability map the field identified by P1 was not entered and is a required field.
System Action:
Field highlighted in error.
User Action:
Enter a value for the specified field.
Reason:
A generic value of '*', 'W/D' or 'W/E' was specified, which would cause the maximum number of timers on the panel to be exceeded if it were expanded out.
System Action:
Field(s) highlighted in error.
User Action:
Clear the fields for the entry and press PF10 to invoke the scrollable list. Retype the entry in the scrollable list and press ENTER to resolve the entry.
Reason:
A generic value of '*', 'W/D' or 'W/E' was specified which would cause the maximum number of timers ( P1 ) to be exceeded if it were expanded out to one timer entry for each day covered.
System Action:
Field(s) highlighted in error.
User Action:
Correct the number of timer entries to remain below the limit.
Reason:
The value identified by P1 is not valid for the field identified by P2.
This message may also have a list of valid values for the field appended to the end of it.
System Action:
Field highlighted in error.
User Action:
Enter a valid value for the specified field.
Reason:
Both 'day' and 'date' values have been specified. Only one of these values may be specified, as calculation of the next execution date for a generic date will result in a different day value each time.
System Action:
Both Fields highlighted in error.
User Action:
Specify a value for only one of either 'day' or 'date'.
Reason:
The DAY portion of a date must be a value between 1 and P1.
System Action:
Field(s) highlighted in error.
User Action:
Change day to conform with message.
Reason:
The 'date' value identified by P1 is a date in the past.
System Action:
The 'date' field is highlighted in error.
User Action:
Specify a date value for a date in the future.
Reason:
A combination of DAY, DATE and TIME may only appear once within a timer rule.
System Action:
Fields highlighted in error.
User Action:
Change the DAY, DATE or TIME to make the schedule item unique.
Reason:
The date and time identified by P1 has already passed.
System Action:
The 'date' and 'time' fields are highlighted and an error message is displayed to the user.
User Action:
Reenter new date and/or timer values.
Reason:
This rule does not contain a timer that activates on a specific date. The timers specified currently never expire.
Delete on Expiry? is effective only for timers that activate on specific dates. Other types of timers (for example, timers that activate on a particular day of the week) do not expire.
System Action:
The Delete on Expiry? field is highlighted.
User Action:
If you plan to include a timer that activates on a specific date, add the timer; otherwise, change the value of the Delete on Expiry? field to
NO .
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
The time value for the schedule item does not exist so the calculation routine is unable to perform calculation for the schedule item.
System Action:
The system stops processing for the timer rule.
User Action:
Check the Timer Rule definition in the DB to ensure that valid schedule items exist for the timer rule.
Reason:
Both the day and date values for the schedule item are null. The date calculation routine is unable to perform caluclation for the schedule item.
System Action:
The system stops processing for the timer rule.
User Action:
Check the Timer Rule definition in the DB to ensure that valid schedule items exist for the timer rule.
Reason:
The file transfer schedule P1 is inactive, and the next scheduled start is described by P2 .
System Action:
None.
User Action:
None.
Reason:
The file transfer schedule is inactive and its checkpoint dataset does not contain any entries.
System Action:
None.
User Action:
None.
Reason:
An attempt to access the Schedule Checkpoint dataset failed. The above
Retcode and VSAM error code were generated.
System Action:
The request is rejected.
User Action:
Interpret the error code using the VSAM Programmer Manual.
Reason:
The time interval in the Longest Transfer field cannot be greater than that in the Processing Period field.
System Action:
The Longest Transfer field is highlighted.
User Action:
Either decrease the value in the Longest Transfer field or increase the value in the Processing Period field.
Reason:
You cancelled the updates you made to the file transfer schedule entries on the Schedule Entries List panel.
System Action:
The updates are not retained.
User Action:
None
Reason:
The Repeat action tries to add a file transfer schedule entry. However, the definition already contains the maximum number of entries and cannot accept another entry.
System Action:
The action is disallowed.
User Action:
None
Reason:
The value, P1 , in the Day/Date or Criteria Name field is not valid.
The valid day values are:
MON TUE WED THU FRI SAT SUN
The valid date formats are:
- dd-MMM-yyyy (for example, 31-JAN-1998)
- dd-MMM , indicating a date for any year
- dd , indicating a date for any month and year
To display the list of valid criteria names, enter ? in the field.
System Action:
The field is highlighted.
User Action:
Enter a value in one of the valid forms.
Reason:
The highlighted file transfer schedule entry is the same as another entry.
System Action:
The duplicate is highlighted.
User Action:
Either delete the duplicate, or change the value in its Day/Date or
Criteria Name field or in its Start Time field such that it is no longer a duplicate.
Reason:
The time value, P1 , is not valid. A time value must be of the form
hh.mm , where hh is from 0 through 23 and mm is from 0 through 59.
System Action:
The field in error is highlighted.
User Action:
Enter a valid time value.
Reason:
The Maximum File Size specified must be greater than or equal to the Minimum File size previously specified.
System Action:
The Maximum File Size field is highlighted.
User Action:
Either increase the value in the Maximum File Size field or decrease the value in the Minimum File Size field.
Reason:
Valid values for this field are ID (Transfer Id), SRC (Source), TGT (Target) or CTL (Control). I, S, T, or C are also acceptable.
System Action:
The field in error is highlighted.
User Action:
Enter one of the valid type values.
Reason:
You cancelled the updates you made to the file filter entries on the File Filters List panel.
System Action:
The updates are not retained.
User Action:
None
Reason:
The Repeat action tries to add a file filter entry. However, the definition already contains the maximum number of entries and cannot accept another entry.
System Action:
The action is disallowed.
User Action:
None
Reason:
A CTL filter entry must use a valid dataset name or a DDNAME with no embedded wildcard characters. If DDNAMEs are used it must be in the format DD(ddname) or DDNAME(ddname).
System Action:
Request rejected.
User Action:
Provide a valid dataset name. The dataset name should be in uppercase.
Reason:
Duplicate dataset names not allowed for CTL entries.
System Action:
The action is disallowed.
User Action:
Review the list of filters or check the spelling of the dataset name for this CTL entry.
Reason:
Quotes are not allowed in any of the file filter attribute fields.
System Action:
None.
User Action:
Correct the entry.
Reason:
A CTL filter entry must use a valid dataset name or a DDNAME with no embedded wildcard characters. If DDNAMEs are used it must be in the format DD(ddname) or DDNAME(ddname).
System Action:
Request rejected.
User Action:
Correct the entry.
Reason:
A CTL filter entry must use a valid dataset name or a DDNAME with no embedded wildcard characters. If DDNAMEs are used it must be in the format DD(ddname(member- name)) or DDNAME(ddname(member-name)).
System Action:
Request rejected.
User Action:
Correct the entry.
Reason:
The filter specification is incomplete. The source data, target data, transfer ID, or CTL file must be identified.
System Action:
The field in error is highlighted.
User Action:
Specify a value in the Source Data or Target Data or Transfer ID field.
To remove a filter entry, you must clear all its fields.
Reason:
A required parameter was not available when this procedure was invoked.
System Action:
Procedure is terminated.
User Action:
Check the parameters used to invoke this procedure.
Reason:
An invalid option was used to invoke this procedure.
System Action:
Procedure is terminated.
User Action:
Check the parameters used to invoke this procedure.
Reason:
The specified file name is too large.
System Action:
None.
User Action:
Correct the FILENAME entry in the CTL file. You can use the wildcard characters % to specify a larger file name.
Reason:
The select CTL file has no entries.
System Action:
None.
User Action:
Verify the contents of the file selected.
Reason:
A file filter requires either a filename or a process ID.
System Action:
None.
User Action:
Correct the FILTER entry in the CTL file.
Reason:
A CTL file cannot contain CTL entires.
System Action:
None.
User Action:
Correct the FILTER entry in the CTL file.
Reason:
A file filter TYPE was not supplied or is invalid. Valid values for TYPE are 'TGT', 'SRC' and 'ID'.
System Action:
None.
User Action:
Correct the FILTER entry in the CTL file.
Reason:
A non-numeric value was supplied for MINSIZE/MAXSIZE.
System Action:
None.
User Action:
Correct the FILTER entry in the CTL file.
Reason:
The MAXSIZE value was less than the MINSIZE value.
System Action:
None.
User Action:
Correct the FILTER entry in the CTL file.
Reason:
A negative numeric value was specified in keywords MINSIZE, MAXSIZE, or NUMBER.
System Action:
None.
User Action:
Correct the FILTER entry in the CTL file.
Reason:
A check of the CTL entry was successful.
System Action:
None.
User Action:
None.
Reason:
An error was detected while evaluating a CTL entry.
System Action:
The action is disallowed.
User Action:
Select 'V' or 'CHK' on the CTL entry in error to determine the cause.
Reason:
The expansion of the file filter list exceeds the maximum number of 99 entries.
System Action:
The action is disallowed.
User Action:
Review all file filters and reduce the number of entries to 99.
Reason:
The upper limit for parameter P2 has been exceeded.
System Action:
None.
User Action:
Correct the FILTER entry in the CTL file.
Reason:
Quotes are not allowed in any of the CTL keywords.
System Action:
None.
User Action:
Correct the FILTER entry in the CTL file.
Reason:
The select CTL file has no FILTER entries.
System Action:
None.
User Action:
Verify the contents of the file selected and ensure that at least 1 FILTER statement exists.
Reason:
A value must be entered in field P1 .
System Action:
The field in error is highlighted.
User Action:
Enter a value for the field.
Reason:
The value P2 is not permitted in the P1 field.
System Action:
The P1 field is highlighted.
User Action:
Enter a valid value for the field.
Reason:
The ruleset with the name P1 is not in the database.
System Action:
The field in error is highlighted.
User Action:
Enter ? (question mark) in the highlighted field to list the rulesets in the database and select one.
Reason:
The value in the File Name field contains the * or ? character. These characters are invalid in that field.
System Action:
The field in error is highlighted.
User Action:
Use the following wildcard characters to match file names that contain disallowed characters:
% (percent) matches any string of characters
_ (underscore) matches a single character
Reason:
The value P1 is invalid in the User List field. The field value must be a userid or list of userids separated by commas. Each userid may consist of alphabetic, numeric and national ($, @, #) characters only. Spaces are permitted between values, but are not required.
System Action:
The field in error is highlighted.
User Action:
With the cursor in the field, press F1 to display the Help. Correct the value that is in error.
Reason:
When the Allow Request field is set to NO the Log field cannot be set to FAIL. The 'FAIL' only occurs when Allow Request is set to YES and a request is disallowed by the external security facility.
System Action:
The field in error is highlighted.
User Action:
Correct the value.
Reason:
The low and high remote IP addresses are incorrectly ordered.
System Action:
The field in error is highlighted.
User Action:
Ensure that the value in the Remote IP Address [low] field is less than the value in the Remote IP Address [High] field.
Reason:
The P1 ruleset already exists in the database.
System Action:
The error is highlighted.
User Action:
Specify a name that has not been used for an FTP policy ruleset.
Reason:
The user P2 is currently maintaining the P1 FTP policy ruleset. Only one user can maintain the a ruleset at a time.
System Action:
Your request is rejected.
User Action:
Wait until the other user has finished with the ruleset, then retry.
Reason:
The P1 FTP policy ruleset was successfully loaded in the SSI.
System Action:
None.
User Action:
None.
Reason:
The P1 FTP policy ruleset failed to load.
System Action:
The ruleset is not loaded in the SSI.
User Action:
See the activity log for detailed messages on why the ruleset failed to load. To access the log, enter the $LOG command from any panel.
Reason:
The P1 FTP policy ruleset failed to load because there was not enough space in the configuration area in the SSI.
System Action:
The ruleset is not loaded. Any previously loaded ruleset remains in effect.
User Action:
Reduce the number of rules in the P1 ruleset, and retry. If the problem persists contact Technical Support.
Reason:
The P1 FTP policy ruleset failed to load because there are no rules in the ruleset.
System Action:
The request is denied.
User Action:
Load a policy ruleset that contains rules.
Reason:
A SAF call to your external security subsystem (RACF, ACF2, or Top Secret) was made for READ, UPDATE, or ALTER access to the FTP policy ruleset and rule definitions.
The SAF resource that is checked to determine access to the definitions is a FACILITY class rule named $SOLVE.FTP.CONTROL .
Your user ID was denied the level of access requested. The levels are as follows:
- READ access is required to browse definitions
- UPDATE access is required to update definitions
- ALTER access is required to add, delete and load definitions
SAF security must be defined before you can use the FTP policy functions.
System Action:
The request is denied.
User Action:
Check the activity log for any additional details about this failure. Provide this information to your security administrator.
To set up SAF security for the FTP policy functions, add a FACILITY class rule called $SOLVE.FTP.CONTROL , then provide permissions to the users of the FTP policy functions.
Reason:
If the value of the Allow Request? field is NO, matched FTP requests are disallowed and the SAF Qualifier field serves no purpose.
System Action:
The field in error is highlighted.
User Action:
If FTP requests are to be disallowed based on the matching criteria alone, remove the value in the SAF Qualifier field.
Reason:
The request cannot be processed when the SSI is inactive.
System Action:
None.
User Action:
To perform this action, start the data space manager task first (for example, S SOLVESSI).
Reason:
While creating an FTP policy ruleset, you pressed F6 (Rules) before saving the ruleset definition. Your ruleset has not been created yet.
System Action:
None.
User Action:
Press F4 (Save), then press F6 (Rules).
Reason:
While creating an FTP policy ruleset, you pressed F6 (Rules) before you complete the Name field.
System Action:
None.
User Action:
Create your ruleset, then press F6 (Rules).
Reason:
The P1 FTP policy ruleset failed to load because another load is in progress by the user ID specified in P2 on the region specified in P3 .
System Action:
The request is denied.
User Action:
Contact the specified user or wait and retry to load this ruleset.
Reason:
A SAF call to verify access to the $SOLVE.FTP.CONTROL resource definition has completed. The requested access level was permitted.
System Action:
Processing continues.
User Action:
None.
Reason:
A SAF call to verify access to the $SOLVE.FTP.CONTROL resource definition has failed.
RC displays the return code from the SAF interface (UTIL0039).
SFRC displays the sub-function return code.
SFREAS displays the sub-function reason code.
ENV displays environmental information.
The most common RC and SFRC combinations are:
04 PROGRAM ACTIVATION FAILURE
04 Program not APF-authorized
08 Invalid parameter
0C Missing parameter
10 Parameters inconsistent
08 SAF INTERFACE FAILURE
SAF/RACROUTE RETURN CODES:
04 Requested function was not processed
08 Requested function was processed, but failed
12 ACCESS VERIFICATION FAILURE
RACROUTE REQUEST=VERIFY CODES:
04 No security profile defined
08 Password invalid
0C Password expired
10 New password invalid
14 Group definition is missing
18 Security exit denied access
1C User temporarily revoked
20 Security system not active
24 Access to group is closed
?? others as per specific security system
16 ACCESS AUTHORIZATION FAILURE
RACROUTE REQUEST=AUTH CODES:
04 Resource is not security protected
08 Resource access not allowed
99 NO ENTRY PARAMETERS
System Action:
The user access request is denied.
User Action:
Contact your system administrator. Use the displayed codes and messages to investigate the cause of the error.
You also need the following documentation:
Ensure that:
Reason:
A user has attempted to access the $SOLVE.FTP.CONTROL resource definition. A SAF call was done to check the user's authority level, but failed because the necessary resource is not defined to SAF.
System Action:
All requests, by all users, for any level of access (including READ) to the $SOLVE.FTP.CONTROL resource will be rejected. Requests will only be allowed when the necessary resources and access permissions are defined to SAF.
User Action:
Ask your Security Administrator to define the $SOLVE.FTP.CONTROL resource profile to SAF. Until this is completed, all access requests (even read-only ones) are denied.
Reason:
A user has attempted to access the $SOLVE.FTP.CONTROL resource definitions. A SAF call was done to check the user's authority level. This user does not have the level of access required to perform the function they requested. This message is followed by RF38SEC004, which lists the user ID and requested access.
System Action:
The request is rejected.
User Action:
Ask your security administrator to give this user ID the required level of access to the $SOLVE.FTP.CONTROL FACILITY class rule.
For information about defining $SOLVE.FTP.CONTROL to your external SAF security system (CA ACF2, CA Top Secret, or RACF), see the CA NetMaster File Transfer Management Administration Guide.
Reason:
This message is written to the Activity Log following any SAF check failure messages. It contains the parameters used by the failing SAF RACROUTE REQUEST=VERIFY macro call. These parameters may include:
USRID - the user ID requesting access to $SOLVE.FTP.CONTROL
GRPID - the user ID's SAF default group
CHKENV - the SAF checking environment (APPL|USER|FULL)
ACCTYP - the access type requested (READ|UPDATE|ALTER)
RSNAME - the SAF resource name
RSCLSS - the SAF class
System Action:
None.
User Action:
Use this information, combined with the information in the previous error message, to determine the cause of the error. For more specific information, see the User Action in the previous error message.
Reason:
There are no queued Auto Connects which match the List Names defined in the monitor definition.
System Action:
None.
User Action:
None.
Reason:
The List Name specified by P1 has been successfully deleted by the user specified by P2 .
System Action:
The List Name is deleted from the Auto Connect queue.
User Action:
None.
Reason:
The command is not supported by CONNECT:Direct for P1 .
System Action:
The command is rejected.
User Action:
None
Reason:
The Auto Connect Queue Monitor has issued a heartbeat to the CONNECT:Mailbox STC and has not received a response.
System Action:
None.
User Action:
None.
Reason:
The Auto Connect Queue Monitor has found that the number of queued Auto Connects does not exceed the threshold defined in the monitor definition. P1 is the current count of the Auto Connect Queue. P2 is the time the monitor performed the heartbeat.
System Action:
None.
User Action:
None.
Reason:
The Auto Connect Queue Monitor has found that the number of queued Auto Connects exceeds the threshold defined in the monitor definition. P1 is the current count of the Auto Connect Queue. P2 is the time the monitor performed the heartbeat.
System Action:
The Monitor is set to a degraded state under ResourceView and an alert is sent to the Alert Monitor.
User Action:
Issue the display command to check the Auto Connect Queue.
Reason:
No records were found for this list.
System Action:
None.
User Action:
None.
Reason:
You performed an action that is in conflict with another action.
System Action:
The action that caused the conflict is highlighted.
User Action:
Review your actions, and correct the error.
Reason:
There are no BSC Lines which match the BSC Lines defined in the monitor definition.
System Action:
None.
User Action:
None.
Reason:
The BSC Line specified by P1 has been successfully stopped by the user specified by P2.
System Action:
The BSC Line is closed.
User Action:
None.
Reason:
The BSC Line specified by P1 has been successfully started by the user specified by P2.
System Action:
The BSC Line is started.
User Action:
None.
Reason:
The BSC Line specified by P1 has failed to stop as it was not running at the time the command was issued.
System Action:
None.
User Action:
None.
Reason:
The BSC Line Monitor has automatically restarted line P1 as the monitor field Automatic Restart? is set to YES. The restart has completed successfully.
System Action:
None.
User Action:
None.
Reason:
The BSC Line Monitor has attempted to automatically restart line P1 as the monitor field Automatic Restart? is set to YES. The restart has failed with the error P2.
System Action:
None.
User Action:
Investigate the cause of the failure. Enter CMMSG at the command prompt for additional message help for the error P2.
Reason:
The BSC Line Monitor has issued a heartbeat to the CONNECT:Mailbox STC and has not received a response.
System Action:
None.
User Action:
None.
Reason:
The BSC Line Monitor has found there are no BSC lines in a status of CLOSED. P1 is the current number of BSC Lines. P2 is the time the monitor performed the heartbeat.
System Action:
None.
User Action:
None.
Reason:
The BSC Line Monitor has found P1 BSC Lines and P2 have a status of CLOSED. P3 is the time the monitor performed the heartbeat.
System Action:
The monitor is set to a degraded state under ResourceView and an alert is sent to the Alert Monitor.
User Action:
Issue the display command to check which BSC Lines are in a closed status.
Reason:
The BSC Line Monitor has not found BSC lines that match the BSC lines defined in the monitor. P1 is the time the monitor performed the heartbeat.
System Action:
None.
User Action:
Check the monitor definition as it may be incorrect.
Reason:
THE CONNECT:Direct API procedure was invoked without the required keyword(s) identified by P1.
System Action:
The request is rejected. The interface procedure ends with return code 16.
User Action:
Supply the required keyword parameter(s).
Reason:
THE CONNECT:Direct API procedure was invoked with an invalid value, identified by P1 for the keyword parameter identified by P2
System Action:
The request is rejected. The interface procedure ends with return code 16.
User Action:
Correct the invalid keyword parameter.
Reason:
A command was issued for a CDMGR resource of type P1 , but the command is not supported by a resource of that type.
System Action:
The request is rejected.
User Action:
None
Reason:
The SOLVE-CONNECT:Direct interface was called, but the subsystem which enables the interface is not active.
System Action:
The request is rejected with a return code of 8.
User Action:
Enable the interface using SUBSYS START as per the installation instructions.
Reason:
Service procedure P1 was invoked with an invalid value for the keyword, P2 , of P3 .
System Action:
The request is rejected.
User Action:
Contact your local support representative.
Reason:
A signon attempt to CONNECT:Direct was cancelled at the user's request.
System Action:
Signon is terminated.
User Action:
None.
Reason:
The CONNECT:Direct interface was called, but the R15 response from DMCHLAPI ( P1 ) was not the expected value. The returned and expected values are both shown in hexadecimal format. The expected value ( P2 ) is:
- X'00000014' (decimal 20) for SIGNOFF
- X'00000000' (decimal 0) for all other commands
System Action:
The request is rejected with a return code of 12.
User Action:
This message may be issued when the CONNECT:Direct region is inactive or not functioning normally. Check to see if there are such problems, and resolve them.
If the CONNECT:Direct region is functioning as expected, this message may indicate a problem in the CONNECT:Direct definitions in the this region. Review the $RF CDAPI parameter group, and check that the specified values are correct.
The use of the CONNECT:Direct programming interface, DMCHLAPI, is described in the CONNECT:Direct for MVS Installation and Administration Guide, in the chapter, Using the Programming Interface. Associated return codes are listed in the section, DMCHLAPI Return Codes.
See the above reference for a technical explanation of the return code. If the cause of the problem is not apparent, contact Technical Support.
Reason:
The SOLVE-CONNECT:Direct interface was called with a command (variable), but the command is null (that is, zero length).
System Action:
The request is rejected with a return code of 8.
User Action:
Contact your local support representative.
Reason:
The SOLVE-CONNECT:Direct interface is called with CONNECT:Direct output specifications (OUTSPECS), which default to NNNNNNN. These specifications may be overridden by specifying a 7-character string as the second parameter when the SOLVE- CONNECT:Direct interface is called. A second parameter was specified, but it was neither null nor 7-characters long.
System Action:
The request is rejected with a return code of 8.
User Action:
Contact your local support representative.
Reason:
The CONNECT:Direct interface was called. The subsystem which enables the interface is active, but the CONNECT:Direct API failed to load when the SOLVE region initializes. The load module name is P1 , and R0 and R15 from the LOAD instruction are P2 and P3 respectively.
System Action:
The request is rejected with a return code of 8.
User Action:
Ensure that the module name is correct (DMCHLAPI).
If it is correct, use the R0 and R15 return codes to determine the cause of the error.
A common error is 806, which indicates that the module could not be found in the load library list (that is, the list of libraries in the STEPLIB). Ensure that the CONNECT:Direct load library (for example, $CD.V2101.LINKLIB) is included in either the STEPLIB or the system link list.
Notes: - All libraries included in the STEPLIB must be APF authorized.
- If the STEPLIB is changed, you must restart this region.
- The CONNECT:Direct API program, DMCHLAPI, may require other load modules which are usually present in the same CONNECT:Direct load library.
- The API program is loaded as a result of the SUBSYS DEFINE command when this region initializes. To reload the program, the region must be terminated and restarted.
Reason:
This message displays the result of a CONNECT:Direct command issued through the CONNECT:Direct API
P1 is the trace text.
System Action:
None.
User Action:
Contact Technical Support.
Reason:
THE CONNECT:Direct Command Interface procedure was invoked without the required keyword(s) identified by P1.
System Action:
The request is rejected. The interface procedure ends with return code 16.
User Action:
Supply the required keyword parameter(s). If the missing keyword is either USERID or PASSWORD go to option A.C.P and check the CDAPI parameter group. Ensure that the USERID and PASSWORD are specified and action (F6) the group to cause these values to be set.
Reason:
The CONNECT:Direct command interface procedure was invoked for a CDMGR but was unable to ascertain the values for the NETMAP and MSGFIL datasets. The file names which could not be derived are identified by P1 , while P2 identifies the CONNECT:Direct manager.
The reason for the failure could be because the INQUIRE INITPARMS command issued to CONNECT:Direct was unsuccessful or because the $RFXPRMS exit was not modified to provide the required file names.
Including the file names of the managed CONNECT:Direct region in the $RFXPRMS exit will bypass the need for the command API to issue the INQUIRE INITPARMS command to obtain these file names.
Note: For CONNECT:Direct Version 1.8, the $RFZPRMS exit must be customized because this version of CONNECT:Direct does not support the INQUIRE INITPARMS command.
System Action:
The request is rejected. The interface procedure ends with return code 16.
User Action:
Update the $RFXPRMS exit to include the file names of the NETMAP and MSGFIL datasets for the managed CONNNECT:Direct region.
If the version of CONNECT:Direct is later than V1.8, the file names can be dynamically extracted by the INQUIRE INITPARMS command. In this case, check that the user ID specified in the CDAPI parameter group is defined to CONNECT:Direct and has the necessary authority. Also check that the CMD clist is available in the CONNECT:Direct OPLIST dataset.
Reason:
The CONNECT:Direct Command Interface procedure has not got exclusive control of the CONNECT:Direct API and iswaitig for a previous request to complete. P1 is the NCLID of the command interface.
System Action:
The procedure will wait for 30 seconds at a time to get exclusive control of the CONNECT:Direct API, issuing this message each time until successful.
User Action:
Wait for exclusive control to be gained or flush the procedure.
Reason:
The CONNECT:Direct Command Interface procedure has attempted to perform function P1 against the subsystem P2 and received the unexpected result
P3.
System Action:
The procedure will terminate, the request is rejected.
User Action:
Investigate the cause of the error and rectify.
Reason:
The CONNECT:Direct Command Interface procedure has attempted to use the SUBSYS identified by P1 and received an error indicating that the SUBSYS had abended. A restart of the SUBSYS also abended.
System Action:
The procedure will terminate, the request is rejected.
User Action:
Investigate the cause of the error and rectify.
Reason:
The CONNECT:Direct Command Interface procedure has attempted to perform the function identified by P1 against the DMPRINT dataset and received return code P2 and feedback P3
System Action:
The procedure terminates.
User Action:
Investigate the cause of the error and rectify.
Reason:
This message indicates that the The CONNECT:Direct Command Interface has successfully terminated and returned all responses received from CONNECT:Direct.
System Action:
The procedure terminates.
User Action:
None
Reason:
The CONNECT:Direct Command Interface procedure has attempted to allocate/unallocate the dataset identified by P1 and received return code P2 and feedback P3 with error message P4 .
System Action:
The procedure terminates.
User Action:
Investigate the cause of the error and rectify.
Reason:
The CONNECT:Direct Command Interface procedure issued a command and received a non-zero return code P1 (greater than 4) and message P2 from the CONNECT:Direct API.
System Action:
Any contents of DMPRINT are returned along with this message.
User Action:
None.
Reason:
The CONNECT:Direct Command Interface procedure issued a command and received return code 4 from CONNECT:Direct. The returned message text is in P1.
System Action:
Any contents of DMPRINT are returned along with this message.
User Action:
None.
Reason:
The CONNECT:Direct Command Interface procedure was invoked and found that one of the required DDNAMES, DMPRINT or DMPUBLIB as identified by
P1 has not been allocated.
System Action:
The request is rejected. The interface procedure ends with return code 16.
User Action:
Go to option A.C.P and check the CDAPI parameter group. Ensure that the appropriate file(s) are specified and action (F6) the group to cause the files to be allocated.
Reason:
The CONNECT:Direct Command Interface procedure attempted a signon and failed. P1 is the user ID. If available, P2 is the return code from the CONNECT:Direct Command Interface.
Any additional messages returned by CONNECT:Direct are written to the activity log. These messages are prefixed with the message ID RFCDCMD22.
System Action:
The request fails. Any related error messages are written to the activity log.
User Action:
Determine the cause of the failure. Correct it, and retry.
Following are some possible causes:
Reason:
The CONNECT:Direct Command API work file DDNAME: DMPRINT has been allocated to a temporary file.
System Action:
Processing continues.
User Action:
None.
Reason:
An internal error has occurred.
The CONNECT:Direct Command API work file DDNAME: DMPRINT cannot be allocated. P1 is the error text.
System Action:
The request is rejected. The interface procedure ends with return code 16.
The CONNECT:Direct Command API responses is disabled.
User Action:
Contact Technical Support with the full text of this message.
Reason:
A signon or signoff request to the CONNECT:Direct Command Interface has failed. P2 is a message returned by the interface. P1 is the name of the CDMGR resource. A companion message (RFCDCMD12) is written to the related CDMON transient log.
System Action:
The request fails.
User Action:
Determine the cause of the failure. Correct it, and retry.
Following are some possible causes:
Reason:
A notification has been received from CONNECT:Direct, indicating that a CONNECT:Direct process was successfully submitted.
The process is identified by the process name and number, P1 , and is usually shown as name(number) . If neither of these is supplied in the CONNECT:Direct event, the process is identified as UNKNOWN . However, if part of the information is not supplied, then:
If the... P1 is shown as... name is missing #number# number is missing name(0)
This message may be followed by RFCDEV03, which provides additional identification details.
System Action:
None
User Action:
None
Reason:
A notification has been received from CONNECT:Direct, indicating that a CONNECT:Direct process was submitted but has failed. The completion code, P2 , and the CONNECT:Direct message ID, P3 , are shown.
The process is identified by the process name and number, P1 , and is usually shown as name(number) . If neither of these is supplied in the CONNECT:Direct event, the process is identified as UNKNOWN . However, if only part of the information is not supplied, then:
If the... P1 is shown as... name is missing #number# number is missing name(0)
This message may be followed by RFCDEV03, which provides additional identification details.
System Action:
None
User Action:
This message may indicate that a CONNECT:Direct transmission has failed and that manual intervention is required to restart or resubmit the process. The following may be useful in problem diagnosis:
- CONNECT:Direct completion code and message ID - CONNECT:Direct job output - System log
Reason:
This message provides additional information about a CONNECT:Direct process that was identifed by a previous message that indicates the success or failure of the process.
The process is identified by the process name and number, P1 , and is usually shown as name(number) . If neither of these is supplied in the CONNECT:Direct event, the process is identified as UNKNOWN . However, if only part of the information is not supplied, then:
If the... P1 is shown as... name is missing #number# number is missing name(0)
The message also includes the following:
- CONNECT:Direct user ID, P2 , that submitted the process
- CONNECT:Direct node, P3 , from where the process is submitted
- CONNECT:Direct sending node, P4
- CONNECT:Direct receiving node, P5
System Action:
None
User Action:
None
Reason:
A notification has been received from CONNECT:Direct, indicating that a CONNECT:Direct process has started.
Note: This message is generated only if the CONNECT:Direct region is version 2.2 or higher.
The process is identified by the process name and number, P1 , and is usually shown as name(number) . If neither of these is supplied in the CONNECT:Direct event, the process is identified as UNKNOWN . However, if only part of the information is not supplied, then:
If the... P1 is shown as...
name is missing #number#
number is missing name(0)
This message may be followed by RFCDEV03, which provides additional identification details.
System Action:
None
User Action:
None
Reason:
A notification has been received from CONNECT:Direct, indicating that a COPY step within a CONNECT:Direct process has started.
Note: This message is generated only if the CONNECT:Direct region is version 2.2 or higher.
The process is identified by the process name and number, P1 , and is usually shown as name(number) . If neither of these is supplied in the CONNECT:Direct event, the process is identified as UNKNOWN . However, if only part of the information is not supplied, then:
If the... P1 is shown as...
name is missing #number#
number is missing name(0)
The step name, P2 , is also shown if available.
This message may be followed by RFCDEV03, which provides additional identification details.
System Action:
None
User Action:
None
Reason:
A notification has been received from CONNECT:Direct, indicating that a COPY step within a CONNECT:Direct process has sucessfully completed.
The process is identified by the process name and number, P1 , and is usually shown as name(number) . If neither of these is supplied in the CONNECT:Direct event, the process is identified as UNKNOWN . However, if only part of the information is not supplied, then:
If the... P1 is shown as... name is missing #number# number is missing name(0)
The step name, P2 , is also shown if available.
This message is followed by the following messages which provide additional details:
- RFCDEV08, which provides information about the file sent (if appropriate)
- RFCDEV09, which provides information about the file received (if appropriate)
These messages may be followed by RFCDEV03, which provides additional identification details.
System Action:
None
User Action:
None
Reason:
A notification has been received from CONNECT:Direct, indicating that a COPY step within a CONNECT:Direct process has failed. The completion code, P3 , and the CONNECT:Direct message ID, P4 , are shown.
The process is identified by the process name and number, P1 , and is usually shown as name(number) . If neither of these is supplied in the CONNECT:Direct event, the process is identified as UNKNOWN . However, if only part of the information is not supplied, then:
If the... P1 is shown as... name is missing #number# number is missing name(0)
The step name, P2 , is also shown if available.
This message is followed by the following messages, which provide additional details:
- RFCDEV08, which provides information about the file sent (if appropriate)
- RFCDEV09, which provides information about the file received (if appropriate)
These messages may be followed by RFCDEV03, which provides additional identification details.
System Action:
None
User Action:
This message indicates that a CONNECT:Direct transmission has failed and that manual intervention is required to restart or resubmit the process. The following information is useful in problem diagnosis:
- CONNECT:Direct completion code and message ID
- CONNECT:Direct job output
- System log
Reason:
This message follows message RFCDEV06 or RFCDEV07, following the completion of a COPY step within a process. The message contains information about the sent dataset as follows:
- Dataset name, P1
- Dataset type, P2
- Number of bytes sent successfully, P3
- Number of records sent successfully, P4
- Number of blocks sent successfully, P5
- Number of members sent successfully, P6
System Action:
None
User Action:
None
Reason:
This message follows message RFCDEV06 or RFCDEV07, following the completion of a COPY step within a process. The message contains information about the dataset that was received as follows:
- Dataset name, P1
- Dataset type, P2
- Number of bytes received, P3
- Number of records received, P4
- Number of blocks received, P5
- Number of members received, P6
System Action:
None
User Action:
None
Reason:
A notification has been received from CONNECT:Direct, indicating that a CONNECT:Direct process has moved to a different process queue, P2 , which is one of the following:
- EXEC, where the process will now execute
- HOLD, where the process is held pending release
- TIMER, where the process is waiting for the scheduled time
- WAIT, where the process is waiting for the CONNECT:Direct nodes to make contact
Note: This message is generated only if the CONNECT:Direct region is version 2.2 or higher.
The process is identified by the process name and number, P1 , and is usually shown as name(number) . If neither of these is supplied in the CONNECT:Direct event, the process is identified as UNKNOWN . However, if only part of the information is not supplied, then:
If the... P1 is shown as...
name is missing #number#
number is missing name(0)
This message may be followed by RFCDEV03, which provides additional identification details.
System Action:
None
User Action:
None
Reason:
A notification has been received from CONNECT:Direct, indicating that a CONNECT:Direct process was sucessfully completed.
The process is identified by the process name and number, P1 , and is usually shown as name(number) . If neither of these is supplied in the CONNECT:Direct event, the process is identified as UNKNOWN . However, if only part of the information is not supplied, then:
If the... P1 is shown as...
name is missing #number#
number is missing name(0)
This message may be followed by RFCDEV03, which provides additional identification details.
System Action:
None
User Action:
None
Reason:
A notification has been received from CONNECT:Direct, indicating that a CONNECT:Direct process has terminated due to a failure. The completion code, P2 , and the CONNECT:Direct message ID, P3 , are shown.
The process is identified by the process name and number, P1 , and is usually shown as name(number) . If neither of these is supplied in the CONNECT:Direct event, the process is identified as UNKNOWN . However, if only part of the information is not supplied, then:
If the... P1 is shown as...
name is missing #number#
number is missing name(0)
This message may be followed by RFCDEV03, which provides additional identification details.
System Action:
None
User Action:
This message may indicate that a CONNECT:Direct transmission has failed and that manual intervention is required to restart or resubmit the process. The following information is useful for problem diagnosis:
- CONNECT:Direct completeion code and message ID
- CONNECT:Direct job output
- System log
Reason:
A notification has been received from CONNECT:Direct, indicating that a RUN JOB step within a CONNECT:Direct process has started.
Note: This message is generated only if the CONNECT:Direct region is version 2.2 or higher.
The process is identified by the process name and number, P1 , and is usually shown as name(number) . If neither of these is supplied in the CONNECT:Direct event, the process is identified as UNKNOWN . However, if only part of the information is not supplied, then:
If the... P1 is shown as... name is missing #number# number is missing name(0)
The step name, P2 , is also shown if it is available.
This message may be followed by RFCDEV03, which provides additional identification details.
System Action:
None
User Action:
None
Reason:
A notification has been received from CONNECT:Direct, indicating that a RUN JOB step within a CONNECT:Direct process has sucessfully completed.
The process is identified by the process name and number, P1 , and is usually shown as name(number) . If neither of these is supplied in the CONNECT:Direct event, the process is identified as UNKNOWN . However, if only part of the information is not supplied, then:
If the... P1 is shown as... name is missing #number# number is missing name(0)
The job name and number, P2 , and step name, P3 , are also shown if available.
This message may be followed by RFCDEV03, which provides additional identification details.
System Action:
None
User Action:
None
Reason:
A notification has been received from CONNECT:Direct, indicating that a RUN JOB step within a CONNECT:Direct process has failed. The completion code, P4 , and the CONNECT:Direct message ID, P5 , are shown.
The process is identified by the process name and number, P1 , and is usually shown as name(number) . If neither of these is supplied in the CONNECT:Direct event, the process is identified as UNKNOWN . However, if only part of the information is not supplied, then:
If the... P1 is shown as... name is missing #number# number is missing name(0)
The job name and number, P2 , and step name, P3 , are also shown if available.
This message may be followed by RFCDEV03, which provides additional identification details.
System Action:
None
User Action:
This message indicates that a CONNECT:Direct transmission has failed and that manual intervention is required to restart or resubmit the process. The following information is useful for problem diagnosis:
- CONNECT:Direct completion code and message ID
- CONNECT:Direct job output
- System log
Reason:
A notification has been received from CONNECT:Direct, indicating that a RUN TASK step within a CONNECT:Direct process has started.
Note: This message is generated only if the CONNECT:Direct region is version 2.2 or higher.
The process is identified by the process name and number, P1 , and is usually shown as name(number) . If neither of these is supplied in the CONNECT:Direct event, the process is identified as UNKNOWN . However, if only part of the information is not supplied, then:
If the... P1 is shown as... name is missing #number# number is missing name(0)
The step name, P2 , is also shown if available.
This message may be followed by RFCDEV03, which provides additional identification details.
System Action:
None
User Action:
None
Reason:
A notification has been received from CONNECT:Direct indicating that a RUN TASK step within a CONNECT:Direct process has completed successfully.
The process is identified by the process name and number, P1 , and is usually shown as name(number) . If neither of these is supplied in the CONNECT:Direct event, the process is identified as UNKNOWN . However, if only part of the information is not supplied, then:
If the... P1 is shown as... name is missing #number# number is missing name(0)
The task name, P2 , and step name, P3 , are also shown if available.
This message may be followed by RFCDEV03, which provides additional identification details.
System Action:
None
User Action:
None
Reason:
A notification has been received from CONNECT:Direct, indicating that a RUN TASK step within a CONNECT:Direct process has failed. The completion code, P4 , and the CONNECT:Direct message ID, P5 , are shown.
The process is identified by the process name and number, P1 , and is usually shown as name(number) . If neither of these is supplied in the CONNECT:Direct event, the process is identified as UNKNOWN . However, if only part of the information is not supplied, then:
If the... P1 is shown as... name is missing #number# number is missing name(0)
The task name, P2 , and step name, P3 , are also shown if available.
This message may be followed by RFCDEV03, which provides additional identification details.
System Action:
None
User Action:
This message indicates that a CONNECT:Direct transmission has failed and that manual intervention is required to restart or resubmit the process. The following information is useful for problem diagnosis:
- CONNECT:Direct completion code and message ID
- CONNECT:Direct job output
- System log
Reason:
NetMaster for File Transfer includes a CONNECT:Direct statistics exit that sends CONNECT:Direct events to this region using the program-to-program interface (PPI). This message indicates that the statistics exit was unable to send P1 messages due to PPI errors, such as queue full.
System Action:
None.
User Action:
Check the CONNECT:Direct log for messages that start with RFCX. These messages are written by the statistics exit when it is unable to send events to the PPI.
Help for messages with RFCX-prefixed IDs are available in the NetMaster for File Transfer region. Refer to the specific RFCX message number for an explanation and remedial action.
Reason:
A notification has been received from CONNECT:Direct, indicating that a CONNECT:Direct region has started. The time, P1, and date, P2, when the region was started is shown with the dataset name and member for the CONNECT:Direct initialization parameters.
System Action:
None.
User Action:
None.
Reason:
A notification has been received from CONNECT:Direct, indicating that CONNECT:Direct shutdown has started. The following information is shown:
- Time, P1 , and date, P2 , when shutdown started
- User ID, P3 , and node, P4 , of the requestor
- Type of shutdown requested, P5
- Completion code, P6 , and CONNECT:Direct message ID, P7 , that resulted from the request
System Action:
None
User Action:
None
Reason:
A notification has been received from CONNECT:Direct, indicating the completion of the CONNECT:Direct shutdown. The time, P1 , and date, P2 , when shutdown was complete is shown.
System Action:
None
User Action:
None
Reason:
A notification has been received from CONNECT:Direct, indicating that a CONNECT:Direct log swap has occured. The time, P1 , and date, P2 , when the log swap started is shown along with the log dataset name, P3 .
System Action:
None
User Action:
None
Reason:
A notification has been received from CONNECT:Direct, indicating that a CONNECT:Direct process was flushed. The CONNECT:Direct user ID, P2 , and node, P3 , that caused this event is shown along with the completion code, P4, and CONNECT:Direct message ID, P5 .
The process is identified by the process name and number, P1 , and is usually shown as name(number) . If neither of these is supplied in the CONNECT:Direct event, the process is identified as UNKNOWN . However, if only part of the information is not supplied, then:
If the... P1 is shown as... name is missing #number# number is missing name(0)
System Action:
None
User Action:
This message indicates that a CONNECT:Direct transmission has not completed and that manual intervention may be required to restart or resubmit the process. The following information is useful for problem diagnosis:
- CONNECT:Direct completion code and message ID - CONNECT:Direct job output - System log
Reason:
A notification has been received from CONNECT:Direct, indicating that a CONNECT:Direct process was suspended. The CONNECT:Direct user ID, P2 , and node, P3 , that caused this event is shown along with the completion code, P4 , and CONNECT:Direct message ID, P5 .
The process is identified by the process name and number, P1 , and is usually shown as name(number) . If neither of these is supplied in the CONNECT:Direct event, the process is identified as UNKNOWN . However, if only part of the information is not supplied, then:
If the... P1 is shown as... name is missing #number# number is missing name(0)
System Action:
None
User Action:
This message indicates that a CONNECT:Direct transmission has not completed and that manual intervention may be required to restart or resubmit the process. The following information is useful for problem diagnosis:
- CONNECT:Direct completion code and message ID
- CONNECT:Direct job output
- System log
Reason:
A notification has been received from CONNECT:Direct, indicating that a CONNECT:Direct task was suspended. The CONNECT:Direct user ID, P2 , and node, P3 , that caused this event is shown along with the completion code, P4, and CONNECT:Direct message ID, P5 .
The process is identified by the process name and number, P1 , and is usually shown as name(number) . If neither of these is supplied in the CONNECT:Direct event, the process is identified as UNKNOWN . However, if only part of the information is not supplied, then:
If the... P1 is shown as... name is missing #number# number is missing name(0)
System Action:
None
User Action:
This message indicates that a CONNECT:Direct transmission has not completed and that manual intervention may be required to restart or resubmit the process. The following information is useful for problem diagnosis:
- CONNECT:Direct completion code and message ID
- CONNECT:Direct job output
- System log
Reason:
NetMaster for File Transfer received a CONNECT:Direct "CT" Copy Termination statistic record for which no corresponding START EVENT had been processed. However, there was a START EVENT for the same transfer with a swapped PNODE/SNODE (known CONNECT:Direct problem). Transfer details are rebuilt. P1 is the transfer key of the START EVENT:
Primary Node - (16 Characters)
Process Number - (08 Characters)
Process Name - (08 Characters)
Secondary Node - (16 Characters)
Step Name - (08 Characters)
The rebuilt START EVENT will have its PNODE/SNODE swapped to match the Copy Termination transfer key.
System Action:
The error is corrected, processing continues.
User Action:
None.
Reason:
NetMaster for File Transfer received a CONNECT:Direct "CT" Copy Termination statistic record for which no corresponding START EVENT had been processed. Transfer details are built from the Copy Termination statistic record.
System Action:
Processing continues.
User Action:
None.
Note: No START EVENT would have been raised for this transfer. The transfer start date and time are not available, and are set as the current system time.
Reason:
NetMaster for File Transfer received a CONNECT:Direct "CT" Copy Termination statistic record and was waiting on other related statistic records to complete the END/FAILURE event. These expected CONNECT:Direct statistic records where not received within the expected time. The END/FAILURE event is raised with the available data. P1 is the transfer key of the END/FAILURE event: Primary Node - (16 Characters)
Process Number - (08 Characters)
Process Name - (08 Characters)
Secondary Node - (16 Characters)
Step Name - (08 Characters)
System Action:
The END/FAILURE event is raised. Some of the CONNECT:Direct WO message records may not have been captured. However, the END/FAILURE event key fields are complete.
User Action:
None.
Reason:
NetMaster for File Transfer received a CONNECT:Direct Statistic Exit "ALLOC" record for a process step which is currently active. P1 is the PNODE P2 is the SNODE P3 is the PROCESS NUMBER P4 is the PROCESS NAME P5 is the PROCESS STEP NAME
System Action:
The duplicate record is ignored and processing continues.
User Action:
Contact Technical Support and provide the following diagnostic information:
- Full text of this message - CONNECT:DIRECT message log
Reason:
The CA Netmaster FTM statistics exit NMCDSTEX for CDMGR P1 is not active.
System Action:
CONNECT:Direct File Transfer Manager P1 is waiting for CONNECT:Direct statistic exit message RFCX01 indicating that the exit has started.
User Action:
Check the Resource Monitor P1 CDMGR Extended Display. If the message RFCDEV70 NM STATS EXIT START PENDING is not reset in a short period, one of the following problems may exist:
Check the CONNECT:Direct job log for related errors.
Reason:
The CA NetMaster FTM statistics exit NMCDSTEX for CDMGR P1 is active but has not sent any events.
System Action:
CONNECT:Direct File Transfer Manager P1 is waiting for a notification event from the exit.
User Action:
Check the Resource Monitor P1 CDMGR Extended Display. If the message RFCDEV71 NM STATS EXIT NOTIFICATION PENDING is not reset in a short period, issue a CHK line command against the P1 CDMGR. If the Extended Display message persists, one of the following problems may exist:
SSI STATUS
If the problem cannot be resolved, contact Technical Support.
Reason:
A health check request response from the CA NetMaster FTM statistics exit NMCDSTEX for CDMGR P1 has not been received.
System Action:
CONNECT:Direct File Transfer Manager P1 is waiting for a response from the exit.
User Action:
Check the Resource Monitor P1 CDMGR Extended Display. If the message RFCDEV72 NM STATS EXIT RESPONSE PENDING is not reset in a short period, issue a CHK line command against the P1 CDMGR. If the Extended Display message persists, one of the following problems may exist:
SSI STATUS
If the problem cannot be resolved, contact Technical Support.
Reason:
The CA NetMaster FTM CDMGR P1 is active with CONNECT:Direct Event Receiver disabled.
System Action:
None.
User Action:
This is an informational message only. It informs you that CDMGR P1 is active and that the CONNECT:Direct Event Receiver is disabled.
This is not an issue when CONNECT:Direct transfer events are not required. If this is not the case, you must update Enable CONNECT:Direct Event Receiver in Customizer Parameter Group: CDAPI. Set the CONNECT:Direct Interface to YES and press F6 (Action) to apply the change.
Reason:
CA NetMaster FTM received a CONNECT:Direct Statistic Exit "HEALTH CHECK" response. This is the expected response to a HEALTH CHECK request.
System Action:
None.
User Action:
None.
Reason:
CA NetMaster FTM CONNECT:Direct Statistic Exit trace has been stopped.
System Action:
CONNECT:Direct Statistic Exit trace terminates.
User Action:
None.
Reason:
CA NetMaster FTM CONNECT:Direct Statistic Exit trace has been started.
System Action:
CONNECT:Direct Statistic Exit trace is active. Trace messages RFCX93 are written to the System Log.
User Action:
None.
Reason:
A pending notification or an event record from the CA NetMaster FTM CONNECT:Direct Statistic Exit was received.
System Action:
The processing of CONNECT:Direct file transfer events starts or resumes.
User Action:
This message may be issued during the CONNECT:Direct region startup indicating that the CONNECT:Direct Statistic Exit event flow started.
If this message was issued after recovering from a loss of communication with the CA NetMaster FTM statistics exit NMCDSTEX, some file transfer events may have been lost.
Reason:
The NetMaster for File Transfer CONNECT:Direct event message format procedure has failed because a mandatory operand either was omitted or has a null value. The operand in error, P1, is identified.
System Action:
The procedure terminates.
User Action:
Contact Technical Support.
Reason:
The message displays the bytes SENT/RECEIVED and READ/WRITTEN for a C:D Transfer. The information presented is used to derive the compression percentage value but incomplete or invalid data was detected.
System Action:
Processing continues with the compression percentage set to 'INC.'
User Action:
Contact your local support representative.
Reason:
The NetMaster for File Transfer CONNECT:Direct event message format procedure has failed due to an MDO error. The failure is identified by the following:
- Statement type, ASSIGN
- MDO return code, P1 =&ZMDORC
- MDO feedback code, P2 =&ZDMOFDBK
- Map name, P3 =&ZMDOMAP
- Full map component name, P4 =&ZMDONAME
- Map component tag value, P5 =&ZMDOTAG
- ASN.1 type of the component, P6 =&ZMDOTYPE
System Action:
This message is written to the activity log and is followed by a series of messages (DD9003, DD9004, DD9006, and DD9007), which display the event in dump format. The event is ignored.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message
- Record dump
It is suggested that the information be obtained immediately as follows:
1. Locate the message and dump in the activity log.
2. Use the PRINT START and PRINT END commands to mark the lines. Refer to the activity log help if you do not know how to do this. Ensure that the marked text contains this error message and the entire record dump (that is, up to and including the DD9007 message).
3. Use the PRINT command to print the marked section of the log.
Note: If you use a 3270 terminal emulator and choose to print the diagnostics by using the "cut and paste" procedure, ensure that you include an image where you scroll right to capture the end of this message.
Reason:
The NetMaster for File Transfer CONNECT:Direct event message format procedure has failed because a CONNECT:Direct event record was received but the procedure does not support it. The record type is shown in character, P1 , and hexadecimal, P2 .
System Action:
The procedure terminates.
User Action:
Contact Technical Support.
Reason:
The NetMaster for File Transfer CONNECT:Direct event message format procedure has failed due to a data error in the event received from CONNECT:Direct. The error is identified by the following:
- Line number, P1 , and procedure name, P2 , where the error occured
- Subroutine name, P3 , if applicable
- Error condition raised, P4
- Verb operand that has detected the error, P5 , if applicable
- CONNECT:Direct statistics record type, P6
- Statement text where the error occured, P7
System Action:
This message is written to the activity log and is followed by a series of messages (DD9003, DD9004, DD9006, and DD9007), which display the event in dump format. The event is then ignored.
If file transfer logging is active, it is also written to the file transfer log.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message
- Record dump
It is suggested that the information be obtained immediately as follows:
1. Locate the message and dump in the activity log.
2. Use the PRINT START and PRINT END commands to mark the lines. Refer to the activity log help if you do not know how to do this. Ensure that the marked text contains this error message and the entire record dump (that is, up to and including the DD9007 message).
3. Use the PRINT command to print the marked section of the log.
Note: If you use a 3270 terminal emulator and choose to print the diagnostics by using the "cut and paste" procedure, ensure that you include an image where you scroll right to capture the end of this message.
Reason:
The NetMaster for File Transfer CONNECT:Direct event message format procedure has failed because of an internal system error. P1 is the reason for the failure.
System Action:
The procedure terminates.
User Action:
Contact Technical Support.
Reason:
The NetMaster for File Transfer CONNECT:Direct event message format procedure has detected that there is currently no active event receiver procedure. The event procedure, P1, will be started.
System Action:
The required event receiver procedure is started.
User Action:
None.
Reason:
The NetMaster for File Transfer CONNECT:Direct statistics exit could not process an ALLOCATION event. This may result in the lost of a file transfer START event.
The reason code, P4 , is set as follows:
- 90 indicates that the required TCQE pointer was null.
- 91 indicates that the TCQE could not be validated.
- 92 indicates that the source file information could not be obtained.
- 93 indicates that the target file information could not be obtained.
- 94 indicates that the required TCA pointer was null.
- 95 indicates that the TCA could not be validated.
System Action:
The event is discarded.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message - CONNECT:DIRECT message log
Reason:
The message displays a file transfer event trace record. P1 is the trace ID, and P2 is the trace text.
System Action:
None
User Action:
Contact your local support representative.
Reason:
The NetMaster for File Transfer CONNECT:Direct event message format procedure has encountered a recoverable error. Check previous messages for the cause of the error.
System Action:
Event processing continues. However, some events may have been lost.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message
- Relevant activity log messages
- CONNECT:DIRECT message log
Reason:
The file transfer event receiver procedure was invoked without the required keyword, P1 .
System Action:
The request is rejected. The interface procedure ends with return code 8.
User Action:
Supply the required keywords. If the missing keyword is ID, enter the
/PARMS shortcut and select the file transfer product API parameter group (for example, CDAPI or CMAPI). Check that the Event Receiver ID is specified, then press F6 (Action) to reset the value.
Note: The ID must be the same as the ID specified in the related product exit (for example, NMCDSTEX for CONNECT:Direct or NMCMLGEX for CONNECT:Mailbox).
If the missing keyword is PRD, contact Technical Support.
Reason:
The events receiver failed when it issued an EPS request. The failure is identified by the following:
- Type of EPS request, P1 (for example, CONNECT)
- Return code, P2 (&RETCODE)
- ERROR NUMBER, P3 (&ERRNO)
- Reason, P4 (for example, EPS UNAVAILABLE)
If possible, recovery is attempted as indicated by the next message (see also RFCDEVR08, RFCDEVR09, or RFCDEVR10).
System Action:
The file transfer events receiver attempts recovery.
User Action:
If the message is not followed by a recovery message, it is likely that the error is related to data corruption. In this instance, the event is discarded and processing continues.
If the problem cannot be resolved, contact Technical Support.
Reason:
The file transfer event receiver received an event which it does not recognize, and the event is ignored. The record received has a hexadecimal value of P1 at offset 2.
System Action:
The file transfer event is ignored.
User Action:
Contact Technical Support.
Reason:
The NetMaster for File Transfer event receiver failed due to an MDO error. The failure is identified by the following:
- The statement type, ASSIGN
- The MDO return code, P1 (&ZMDORC)
- The MDO feedback code, P2 (&ZDMOFDBK)
- The map name, P3 (&ZMDOMAP)
- The full map component name, P4 (&ZMDONAME)
- The map component tag value, P5 (&ZMDOTAG)
- The ASN.1 type of the component, P6 (&ZMDOTYPE)
This failure indicates one of the following causes:
- An invalid record has been received.
- There is a mismatch between the ASN.1 map and the record.
System Action:
The procedure terminates.
User Action:
Contact Technical Support.
Reason:
The NetMaster for File Transfer event receiver failed due to an MDO error. It indicates that an invalid record has been received. The failure is identified by the following:
- The statement type, ASSIGN OPT=NAMES PRESENT_IN
- The MDO return code, P1 (&ZMDORC)
- The MDO feedback code, P2 (&ZDMOFDBK)
- The number of component names returned, P3 (&SYS.VARCNT)
The failure occurs because of one of the following causes:
- The return code is non-zero.
- The number of component names is less than 4.
System Action:
The record is ignored.
User Action:
Contact Technical Support.
Reason:
The file transfer event receiver received an event which it identifies as a valid event type. The specific event type ( P1 ), however, is not supported.
This failure indicates one of the following causes:
- An invalid record has been received.
- There is a mismatch between the ASN.1 map and the data.
System Action:
The file transfer event is ignored.
User Action:
Contact Technical Support.
Reason:
The file transfer event receiver procedure is now ready to receive file transfer events via the EPS Services. The associated EPS receiver ID is
P1 .
System Action:
The region is ready for file transfer events processing. If required the product specific events handler will be started when the first event is received (message RFCDEVR07).
User Action:
None.
Reason:
A file transfer event was received from product P1 via the EPS receiver ID P3 . However, the P1 events handler procedure P2 is not currently active. The procedure is started.
System Action:
The P1 events procedure P2 is started.
User Action:
None.
Reason:
This message follows message RFCDEVR01. The recovery is attempted after an EPS request failure (see RFCDEVR01).
System Action:
The system attempts to reconnect to EPS.
User Action:
See message RFCDEVR01 for information about the error causing the retry.
If the problem cannot be resolved, contact Technical Support.
Reason:
This message follows message RFCDEVR01. The required EPS services are currently unavailable. File transfer events monitoring will resume as soon as EPS services are restored.
System Action:
Waiting on EPS to become available.
User Action:
Ensure that an SSI region is currently active with its event processor enabled.
Enter the /PARMS shortcut, and check the SSI parameter group. Ensure that the Sub- System Interface ID field contains the correct ID.
Reason:
This message follows message RFCDEVR01. An unrecoverable error occurred during an EPS request (see message RFCDEVR01). File transfer events monitoring has stopped.
System Action:
The file transfer events receiver is terminated.
User Action:
Contact Technical Support.
Reason:
The file transfer events receiver procedure was invoked with an invalid parameter P1 for keyword(s) P2 .
System Action:
The request is rejected. The interface procedure ends with return code 8.
User Action:
Contact Technical Support.
Reason:
A request to start a file transfer events receiver procedure for EPS Receiver ID P2 was initiated. EPS Receiver ID P2 is currently serviced by procedure ID P1 .
System Action:
Procedure ID P1 will be shared.
User Action:
None.
Reason:
A request to start a file transfer events receiver procedure for the P3 product was initiated. The cleanup process identifies an existing procedure, P1 , which is no longer needed. The P1 procedure is terminated.
System Action:
The P1 procedure is terminated.
User Action:
None.
Reason:
A request to terminate a file transfer events receiver procedure for the P2 product was initiated. The cleanup process identified the P1 procedure as no longer required and terminates the procedure.
System Action:
The P1 procedure is terminated.
User Action:
None.
Reason:
File transfer events processing for the P2 product was disabled.
System Action:
The procedure with ID P1 stopped file transfer events processing for the
P2 file transfer product.
User Action:
None.
Reason:
The message displays a file transfer events receiver trace record.
P1 is the trace ID, and P2 is the trace text.
System Action:
None.
User Action:
Contact Technical Support.
Reason:
The $RFCDFTL procedure was invoked without the required keywords, P1.
System Action:
The request is ignored.
User Action:
Contact Technical Support.
Reason:
An EPS request cannot complete due to an SSI failure. The monitoring of file transfer events has been suspended.
System Action:
The processing of file transfer events is suspended but will resume as soon as the SSI becomes available.
User Action:
Check the activity log for the associated RFCDEVRxx messages. The RFCDEVRxx messages gives the reason for the SSI failure.
Note: If you are viewing the file transfer log, you can jump directly to the relevant section of the activity log by placing the cursor on the RFCDFTL02 message and pressing F4 (ActLog).
If possible, correct the problem and restart the SSI; otherwise, contact Technical Support.
Reason:
The SSI is now operational, and the flow of file transfer events has resumed.
System Action:
The region resumes the processing of file transfer events.
User Action:
None.
Reason:
The C:D EVENTS connection has failed or is not available. The monitoring of CONNECT:Direct events is suspended. There will be an attempt to reestablish the connection.
System Action:
The processing of CONNECT:Direct events is suspended but will resume as soon as the EVENTS connection is reestablished.
User Action:
Check the transient log for the associated RMIPLN0x messages. The messages give the reason for the connection failure. If possible, correct the problem; otherwise, contact Technical Support.
Reason:
The NetMaster Agent C:D events connection is now operational and the processing of CONNECT:Direct events has resumed.
System Action:
The processing of CONNECT:Direct file transfer events is resumed.
User Action:
None.
Reason:
The NetMaster Agent has been terminated, the monitoring of CONNECT:DIRECT events has stopped.
System Action:
The processing of CONNECT:Direct events has been terminated.
User Action:
No action required if the CDMGR was terminated by the user. Otherwise, check the transient log for associated error messages. If possible, correct the problem; otherwise, contact Technical Support.
Reason:
The status of the SSI policy monitor has changed to ACTIVE.
System Action:
None.
User Action:
None.
Reason:
The SSI policy monitoring is currently not active.
System Action:
The status of the SSI policy monitoring will be checked periodically.
User Action:
If you require the SSI policy monitoring, check the activity log for the associated RFSDMONxx message(s). Review the help for these messages.
If possible, correct the problem and restart the SSI region. Otherwise, contact Technical Support.
Reason:
The P2 Customizer Parameter Group is set to NO - P1 events are not processed.
System Action:
The P2 flow is disabled.
User Action:
None.
Reason:
The P2 Customizer Parameter Group is set to YES - P1 events are processed.
System Action:
The P2 Event flow is enabled.
User Action:
None.
Reason:
This message displays a CA NetMaster FTM CONNECT:Direct Statistics exit heartbeat trace record.
System Action
None.
User Action
Contact Technical Support.
Reason:
The CONNECT:Direct (STC/JOB) P1 is not active.
System Action
None.
User Action
Activate the CDMGR resource, if applicable
Reason:
The CONNECT:Direct (STC/JOB) P1 is active:
P2 is the CONNECT:Direct Address Space ID.
P3 is the CONNECT:Direct Start time and date.
System Action:
None.
User Action:
None.
Reason:
The CONNECT:Direct (STC/JOB) P1 is active:
P2 is the CONNECT:Direct Address Space ID.
P3 is the CONNECT:Direct Start time and date.
System Action:
None.
User Action:
None.
Reason:
The CONNECT:Direct (STC/JOB) P1 is active.
P2 is the CONNECT:Direct EXCP count.
System Action:
None.
User Action:
None.
Reason:
The P1 CA NetMaster FTM CONNECT:Direct Statistics exit responded to a poll request.
System Action:
None.
User Action:
None.
Reason:
CDMGR P1 has an entry in $RFXPRMS (the CDMGR Configurable exit). $RFXPRMS is used when CONNECT:Direct is configured with no MCS user ID.
System Action:
Heartbeat to the CA NetMaster FTM CONNECT:Direct Statistics exit is not executed because it requires MCS support.
User Action:
None.
Reason:
An EPS request cannot complete due to an SSI failure. The monitoring of file transfer events is suspended.
System Action:
The processing of file transfer events is suspended but will resume when the SSI is available.
User Action:
Check the activity log for the associated RFCDEVRxx messages. The RFCDEVRxx messages provides the reason for the SSI failure.
Note: If you are viewing the file transfer log, you can jump to the relevant section of the activity log by placing the cursor on the RFCDHBT07 message and pressing F4 (ActLog).
If possible, correct the problem and restart the SSI; otherwise, contact Technical Support.
Reason:
The CONNECT:Direct Statistics Exit heartbeat procedure is called by the process RFCDHCK1.
The missing or invalid parameter is P1.
Process RFCDHCK1 requires the following parameters:
DISPLAY=xxx TIMEOUT=ss
where xxx is YES when the process is specified in the CDMGR template Display and Heartbeat Details.
where xxx is NO when the process is specified in the CDMGR template Status Monitor Message Details (for MSG: RFCX01).
where ss is the heartbeat poll response timeout in seconds. Must be a positive number.
System Action:
The parameter is assigned the following default:
DISPLAY=YES
TIMEOUT=10
The processing continues.
User Action:
Specify or correct the required parameters.
Reason:
The CA NetMaster FTM CDMGR P1 is active with CONNECT:Direct Event Receiver disabled.
System Action:
None.
User Action:
If you want to receive CONNECT:Direct transfer events, update Enable CONNECT:Direct Event Receiver in the Customizer Parameter Group, CDAPI. Set the CONNECT:Direct Interface to YES and press F6 (Action) to apply the change.
Reason:
The P1 CDMGR resource cannot be contacted using the CONNECT:Direct Command Interface. P2 is the error description.
System Action:
Heartbeat to the CONNECT:Direct statistics exit is not executed because it requires the CONNECT:Direct Command Interface.
User Action:
Determine the cause of the failure. Correct it, and retry.
Following are some possible causes:
Reason:
The heartbeat value in the resource definition was less than the minimum global value. The heartbeat value is increased automatically to P1 .
System Action:
The heartbeat value is increased automatically to the minimum value.
User Action:
None.
Reason:
The NetMaster for File Transfer CONNECT:Direct message format procedure has failed because a mandatory operand either was omitted or has a null value. The operand in error, P1 , is identified.
System Action:
The procedure terminates.
User Action:
Contact Technical Support.
Reason:
The NetMaster for File Transfer CONNECT:Direct message format procedure failed due to an MDO error. The failure is identified by the following:
- Statement type, ASSIGN
- MDO return code, P1 (&ZMDORC)
- MDO feedback code, P2 (&ZDMOFDBK)
- Map name, P3 (&ZMDOMAP)
- Full map component name, P4 (&ZMDONAME)
- Map component tag value, P5 (&ZMDOTAG)
- ASN.1 type of the component, P6 (&ZMDOTYPE)
System Action:
This message is written to the activity log and is followed by a series of messages (DD9003, DD9004, DD9006, and DD9007), which display the event in dump format. The event is ignored.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message
- Record dump
It is suggested that the information be obtained immediately as follows:
1. Locate the message and dump in the activity log.
2. Use the PRINT START and PRINT END commands to mark the lines. See the activity log help if you do not know how to do this. Ensure that the marked text contains this error message and the entire record dump (that is, up to and including the DD9007 message).
3. Use the PRINT command to print the marked section of the log.
Note: If you use a 3270 terminal emulator and choose to print the diagnostics by using the "cut and paste" procedure, ensure that you include an image where you scroll right to capture the end of this message.
Reason:
The NetMaster for File Transfer CONNECT:Direct message format procedure failed to open the CONNECT:Direct message file (DMMSGFIL). The file has not been opened previously (by using UDBCTL OPEN). The attempt to open it has failed. The failure reason, P1 , identifies another message that provides additional explanation.
System Action:
The request is rejected.
User Action:
The most likely cause of this error is that the DMMSGFIL dataset was not allocated correctly. Use the SHOW ALLOCATE command to determine if the dataset is allocated, and if not, use the ALLOCATE command to allocate the dataset, ensuring that the DD name is DMMSGFIL.
Reason:
The NetMaster for File Transfer CONNECT:Direct message format procedure failed to open the CONNECT:Direct message file (DMMSGFIL) for processing in NCL. The open has failed and is identified by the:
- Current file ID, P1
- File return code, P2 , which is the value of &FILERC
- System message, P3 , if any (normally only relevant if the return code is 16)
System Action:
The request is rejected.
User Action:
Use the file return code and message to diagnose the problem.
File return codes are listed in the NCL Reference. See the &FILE verb and &FILERC system variable. If a system message is included (MSG=), see the Help for that message to help you resolve the problem.
If the problem cannot be resolved, contact Technical Support.
Reason:
The NetMaster for File Transfer CONNECT:Direct message format procedure failed to read a message record from the CONNECT:Direct message file (DMMSGFIL). The failure is identified by the following:
- Current file ID, P1
- Key of the record, P2 (this is the CONNECT:Direct message ID)
- File return code, P3 , which is the value of &FILERC
- VSAM feedback code, P4 , in hexadecimal format (normally only relevant if the return code is 8)
- System message, P5 , if any (normally only relevant if the return code is 16)
System Action:
The request is rejected.
User Action:
Use the file return code, feedback code, and message to diagnose the problem.
File return codes are listed in the NCL Reference. See the &FILE verb and &FILERC system variable.
If a system message is included (MSG=), see the Help for that message to help you resolve the problem. If the VSAM feedback code is included (FDBK=), use that to refer to your VSAM reference manual and follow the problem diagnosis.
If the problem cannot be resolved, contact Technical Support.
Reason:
The NetMaster for File Transfer CONNECT:Direct message format procedure has failed because the requested message ID, P1 , was not found in the CONNECT:Direct message file (DMMSGFIL).
System Action:
The request is rejected.
User Action:
Reissue the request with a correct message ID.
Reason:
The selection list service procedure $RFCDMSL was called with an option which it does not support.
System Action:
None.
User Action:
Contact your local support representative.
Reason:
Invalid parameters were passed to the $RFCDMSL procedure.
System Action:
The procedure terminates.
User Action:
Contact your local support representative.
Reason:
An attempt to open the VFS database failed with the FILERC, P1 , which can be 0 or 12. If FILERC is 0, the file has been opened but cannot be written to. If FILERC is 12, the user does not have authority to access the database.
System Action:
None
User Action:
Contact your security administrator for assistance.
Reason:
An attempt to save a CONNECT Model with a name P1 failed because a record with this name already exists.
System Action:
The save fails.
User Action:
Choose a different name for the Model or set the 'Replace?' field to YES.
Reason:
An attempt to perform the function P1 with key P3 on the VFS file failed with the Return Code P2 , the Feedback code P4 (if FILERC=8), and message P5 (if FILERC=16).
System Action:
The request is rejected. This message is also logged.
User Action:
Contact your system administrator for assistance.
Reason:
The Model Name P1 was saved to the VFS file.
System Action:
None
User Action:
None
Reason:
No Models have previously been saved for this panel.
System Action:
None
User Action:
None
Reason:
An attempt to retrieve a CONNECT Model with a name P1 failed because a record with this name was not found. This occurs if another system user has deleted the record.
System Action:
Model selection fails.
User Action:
Choose another Model.
Reason:
'CON' command parameters stored in Model Name P1 were loaded into panel fields.
System Action:
None
User Action:
None
Reason:
An attempt was made to issue a CONNECT:Mailbox Manager CON command from a task which does not have access to a terminal window. The CON command is only supported for environments with a terminal window.
System Action:
The request for a CONNECT:Mailbox Auto Connect is rejected.
User Action:
If you want to issue an Auto Connect from an Automation Services process, use the SYSCMD macro to issue the CONNECT:Mailbox $$CONNECT command directly through the system modify (F) command.
Reason:
A CONNECT:Mailbox Manager modify command P1 was issued. However no output was received.
System Action:
The $$CONNECT command may not have been effective. Examine the system log to determine if the command was effective.
User Action:
Contact your local support representative.
Reason:
An attempt was made to issue a CON command for a CONNECT:Mailbox manager P1 . The command can not function unless the manager has ACTIVE status since the command depends on issuing a MODIFY system command for the CONNECT:Mailbox started task.
System Action:
The request is rejected.
User Action:
Activate the CONNECT:Mailbox resource if you want to issue the command.
Reason:
Validation for field P1 has detected one or more characters P2 which are not permitted in this field.
System Action:
The field in error is highlighted.
User Action:
Correct the entry and retry.
Reason:
Validation has detected that a pre-requisite field P2 is blank.
System Action:
The validated field is highlighted.
User Action:
Clear the field P1 or enter data in P2 .
Reason:
Validation for field P1 has detected that a mutually exclusive field
P2 is not blank, or has an incompatible value (e.g. BSC values for Batch Separator for an SNA connect).
System Action:
Field P1 is highlighted.
User Action:
Clear one of the fields or correct the incompatible values.
Reason:
Validation for field P1 has detected that this field is not blank, which it should be if the field P2 has the value P3 .
System Action:
Field P1 is highlighted.
User Action:
Clear P1 or change the value in P2 .
Reason:
Information retained for the user, P1 , to sign on to CDMGR, P2 , has been cleared. The next time the user signs on to this CDMGR, the user will be prompted for user ID and password.
System Action:
None.
User Action:
None.
Reason:
The $RFCMD procedure was invoked with an invalid value, P2 , for the keyword, P1 .
System Action:
The request is rejected.
User Action:
Contact your local support representative.
Reason:
The $RFCMD procedure was invoked with keywords, P1 and P2 , which are either contradictory or mutually exclusive. For example, CDMGR= and NAME= may both have been specified, where only one is required to identify a CONNECT:Direct region.
System Action:
The request is rejected.
User Action:
Contact your local support representative.
Reason:
An attempt was made to issue a CONNECT:Mailbox Manager DIR command from a task which does not have access to a terminal window. The DIR command is only supported for environments with a terminal window.
System Action:
The request for CONNECT:Mailbox directory information is rejected.
User Action:
If you want directory information from an Automation Services process, use the SYSCMD macro to issue the CONNECT:Mailbox $$DIR command directly through the system modify (F) command.
Reason:
A CONNECT:Mailbox Manager DIR command was requested for the Mailbox Details as entered but no batches were found.
System Action:
The request for CONNECT:Mailbox directory information is rejected.
User Action:
Enter another Mailbox ID and/or User Batch ID.
Reason:
An attempt was made to issue a DIR command for a CONNECT:Mailbox manager P1 . The command can not function unless the manager has ACTIVE status since the command depends on issuing a MODIFY system command for the CONNECT:Mailbox started task.
System Action:
The request is rejected.
User Action:
Activate the CONNECT:Mailbox resource if you want to issue the command.
Reason:
One or more requests to change status flags has been actioned. The number of confirmatory CMB167I messages received from CONNECT:Mailbox was P1 . Note that in some cases (e.g. locked batches) the flag will not be changed even though message CMB167I is issued.
System Action:
The Mailbox Batch List is alwaus refreshed after a status flag change.
User Action:
None.
Reason:
A CONNECT:Mailbox Manager DIR command was requested for the Mailbox P2 . When processing output from the $$DIR command, an error condition P1 was encountered. This error occurs if the data from CONNECT:Mailbox has changed format.
System Action:
The request for CONNECT:Mailbox directory information is terminated with batch data collected so far displayed.
User Action:
Contact your local support representative.
Reason:
A CONNECT:Mailbox Manager modify command P1 was issued. However not all of the expected output was received. This could be caused by a timeout whilst waiting for command output.
System Action:
If the command P1 is a $$DIR command, then the directory information collected so far is displayed. If this message is in response to a line command against a batch, the line command may not have been effective.
User Action:
Examine the log and the system log to check the command and the command output. If the problem is a timeout, change the Command Response timeouts which are controlled by the values specified in the Console Specifications (System Command Controls) Customizer Parameters (/PARMS - TUNING - $RM CONSOLES Console Specifications). If the problem occurs after increasing the timeouts, contact Technical Support.
Reason:
The keyword parameter, P1 , was specified with the invalid value, P2 .
System Action:
The request is rejected, and processing terminates.
User Action:
Contact your local support representative.
Reason:
A required keyword parameter was not specified. The keyword was P1 .
System Action:
The request is rejected, and processing terminates.
User Action:
Contact your local support representative.
Reason:
The command, P1 , is not supported by CONNECT:Direct for P2 .
System Action:
Request is rejected.
User Action:
Contact your local support representative.
Reason:
There was no CONNECT:Direct command response text specified for this CHECK request.
System Action:
Request is rejected.
User Action:
Contact your local support representative.
Reason:
A notification has been received from CONNECT:Mailbox, indicating that a batch transfer has started.
P1 indicates the connection type. (A/C) is for AUTO CONNECT and (R/C) is for REMOTE CONNECT.
P2 is the batch transfer ID shown as Batch ID(Batch Number) .
P3 is the User Batch ID.
This message is followed by RFCMEV02, which provides additional connection details.
System Action:
None
User Action:
None
Reason:
A notification has been received from CONNECT:Mailbox, indicating that a batch transfer has started. This message follows message RFCMEV01.
P1 indicates the connection type. (A/C) is for AUTO CONNECT and (R/C) is for REMOTE CONNECT.
P2 is the batch transfer ID shown as Batch ID(Batch Number) .
P3 is the direction of the batch transfer (SENDING TO/RECEIVING FROM).
P4 is either LINE (for Remote Connect BSC) or RMT (for other).
P5 is the BSC Line Name (for Remote Connect BSC) or Remote Name (for other).
P6 is the List Name (AUTO CONNECT only).
System Action:
None
User Action:
None
Reason:
A notification has been received from CONNECT:Mailbox, indicating that a batch transfer successfully completed.
P1 indicates the connection type. (A/C) is for AUTO CONNECT and (R/C) is for REMOTE CONNECT.
P2 is the batch transfer ID shown as Batch ID(Batch Number) .
P3 is the User Batch ID.
This message is followed by RFCMEV04, which provides additional connection and transfer details.
System Action:
None
User Action:
None
Reason:
A notification has been received from CONNECT:Mailbox, indicating that a batch transfer successfully completed. This message follows message RFCMEV03.
P1 indicates the connection type. (A/C) is for AUTO CONNECT and (R/C) is for REMOTE CONNECT.
P2 is the batch transfer ID shown as Batch ID(Batch Number) .
P3 is the direction of the batch transfer (SENT/RECEIVED).
P4 is 1) For AUTO CONNECT: The number of records transmitted. 2) For REMOTE CONNECT: The number of records and bytes transmitted.
P5 is the Remote Name.
P6 is the List Name (AUTO CONNECT only).
System Action:
None
User Action:
None
Reason:
A notification has been received from CONNECT:Mailbox, indicating that a batch transfer has failed.
P1 indicates the connection type. (A/C) is for AUTO CONNECT and (R/C) is for REMOTE CONNECT.
P2 is the batch transfer ID shown as Batch ID(Batch Number) .
P3 is the User Batch ID.
This message is followed by RFCMEV06/08, which provides additional connection and error details
System Action:
None
User Action:
None
Reason:
A notification has been received from CONNECT:Mailbox, indicating that a batch transfer has failed. This message follows message RFCMEV05.
P1 indicates the connection type. (A/C) is for AUTO CONNECT and (R/C) is for REMOTE CONNECT.
P2 is the batch transfer ID shown as Batch ID(Batch Number) .
P3 is the CONNECT FAILURE CODE (enter CMFC at the prompt line to display failure codes and their description).
P4 is the direction of the batch transfer (SENDING TO/RECEIVING FROM).
P5 is the Remote Name.
P6 is the List Name (AUTO CONNECT only).
System Action:
None
User Action:
None
Reason:
NetMaster for File Transfer received a CONNECT:Mailbox batch termination log record for which no corresponding START EVENT had been processed.
System Action:
Processing continues.
User Action:
None.
Reason:
A notification has been received from CONNECT:Mailbox, indicating that a batch transfer has failed. This message follows message RFCMEV06.
P1 indicates the connection type. (A/C) is for AUTO CONNECT and (R/C) is for REMOTE CONNECT.
P2 is the batch transfer ID shown as Batch ID(Batch Number) .
P3 is the CONNECT FAILURE REASON (enter CMFC command at the prompt line to display failure codes and their description).
System Action:
None
User Action:
None
Reason:
The NetMaster for File Transfer CONNECT:Mailbox event handler procedure has failed because of an internal system error. P1 is the reason for the failure.
System Action:
The procedure terminates.
User Action:
Contact Technical Support.
Reason:
The NetMaster for File Transfer CONNECT:Mailbox event handler procedure has encountered a recoverable error. Check previous messages for the cause of the error.
System Action:
Event processing continues. However, some events may have been lost.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message
- Relevant activity log messages
- CONNECT:Mailbox message log
Reason:
The NetMaster for File Transfer CONNECT:Mailbox event handler procedure has failed due to an MDO error. The failure is identified by the following:
- Statement type, ASSIGN
- MDO return code, P1 =&ZMDORC
- MDO feedback code, P2 =&ZDMOFDBK
- Map name, P3 =&ZMDOMAP
- Full map component name, P4 =&ZMDONAME
- Map component tag value, P5 =&ZMDOTAG
- ASN.1 type of the component, P6 =&ZMDOTYPE
System Action:
This message is written to the activity log and is followed by a series of messages (DD9003, DD9004, DD9006, and DD9007), which display the event in dump format. The event is ignored.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message
- Record dump
It is suggested that the information be obtained immediately as follows:
1. Locate the message and dump in the activity log.
2. Use the PRINT START and PRINT END commands to mark the lines. Refer to the activity log help if you do not know how to do this. Ensure that the marked text contains this error message and the entire record dump (that is, up to and including the DD9007 message).
3. Use the PRINT command to print the marked section of the log.
Note: If you use a 3270 terminal emulator and choose to print the diagnostics by using the "cut and paste" procedure, ensure that you include an image where you scroll right to capture the end of this message.
Reason:
The NetMaster for File Transfer CONNECT:Mailbox event handler procedure has failed due to a data error in the event received from CONNECT:Mailbox. The error is identified by the following:
- Line number, P1 , and procedure name, P2 , where the error occurred
- Subroutine name, P3 , if applicable
- Error condition raised, P4
- Verb operand that has detected the error, P5 , if applicable
- CONNECT:Mailbox log record type, P6
- Statement text where the error occurred, P7
System Action:
This message is written to the activity log and is followed by a series of messages (DD9003, DD9004, DD9006, and DD9007), which display the event in dump format. The event is then ignored.
If file transfer logging is active, it is also written to the file transfer log.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message
- Record dump
It is suggested that the information be obtained immediately as follows:
1. Locate the message and dump in the activity log.
2. Use the PRINT START and PRINT END commands to mark the lines. Refer to the activity log help if you do not know how to do this. Ensure that the marked text contains this error message and the entire record dump (that is, up to and including the DD9007 message).
3. Use the PRINT command to print the marked section of the log.
Note: If you use a 3270 terminal emulator and choose to print the diagnostics by using the "cut and paste" procedure, ensure that you include an image where you scroll right to capture the end of this message.
Reason:
The message displays a file transfer event trace record. P1 is the trace ID, and P2 is the trace text.
System Action:
None
User Action:
Contact your local support representative.
Reason:
The heartbeat value in the resource definition was less than the minimum global value. The heartbeat value is increased automatically to P1 .
System Action:
The heartbeat value is increased automatically to the minimum value.
User Action:
None.
Reason:
The NetMaster for File Transfer CONNECT:Mailbox Message Information procedure failed to open the CONNECT:Mailbox ISPF VSAM Administration file. The most likely cause of this error is that the data set was not allocated at region initialization. P1 identifies the DD name for the file.
System Action:
The request for message information is rejected.
User Action:
If you want message information, enter a data set name in the $RF CMAPI parameter group (/PARMS) and press F6 (Action) to action the changes immediately.
Reason:
The NetMaster for File Transfer CONNECT:Mailbox Message Information procedure has failed because the requested item P1 , value P2 was not found in the CONNECT:Mailbox ISPF VSAM Administration file.
System Action:
The request is rejected.
User Action:
Reissue the request with a correct message ID or failure code. If the ID or code is correct, check that the latest messages have been loaded into the CONNECT:Mailbox ISPF VSAM Administration file.
Reason:
The NetMaster for File Transfer CONNECT:Mailbox Message Information procedure failed to read a message record from the CONNECT:Mailbox ISPF VSAM Administration file. The failure is identified by:
- Current file ID, P1
- Key of the record, P2 (bytes 11-18 = CONNECT:Mailbox message ID)
- File return code, P3 , which is the value of &FILERC
- VSAM feedback code, P4 , in hexadecimal format (normally only relevant if the return code is 8)
- System message, P5 , if any (normally only relevant if the return code is 16)
System Action:
The request is rejected.
User Action:
Use the file return code, feedback code, and message to diagnose the problem.
See the NCL Reference manual for details of the &FILE verb and &FILERC system variable.
If a system message is included (MSG=), see the Help for that message to help you resolve the problem. If the VSAM feedback code is included (FDBK=), refer to your VSAM reference manual and follow the problem diagnosis.
If the problem cannot be resolved, contact Technical Support.
Reason:
The region was unable to register for unsolicited messages from a CONNECT:Mailbox started task. P1 is the reason for the failure. Messages from that task will not appear in the file transfer log.
System Action:
None.
User Action:
Contact Technical Support.
Reason:
You performed an action that issue the P1 command but received no response.
System Action:
The request is rejected.
User Action:
Ensure that the CONNECT:Mailbox region is still active. If it is active, other tasks may be degrading the response time and you can retry later.
Reason:
While the CONNECT:Mailbox region is active, you cannot deallocate its VSAM Control File (VCF) or VSAM Pointer File (VPF).
System Action:
The request is rejected.
User Action:
None.
Reason:
You canceled your request to deallocate the selected VSAM batch file from its CONNECT:Mailbox region.
System Action:
The request to deallocate the file is not processed.
User Action:
None.
Reason:
The P1 action has completed.
System Action:
None.
User Action:
None.
Reason:
You exit the VSAM File Statistics panel without completing the assisted file reorganization process for the P1 files.
System Action:
The region removes your exclusive online control of the files.
User Action:
You might need to complete the reorganization manually offline.
Reason:
You tried to allocate a VSAM batch file that has not completed reorganization, and the action is successful. The action forces the completion of the suspended reorganization.
System Action:
The region removes your exclusive online control of the file.
User Action:
None.
Reason:
You allocated a CONNECT:Mailbox VSAM batch file successfully after its reorgnization was suspended after the copy task. The allocation task completes the reorganization process.
System Action:
The region removes your exclusive online control of the file.
User Action:
None.
Reason:
You entered AR beside a CONNECT:Mailbox VSAM batch file, but another user, P1 , is already performing that action on the file and has exclusive online control of that file. No action is possible until that control is released.
System Action:
The request is rejected.
User Action:
None.
Reason:
You entered AR beside a CONNECT:Mailbox VSAM batch file, but the file attributes cannot be accessed. The reason may be:
- The dataset cannot be found.
- The file reorganization has been left in an incomplete state from a previous action.
System Action:
The request is rejected.
User Action:
Check the activity log for the RFCMV5S01 message. The message contains the SYSPRINT output from the IDCAMS program, which provides details of the failure.
Also, review the results of a previous assisted reorganization of the file.
You might need to perform the reorganization manually by using batch jobs.
Reason:
This message contains an IDCAMS message, P2 , generated during the processing of the P1 file.
System Action:
None.
User Action:
None.
Reason:
You tried to execute a task that requires the completion of a previous task. That previous task has not been completed.
System Action:
The request is rejected.
User Action:
Complete any previous tasks such that their status is Done.
Reason:
You cannot redo a task that completed successfully (status Done).
System Action:
Te request is rejected.
User Action:
None.
Reason:
You did not provide input to a task that requires it.
System Action:
The task is not performed.
User Action:
Perform the task again providing the correct input.
Reason:
You canceled a task that requires input.
System Action:
Default input is reapplied to the task.
User Action:
None.
Reason:
Automatic execution of the assisted CONNECT:Mailbox VSAM batch file reorganization tasks is taking place.
System Action:
The processing continues.
User Action:
If desired, you can stop the execution by pressing F6.
Reason:
You pressed F6 (StopExec) to stop the automatic execution of the assisted CONNECT:Mailbox VSAM batch file reorganization tasks.
System Action:
Procesesing continues to complete the task in progress.
User Action:
If desired, you can restart automatic execution by pressing F6 (AutoExec).
Reason:
You entered AR beside a CONNECT:Mailbox VSAM batch file that encountered an error during a previous execution of the same action. Automatic execution of the file reorganization tasks is not possible until the error is cleared.
System Action:
The task list is displayed.
User Action:
Step 1. Enter B beside the task in error to review its output to determine the cause of the failure.
Step 2. Enter R beside the task to clear the error.
Step 3. If input needs to be corrected, enter E beside the task and correct it, then press F6 (Action) to action the task.
Step 4. To continue with automatic execution, press F6 (AutoExec).
Reason:
You entered B beside an assisted CONNECT:Mailbox VSAM batch file reorganization task, but there is nothing to display. Typically, you can browse tasks that have executed or tasks that have default input.
System Action:
None.
User Action:
None.
Reason:
You entered R beside a task that does not need to be redone. You can redo a task in error.
System Action:
The request is rejected.
User Action:
None.
Reason:
The file was deallocated outside of the control of the Assisted REORG Facility. No output is available.
System Action:
None.
User Action:
None.
Reason:
The assisted CONNECT:Mailbox VSAM batch file reorganization process was suspended before completion. The next task is P1 with a P2 status.
System Action:
Processing continues at the VSAM File Statistics panel, and the file remains under your exclusive control.
User Action:
You can resume the reorganization process by entering AR (Assisted REORG) beside the file. You can also try to release control of the file by entering A (Allocate) beside it.
Reason:
You have reorganized the selected file.
System Action:
Exclusive control of the file is released.
User Action:
If you want to delete the backup file, enter E beside the last task.
Reason:
This message contains an IDCAMS message, P2 , generated during the assisted reorganization of the P1 file.
System Action:
None.
User Action:
None.
Reason:
You canceled the requested action.
System Action:
None.
User Action:
None.
Reason:
An error was encountered during automatic execution of the file reorganization tasks.
System Action:
The task list is displayed.
User Action:
Step 1. Enter B beside the task in error to review its output to determine the cause of the failure.
Step 2. Enter R beside the task to clear the error.
Step 3. If input needs to be corrected, enter E beside the task and correct it, then press F6 (Action) to action the task.
Step 4. To continue with automatic execution, press F6 (AutoExec).
Reason:
You used the FILE command to save the changed input for the dataset creation task. The task status is now Pending, and the task executes immediately when you next enter E beside it.
Note: The saved input is available to the current session only.
System Action:
None.
User Action:
Enter E beside the task to create the new dataset.
Reason:
You used the FILE command to accept the default input for the dataset creation task. The task status is now Pending, and the task executes immediately when you next enter E beside it.
System Action:
None.
User Action:
Enter E beside the task to create the new dataset.
Reason:
You must specify a dataset name in each of the hightlighted NEWNAME fields.
System Action:
The fields in error are highlighted.
User Action:
Specify a valid dataset name in each of the highlighted NEWNAME fields.
Reason:
You cannot specify the current dataset names in the NEWNAME fields.
System Action:
The fields in error are highlighted.
User Action:
Correct the names in the highlighted fields.
Reason:
The highlighted fields contain invalid VSAM dataset names.
System Action:
The fields in error are highlighted.
User Action:
Ensure that the highlighted fields contain a valid VSAM dataset name.
Reason:
You specified the same dataset name in more than one NEWNAME fields.
System Action:
The affected fields are highlighted.
User Action:
Ensure that the dataset names in the NEWNAME fields are different from each other.
Reason:
You specified a dataset name that already exists in the system.
System Action:
The field in error is highlighted.
User Action:
Ensure that the dataset name does not exist in the system.
Reason:
This message contains an IDCAMS message, P2 , generated during the processing of the P1 file.
System Action:
None.
User Action:
None.
Reason:
A required parameter was not available when this procedure was invoked.
System Action:
The procedure is terminated.
User Action:
Review the definition of the specified resource, and try again.
Reason:
The CONNECT:Mailbox VSAM File Server cannot be identified. You might have acted on a CMMGR class resource definition that does not have a VSAM File Server STC class resource definition as its parent.
System Action:
The action is not performed.
User Action:
Ensure that you have the VSAM File Server STC definition as a parent of the CONECT:Mailbox CMMGR definition.
If the Server definition is not in the knowledge base, define it based on the CMSVR template.
To relate the resources, proceed as follows:
Step 1. From any panel, enter D.R.R.CMMGR to list the CONNECT:Mailbox managers.
Step 2. Ensure that the managers belong to the correct system image, and enter R beside the manager to list any existing relationships.
Step 3. Press F11, and select the STC resource class.
Step 4. Make the appropriate VSAM File Server as a parent of the manager.
Reason:
The heartbeat procedure for TCP/IP connections has commenced processing. The message identifies the idle time setting before an alert is issued ( P1 ) and the idle time setting after which the connection will be dropped ( P2 ).
System Action:
None
User Action:
None
Reason:
The heartbeat procedure for TCP/IP connections has been invoked without the Idle Time to Alert parameter, which is required.
System Action:
Heartbeat processing is terminated.
User Action:
Update the definition of the affected resource, and specify the missing parameter.
Reason:
This is an informational message issued by the TCP/IP connections monitor for each connection found.
P1 identifies the host at the other end of the connection.
P2 is the connection ID.
P3 is the actual idle time.
P4 is the connection status.
P5 is optional. It contains ALERT if the idle time exceeds the Idle Time to Alert value in the monitor resource definition. It contains DROPPED if the idle time exceeds the Idle Time to Drop value in the monitor resource definition and the connection was dropped.
System Action:
None
User Action:
None
Reason:
The TCP/IP connections of a file transfer resource were checked, and none were found to exceed the idle time limits specified in the connections monitor resource.
P1 identifies the owning file transfer resource.
P2 is the name of the monitor resource.
P3 is the number of connections checked.
P4 is the time.
System Action:
None
User Action:
None
Reason:
A file transfer resource has a number of TCP/IP connections ( P3 ) that have exceeded the Idle Time limit value specified in the definition for the connections monitor. Of these, P4 connections have been dropped automatically because they also exceeded the specified Idle Time to Drop value.
P1 identifies the owning file transfer resource.
P2 is the name of the monitor resource.
P3 is the number of connections that have exceeded the idle time limit.
P4 is the number of connections that have been terminated.
P5 is the time.
System Action:
None
User Action:
None
Reason:
The TCP/IP interface is currently P1. The monitoring of this resource requires the status of the TCP/IP interface to be ACTIVE.
System Action:
Heartbeat processing does not take place.
User Action:
Display the current TCP/IP services status by issuing a SHOW TCPIP command. Message N3AF05 shows the current TCP/IP INTERFACE status.
If the TCP/IP INTERFACE status is INACTIVE - Issue a TCPIP START command. Wait for message N3B201 and then enter a CHK command against this resource.
If the TCP/IP INTERFACE status is QUIESCING or STOPPING - wait for the STATUS to change to INACTIVE and proceed as above.
If the TCP/IP INTERFACE status is STARTING - Wait for message N3B201 and then enter a CHK command against this resource.
Reason:
The TCP/IP connections monitor was unable to ascertain the TCP/IP port number used by the file transfer resource manager, P1 .
System Action:
Monitoring fails.
User Action:
This only applies when TCPaccess is being used.
For a CONNECT:Direct resource, the port number is either obtained automatically from CONNECT:Direct or provided in user exit $RFXPRMS. One possible problem is that an old version of $RFXPRMS is executed.
For a FTP resource, the port number must be specified in the resource definition.
Reason:
Monitoring of TCP/IP connections is not available for CONNECT:Direct for
P1 .
System Action:
Request is rejected.
User Action:
Delete the CDMON resource as it serves no purpose.
Reason:
The file transfer application requires an active listener port to receive requests for connection. The required listener port was not found or was not in a LISTEN state.
P1 identifies the owning file transfer resource.
P2 displays the name of the monitor resource.
P3 is the time.
System Action:
None
User Action:
Perform one or more the following to investigate the problem:
- Check the transient log of the monitor resource for additional details.
- If the port number of the file transfer application is specified on the Monitor Details panel of the resource definition, check its accuracy.
- Check the current state of the file transfer application, P1 .
- Check the current state of the TCP/IP region.
Reason:
The message displays a TCP/IP connections monitor trace record. P1 is the trace ID, and P2 is the trace text.
System Action:
None.
User Action:
Contact Technical Support.
Reason:
A display command was received for a connections monitor, but the requestor is not in 3270 full-screen mode.
System Action:
The display command is rejected.
User Action:
Enter the display command from a 3270 session.
Reason:
The field name P1 is not available for performing an NDB custom search.
System Action:
Field highlighted in error.
User Action:
Enter a valid field name or place a '?' in the field to get a list of valid field names. You can also enter a field prefix followed by a ? for a list of fields with that prefix.
Reason:
Selection of fields from the list was cancelled.
System Action:
None
User Action:
None
Reason:
No fields were selected from the Fields Selection List. The target file cannot be created.
System Action:
The request is terminated.
User Action:
Redo your request and select one or more fields.
Reason:
An error occurred during a GET function on the vartable P1 for key P2 . The received error code is P3 .
System Action:
The request is terminated and the procedure is ended.
User Action:
Contact your system administrator.
Reason:
A user cancelled the request to extract file transfer events from the EVNTDB database.
System Action:
The request to extract file transfer events is not processed.
User Action:
None.
Reason:
Your request to extract file transfer events starts the EVNTDB extract process as a background task that runs with your authority. Progress messages with the prefix RFLO82* are written to the activity log.
System Action:
The process is submitted to your background region.
User Action:
Check the activity log for progress. To access the list of available logs, enter the =H.L panel path.
Reason:
The NDB Search did not find any record(s) that match(es) the Extract Criteria.
System Action:
None
User Action:
Change your criteria and retry.
Reason:
A syntax error was detected during execution of an NDB SCAN statement.
System Action:
None
User Action:
Review the scan and sort expression and retry the command.
Reason:
The NetMaster for File Transfer statistics exit, NMCDSTEX, is active.
P1 shows the module name and version number. P2 identifies the ID from which CONNECT:Direct events can be received.
System Action:
None.
User Action:
None.
Reason:
The NetMaster for File Transfer statistics exit, NMCDSTEX, has requested the services of the event delivery facility, but the request was rejected because of one of the following:
- The required SSI is not active.
- The SSI is active but is running without the event delivery facility.
System Action:
Statistics records will be forwarded to the NetMaster for File Transfer region as soon as the SSI region (together with the event delivery facility) becomes active.
User Action:
Ensure that the SSI region is started with the event delivery facility (XEVNT=YES).
Reason:
The NetMaster for File Transfer statistics exit, NMCDSTEX, has requested the services of the event delivery facility, but the request was rejected because the SSI region is not currently active.
System Action:
Statistics records will be forwarded to the NetMaster for File Transfer region as soon as the SSI region (together with the event delivery facility) becomes active.
User Action:
Ensure that the SSI region is started with the event delivery facility (XEVNT=YES).
Reason:
The NetMaster for File Transfer statistics exit, NMCDSTEX, requested the services of the event delivery facility, but the request was rejected because the SSI is shutting down.
System Action:
The statistics record is not forwarded to the region. As a result, not all CONNECT:Direct events are in the file transfer log.
User Action:
Ensure that the SSI region is restarted.
Reason:
The NetMaster for File Transfer statistics exit, NMCDSTEX, issued a $NMXEVNT request to forward a CONNECT:Direct event to the event receiver. The request was rejected. The values of the R0 and R15 return codes from the $NMXEVNT request are P1 and P2 respectively.
System Action:
The event record is not forwarded to the region.
User Action:
Note the value of R0 and R15, and contact Technical Support.
Reason:
This message is the first of a group of messages that are issued when an abend occurs in the NetMaster for File Transfer CONNECT:Direct statistics exit, NMCDSTEX. The complete set of messages is:
RFCX06 ABEND AT +nnnn IN xxxxxxxx xxxx LEVEL xxxxxx
RFCX07 RECEIVED R1=xxxxxxxx RECORD ADDR=xxxxxxxx RECORD TYPE=xx RFCX08 PSW=xxxxxxxx xxxxxxxx INT=xxxxxxxx
RFCX09 R0-R3 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
RFCX09 R4- R7 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
RFCX09 R8-R11 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
RFCX09 R12-R15 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
Message RFCX06 identifies the abend offset, module, version, and level.
Message RFCX07 identifies the parameters passed by CONNECT:Direct:
RECEIVED R1 is the value in R1 when the exit was called.
RECORD ADDR is the value of the first full word addressed by R1. If R1 was invalid, this is shown as UNKNOWN.
RECORD TYPE is the CONNECT:Direct statistics record type. If either R1 or the record address was invalid, this is shown as ??.
Message RFCX08 identifies the failing PSW and program interruption information.
Message(s) RFCX09 identify the general purpose registers at the time of the abend.
System Action:
The statistics record is ignored, and processing continues.
User Action:
Contact Technical Support. Ensure that you have the following information available:
- The entire group of messages (RFCX06 to RFCX09) - The version and maintenance level of CONNECT:Direct
Reason:
This message is one of a group of messages that are issued when an abend occurs in the NetMaster for File Transfer CONNECT:Direct statistics exit, NMCDSTEX.
For more information, see the help for message RFCX06.
System Action:
See RFCX06.
User Action:
See RFCX06.
Reason:
This message is one of a group of messages that are issued when an abend occurs in the NetMaster for File Transfer CONNECT:Direct statistics exit, NMCDSTEX.
For more information, see the help for message RFCX06.
System Action:
See RFCX06.
User Action:
See RFCX06.
Reason:
This message is the last of a group of messages that are issued when an abend occurs in the NetMaster for File Transfer CONNECT:Direct statistics exit, NMCDSTEX.
For more information, see the help for message RFCX06.
System Action:
See RFCX06.
User Action:
See RFCX06.
Reason:
The CONNECT:Direct statistics exit, NMCDSTEX, was unable to obtain or free working storage. P1 is the failing request, and P2 is the value of the R15 code.
System Action:
The request cannot be processed.
User Action:
Use the R15 code to determine the cause of the error.
Reason:
The CONNECT:Direct statistics exit, NMCDSTEX, tried to load a load module, but the loading operation failed. The load module name is P1, and the values of the R0 and R15 return codes from the LOAD or BLDL instruction are P2 and P3 respectively.
System Action:
The load module is not loaded and is excluded from further processing, the result of which depends on which module has failed to load:
Module NMCDSTX No statistics records are forwarded to the region. As a result, its log file is incomplete.
Other Modules Other modules relate to your own exits. The result of not executing these modules depends on your implementation.
User Action:
Use the R0 and R15 return codes to determine the cause of the error.
A common error is R15=4 (accompanying an 806 system completion code), which indicates that the module could not be found in the load library list (that is, the list of libraries that are specified in the CONNECT:Direct STEPLIB).
Ensure that the Management Services LPALOAD load library is either included in the CONNECT:Direct STEPLIB or included in the system link list.
Notes: - All libraries included in the STEPLIB must be APF authorized. - The CONNECT:Direct region must be recycled to restart the statistics exit.
Reason:
The forwarding of CONNECT:Direct statistics event has resumed. This message indicates a recovery from a previous error condition (for example, the required SSI region was successfully restarted).
System Action:
CONNECT:Direct statistics events are now sent to the event receiver.
User Action:
None.
Reason:
The statistics exit, NMCDSTEX, has requested the services of the event delivery facility, but the request was rejected because the event delivery facility could not obtain storage (R0=7 and R15=28 returned from $NMXEVNT).
System Action:
The CONNECT:Direct statistic event is not sent to the event receiver.
User Action:
Contact Technical Support.
Reason:
This is a diagnostic trace message.
The statistics exit, NMCDSTEX, was called by CONNECT:Direct.
P1 is the Trace Type ( A for Alert trace, T for solicited trace).
P2 is the CONNECT:Direct statistics record type.
P3 is the number of statistics records received by NMCDSTEX.
P4 is the number of statistics records received by NM000FCX.
P5 is the expected number of statistics records that should have been received by NM000FCX.
P6 is the current Exit Process Status byte.
P7 / R8 is the last EPS return code (R15/R0).
System Action:
None.
User Action:
For trace type A , contact Technical Support. Ensure that you have the following information available:
- The entire group of messages (RFCXxx)
- The version and maintenance level of CONNECT:Direct
Reason:
The CA NetMaster FTM statistics exit NMCDSTEX P1 trace status has changed. P2 is the current trace status.
System Action:
None.
User Action:
Contact Technical Support.
Reason:
The statistics exit, NMCDSTEX, was called by CONNECT:Direct. The exit has successfully loaded another load module ( P1 ), and its entry point address is shown ( P2 ).
This is a diagnostic trace message.
System Action:
None.
User Action:
None.
Reason:
The statistics exit, NMCDSTEX, was called by CONNECT:Direct. The exit has called the PPI to send data to the this region, and the PPI return code is shown ( P1 ).
This is a diagnostic trace message.
System Action:
None.
User Action:
None.
Reason:
The statistics exit, NMCDSTEX, was called by CONNECT:Direct. The statistics record type is shown ( P1 ). The exit processing ( P2 ) is either IGN, if the record is ignored by the exit, or SES, if the record is to be forwarded to this region. Identification data from the record is shown ( P3 ), which depends on the record type.
This is a diagnostic trace message.
System Action:
None.
User Action:
None.
Reason:
The statistics exit, NMCDSTEX, was unable to retrieve the basic START event data. The problem was in accessing the internal CONNECT:Direct data structure via the Task Control Area (TCA).
System Action:
The event is discarded.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message
- CONNECT:DIRECT message log
Reason:
The statistics exit, NMCDSTEX, was unable to retrieve the basic START event data. The problem was in validating the internal CONNECT:Direct data structure through the Task Control Area (TCA).
System Action:
The event is discarded.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message
- CONNECT:DIRECT message log
Reason:
The $RFDATFU procedure issues this message when the debugging option is enabled (&GLBL$RFDATDU=YES).
P1 identifies the phase the procedure is in, and P2 is the supporting text.
System Action:
None.
User Action:
None.
Reason:
An initialization error occurred when processing the ReportCenter or Neugent data feed.
System Action:
The processing terminates.
User Action:
If the error persists, contact Technical Support.
Reason:
You tried to inactivate a NetMaster P1 data feed when no data feed processing was active.
System Action:
The attempted action is not performed.
User Action:
None.
Reason:
The ReportCenter or Neugent data feed is active. The NCL ID of the procedure is P1 .
System Action:
None.
User Action:
None.
Reason:
You tried to start an active ReportCenter or Neugent data feed.
System Action:
The attempted action is not performed.
User Action:
None.
Reason:
You tried to inactivate an inactive NetMaster P1 data feed.
System Action:
The attempted action is not performed.
User Action:
None.
Reason:
The Neugent or ReportCenter data feed has terminated.
System Action:
None.
User Action:
None.
Reason:
The P1 data feed has become active.
System Action:
P1 data feed is active.
User Action:
None.
Reason:
The P1 data feed has become inactive.
System Action:
P1 data feed is inactive.
User Action:
None.
Reason:
The P1 data feed has terminated because of a mapping failure.
P1 is either the REPORTER or the NEUGENT data feed.
P2 is the MDO diagnostic information.
System Action:
The data feed is terminated.
User Action:
Restart the data feed. If the problem persists, contact Technical Support and provide a copy of this message to aid resolution.
Reason:
The file transfer event is missing a source or target address, taskname or product field. The event is not sent to ReportCenter for statistical analysis.
System Action:
None.
User Action:
Check the historical File Transfer record (/FTHIST) and if the problem persists, contact Technical Support.
Reason:
P1 is a required keyword parameter, but it was not passed by the calling process.
System Action:
The procedure sets a return code of 8 and returns processing to the caller.
User Action:
Contact your local Support Center.
Reason:
An invalid keyword value was passed. The keyword is P1 , and the invalid value is P2 .
System Action:
The request is rejected.
User Action:
Contact your local Support Center.
Reason:
A report was submitted for printing in background mode. The request number is P1 .
System Action:
The report is being printed by the Print Services Manager.
User Action:
None.
Reason:
No Records were found for the specified reporting period.
System Action:
The processing terminates.
User Action:
None.
Reason:
The P1 file transfer events EVNTDB NDB has not been started.
System Action:
The processing terminates.
User Action:
Check the Initialization log for the $RF EVENTLOG parameter group, and determine why P1 has not been started.
Access the log as follows:
Step 1. Enter the /PARMS shortcut to list the parameter groups.
Step 2. Enter S beside the EVENTLOG parameter group to display its settings.
Step 3. Press F5 to display the activities logged for the parameter group.
Reason:
An NDB error was encountered during exception report processing.
P1 is an NDB response (or error) code.
P2 is the line number that locates the error in the procedure.
P3 is the NDB command that is being processed when the error occurred.
P4 shows the operands used in the P3 command.
System Action:
The processing terminates.
User Action:
For information about the NDB codes, enter the /NDBERR shortcut at a ===> prompt to display the Browse NDB Error Codes panel. Determine the reason for the error, and take appropriate action.
Reason:
All the file transfer END events required by the exception report filter were found in the specified reporting period.
System Action:
The processing terminates normally.
User Action:
None.
Reason:
The EVNTDB file transfer events database is not available due to maintenance operation, P1 . No exception report processing is possible.
System Action:
The processing terminates.
User Action:
Retry later.
Reason:
Not all the file transfer END events required by the exception report filter were found in the specified reporting period.
System Action:
The processing completes normally.
The following output variables are available at completion:
&$RMMCHKFTOT contains the number of criteria lines in the filter.
&$RMMCHKCRnnn contains the identifier for the nnnth criteria line in the filter. The syntax is the concatenation of the following with > as the delimiter:
- Source Data or Target Data or Transfer ID
- Type
- Number
- Source System/Node
- Target System/Node
- Minimum File Size
- Maximum File Size
For example, SOLVE.SOFT.CD%>TGT>10>>>>> is the criteria for 10 received datasets with names beginning with SOLVE.SOFT.CD.
&$RMMCHKEXnnn contains the number of transfers expected for the nnnth criteria line.
&$RMMCHKFNnnn contains the number of transfers found for the nnnth criteria line.
&$RMMCHKPREQ# contains the print request number if you requested a printed report.
User Action:
None.
Reason:
Not all the file transfer END events required by the exception report filter were found in the specified reporting period.
System Action:
The processing completes normally.
The following output variables are available at completion:
&$RMMCHKFTOT contains the number of criteria lines in the filter.
&$RMMCHKCRnnn contains the identifier for the nnnth criteria line in the filter. The syntax is the concatenation of the following with > as the delimiter:
- Source Data or Target Data or Transfer ID - Type - Number - Source System/Node - Target System/Node - Minimum File Size - Maximum File Size
For example, SOLVE.SOFT.CD%>TGT>10>>>>> is the criteria for 10 received datasets with names beginning with SOLVE.SOFT.CD.
&$RMMCHKEXnnn contains the number of transfers expected for the nnnth criteria line.
&$RMMCHKFNnnn contains the number of transfers found for the nnnth criteria line.
&$RMMCHKPREQ# contains the print request number if you requested a printed report.
Some information, however, is lost because the required value of nnn exceeds 999. This can happen if you included a control (CTL) file in the reporting filter.
User Action:
To view all exceptions, use the online reporting function from the Exception Reporting Menu. To access the menu from any panel, enter
H.ER . Select the required type of filters, and enter E beside the required filter to generate the report.
Reason:
An invalid value has been given for keyword P1 .
System Action:
The request is rejected and the procedure is terminated.
User Action:
Contact your system administrator.
Reason:
The NDB Search did not find any record(s) that match(es) the Extract Criteria.
System Action:
None
User Action:
Change your criteria and retry.
Reason:
The Exit Key has been entered on the Fields Selection List but no fields have been selected. The target file cannot be created without fields.
System Action:
The request is terminated.
User Action:
Redo your request and select one or more fields.
Reason:
An error occurred during a GET function on the vartable P1 for key P2 . The received error code is P3.
System Action:
The request is terminated and the procedure is ended.
User Action:
Contact your system administrator.
Reason:
The user has cancelled the Extract Operation.
System Action:
The Extract file is not created.
User Action:
None
Reason:
An error occurred for the P1 action on NDB P2 . The NDB error code is
P3 and the NDB information code is P4 .
System Action:
The request is terminated and the procedure is ended.
User Action:
Contact your system administrator.
Reason:
The user has cancelled the Search Operation.
System Action:
The Extract file is not created.
User Action:
None
Reason:
Your request to extract file transfer events starts the EVNTDB extract process as a background task that runs with your authority. Progress messages with the prefix RFLO82* are written to the activity log.
System Action:
The process is submitted to your background region.
User Action:
Check the activity log for progress. To access the list of available logs, enter the =H.L panel path.
Reason:
A user cancelled the request to extract file transfer events from the EVNTDB database.
System Action:
The request to extract file transfer events is not processed.
User Action:
None.
Reason:
A request to present a field list failed because an error was encountered accessing a vartable. The request was P1 , the identifier of the vartable was P3 , the feedback code was P2 and the key value used was P4 .
System Action:
The request is rejected.
User Action:
Interpret the feedback code using the NCL Reference.
Reason:
A request to present a field list failed because an error was encountered allocating a vartable. The request was P1 , the identifier of the vartable was P3 and the feedback code was P2 .
System Action:
The request is rejected.
User Action:
Interpret the feedback code using the NCL Reference.
Reason:
An error occurred for the P1 action on NDB P2 . The NDB error code is
P3 and the NDB information code is P4 .
System Action:
The request is terminated and the procedure is ended.
User Action:
Contact your system administrator.
Reason:
You have specified invalid dates.
System Action:
The validation fails.
User Action:
Correct the dates in the highlighted fields.
Reason:
You have specified an invalid date-time combination.
System Action:
The validation fails.
User Action:
Correct the date and time in the highlighted fields.
Reason:
To generate the file transfer exception report, you must specify the period over which you want to report.
System Action:
The validation fails.
User Action:
Specify the date range and optionally, the time range, in the From and To fields.
Alternatively, you can specify a value in the Within the last field.
Reason:
The From and To fields are mutually exclusive with the Within the last field.
System Action:
The validation fails.
User Action:
Specify value in either the From and To fields or the Within the last field, but not both.
Reason:
The P1 fields require valid value.
System Action:
The validation fails.
User Action:
Specify value in the P1 fields.
Reason:
An invalid parameter P1 with a value of P2 was passed to $RFFT00L.
System Action:
The procedure terminates.
User Action:
Contact Technical Support.
Reason:
The File Transfer Monitor cannot support the LOCATE command due to the complex nature of its key structures and the ability to SORT the list on up to three fields. The FIND command should be used to locate the required information.
System Action:
The request is rejected.
User Action:
Use the FIND command as an alternative.
Reason:
This is an informational message issued by the File Transfer Monitor indicating that some change has occurred for the transfer identified by P2 , which is not in the current window. P1 is either ABOVE or BELOW and indicates the direction in which the change is to be found.
System Action:
None
User Action:
If you want to see the change which has occurred, scroll the list in the indicated direction.
Reason:
The Specified Profile element P1 has been set to the displayed value
P2 .
System Action:
None
User Action:
The File Transfer Monitor will use the new value for its displays.
Reason:
An invalid parameter with value P2 was supplied for the command P1 .
P3 may contain information about the correct values.
System Action:
The request is rejected.
User Action:
Correct the invalid value and retry.
Reason:
An attempt by the File Transfer Monitor to allocate its internal tables has failed, probably due to insufficient storage.
System Action:
The Monitor terminates.
User Action:
Contact your support representative.
Reason:
The requested filter was not found. The File Transfer Monitor Filter has been reset.
System Action:
None
User Action:
Define a new File Transfer Monitor Filter.
Reason:
The Specified Profile Element P1 was not changed from its previous value P2 and a redisplay was not done.
System Action:
None
User Action:
None
Reason:
The selected file transfer no longer resides in the internal file transfer table. ENDED or FAILED transfers only remain current for a short time before being removed from the table.
System Action:
The request is rejected. The display is updated and the transfer in question is removed.
User Action:
If information about the transfer in question is required, it may be obtained from the File Transfer Event Database through the Reporting Menu.
Reason:
The request P1 may only be issued against an active transfer.
System Action:
The request is rejected.
User Action:
None
Reason:
Real Time Monitoring is not available for the File Transfer product
P1 .
System Action:
The request is rejected.
User Action:
None
Reason:
A request was made to either START or STOP Real Time Monitoring of a file transfer. If the request was to START Monitoring, then P1 will be
ALREADY , if the request was to STOP Monitoring then P1 will be NOT .
System Action:
The request is rejected.
User Action:
None
Reason:
The TERMINATE command is not available for the File Transfer product
P1 .
System Action:
The request is rejected.
User Action:
None
Reason:
The request requires access to a file transfer manager named P1. The file transfer manager P1 does not exist in the P2 database.
System Action:
The request is rejected.
User Action:
Define a file transfer manager resource.
Reason:
Status monitoring is not available for BSC batch transmissions as CONNECT:Mailbox does not currently provide transmission block/byte count for BSC line activity.
System Action:
The request is rejected.
User Action:
None
Reason:
The P1 file transfer was terminated by the user, P2 .
System Action:
The TCP/IP connection is dropped, and the file transfer is terminated.
User Action:
None.
Reason:
You entered T beside a file transfer to terminate it. However, the associated TCP/IP FTP data connection no longer exists because, for example, the connection failed.
System Action:
The request is aborted.
User Action:
None. The status of the transfer will be updated when the FTP control connection times out.
Reason:
In-progress status monitoring is not available for CA-XCOM file transfers that are executed immediately. Currently, the CA-XCOM application does not provide a command interface to transfers of the
EXECUTE type.
System Action:
The request is rejected.
User Action:
None.
Reason:
The P1 file transfer was terminated by the user, P2 .
System Action:
The file transfer is terminated.
User Action:
None.
Reason:
The T (Terminate) command failed to terminate the P1 file transfer. P2 provides the reason.
System Action:
The CA-XCOM application indicates that it cannot terminate the P1 transfer. If the transfer is active, it will continue.
User Action:
Review the activity log and the CA-XCOM log to deterimine the cause, and correct the problem as required.
Reason:
The TERMINATE command is not supported for CA-XCOM transfers that are executed immediately.
System Action:
The request is rejected.
User Action:
None.
Reason:
In-progress status monitoring is not available for GENAPI file transfers.
System Action:
The request is rejected.
User Action:
None.
Reason:
The TERMINATE command is not supported for GENAPI transfers.
System Action:
The request is rejected.
User Action:
None.
Reason:
In-progress status monitoring is not available for IBM z/OS Communications Server FTP Client/Sever transfers.
System Action:
The request is rejected.
User Action:
None.
Reason:
The process $RFFTALT was called with invalid parmaters.
System Action:
The request is rejected and the process stops.
User Action:
Contact Technical Support.
Reason:
The command P1 is invalid and not supported.
System Action:
The request is rejected.
User Action:
Enter a valid command and retry.
Reason:
The update of a message definition was cancelled by the user.
System Action:
None.
User Action:
None.
Reason:
An attempt was made to browse the FTLogs Logs or perform Log Administration but no VSAM log data files are available.
By default, three FTLogs Log VSAM files are defined at NetMaster installation time and allocated and opened at region startup.
FTLogs Logs are VSAM datasets named ?dsnqual.FTLOG01, FTLOG02, FTLOG03 They should be allocated to the region as DD's FTLOG01, FTLOG02, FTLOG03 and a UDBCTL OPEN performed with the same names as the FILEIDs.
Up to 7 files, FTLOG01 - FTLOG03, may be used.
System Action:
Activity Log browse or administration functions are not available.
User Action:
Ensure that at least one FT log VSAM file is correctly allocated and opened.
Use SH VSAM=FTLOG* to check that correctly defined VSAM datasets are allocated as DDNAMEs FTLOG01 and so on.
A UDBCTL OPEN.. should have been performed for each file - recommended parameters are DEFER, LSR, SIS
Refer to the Common Services documentation for more information.
Reason:
The message displays a file transfer event monitor trace record.
P1 is the trace ID, and P2 is the trace text.
System Action:
None.
User Action:
Contact Technical Support.
Reason:
No File Transfer Ruleset is loaded in the region so Reactive File Transfer Monitoring cannot proceed.
System Action:
Monitoring by File Transfer Rules is not available.
User Action:
If monitoring by File Transfer Rules is desired, a File Transfer Ruleset must be loaded as follows:
1. Enter the /PARMS shortcut to display the list of parameter groups.
2. Beside the AUTOIDS parameter group, enter U .
3. In the Active Ruleset for File Transfer field, name the File Transfer Ruleset to be loaded.
4. Press F6 (Action) to load the Ruleset.
Reason:
The File Transfer Monitor procedure has encountered an internal system error. P1 is the reason for the failure.
System Action:
Processing continues.
User Action:
Contact Technical Support.
Reason:
A normalised file transfer event cannot be delivered as, there is no active event receiver.
System Action:
The normalised file transfer event is discarded.
User Action:
The FILE TRANSFER EVENT LOGGER ($RFLO81Z) procedure may have terminated.
From an OCS window issue the following command:
SHOW NCL=ALL PROC=$RFLO81Z
Print the activity log from before the time of the first occurrence of message RFFTMON03 till the time just after the above SHOW COMMAND.
Contact Technical Support with this diagnostic data.
Reason:
The number of concurrent file transfer rule alerts in the File Transfer Rules management table has reached the supported limit of P1.
System Action:
File transfer rule alerts are still raised; however, the oldest alerts may not be updated or cleared.
User Action:
This condition can occur when a large number of alerts is raised because too many file transfer events meet the criteria set by one or more file transfer rules. Review the following criteria:
Review the active file transfer rule set, and specify less generic filters.
Close active file transfer rule alerts, and consider setting Alert Autoclear to YES.
Reduce the time-out period.
Reason:
The number of active file transfers in the Active File Transfer Monitor table has reached the supported limit of P1.
System Action:
The oldest file transfers are removed from the Active File Transfer Monitor table (and display) to accommodate newer transfers.
User Action:
Review the FTMONITOR (File Transfer Monitor) Customizer parameter group. Consider reducing the Transfer Visibility values. For example, if you are expecting a large number of file transfer failures in a relatively short period of time, you can reduce the Failed Transfer Visibility from 30 minutes (the default) to 5 minutes.
Reason:
This message displays an FTP transfer event trace record. P1 is the trace ID and P2 is the trace text.
System Action:
None.
User Action:
Contact Technical Support.
Reason:
The CA NetMaster FTP event handler procedure failed because of an internal system error. P1 is the reason for the failure.
System Action:
The procedure terminates.
User Action:
Contact Technical Support with the diagnostic data provided.
Reason:
The NMFTP Monitor cannot be contacted. The associated error code is P1 and the reason is P2.
The FTP event handler procedure requires an active EPS connection to the NMFTP Monitor (NMFTPMON) for the monitoring of FTP transfer events.
Use the error code P1 to determine why the NMFTP Monitor cannot be contacted:
Indicates that the NMFTP Monitor (NMFTPMON) is not responding to an EPS poll.
Indicates that the SSI (to which this region is connected) is not available or does not provide EPS event support.
Indicates that an internal error has occurred.
System Action:
Processing continues, but FTP events from IBM FTP servers and clients are not available until the problem is corrected.
User Action:
Take appropriate action based on the error code:
Contact your local support representative with a copy of the activity log.
Reason:
The CA NetMaster FTP event handler procedure $RFFTPEN failed. A backup copy has been restarted; its NCL ID is P1. Some FTP file transfer events may have been lost.
System Action:
Processing continues; however, some FTP events from IBM FTP Servers/Client may have been lost.
User Action:
Check the activity log to determine the reason for the initial $RFFTPEN procedure failure.
Contact Technical Support with the diagnostic data obtained from the activity log.
Reason:
The CA NetMaster NMFTP Monitor was previously unavailable and is now operational.
System Action:
The FTP events processing from IBM FTP Servers/Clients resumes.
User Action:
Check for the earliest RFFTPEN02 message in the activity log. This message was issued when the NMFTP Monitor (NMFTPSSI) could not be contacted and gives the associated error code and text. Any IBM FTP Servers/Clients file transfer events from the time of first RFFTPEN02 message until now are lost.
Reason:
An error occurred whilst retrieving the transfer details. The reason is one of the following:
1- REQUEST NOT FOUND The SHOW XMIT command returned the N43C14 or N43D14 message (TRANSMISSION REQUEST DOES NOT EXIST). The command was retried unsuccessfully.
2- INTREAD FAILED WITH xx An INTREAD has failed. xx is the INTREAD failure code.
System Action:
The file transfer event is incomplete. Normal processing continues.
User Action:
Contact Technical Support.
Reason:
The NetMaster for File Transfer FTS message handler is ready and is waiting for FTS messages from the FTS region that is managed by FTSMGR,
P1 . The name of the link is P2 .
System Action:
The NetMaster for File Transfer region waits for FTS messages.
User Action:
None.
Reason:
The NetMaster for File Transfer FTS message handler has lost contact with the FTS region, P1 , due to a link failure. Recovery of the link, P2 , is being attempted. The retry count indicates the current number of consecutive attempts. This message will be followed by message RFFTSM02 or RFFTSM03.
System Action:
The system attempts to restart the link.
User Action:
None.
Reason:
The NetMaster for File Transfer FTS message handler is attempting to re-contact the FTS region, P1 , over the link, P2 , following the failure, P3 . Retry count indicates the current number of consecutive attempts.
System Action:
The system will attempt to re-contact the FTS region.
User Action:
None.
Reason:
The NetMaster for File Transfer FTS message handler for the FTS region,
P1 , has failed. The reason for the failure is P2 .
System Action:
The message handler procedure terminates.
User Action:
Proceed as follows according to the reason for the failure:
Reason Action
RETRY LIMIT EXCEEDED Check the status of the link to the FTS region and correct any problems. This message follows messages RFFTSM01 and RFFTSM02.
SIGNON CMD TIMEOUT Check that the BSYS background user of this region has been defined on the FTS region.
The BSYS user ID is of the form xxxxBSYS . To determine the ID for this region, issue SHOW USERS to list the logon users.
xxxxxx CMD TIMEOUT Check the current status of the FTS region and correct any problems.
All other reasons Contact Technical Support.
Reason:
The NetMaster for File Transfer FTS message handler detects that there are currently no receivers for events from the FTS region that is managed by FTSMGR, P1 . The event procedure, P2 , will be started.
System Action:
The required event receiver procedure is started.
User Action:
None.
Reason:
The FTS transmission request, P2 (to or from the FTS region, P3 ), has started. However, the transmission start event could not be generated because the required file names could not be obtained.
System Action:
The generation of the transmission start event is deferred, waiting for message N44x07.
User Action:
If the request specifies DDNAME, check that the BSYS background user of this region is defined to the origin and destination FTS regions. The ID is of the form xxxxBSYS . To determine the ID for this region, issue
SHOW USERS to list the logon users.
If the problem is not because of the above causes, contact Technical Support.
Reason:
The FTS request, P3 ,has completed. However, the expected completion message, P2 , was not received.
System Action:
If the missing FTS message is N44x01 or N44x03, then the transmission end event cannot be generated because the required request name and destination/origin names are unavailable.
If the missing FTS message is N44x07, then the transmission end event is generated. However, the source and/or the target file names cannot be obtained.
User Action:
If the request specifies DDNAME, check that the BSYS background user of this region is defined to the origin and destination FTS regions. The ID is of the form xxxxBSYS . To determine the ID for this region, issue SHOW USERS to list the logon users.
If the problem is not because of the above causes, contact Technical Support.
Reason:
A copy of the NetMaster for File Transfer FTS message handler procedure for the FTS region, P1 , was started. However, this procedure is already running.
System Action:
The procedure start is ignored.
User Action:
None.
Reason:
The P1 NCL procedure could not be loaded on the P2 FTS region. This procedure is required for the FTS file transfer monitoring.
System Action:
The FTS message handler is terminated.
User Action:
Check that the P1 NCL procedure has been installed on the required FTS region. This NCL procedure is distributed with the NetMaster for File Transfer product.
If the problem is not because of the above, contact Technical Support.
Reason:
The FTS agent NCL procedure P1 successfully initialized on the FTS region P2.
System Action:
None.
User Action:
None.
Reason:
The current FTS transmission status indicates an active FTS transmission for which no prior notification has been received. The request name is P1 , the direction is P2 , and the name of the link to the FTS region is P3 .
System Action:
The missing start event is generated.
User Action:
None
Reason:
The command P1 could not be routed via P2 . P2 is not currently active.
System Action:
The command is rejected. Recovery of the INMC link P2 will be attempted.
User Action:
Wait for the automatic INMC link recovery. If the recovery fails use the SHOW LINKS command to determine the status of the link P2.
Reason:
An error has occurred during the signon process to P1. A signon retry will be attempted.
System Action:
The current Signon process is aborted. The cause of the error has been logged in the FTSMGR P1 Transient Log. Signon retry will be attempted.
User Action:
Check the FTSMGR P1 Transient Log for error message(s) to determine the reason for the signon failure. Correct if required and wait for the signon retry.
Reason:
The NetMaster for File Transfer FTS message handler procedure has failed due to a possible data error. The error is identified by the following:
- Line number, P1 , and procedure name, P2 , where the error occurred
- Error condition raised, P3 - Verb operand that has detected the error, P4 , if applicable
- Statement text where the error occurred, P5
System Action:
Message monitoring continues. However, an incomplete File Transfer event may have been generated. If file transfer logging is active, this message is also written to the file transfer log.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message
- A copy of the activity log
Reason:
Recursive errors have been detected in the File Transfer FTS message handler procedure. This message follows messages RFFTSM13 which describe the errors. This message is followed by several NM304xx diagnostic messages.
System Action:
The File Transfer FTS message handler procedure is terminated. If file transfer logging is active, this message is also written to the file transfer log.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of the preceding RFFTSM13 messages - Full text of the related NM304xx messages - A copy of the activity log
Reason:
This message displays a file transfer FTS message and events handler trace record. P1 is the trace ID, and P2 is the trace text.
System Action:
None.
User Action:
Contact Technical Support.
Reason:
This is a diagnostic trace message.
The CA NetMaster FTM FTP post processing exit (NM000FPX) was called by the IBM Communication Server FTP post processing user exit (FTPOSTPR) and the TRACE is currently active.
The FTP event processing selection is identified as follows:
selected-The FTP event is selected for processing by CA NetMaster FTM.
not selected-The FTP event is not selected for processing by CA NetMaster FTM.
System Action:
If P3 = selected, the FTP Event is forwarded to the CA NetMaster FTM region receiving events with a receiver ID of P4.
If P3 = not selected, the FTP Event is not forwarded.
User Action:
Contact Technical Support.
Reason:
The CA NetMaster FTM FTP post processing exit (NM000FPX) was called by the IBM Communication Server FTP post processing user exit (FTPOSTPR) without the required parameter list.
System Action:
The FTP Event processing is aborted.
User Action:
If you provided the IBM Communication Server FTP post processing user exit (FTPOSTPR), check the exit source code to ensure that the CA NetMaster FTP post processing exit (NM000FPX) was called with register one (R1) pointing to the FTP exit parameter list.
If you are using the IBM Communication Server FTP post processing user exit (FTPOSTPR) distributed with CA NetMaster FTM, contact Technical Support.
Reason:
The CA NetMaster FTM FTP post processing exit (NM000FPX) requested the services of the event delivery facility, but the request was rejected because of one of the following:
System Action:
FTP event records are forwarded to the CA NetMaster FTM region when the SSI region (with the event delivery facility) becomes active.
User Action:
Ensure that the SSI region is started with the event delivery facility (XEVNT=YES).
Reason:
The CA NetMaster FTM FTP post processing exit (NM000FPX) requested the services of the event delivery facility, but the request was rejected because the SSI region is not active.
System Action:
FTP event records are forwarded to the CA NetMaster FTM region when the SSI region (with the event delivery facility) becomes active.
User Action:
Ensure that the SSI region is started with the event delivery facility (XEVNT=YES).
Reason:
The CA NetMaster FTM statistics exit, NMCDSTEX, requested the services of the event delivery facility, but the request was rejected because the SSI is shutting down.
System Action:
The statistics record is not forwarded to the region.
User Action:
Ensure that the SSI region is restarted.
Reason:
The CA NetMaster FTM FTP post processing exit (NM000FPX) issued a $NMXEVNT request to forward an FTP event to the event receiver. The request was rejected. The values of the R0 and R15 return codes from the $NMXEVNT request are P1 and P2, respectively.
System Action:
The event record is not forwarded to the CA NetMaster region.
User Action:
Note the value of R0 and R15, and contact Technical Support.
Reason:
This message is the first of a group of messages that are issued when an abend occurs in the CA NetMaster FTM FTP post processing exit NM000FPX. The following is the complete set of messages:
RFFX06 ABEND at +nnnn in xxxxxxxx xxxx Level xxxxxx RFFX07 R1 at entry: xxxxxxxx, Event add: xxxxxxxx, RcvID: xxxxxxxx, Cmd: xxxx RFFX08 PSW=xxxxxxxx xxxxxxxx Interrupt-Code: xx RFFX09 R0 - R3: xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx RFFX09 R4 - R7: xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx RFFX09 R8 -R11: xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx RFFX09 R12-R15: xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
Message RFFX06 identifies the abend offset, module, version, and level.
Message RFFX07 identifies the following:
Message RFFX08 identifies the failing PSW and program interruption information.
Messages RFFX09 identify the general purpose registers at the time of the abend.
System Action:
The FTP event record is ignored and processing continues.
User Action:
Contact Technical Support. Ensure that you have the following information available:
Reason:
This message is one of a group of messages issued when an abend occurs in the CA NetMaster FTM FTP post processing exit NM000FPX.
For more information, see the help for message RFFX06.
System Action:
See RFFX06.
User Action:
See RFFX06.
Reason:
This message is one of a group of messages issued when an abend occurs in the CA NetMaster FTM FTP post processing exit NM000FPX.
For more information, see the help for message RFFX06.
System Action:
See RFFX06.
User Action:
See RFFX06.
Reason:
This message is one of a group of messages issued when an abend occurs in the CA NetMaster FTM FTP post processing exit NM000FPX.
For more information, see the help for message RFFX06.
System Action:
See RFFX06.
User Action:
See RFFX06.
Reason:
The CA NetMaster FTM FTP post processing exit (NM000FPX) was called by the IBM Communication Server FTP post processing user exit (FTPOSTPR), which is executing on an unsupported version of the IBM Communication Server.
System Action:
The FTP event is ignored.
User Action:
Do one of the following:
Reason:
The CA NetMaster FTM FTP post processing exit (NM000FPX) requested the services of the event delivery facility, but the request is rejected because the event delivery facility cannot obtain storage (R0=7 and R15=28 returned from $NMXEVNT).
System Action:
The FTP event is not sent to the CA NetMaster FTM region.
User Action:
Contact Technical Support.
Reason:
The CA NetMaster FTM FTP post processing exit (NM000FPX) cannot obtain or free working storage. P1 is the failing request and P2 is the value of the R15 code.
System Action:
The request cannot be processed.
User Action:
Use the R15 code to determine the cause of the error.
Reason:
This is a diagnostic trace message.
The Generic Data Transfer API, NM000FGX, was called with TRACE OPTION ON. The Generic Event record was identified as follows:
P1 is the Transfer ID.
P2 is the Generic Event Type. The valid types are:
S for Transfer Start event
E for Transfer End event
F for Transfer Failure event
P3 is the receiver ID from which Generic Events can be received.
P4 is Generic Event Status and is set to one of the following:
COMPLETE indicates that the Generic Event record was validated and will be forwarded to the NetMaster File Transfer region(s).
INCOMPLETE indicates that an error has occurred. The reason is described by P5 (the return code).
P5 is the return code and is set as follows:
|
RC IN Hex |
Reason |
System Action |
User Action |
|---|---|---|---|
|
0 |
Normal Completion |
(1) |
None |
|
4 |
Transfer ID is missing |
(1) |
(1) |
|
8 |
Transfer ID is invalid |
(1) |
(1) |
|
C |
Event Type is invalid |
(1) |
(1) |
|
10 |
Parameter List Address (R1) is null |
(2) |
(1) |
|
18 |
Event Address is null |
(2) |
(1) |
|
20 |
No active SOLVE SSI with XEVNT support |
(2) |
(2) |
|
24 |
The SOLVE SSI REGION is not active |
(2) |
(2) |
|
28 |
The SOLVE SSI is in shutdown |
(2) |
(3) |
|
2C |
Unable to send EVENT |
(2) |
(3) |
|
40 |
NM000FGX Abended |
(2) |
(1) (3) |
|
44 |
Unable to obtain storage |
(2) |
(3) |
System Action:
For Return Code System Action notes:
(1) The Generic Event is forwarded.
(2) The Generic Event is not forwarded.
User Action:
For Return Code User Action notes:
(1) Check and correct the Generic Event record contents and format.
(2) Ensure that the SSI region is started with the event delivery facility (XEVNT=YES).
(3) Check system log for associated RFGEnn message(s).
Reason:
The Generic Data Transfer API, NM000FGX, requested the services of the event delivery facility, but the request was rejected because the SSI is shutting down.
System Action:
The Generic Event record is not forwarded to this region. This data transfer event is lost.
User Action:
To enable this region to receive Generic Events again, ensure that the SSI region is restarted.
Reason:
The Generic Data Transfer API, NM000FGX, issued a $NMXEVNT request to forward a Generic Event to the event receiver. The request was rejected. The values of the R0 and R15 return codes from the $NMXEVNT request are P1 and P2 respectively.
System Action:
The Generic Event is not forwarded to this region.
User Action:
Note the value of R0 and R15, and contact Technical Support.
Reason:
This message is the first of a group of messages that are issued when an abend occurs in the Generic Data Transfer API, NM000FGX. The complete set of messages is:
RFGE06 ABEND AT +nnnn IN xxxxxxxx xxxx LEVEL xxxxxx
RFGE07 R1 at entry=xxxxxxxx, Event add=xxxxxxxx, RcvID=xxxxxxxx, XfrID:xxxxxxxxx--xxxxx, Type:x
RFGE08 PSW=xxxxxxxx xxxxxxxx INT=xxxxxxxx
RFGE09 R0-R3 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
RFGE09 R4-R7 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
RFGE09 R8-R11 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
RFGE09 R12-R15 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
Message RFGE06 identifies the abend offset, module, version, and level.
Message RFGE07 identifies the parameters passed by the caller:
R1 at entry is the value in R1 when the API was called.
Event add is the address of the Generic Event record.
RcvID is the receiver ID from which Generic Events can be received. If either R1 or the event address was invalid, this is shown as ????????.
Xfrid is the first 16 characters of the Transfer ID. If either R1 or the event address was invalid, this is shown as ????????????????.
Type is the Generic Event type. If either R1 or the event address was invalid, this is shown as ?.
Message RFGE08 identifies the failing PSW and program interruption information.
Messages RFGE09 identify the general purpose registers at the time of the abend.
System Action:
The Generic Event is ignored, and processing continues.
User Action:
Check and correct the calling module.
If the problem is not in the calling module, then Contact Technical Support. Ensure that you have the following information available:
- The entire group of messages (RFGE06 to RFGE09)
- The assembly listing of the caller module.
Reason:
This message is one of a group of messages that are issued when an abend occurs in the Generic Data Transfer API, NM000FGX.
R1 at entry is the value in R1 when the API was called.
Event add is the address of the Generic Event record.
RcvID is the receiver ID from which Generic Events can be received. If either R1 or the event address was invalid this is shown as ????????.
Xfrid is the first 16 characters of the Transfer ID. If either R1 or the event address was invalid, this is shown as ????????????????.
Type is the Generic Event type. If either R1 or the event address was invalid, this is shown as ?.
For more information, see the help for message RFGE06.
System Action:
See RFGE06.
User Action:
See RFGE06.
Reason:
This message is one of a group of messages that are issued when an abend occurs in the Generic Data Transfer API, NM000FGX.
For more information, see the help for message RFGE06.
System Action:
See RFGE06.
User Action:
See RFGE06.
Reason:
This message is the last of a group of messages that are issued when an abend occurs in the Generic Data Transfer API, NM000FGX.
For more information, see the help for message RFGE06.
System Action:
See RFGE06.
User Action:
See RFGE06.
Reason:
The Generic Data Transfer API, NM000FGX, requested the services of the event delivery facility, but the request was rejected because the event delivery facility could not obtain storage (R0=7 and R15=28 returned from $NMXEVNT).
System Action:
The Generic Event is not sent to the event receiver.
User Action:
Contact Technical Support.
Reason:
The Generic Data Transfer API, NM000FGX, was unable to obtain or free up working storage. P1 is the failing request, and P2 is a code that indicates the reason of the failure.
System Action:
The request cannot be processed.
User Action:
Use the R15 code to determine the cause of the error.
Reason:
A Generic Data Transfer API file transfer has started:
- P1 identifies the transfer as Unique transfer ID.
- P2 is the initiator user Id and P3 is the initiator node.
This message is followed by RFGEEV02 which provides additional details.
System Action:
None.
User Action:
None.
Reason:
A Generic Data transfer API file transfer has started:
- P1 identifies the transfer as the transfer ID.
- P2 is source node and P3 is the target node.
This message follows message RFGEEV01.
System Action:
None.
User Action:
None.
Reason:
A Generic Data Transfer API file transfer has completed successfully:
- P1 identifies the transfer as a Unique transfer ID.
- P2 is source node and P3 is the target node.
System Action:
None.
User Action:
None.
Reason:
A notification has been received from Generic Data Transfer API, indicating a failed file transfer:
- P1 identifies the transfer as a Unique transfer ID.
- P2 is source node and P3 is the target node.
This message is followed by RFGEEV11 which provides error details.
System Action:
None.
User Action:
None.
Reason:
A non-orderly GENAPI shutdown notification was received from P1 .
System Action:
A file transfer failure event will be raised for each currently active GENAPI transfer (if any).
User Action:
If desired, restart the GENAPI application.
Reason:
The region received a file transfer completion event for the P1 file transfer but never received the corresponding START event.
System Action:
The region will create a dummy START event for this file transfer. Processing continues.
Important! The created START event uses data from the END event. The start time, the user name, and the transfer rate might be incorrect.
User Action:
None.
Reason:
A Generic Data Transfer API file transfer failed, but no error message was received from the Generic Event API region.
System Action:
None.
User Action:
Review the system log and check the User Product region to determine the cause of the failure.
Reason:
A non-orderly GENAPI shutdown notification was received from P1 .
System Action:
A file Transfer FAILURE event is raised.
User Action:
You may want to review the reasons for the GENAPI termination.
Reason:
A notification has been received from the GENAPI, indicating a failed file transfer:
- P1 identifies the transfer as a Unique transfer ID.
- P2 is error text.
This message follows message RFGEEV05.
System Action:
None.
User Action:
None.
Reason:
This is a warning message and notifies you that P1 of the Start Event pool allocated in the GE API parameter group is being used. This may be because END or FAILURE Events are not being passed for all START Events.
System Action:
Event processing continues.
User Action:
Monitor these messages and associated alerts, if the problems persists ensure that Start Events have corresponding End or Failure Events. You can issue FTMGEST at the command prompt to view detail of START Events yet to be processed by the Generic Data Transfer API Event Manager.
Reason:
The START Event Pool is 100% Utilized. The Event is lost. P1 provides detail of the event.
System Action:
Event processing continues.
User Action:
Ensure the GENAPI is passing END/FAILURE events for all processed start events. Use the FTGESTAT command to view details of all current start events yet to be processed by the GENAPI Event Manager.
Reason:
The Generic Data Transfer API Event Manager procedure has failed because of an internal system error. P1 is the reason for the failure.
System Action:
The procedure terminates.
User Action:
Contact Technical Support.
Reason:
The Generic Data Transfer API Event Manager did not receive a Start Event for a transfer and no Start Date was specified in the End Event. The End Event is generated with the Start Date being equal to the end time.
System Action:
The event is processed.
User Action:
Correct the data passed by the Generic Data Transfer API from your data transfer application.
Reason:
The Generic Data Transfer API Event Manager did not receive a Start Event for a transfer and no Start Date was specified in the End Event. The End Event is generated with the Start Date equal to the end time.
System Action:
The event is processed.
User Action:
Correct the data passed by the Generic Data Transfer API from your data transfer application.
Reason:
The Generic Data Transfer API Event Manager procedure has encountered a recoverable error. Check previous messages for the cause of the error.
System Action:
Event processing continues. However, some events may have been lost.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message
- Relevant activity log messages
- Generic Application log messages
Reason:
The Generic Data Transfer API Event Manager procedure has failed due to an MDO error. The failure is identified by the following:
- Statement type, ASSIGN
- MDO return code, P1 =&ZMDORC
- MDO feedback code, P2 =&ZDMOFDBK
- Map name, P3 =&ZMDOMAP - Full map component name, P4 =&ZMDONAME
- Map component tag value, P5 =&ZMDOTAG
- ASN.1 type of the component, P6 =&ZMDOTYPE
System Action:
This message is written to the activity log and is followed by a series of messages (DD9003, DD9004, DD9006, and DD9007), which display the event in dump format. The event is ignored.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message
- Record dump
It is suggested that the information be obtained immediately as follows:
1. Locate the message and dump in the activity log.
2. Use the PRINT START and PRINT END commands to mark the lines. See the activity log help if you do not know how to do this. Ensure that the marked text contains this error message and the entire record dump (that is, up to and including the DD9007 message).
3. Use the PRINT command to print the marked section of the log.
Note: If you use a 3270 terminal emulator and choose to print the diagnostics by using the "cut and paste" procedure, ensure that you include an image where you scroll right to capture the end of this message.
Reason:
The Generic Data Transfer API Event Manager procedure has failed due to a data error in the event received from you data transfer application. The error is indentified by the following:
- Line number, P1 , and procedure name, P2 , where the error occurred
- Subroutine name, P3 , if applicable
- Error condition raised, P4
- Verb operand that has detected the error, P5 , if applicable
- Statement text where the error occurred, P6
System Action:
This message is written to the activity log and is followed by a series of messages (DD9003, DD9004, DD9006, and DD9007), which display the event in dump format. The event is then ignored.
If file transfer logging is active, it is also written to the file transfer log.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message
- Record dump
It is suggested that the information be obtained immediately as follows:
1. Locate the message and dump in the activity log.
2. Use the PRINT START and PRINT END commands to mark the lines. See the activity log help if you do not know how to do this. Ensure that the marked text contains this error message and the entire record dump (that is, up to and including the DD9007 message).
3. Use the PRINT command to print the marked section of the log.
Note: If you use a 3270 terminal emulator and choose to print the diagnostics by using the "cut and paste" procedure, ensure that you include an image where you scroll right to capture the end of this message.
Reason:
The message displays a file transfer event trace record. P1 is the trace ID, and P2 is the trace text.
System Action:
None.
User Action:
Contact Technical Support.
Reason:
The Generic Data Transfer API Event Manager could not process an event. This results in the loss of the event.
P1 describes the field in error.
System Action:
The event is discarded.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message
- Generic Application message log
Reason:
The Generic Data Transfer API Event Manager could not process an event.
P1 describes the field in error.
MDO information follows the message.
System Action:
The event is discarded.
User Action:
Correct the Event Type information passed by the Generic Data Transfer API from your data transfer application.
If the problem cannot be rectified contact Technical Support, making available the following diagnostic information:
- Full text of this message
- Generic Application message log
Reason:
The Generic Data Transfer API Event Manager cannot process a value received from your data transfer application.
P1 describes the field in error.
MDO information follows the message.
System Action:
The event is processed.
User Action:
Correct the data passed by the Generic Data Transfer API from your data transfer application.
If the problem cannot be rectified, contact Technical Support with the following diagnostic information:
- Full text of this message
- Generic Application message log
Reason:
No Generic Data Transfer Application API Event data is available.
System Action:
None.
User Action:
None.
Reason:
There is no active transfer event data available for product P1 .
System Action:
None.
User Action:
None.
Reason:
The delete of ACTIVE Transfer P1 failed. The transfer is no longer active.
System Action:
Delete processing fails.
User Action:
Press F6 (Refresh) to ensure that the selected transfer is available.
If the problem persists, contact Technical Support.
Reason:
The delete of ACTIVE Transfer P1 was successful.
System Action:
None.
User Action:
None.
Reason:
The delete of all Event Data for Product ID P1 is successful.
System Action:
None.
User Action:
None.
Reason:
The Generic Data Transfer API FTGESTAT Command Display Procedure failed due to an MDO error. The failure is identified by the following:
System Action:
This message is written to the activity log and is followed by a series of messages (DD9003, DD9004, DD9006, and DD9007), which display the event in dump format. The event is ignored.
User Action:
Contact Technical Support with the following diagnostic information:
We recommend that you obtain the information immediately as follows:
Note: If you use a 3270 terminal emulator and print the diagnostics using the cut and paste procedure, ensure that you include an image where you scroll right to capture the end of this message.
Reason:
The Generic Data Transfer API Event Manager procedure is not active or is no longer profiled to accept ACTIVE Transfer deletion requests.
System Action:
Delete processing is aborted.
User Action:
Contact Technical Support.
Reason:
A list of CDMON Templates was presented for generation of Monitor resources, but the list was exited without any being selected.
System Action:
No Monitor resources are generated.
User Action:
If Monitor resources are to be generated, select the template(s) on which these resources will be modelled by entering s beside them.
Reason:
The field P1 is required and must not be null.
System Action:
Field is set in error.
User Action:
Specify a value for P1 .
Reason:
The file P2 could not be allocated or unallocated or the process timed out. P1 indicated if the action was to allocate the file P2 or to unallocate it.
System Action:
Processing terminates.
User Action:
Check the activity log for messages that may indicate why the process timed out. Retry by actioning the parameter group.
Reason:
This region includes the capability to send data to ReportCenter, but this function is not yet activated. Until it is, the Send Event Rate Data to ReportCenter field must remain set to NO.
This message occurs if the REPORTDATA or REPORTCENTER parameter group is present In this region but has never been updated.
The ReportCenter data feed will remain dormant until either of these groups is updated and actioned.
System Action:
None.
User Action:
If you have not or do not want to implement the ReportCenter feature, leave this field set to NO.
If you want to enable this region to send data to ReportCenter, you must update and action the REPORTDATA or the REPORTCENTER parameter group, whichever is present In this region.
Implement the ReportCenter control region and the ReportCenter Java Task first to ensure that there is an application to receive the data feed.
Note: For more information on ReportCenter implementation, see the ReportCenter Guide.
If you do not implement ReportCenter, you can still see example reports at the following URL:
http://?your-host-and-port/public/reports/reportexpo.esp
?your-host-and-port is the IP address of this system and the port number of your WebCenter web interface port
Example: http://192.168.66.44:8744/public/reports/reportexpo.esp
Reason:
The field P1 is required if the field P2 is specified.
System Action:
The field is set in error.
User Action:
Specify a value for P1 , or blank out the value for P2 .
Reason:
When customizing a parameter group that allows for multiple occurrences of an item, you entered a value, P1, in a field; however, the value is in use by another field of the same type. This is invalid because values must be unique.
For example, when defining the file transfer logs, you can enter details for up to seven log files. The file IDs and the data set names must be unique. This message is issued if a file ID or a data set name that matches an existing entry is entered.
System Action:
Field is set in error.
User Action:
Specify a unique value.
Reason:
The field P1 is required and must not be null.
System Action:
Field is set in error.
User Action:
Specify a value for P1 .
Reason:
The file transfer log file with ID P1 was not allocated because the key length of the file was invalid. The key length of the file was P2 , but it should have a length of 22.
System Action:
The log file is not available for use.
User Action:
Review the $RF FTLOGS parameter group. Ensure that the correct dataset name is specified.
If the name is incorrect, change it to the correct dataset name.
If the name is correct, this indicates that the VSAM cluster was not defined correctly. Use Access Method Services to delete and redefine the cluster, ensuring that a key length of 22 is specified.
When you have corrected the problem, action the $RF FTLOGS parameter group.
Reason:
There was an error during the allocation of file FTSCHD in ICS Parameter Group FTSCHD. The key length shown in P1 is incorrect.
System Action:
None.
User Action:
The correct key length should be 46. Ensure that file FTSCHD has been allocated with a key length of 46.
Reason:
There was an error during the allocation of file FTSCHD in ICS parameter group FTSCHD.
System Action:
None.
User Action:
Refer to previous messages in the log to correct this error.
Reason:
The $RF FTLOGS parameter group has specified that file transfer logging is not required.
System Action:
If file transfer logging is currently enabled, the existing file transfer log procedure is flushed. The file transfer log files are not unallocated and may still be viewed.
User Action:
File transfer logging may be reactivated by updating the $RF FTLOGS parameter group to specify that logging is now required and then activating the updated group.
Reason:
The specified file ID, P1 , is invalid. File IDs for file transfer logs must be of the following form:
- A fixed prefix (FTLOG)
- A two digit numeric suffix (01 through 10)
The file ID must be in the range P2 through P3 .
System Action:
Field is set in error.
User Action:
Correct the file ID to conform to the required format.
Reason:
No file transfer log files were allocated because of errors. Logging cannot be enabled until at least one file transfer log file is available for logging.
System Action:
File transfer logging is disabled.
User Action:
From the Customizer : Parameter Groups panel (/PARMS), enter L beside the FTLOGS parameter group to view the messages relating to this group. Use the messages to determine the reason for the error. Correct the situation, then action the group to reactivate the logging function. File it when its parameters are set successfully.
Reason:
One or more, but not all, file transfer log files were successfully allocated, and logging has started. Additional messages are written to the initialization log.
System Action:
File transfer logging continues with those logs that were successfully allocated.
User Action:
From the Customizer : Parameter Groups panel (/PARMS), enter L beside the FTLOGS parameter group to view the messages relating to this group. Use the messages to determine the reason for the error. Correct the situation, then action the group to reactivate the logging function. File it when its parameters are set successfully.
Reason:
There was an error during the delete of a record from file FTSCHD in ICS Parameter Group FTSCHD. The File Return Code is shown in P1 and the VSAM Feedback Code is shown in P2.
System Action:
None.
User Action:
Investigate the VSAM Feedback Code and take the appropriate action.
Reason:
When disabling schedule logging in ICS parameter group FTSCHD the number of records specified by P1 were deleted from file FTSCHD.
System Action:
None.
User Action:
None.
Reason:
The event receiver identified by P1 has status indicated by P2 .
System Action:
None.
User Action:
None.
Reason:
The region is unable to activate the FTP event receiver at this time because it is not connected to an SSI region. The SSI region is required for FTP event delivery.
System Action:
Activation of the FTPCNTL parameter group fails.
User Action:
Check the SSI parameter group. Ensure that a value has been specified in the Sub- System Interface ID field and that the specified SSI is set up to provide EndPoint Servies (EPS). Activate the SSI parameter group, then reactivate the FTPCNTL parameter group.
Reason:
An attempt to activate the FTP event receiver has failed. More information can be found in the activity log.
System Action:
None.
User Action:
Check the activity log for further information.
Reason:
An attempt to activate the FTP event receiver has been initially unsuccessful.
System Action:
Activation will be retried at regular intervals until it succeeds.
User Action:
This situation may occur if the SSI region is unavailable at the time the receiver is activated. Check that the SSI region is available.
Reason:
This region includes the capability to send data to ReportCenter. The procedure to collect file transfer event rate data and forward it to the ReportCenter database has been started.
System Action:
File Transfer reporting data collection will commence.
User Action:
If this is the very first start of this region, ensure that either the REPORTDATA or REPORTCENTER parameter group has also been correctly updated and actioned. If this is not the case, update and action the group immediately.
This region will include the REPORTCENTER group if it has been set up to be the ReportCenter Control Region, otherwise it will include the REPORTDATA group. These groups provide the underlying infrastructure to send data to ReportCenter. The REPORT* group on this region must have been successfully actioned before any data can be sent.
The EVENTLOG group controls the generation of file transfer report data at an application level, but is not concerned with its transportation.
Reason:
The procedure to collect file transfer data and forward it to the ReportCenter database has been stopped.
System Action:
File transfer data collection for ReportCenter is disabled. No reporting data will be produced until data collection is restarted.
User Action:
To ensure continuity of report data, if you are using the ReportCenter file transfer reports, data collection should run continually.
Data collection should generally only be stopped for environmental reasons, such as the ReportCenter database being unavailable for a prolonged period of time.
For short time periods, collected data will be accumulated for sending to the database when full service resumes.
To start file transfer data collection for ReportCenter, set the "Send Event Rate Data to ReportCenter?" field in the EVENTLOG parameter group to YES, and action the group. Ensure that the REPORTCENTER or REPORTDATA group has also been correctly updated and actioned.
Reason:
This region does not include the ReportCenter component. The procedure to collect the file transfer data and forward it to the ReportCenter database has been stopped.
System Action:
None. ReportCenter functions are not available from this region.
User Action:
If you do not want to use ReportCenter, this message may be disregarded.
If you want to enable ReportCenter in this region, redo the region setup to include the ReportCenter component. This adds PROD=REPORTER to the region's U28 input parameter member.
After starting the region, you need to:
Note: For details, see the ReportCenter Guide.
Start file transfer data collection for ReportCenter. Set the Send Event Rate Data to ReportCenter? field in the EVENTLOG parameter group to YES, and action the group.
Reason:
The data set, P1 , is not defined with the properties of a P2 data set.
System Action:
Validation fails.
User Action:
Redefine the data set, or specify another data set in the input field provided. For information about the attributes of the EVNTDB and EVNTARC data sets, see the Installation and Setup Instructions.
Reason:
A generation dataset was specified for the EVNTARC dataset, but the dataset attributes are incomplete.
System Action:
Field in error is highlighted.
User Action:
Supply the required attributes.
Reason:
The value, P1 , is not a valid measure for dataset space. Valid values are CYL and TRK.
System Action:
None
User Action:
Enter one of the following values in the Space Type field:
- CYL to request that the space be allocated in cylinders.
- TRK to request that the space be allocated in tracks.
Reason:
The value, P1 , is not a valid dataset space allocation amount. The value must be numeric.
System Action:
None
User Action:
Enter a number for the space allocation amount.
Reason:
Enter either model DSCB name or SMS data class for GDG to model the new generation dataset. You cannot use model DSCBs with SMS-managed generation datasets.
System Action:
None.
User Action:
Specify either the model DSCB name or the SMS data class for GDG to model the new generation dataset, but not both.
Reason:
The automatic password option of the CDAPI parameter group requires the CONNECT:Direct user to be defined to UAMS. If the option is set to YES the system will attempt to automatically add the user to the UAMS file. If the attempt is unsuccessful this message is displayed.&P1&is the message returned by the &SECCALL ADD function.
System Action:
Message displayed. Processing allowed to continue.
User Action:
Determine why the ADD failed (the user may already be defined) and if required, correct the problem and manually add the user.
Reason:
The option is not available because the security exit is not installed.
System Action:
Message displayed. Processing is allowed to continue.
User Action:
If required, install the security exit.
Reason:
The EVENTLOG is currently in a failed state and requires the use of
P1 that contains the event records unloaded during a failure. The EVNTSEQ dataset specified is different from the dataset used for the unload of the event records.
System Action:
Message displayed. Processing is allowed to continue.
User Action:
Specify the required dataset for this field if the unloaded event records are to be used for recovery. A null value for this field will discard any previously unloaded records.
Reason:
The dataset P1 will be allocated at system initialization since a DMPRINT is in use by another dataset.
System Action:
Message displayed. Processing allowed to continue.
User Action:
None
Reason:
The parameters necessary for REORG UNLOAD are invalid. The required parameters are:
Enable Event Logging ......... NO (required)
EVNTDB Database Name ......... P1 (EVNTDB to be reorganized)
EVNTSEQ Reorg Dataset ........ sequential dataset (work dataset for REORG)
System Action:
Error message displayed. Validation is allowed to continue.
User Action:
Correct the parameters and press PF6 to initiate the REORG UNLOAD.
Reason:
The parameters necessary for REORG RELOAD are invalid. The required parameters are:
Enable Event Logging ......... YES (required)
EVNTDB Database Name ......... VSAM dataset name (must have space to at LEAST contain all the unloaded records )
EVNTSEQ Reorg Dataset ........ P1 (must be the same dataset used in the UNLOAD step)
System Action:
Error message displayed. Validation is allowed to continue.
User Action:
Correct the parameters and press F6 (Action) to initiate the REORG RELOAD.
Reason:
The parameters provided will skip REORG processing and instead attempt to format and use a new EVNTDB. The required parameters are:
Enable Event Logging ......... YES
EVNTDB Database Name ......... VSAM dataset (newly defined VSAM dataset) EVNTSEQ Reorg Dataset ........ (null value - no work dataset)
System Action:
Warning message displayed. Validation is allowed to continue.
User Action:
If reorganization is to be ignored, press F6 (Action) to start logging using the new EVNTDB, and to release the lock.
Reason:
No EVNTSEQ Reorg dataset was provided. Automatic reorganization is not possible with this setting.
System Action:
Warning message displayed. Processing continues.
User Action:
If automatic reorganization is required, provide a valid dataset for EVNTSEQ and press F6 (Action) to implement the change.
Reason:
The EVNTDB Logger failed to respond and indicate its current status.
System Action:
Processing continues.
User Action:
Check the log for possible initialization errors and take corrective action if necessary.
Reason:
An invalid field separator character was specified. The valid characters are:
` ! * - + | \ : ; < > ? / ,
The literal delimiter character TAB is also valid and internally represented as EBCDIC X'05'. If nothing is specified, the separator defaults to a comma (,).
System Action:
Processing continues.
User Action:
Specify a valid character separator.
Reason:
An attempt to action the Event Log parameter group failed because automatic reorganization of the EVNTDB is in progress.
System Action:
Request rejected.
User Action:
Check log to monitor the progress of the reorganization. Retry the action after successful completion of the reorganization process.
Reason:
The FTPCNTL parameter group disabled data space monitoring.
System Action:
Data space monitoring is disabled.
User Action:
None.
Reason:
The specified time period cannot be less than 30 seconds.
System Action:
Validation fails.
User Action:
Specify a valid time period.
Reason:
The field contains an invalid value. The only valid values are a number between 10 and 9999.
System Action:
Field is set in error.
User Action:
Specify a number between 10 and 9999.
Reason:
The EVENT DB Database name cannot be changed while event logging is set to YES.
System Action:
Error message displayed.
User Action:
To change the EVNTDB Database Name:
1- Set the Enable Event Logging field to NO.
2- Change the name of the EVNTDB.
3- Set the Enable Event Logging field to YES.
Reason:
The FTPCNTL parameter group disabled TCPaccess FTP Server event receipt.
System Action:
TCPaccess FTP Server event receipt is disabled.
User Action:
None.
Reason:
The FTPCNTL parameter group disabled Non TCPaccess event receipt.
System Action:
Non TCPaccess event receipt is disabled.
User Action:
None.
Reason:
The CONNECT:Direct Command API work file DDNAME: DMPRINT has been allocated to a temporary file.
System Action:
Processing continues.
User Action:
None.
Reason:
The CONNECT:Direct Command API work file DDNAME: DMPRINT is already allocated and will be reused.
System Action:
Processing continues.
User Action:
None.
Reason:
An internal error has occurred.
The CONNECT:Direct Command API work file DDNAME: DMPRINT cannot be allocated. P1 is the error text.
System Action:
The CONNECT:Direct Command API responses are disabled.
User Action:
Contact Technical Support with the full text of this message.
Reason:
The CONNECT:Direct Command Interface procedure was invoked for a CDMGR but was unable to ascertain the values for the NETMAP and MSGFIL datasets. The file names which could not be derived are identified by P1 while P2 identifies the CONNECT:Direct manager.
The reason for the failure could be because the INQUIRE INITPARMS command issued to CONNECT:Direct was unsuccessful or because the $RFXPRMS exit was not modified to provide the required file names.
Including the CDMGR resource's file names in the $RFXPRMS exit will bypass the need for the command API to issue the INQUIRE INITPARMS command to obtain these file names.
NB. For V1.8 of CONNECT:Direct the $RFXPRMS exit MUST be modified as this release of CONNECT:Direct does not support the INQUIRE INITPARMS command.
System Action:
The request is rejected. The interface procedure ends with return code 16.
User Action:
Update the $RFXPRMS exit to include the file names of the NETMAP and MSGFIL datasets for the nominated CDMGR resource. If running a version of CONNECT:Direct later than V1.8 the file names should be able to be dynamically extracted by use of the INQUIRE INITPARMS command. In this case check that the userid defined in the CDAPI parameter group is defined to CONNECT:Direct and has the necessary authority. Also check that the CMD clist is available in the CONNECT:Direct OPLIST dataset.
Reason:
No file transfer log files are available. Logging of file transfer details terminates.
System Action:
The file transfer log procedure terminates.
User Action:
From the Customizer : Parameter Groups panel (/PARMS), enter L beside the $RF FTLOGS parameter group and review the displayed initialization log.
If the log indicates that errors have occurred, correct them.
If the log shows no errors, enter L beside a logged message and browse the displayed activity log for related messages. Correct any errors indicated by these messages.
Reason:
No file transfer log files are available. Logging of file transfer details terminates.
System Action:
The file transfer log procedure terminates.
User Action:
From the Customizer : Parameter Groups panel (/PARMS), enter L beside the $RF FTLOGS parameter group and review the displayed initialization log.
If the log indicates that errors have occurred, correct them.
If the log shows no errors, enter L beside a logged message and browse the displayed activity log for related messages. Correct any errors indicated by these messages.
Reason:
The executing process with the specified NCL ID has been flushed to enable a log swap to take place. If a user is associated with this process (for example, the user might be browsing the log), the user region will be terminated.
System Action:
The file transfer log swap commences when there are no users.
User Action:
None
Reason:
The user, P1 , was accessing a file transfer log file for which a log swap was required. For example, the user might be browsing the log. The user region was terminated to enable the log swap to take place.
System Action:
The file transfer log swap commences when there are no users for the log file.
User Action:
None
Reason:
The NetMaster for File Transfer log procedure has been started, but there is already an active file transfer log procedure. The current procedure, with NCL ID P1 , is flushed. The new log procedure has an NCL ID of P2 .
System Action:
The old file transfer log procedure terminates, and the new log procedure runs in its place. Additional messages are written to the activity log as a result of the old log procedure being flushed.
User Action:
No action is required. This message is for information and audit trail only.
Reason:
The NetMaster for File Transfer log procedure has received an event where the date is different to the previous event (or this is the first event since the procedure was started). The procedure swaps to the file indicated in the message. (File transfer events raised on different dates are logged to different log files.)
File transfer messages are now written to the log file with file ID= P1 .
System Action:
File transfer logging continues.
User Action:
No actions are required. The message is for information and audit trail only.
Reason:
The NetMaster for File Transfer log procedure has failed to write a message to the current file transfer log file. The current file will be swapped, and logging will continue.
The failure is identified by the following:
- Current file ID, P1
- File request, P2 , that indicates either OPEN or ADD, and the NCL &FILE operation that has failed
- Key of the record, P3 (only relevant if the file request is ADD)
- File return code, P4 , which is the &FILERC value
- VSAM feedback code, P5 , in hexadecimal format (normally only relevant if the return code is 8)
- System message, P6 , if any (normally only relevant if the return code is 16)
A full file is indicated by the following conditions:
- File request is ADD. - File return code is 8. - VSAM feedback code is 1C.
System Action:
File transfer logging continues.
User Action:
If the message indicates that the file is full, no action is required as the next log file will be used. If a secure copy of the file is needed, you should arrange to copy the file before it is reset during the normal cycling of log files.
Other errors indicate problems with the region or the particular file. If a system message is included (MSG=), see to the help for that message to help you resolve the problem. If the VSAM feedback code is included (FDBK=), use the request type and feedback code to reference your VSAM reference manual and follow the problem diagnosis.
If the problem cannot be resolved, contact Technical Support.
Reason:
The log procedure for CA NetMaster FTM received a local time offset change notification.
P1 is the direction of the local time offset move; it is forward or backward.
P2 is the previous local time offset (d.hhmm - day hours minutes)
P3 is the new local time offset (d.hhmm - day hours minutes)
Note: File Transfer Log lines always display the local system time. When a backward time change occurs, for example, for daylight saving, the local system time moves back; however, log records may already be written for this time interval.
System Action:
Logging continues.
User Action:
None.
Reason:
This message is issued when an FTSMON link monitor detects an inactive link to a monitored region or a link check is requested by message RFLINK05.
P1 is the link name.
P2 is the link status.
System Action:
The monitor procedure issues message RFLINK02, which causes the related FTSMGR and FTSMON resources to change status.
User Action:
None.
Reason:
An FTSMON link monitor resource is unable to communicate with its FTSMGR resource.
P1 is the FTSMGR name.
P2 is the FTSMON name.
P3 is the time.
System Action:
The extended display of the FTSMON and FTSMGR resources is set.
User Action:
The problem can be due to the following possible causes:
- No DEFLINK command has been issued from the FTSMGR region.
To correct the problem, issue a DEFLINK command from the FTSMGR region, for example:
DEFLINK MASK=* PREFIX=link-prefix
To enable the automatic execution of the command during the startup of the FTSMGR region, include the command in the NMREADY procedure for the region.
- The BSYS user of the NetMaster for File Transfer region is not defined to the FTSMGR region.
To correct the problem, define the user to the FTSMGR region.
To detemine the user ID, issue SHOW USERS from the NetMaster for File Transfer region to display the list of logon users.
After you corrected the problem, enter CHK beside the FTSMON resource.
Reason:
An FTSMON resource has detected that its monitored link is not active.
P1 is the FTSMGR name.
P2 is the FTSMON name.
P3 is the TIME.
P4 is the LINK name.
System Action:
The EXTENDED DISPLAY of the FTSMGR and FTSMON resources is set.
User Action:
Determine the cause of the link being inactive and rectify.
Reason:
An FTSMON resource has found its monitored link to be active.
P1 is the FTSMGR name.
P2 is the FTSMON name.
P3 is the TIME.
P4 is the LINK name.
System Action:
The EXTENDED DISPLAY of the FTSMON resource is set.
User Action:
None.
Reason:
An FTSMON resource whose monitored link was previously inactive has now detected that the link is active. This message is issued to cause the FTSMGR to reset any error display and other FTSMON resources to check their links.
P1 is the FTSMGR name.
P2 is the FTSMON name.
System Action:
The FTSMGR's EXTENDED DISPLAY is reset. All other FTSMON resources check their links and set errors as appropriate.
User Action:
None.
Reason:
The heartbeat value in the resource definition was less than the minimum global value. The heartbeat value is increased automatically to P1 .
System Action:
The heartbeat value is increased automatically to the minimum value.
User Action:
None.
Reason:
The message displays a file transfer events logger trace record.
P1 is the trace ID, and P2 is the trace text.
System Action:
None
User Action:
Contact your local support representative.
Reason:
An attempt was made to start the Event Logger, but it was already running.
System Action:
The existing Event Logger continues to operate.
User Action:
None
Reason:
The Event Logger encountered an error when trying to perform a P1 command on the EVNTDB database. The return code is P2 . The Event Logger may terminate or continue processing as indicated by its status.
System Action:
The Event Logger may terminate if it cannot continue processing.
User Action:
Check the activity log for further messages indicating why the NDB error occurred. To display the log, enter the =H.L panel path.
If the NDB is full, redefine it with more space. For information about the attributes of the distributed database, see the Installation and Setup Instructions.
Reason:
The event logger received a VSAM I/O error when trying to add a record to the EVNTDB database. This is a serious error resulting in the event logger terminating. The most likely reason for this error is that the EVNTDB database is full.
System Action:
The event logger cannot continue processing and has terminated. The EVNTDB database probably has a status of BAD-LOCKED .
User Action:
Check the activity log for further messages that indicate why the I/O error occurred. To access the log, enter the =H.L path.
If the NDB is full and is marked BAD-LOCKED , you must delete and redefine the NDB. However, before doing this, if you want to extract the data currently in the NDB, perform the following steps:
1. Issue the NDB START EVNTDB UNLOCK INPUT command to open the database as input-only. If you issue this command without the INPUT option, the region will attempt to reapply the last transaction, causing the NDB to remain BAD-LOCKED .
2. Type the name of your extract dataset into the field provided on the History Data menu ( =/FTHIST ), and select option EX to start the extract process.
3. Go to the activity log ( =H.L ) for progress messages on the extract process.
4. When the extract process has finished, deallocate the EVNTDB database by issuing the following commands:
- NDB STOP EVNTDB to stop the database - UDBCTL CLOSE=EVNTDB to close the file - DEALLOC DD=EVNTDB to deallocate the file
5. After the EVNTDB database has been deallocated, submit your batch job to delete and redefine the dataset (optionally giving it more space). For information about the attributes of the distributed database, see the Installation and Setup Instructions .
6. Upon successful completion of the batch job, go to the list of parameter groups ( =/PARMS ), and enter U (Update) beside the EVENTLOG parameter group. You might want to decrease the number of days records are to be stored within the database.
7. Press F6 (Action) to action the parameters. This reinitializes the event logging environment, and the event logger should restart with no problems.
8. Press F3 (File) to save your current parameter settings and exit, or F12 (Cancel) if you do not wish to save the changes you have made.
Reason:
The event logger tried to add a record to the EVNTDB database and discovered that the database was locked. This is a serious error, and the event logger has terminated. The most likely reason for this error is that the EVNTDB database has become full.
System Action:
The event logger cannot continue processing and has terminated. The EVNTDB database is in a status of LOCKED or BAD-LOCKED.
User Action:
Check the activity log for further messages that indicate why the I/O error occurred. To access the log, enter the =H.L path.
It is uncommon for the NDB to have the LOCKED status. However, if this occurs, issue an NDB START EVNTDB UNLOCK command and then action the EVENTLOG parameter group. To access the list of parameter groups, enter the =/PARMS path.
If the NDB is full and has the BAD-LOCKED status, the only solution is to delete and redefine the NDB. However, before doing this, if you wish to extract the data currently in the NDB, perform the following steps:
1. Issue the NDB START EVNTDB UNLOCK INPUT command to open the database as input-only. If you issue this command without the INPUT option, the region will attempt to reapply the last transaction, causing the NDB to remain BAD-LOCKED .
2. Type the name of your extract dataset into the field provided on the History Data menu ( =/FTHIST ), and select option EX to start the extract process.
3. Go to the activity log ( =H.L ) for progress messages on the extract process.
4. When the extract process has finished, deallocate the EVNTDB database by issuing the following commands:
- NDB STOP EVNTDB to stop the database - UDBCTL CLOSE=EVNTDB to close the file - DEALLOC DD=EVNTDB to deallocate the file
5. After the EVNTDB database has been deallocated, submit your batch job to delete and redefine the dataset (optionally giving it more space). For information about the attributes of the distributed database, see the Installation and Setup Instructions .
6. Upon successful completion of the batch job, go to the list of parameter groups ( =/PARMS ), and enter U (Update) beside the EVENTLOG parameter group. You might want to decrease the number of days worth of records to be stored within the database.
7. Press F6 (Action) to action the parameters. This reinitializes thet event logging environment, and the event logger should restart with no problems.
8. Press F3 (File) to save your current parameter settings and exit, or F12 (Cancel) if you do not wish to save the changes you have made.
Reason:
The Event Logger tried to add a record to a full EVNTDB database and failed. The EVNTDB database reorganization process is initialized.
System Action:
Event logging is paused while the reorganization is in process.
User Action:
None
Reason:
During initialization of the Event Logger, an NDB error occured while executing an NDB command P1 . The line number in error is P2 .
System Action:
The Event Logger terminates.
User Action:
Check the activity log for further messages indicating why the NDB error occurred.
If the NDB is full, redefine it with more space. For information about the attributes of the distributed database, see the Installation and Setup Instructions.
Reason:
The Event logger initialization has completed. P1 may indicate (SUSPEND) which means that no records are being written to the EVNTDB due to errors during startup.
System Action:
Event Logger continues processing.If P1 indicates (SUSPEND) , then no records are being written to the EVNTDB.
User Action:
Check the initialization log to determine the cause of the failure if any.
Reason:
Event Logger has stopped due to P1 .
System Action:
Processing terminated.
User Action:
Review the activity log if the termination was due to an error.
Reason:
The Event Logger encountered an error when trying to gather information about the EVNTDB database. The return code is P1 . The Event Logger continues processing.
System Action:
NONE.
User Action:
Check the activity log for further messages indicating why the NDB error occurred. To display the log, enter the =H.L panel path.
Reason:
The Event Logger encountered an error when processing event data. The keyed field exceeded the maximum key length. The field data is truncated to the key length.
P1 is the field name.
P2 is the key length.
P3 is the field data.
System Action:
Message is logged and processing continues.
User Action:
Contact Technical Support and provide message details and the name of the File Transfer Product that you are monitoring.
Reason:
An NDB error has prevented records from being written to EVNTDB and has caused the logger to suspend logging.
System Action:
Logger remains active but no records are written to the EVNTDB.
User Action:
Check the initialization log to determine the cause of the failure.
Reason:
The EVNTDB has been recovered and the logger has resumed writing records to the NDB.
System Action:
Logging continues.
User Action:
None.
Reason:
An error was encountered when attempting to access a file. P1 is the operation being performed, P2 is the ID of the file, P3 is the return code, and P4 is the message set by the FILE verb.
System Action:
Event logging continues, however, File Transfer SCHEDULES logging may be interrupted.
User Action:
Contact your local support representative.
Reason:
File Transfer Schedule P1 has completed. Schedule details could not be logged as the required records could not be located in file P2 .
System Action:
Event logging continues, however, File Transfer SCHEDULES logging for schedule P1 is terminated.
User Action:
Contact your local support representative.
Reason:
While logging a file transfer event, a Source/Target Data filename's first P1 characters were truncated and the last 255 characters retained in the log record. The succeeding message RFLO8116 shows the complete filename.
System Action:
Event logging continues.
User Action:
Contact your local support representative.
Reason:
This message follows RFLO8115 message, which displays the complete Source/Target filename P2 .
System Action:
None.
User Action:
None.
Reason:
An Event Log process has started. The process extracts records from the EVNTDB event logging database and writes them in comma-delimited format to a sequential dataset. P1 indicates the type of process. If it is ARCHIVE, the records are deleted from the database.
System Action:
The indicated Event Log process starts to extract EVNTDB records.
User Action:
None
Reason:
An Event Log process has finished. The process extracts records from the EVNTDB event logging database and writes them in comma-delimited format to a sequential dataset. P1 indicates the type of process. If it is ARCHIVE, the records are deleted from the database.
System Action:
The indicated Event Log process finishes.
User Action:
None
Reason:
An error occurred during an EVNTDB P1 operation. The action being performed was P2 . The Dataset Services interface return code was P3 , and the feedback code was P4 . The dataset in use at the time of the error is shown in a following message.
System Action:
Processing terminated.
User Action:
Check the activity log for further messages to determine the cause of the error. See the Network Control Language Reference for the meaning of the Dataset Services interface feedback codes. The online Help for the N16Cxx messages (where xx is P4 ) provides possible user actions.
Reason:
An error occurred when a P1 command is being performed on the EVNTDB event logging database. The NDB return code is P2 .
System Action:
The process is placed in the displayed status, P3 .
User Action:
Determine why the NDB error occurred. Contact your System Administrator for further assistance.
Reason:
The ARCHIVE or EXTRACT procedure is starting to write to the P1 dataset. The DD name of the dataset is P2 .
System Action:
The process continues.
User Action:
None
Reason:
The Event Log ARCHIVE process is commencing the DELETE step of its processing.
System Action:
The Event Log process continues running.
User Action:
None
Reason:
The call to the procedure failed because the keyword, P1 , has an invalid value, P2 .
System Action:
The request is rejected.
User Action:
Contact your local System Administrator.
Reason:
The Event Log process did not find any records that can be extracted or archived, as indicated by P1 .
System Action:
The Event Log process terminates.
User Action:
None
Reason:
The ARCHIVE or EXTRACT process has written P1 records to the P2 dataset. The DD name of the dataset is P3 .
System Action:
The process continues.
User Action:
None
Reason:
An error occurred when dataset P1 is being formatted as an NDB.
System Action:
Event logging and reporting is not made available.
User Action:
Determine why the NDB error occurred. Contact your System Administrator for further assistance.
Reason:
Your request to extract file transfer events starts the EVNTDB extract process as a background task that runs with your authority. Progress messages with the prefix RFLO82* are written to the activity log.
System Action:
The process is submitted to your background region.
User Action:
Check the activity log for progress. To access the log, enter the H.L path.
Reason:
The Event Log archive process has deleted P1 records from the EVNTDB database.
System Action:
The Event Log archive process continues running.
User Action:
None.
Reason:
Processing has finished.
P1 is the function that has been performed, either ARCHIVE or EXTRACT.
P2 is the name of the dataset.
P3 is the DD name of the dataset.
System Action:
None.
User Action:
None.
Reason:
The EVNTDB reorganization process could not continue as no sequential dataset has been defined for the reorganization.
System Action:
Reorganization processing terminates.
User Action:
Define a sequential dataset with a record length of 4096, a block size of 23445, and a record format of VB. Then add the dataset name to the EVNTSEQ Reorg Dataset field on the Event Logging Initialization Parameters panel.
To restart a failed REORG:
1. Go to the Event Logging Customizer panel (=/PARMS, Update $RF EVENTLOG).
2. Review the dataset allocation for EVNTSEQ to determine if it has enough space to hold all records from EVNTDB.
3. Set the Enable Event Logging field to NO .
4. Press PF6 to unload the data from EVNTDB to EVNTSEQ.
5. Set the EVNTDB Database Name field to a newly defined VSAM dataset. It is necessary for a new dataset name to be provided, and when appropriate increase the space allocation.
6. Set the Enable Event Logging field to YES .
7. Press PF6 to reload the data from EVNTSEQ to EVNTDB and restart event logging.
8. Review the customizer log.
Reason:
The EVNTDB reorganization process has started.
System Action:
Reorganization processing continues.
User Action:
None.
Reason:
The EVNTDB reorganization process is beginning step 1, copying all records from the EVNTDB NDB to the sequential dataset indicated by P1.
System Action:
Reorganization processing continues.
User Action:
None.
Reason:
The EVNTDB reorganization process is beginning step 2, copying all records from the sequential dataset indicated by P1 , to the EVNTDB NDB.
System Action:
Reorganization processing continues.
User Action:
None.
Reason:
This is an IDCAMS message produced by the EVNTDB reorganization process.
System Action:
Reorganization processing continues.
User Action:
None.
Reason:
The EVNTDB reorganization process has successfully finished.
System Action:
Reorganization processing has finished. NetMaster for File Transfer event logging should resume normally if the reorganization was successful.
User Action:
None.
Reason:
The EVNTDB reorganization process has failed.
System Action:
Reorganization terminates.
User Action:
Check the activity log for message ID RFLO8219, which contains the SYSPRINT output from IDCAMS, to determine the cause of the failure.
To restart a failed REORG:
1. Go to the Event Logging Customizer panel (=/PARMS), and update $RF EVENTLOG.
2. Review the data set allocation for EVNTSEQ to determine if it has enough space to hold all records from EVNTDB. For information about the data set attributes, see the Installation and Setup Instructions.
3. Set the Enable Event Logging field to NO .
4. Press F6 (Action) to unload the data from EVNTDB to EVNTSEQ.
5. Set the EVNTDB Database Name field to a VSAM data set that has enough space to contain all the unloaded records and start logging new events. For information about the data set attributes, see the Installation and Setup Instructions.
6. Set the Enable Event Logging field to YES .
7. Press F6 (Action) to reload the data from EVNTSEQ to EVNTDB and restart event logging.
8. Review the initialization log.
Reason:
EVNTDB is not available due to database maintenance. No further action is possible.
System Action:
Request is rejected.
User Action:
Retry later.
Reason:
An NDB START command for the EVNTDB completed without errors.
System Action:
None
User Action:
None
Reason:
An NDB START command for the EVNTDB failed with RC= P1 .
System Action:
Processing terminates and the EVNTDB logger is not restarted.
User Action:
To restart a failed REORG:
1. Go to Event Logging customizer panel (=/PARMS), and update $RF EVENTLOG.
2. Review the data set allocation for EVNTSEQ to determine if it has enough space to hold all records from EVNTDB.
3. Set the Enable Event Logging field to NO .
4. Press F6 (Action) to unload the data from EVNTDB to EVNTSEQ.
5. Set the EVNTDB Database Name field to a VSAM data set that has enough space to contain all the unloaded records and start logging new events.
6. Set the Enable Event Logging field to YES .
7. Press F6 (Action) to reload the data from EVNTSEQ to EVNTDB and restart event logging.
8. Review the initialization log.
Reason:
The EVNTDB could not be processed because an NDB START command has not been issued or has failed.
System Action:
Processing terminates.
User Action:
Check the initialization log to determine the appropriate action.
To restart a failed REORG:
1. Go to Event Logging customizer panel (=/PARMS), and update $RF EVENTLOG.
2. Review the data set allocation for EVNTSEQ to determine if it has enough space to hold all records from EVNTDB.
3. Set the Enable Event Logging field to NO .
4. Press F6 (Action) to unload the data from EVNTDB to EVNTSEQ.
5. Set the EVNTDB Database Name field to a VSAM data set that has enough space to contain all the unloaded records and start logging new events.
6. Set the Enable Event Logging field to YES .
7. Press F6 (Action) to reload the data from EVNTSEQ to EVNTDB and restart event logging.
8. Review the initialization log.
Reason:
An NDB STOP command for the EVNTDB failed with RC= P1 .
System Action:
Processing terminates, and the EVNTDB logger is not restarted.
User Action:
To restart a failed REORG:
1. Go to Event Logging customizer panel (=/PARMS), and update $RF EVENTLOG.
2. Review the data set allocation for EVNTSEQ to determine if it has enough space to hold all records from EVNTDB.
3. Set the Enable Event Logging field to NO .
4. Press F6 (Action) to unload the data from EVNTDB to EVNTSEQ.
5. Set the EVNTDB Database Name field to a VSAM data set that has enough space to contain all the unloaded records and start logging new events.
6. Set the Enable Event Logging field to YES .
7. Press F6 (Action) to reload the data from EVNTSEQ to EVNTDB and restart event logging.
8. Review the initialization log.
Reason:
The EVNTDB reorganization initialization has started.
System Action:
None
User Action:
None
Reason:
An NDB PURGE command for the EVNTDB failed with RC= P1 .
System Action:
Processing terminates, and the EVNTDB logger is not restarted.
User Action:
To restart a failed REORG:
1. Go to Event Logging customizer panel (=/PARMS), and update $RF EVENTLOG.
2. Review the data set allocation for EVNTSEQ to determine if it has enough space to hold all records from EVNTDB.
3. Set the Enable Event Logging field to NO .
4. Press F6 (Action) to unload the data from EVNTDB to EVNTSEQ.
5. Set the EVNTDB Database Name field to a VSAM data set that has enough space to contain all the unloaded records and start logging new events.
6. Set the Enable Event Logging field to YES .
7. Press F6 (Action) to reload the data from EVNTSEQ to EVNTDB and restart event logging.
8. Review the initialization log.
Reason:
Event Logging was not started due to errors during P1 processing.
System Action:
Error messages are written to the initialization log, and the process is terminated.
User Action:
Check the cause of the error from the log entries and determine the appropriate action.
To restart a failed REORG:
1. Go to Event Logging customizer panel (=/PARMS), and update $RF EVENTLOG.
2. Review the data set allocation for EVNTSEQ to determine if it has enough space to hold all records from EVNTDB. For information about the data set attributes, see the Installation and Setup Instructions.
3. Set the Enable Event Logging field to NO .
4. Press F6 (Action) to unload the data from EVNTDB to EVNTSEQ.
5. Set the EVNTDB Database Name field to a VSAM data set that has enough space to contain all the unloaded records and start logging new events. For information about the data set attributes, see the Installation and Setup Instructions.
6. Set the Enable Event Logging field to YES .
7. Press F6 (Action) to reload the data from EVNTSEQ to EVNTDB and restart event logging.
8. Review the initialization log.
Reason:
The EVNTDB REORG P1 step completed without errors.
System Action:
Reorganization processing continues.
User Action:
None
Reason:
The EVENT LOG archive/extract process has failed.
System Action:
Processing terminates.
User Action:
Check the EVNTDB Initialization Log for details of the failure and determine the appropriate action.
Reason:
The EVNTDB Logger failed to respond and indicate its current status.
System Action:
Processing continues.
User Action:
Check the log for possible initialization errors and take corrective action if necessary.
Reason:
During initialization it was determined that a reorganization had been performed in the last 24 hours. This indicates that the EVNTDB may not have enough space, and repeated reorganizations will have no effect.
System Action:
Reorganization aborted.
User Action:
Review the initialization log to determine the time of the last reorganization and determine the current usage of the EVNTDB using IDCAMS. If necessary allocate more space for the EVNTDB.
Reason:
Processing has failed.
P1 is the function that has been performed, either ARCHIVE or EXTRACT.
P2 is the name of the dataset.
P3 is the DD name of the dataset.
System Action:
Processing terminated.
User Action:
See message RFLO8203 or the succeeding N16Cxx messages for possible user actions.
Reason:
During EVNTDB START or automatic REORG, it was determined that the current dataset is no longer usable. An attempt was made to backup and rename the current EVNTDB but the new name is already in use. The backup dataset name would have the format:
&ZDNSQLCL.&ZJOBNAME.EVNTDB.annnv
where:
&ZDNSQLCL = value of the local dataset qualifier as set in the DSNQLCL JCL parameter &ZJOBNAME = jobname of the NetMaster region a = is an alphabetic character from A to J and is indexed by the last digit of the current year + 1 nnn = current Julian day v = version number from 0 to 9
System Action:
Processing terminates with the logger processing in SUSPEND mode.
User Action:
Specify a new EVNTDB dataset in the EVENTLOG parameter panel.
Reason:
The VSAM DATA and INDEX component names of the current EVNTDB could not be determined from an IDCAMS LISTCAT.
System Action:
Processing terminates with the logger processing in SUSPEND mode.
User Action:
Specify a new EVNTDB dataset in the EVENTLOG parameter panel.
Reason:
This is an IDCAMS message produced during renaming of the EVNTDB.
System Action:
Processing continues.
User Action:
None.
Reason:
During EVNTDB START or automatic REORG, it was determined that the current dataset is no longer usable. An attempt to define a new EVNTDB dataset failed.
System Action:
Processing terminates with the logger processing in SUSPEND mode with no records being logged.
User Action:
Review the initialization log to determine the cause of the failure or specify a new EVNTDB dataset form the EVENTLOG parameter display panel.
Reason:
The EVNTDB dataset has been RENAMED or RESTORED to P1 .
System Action:
Processing continues.
User Action:
None.
Reason:
The EVNTDB is being resized. The new size is determined by the product of the average record length and the total number of records rounded up the the next megabyte.
System Action:
Processing continues with records being cached during resizing.
User Action:
None.
Reason:
The EVNTARC archive data set cannot be created because the specified SMS Data Class P1 does not exist or does not contain the required attributes to create the data set.
System Action:
Processing of event records terminates.
User Action:
Consult the storage administrator to determine the SMS Data Class to use or specify override values for the data set attributes in the customizer panels (/PARMS) for the EVENTLOG parameter group. When using an SMS Data Class, the following values must be specified:
- AVGREC
- AVG VALUE
- SPACE PRIMARY
- SPACE SECONDARY
For more information about defining an SMS Data Class, see z/OS DFSMS: Using the Interactive Storage Management Facility.
Reason:
Initialization for event logging is incomplete because the supplied data set is not compatible with the current release of the product.
System Action:
Logging continues without an event log data set.
File transfer events are not logged.
User Action:
Ensure that you are using the Event Log data set defined by the region Setup JCL (member S01LCALC).
Reason:
An attempt was made to start the EVNDTB Monitor, but it is already running.
System Action:
Processing terminates.
User Action:
None
Reason:
An attempt to query the status of the EVNTDB failed bacause it is not allocated or the Event Logger was disabled.
System Action:
Processing terminates.
User Action:
Review the initialization log to determine why logging has been stopped.
Reason:
Automatic EVNTDB reorganization processing has failed.
System Action:
Process terminates and re-scheduled at the next monitoring cycle.
User Action:
Review the EVENTLOG Initialization log to determine the cause of the failure.
Reason:
The EVNTDB P1 component currently has a space of utilization of P2 .
System Action:
The EVNTDB Monitor continues processing.
User Action:
None
Reason:
The EVNTDB Monitor determined that no significant space was reclaimed after an Automatic REORG was performed. The DU( P1 ) and IU( P2 ) values display the Data and Index utilization respectively after completion of a REORG.
System Action:
Processing continues. In the next monitoring cycle, EVNTDB Monitor will not attempt to do an automatic REORG until the utilization falls below P3 percent
User Action:
Review space utilization. If necessary, reallocate the EVNTDB with more space or schedule an ARCHIVE to delete old records.
Reason:
The EVNTDB Monitor failed to initialize since it was not enabled.
System Action:
Processing terminates.
User Action:
ENABLE logging from the EVENTLOG Initialization Parameters. If the situation persists, call your local support.
Reason:
EVNTDB Automatic Reorg has determined that the last executiion did not alleviate the EVNTDB full condition. A new reorganization will not be scheduled.
System Action:
Processing terminates and logging remains inactive.
User Action:
Schedule an archive to delete old records or allocate more space to the EVNTDB.
Reason:
You selected an Event Logging and Reporting option, but the feature has not been configured.
System Action:
The selected option is not processed.
User Action:
Review the EVENTLOG parameter group. Ensure that logging is enabled. To list the parameter groups, enter the /PARMS shortcut.
Reason:
The event logging database (EVNTDB NDB) is in a status of P1 and is not available for reporting.
System Action:
The selected report is not processed.
User Action:
In the EVENTLOG parameter group, ensure that the value of Enable Event
Logging is YES and action the group to make the EVNTDB database available for reporting. To list the groups, enter the /PARMS shortcut.
If the database is still not available, check the activity log for further error messages. To display the log, enter the =H.L panel path.
Reason:
There were no File Transfer event records in the EVNTDB for the selected Schedule or File Filter Entry.
System Action:
None.
User Action:
None.
Reason:
EVNTDB is not available due to database maintenance. No further action is possible.
System Action:
Request is rejected.
User Action:
Retry later.
Reason:
An error occurred getting a record from the NDB while building the list. The NDB return code was P1 .
System Action:
Selection List terminates.
User Action:
To determine the appropriate action, check the following:
- EVENTLOG in the initialization log
- Return code
Reason:
A request to present an Events List failed because an error was encountered allocating a variable table. The request was P1 , the identifier of the variable table was P3 , and the feedback code was P2 .
System Action:
The request is rejected.
User Action:
Interpret the feedback code using the NCL Reference.
Reason:
A request to present an Events List failed because an error was encountered accessing a variable table. The request was P1 , the identifier of the variable table was P3 , the feedback code was P2 , and the key value used was P4 .
System Action:
The request is rejected.
User Action:
Interpret the feedback code using the NCL Reference.
Reason:
An invalid value has been given for keyword P1 .
System Action:
The request is rejected and the procedure is terminated.
User Action:
Contact your system administrator.
Reason:
EVNTDB is not available due to database maintenance. No further action is possible.
System Action:
Request is rejected.
User Action:
Retry later.
Reason:
No records found for the selected entry.
System Action:
None
User Action:
None
Reason:
The Summary Reports Service Procedure received an error when trying to perform a P1 command on the EVNTDB database. The NDB response code is
P2 and the NDBERRI information is P3 .
System Action:
The report request is terminated.
User Action:
Contact your system administrator for assistance.
Reason:
The Summary Reports Service Procedure received an error when executing a call to the CAS Programming Interface ($CACALL). P1 is the purpose of the call, P2 is the name of the entity requested and P3 is the Feedback Code (Return Code). If P3 is 1 then entity P2 does not exist.
System Action:
The report request is terminated.
User Action:
Contact your system administrator for assistance.
Reason:
A request to present a Report List failed because an error was encountered allocating a variable table. The request was P1 , the identifier of the variable table was P3 , and the feedback code was P2 .
System Action:
The request is rejected.
User Action:
Interpret the feedback code using the NCL Reference.
Reason:
A request to present a Report List failed because an error was encountered accessing a variable table. The request was P1 , the identifier of the variable table was P3 , the feedback code was P2 , and the key value used was P4 .
System Action:
The request is rejected.
User Action:
Interpret the feedback code using the NCL Reference.
Reason:
A request to present a Report List failed because there were no reports defined within the range specified.
System Action:
The request is rejected.
User Action:
None.
Reason:
The selection of a report from the Report List failed because the report was deleted by another user since the Report List was displayed. The name of the report selected was P1 .
System Action:
The selection of the report is rejected.
User Action:
None.
Reason:
An invalid value has been given for keyword P1 .
System Action:
The request is rejected and the procedure is terminated.
User Action:
Contact your system administrator.
Reason:
A heartbeat procedure for the file transfer resource listener port is initiated.
P1 is the SNMP host name.
P2 is the SNMP community name.
P3 is the port number which the listener should be on.
P4 is the number of retry attempts.
P5 is the interval, in seconds, between each retry.
System Action:
None.
User Action:
None.
Reason:
The file transfer resource listener port monitor is invoked without one of the necessary parameters. P1 identifies the missing parameter.
System Action:
Heartbeat processing is terminated.
User Action:
Update the definition of the affected resource, and specify the missing parameter.
Reason:
The file transfer resource listener port monitor has found the active listener port.
P1 identifies the owning file transfer resource.
P2 displays the name of the monitor resource.
P3 is the listener port
P4 is the time.
System Action:
None.
User Action:
None.
Reason:
The file transfer application requires an active listener port to receive requests for connection. The required listener port was not found or was not in a LISTEN state.
P1 identifies the owning file transfer resource.
P2 is the name of the monitor resource.
P3 is the time.
System Action:
None.
User Action:
Perform one or more of the following to investigate the problem:
- Check the transient log of the monitor resource for additional details.
- If the port number of the file transfer application is specified on the Monitor Details panel of the resource definition, check its accuracy.
- Check the current state of the file transfer application, P1 .
- Check the current state of the TCP/IP region.
Reason:
The TCP/IP interface is currently P1 s. To verify the current status of the listener port, the status of the TCP/IP interface must be ACTIVE.
System Action:
Heartbeat processing does not take place.
User Action:
Display the current TCP/IP services status by issuing a SHOW TCPIP command. Message N3AF05 shows the current TCP/IP INTERFACE status.
If the TCP/IP INTERFACE status is INACTIVE - Issue a TCPIP START command. Wait for message N3B201 and then enter a CHK command against this resource.
If the TCP/IP INTERFACE status is QUIESCING or STOPPING - wait for the STATUS to change to INACTIVE and proceed as above.
If the TCP/IP INTERFACE status is STARTING - Wait for message N3B201 and then enter a CHK command against this resource.
Reason:
This is an informational message issued by the TCP/IP Listener monitor for each connection found until the Listener is found.
P1 identifies the local port.
P2 is the connection status.
P3 is the connection id.
System Action:
None
User Action:
None
Reason:
The action described in P1 could not be performed on the TCP/IP socket. The Feedback Code P2 , Error Number P3 and/or Vendor Error P4 are displayed for further diagnosis.
System Action:
The procedure terminates with a return code of 12.
User Action:
See the NCL Reference for suggested actions that pertain to feedback code ZFDBK.
Reason:
The encoding of data from EBCDIC to ASCII failed. Refer to the additional details found in P1 for further information.
System Action:
The procedure terminates with a return code of 12.
User Action:
Take actions as indicated by the additional details.
Reason:
The SOCKET action that failed is described in P1 . P2 through P6 contain the return, error, and feedback codes that can assist with problem diagnosis. A RECEIVE which times out (RC=4) could indicate that the user is not authorized to access SNMP, that SNMP is not active, or possibly the Community name is invalid.
System Action:
The procedure terminates with a return code of 12.
User Action:
See the NCL Reference for suggested user actions that pertain to feedback code ZFDBK.
Reason:
This message is the response to a D command against a file transfer listerner port monitor resource.
P1 identifies the owning file transfer resource.
P2 is the name of the file transfer listener port monitor resource.
P3 is the TCP/IP port number P1 uses for TCP/IP access.
P4 is the state of P3 . This is the tcpConnState value as described by the SNMP Working Group's RFC 1213.
System Action:
None.
User Action:
None.
Reason:
The response received form the listener contained an unexpected error status P1 . The error index was P2 .
System Action:
The procedure terminates with a return code of 12.
User Action:
Analyze the error status and error index codes to determine what corrective actions to perform.
Reason:
The TCP/IP connections monitor was unable to ascertain the TCP/IP port number used by file transfer resource manager, P1 .
System Action:
Monitoring fails.
User Action:
This only applies when TCPaccess Version 4.1 is being used.
For a CONNECT:Direct resource, the port number is either obtained automatically from CONNECT:Direct or provided in user exit $RFXPRMS. One possible problem is that an old version of $RFXPRMS is executed.
For an FTP resource, the port number must be specified in the resource definition.
Reason:
The response received from SNMP did not contain any data. However, no error status was returned.
System Action:
The procedure terminates with a return code of 12.
User Action:
This error condition indicates a problem with the SNMP services on the resource being monitored. Report the problem to your resource administrator.
Reason:
A heartbeat procedure for the file transfer resource listener port is initiated.
P1 is the name of the manager for the file transfer product
P2 is the TCP/IP software type
P3 is the TCP/IP software version (if available)
System Action:
None.
User Action:
None.
Reason:
The heartbeat procedure for the file transfer resource listener port has established that the P1 file transfer product is currently listening for connections on port P2 .
System Action:
None.
User Action:
None.
Reason:
The message displays a TCP/IP listener port monitor trace record. P1 is the trace ID, and P2 is the trace text.
System Action:
None.
User Action:
Contact Technical Support.
Reason:
A display command was received for a listener monitor, but the requestor is not in 3270 full-screen mode.
System Action:
The display command is rejected.
User Action:
Enter the display command from a 3270 session.
Reason:
The data space is active. The FTP policy mode is P1 , and the name of the loaded ruleset is P2 .
System Action:
FTP policy rules are enforced.
User Action:
None.
Reason:
The data space is active, but no FTP policy ruleset is loaded. No FTP policies are in force.
System Action:
None.
User Action:
If you want to enforce FTP policies, select L on the FTP Policy Maintenance menu to load an FTP policy ruleset in the data space.
Reason:
The data space is not active, and FTP policy rules cannot be enforced.
System Action:
FTP policy rules are not enforced.
User Action:
To enforce any loaded policy rules, start the data space manager task (for example, S SOLVEDSP).
You can also monitor and control the data space manager from the status monitor by defining an STC class resource for the manager.
Reason:
The data space is in error, and FTP policy rules cannot be enforced.
System Action:
FTP policy rules are not enforced.
User Action:
It is likely that a wrong version of the Data Space Manager is active. To find out the version of the Data Space Manager, issue the following command from a Command Entry panel:
SYSCMD F manager-task,DISPLAY
The returned N6DQ41 message contains the version of the data space. Ensure that the version is at least 0410.
If you are using an old manager, replace it with the new version.
If you are using the correct manager, note the feedback code and contact Technical Support.
Reason:
The request cannot be processed when the data space is inactive.
System Action:
None.
User Action:
To perform this action, start the data space manager task first (for example, S SOLVEDSP).
Reason:
An error occurred when communicating with the Data Space Manager. The most likely cause is that you are using an old version of the manager.
P1 is the feedback code that identifies the error.
System Action:
The request is not processed.
User Action:
To find out the version of the Data Space Manager, issue the following command from a Command Entry panel:
SYSCMD F manager-task,DISPLAY
The returned N6DQ41 message contains the version of the data space. Ensure that the version is at least 0410.
If you are using an old manager, replace it with the new version.
If yoy are using the correct manager, note the feedback code and contact Technical Support.
Reason:
Sysname and Version specified is unknown to the system.
System Action:
The request is rejected.
User Action:
Use '?' to list a selection list of Sysname and Version known to system.
Reason:
The Event Logging Database, EVNTDB, is not in an ACTIVE state. Any reporting or extract functions that use the database are not available.
System Action:
The request is rejected.
User Action:
You can start the EVNTDB database by initializing event logging and reporting as follows:
1. Access the list of region parameter groups.
2. Enter U beside the EVENTLOG parameter group.
3. Press F6 (Action).
Reason:
The specified dataset is not valid. Either it does not exist, or it is not sequential with a variable blocked record format (RECFM=VB) and a logical record length of at least 502 (LRECL=502).
System Action:
The request is rejected.
User Action:
Specify a valid extract dataset, and retry.
Reason:
You selected the EX option, but no extract dataset name was provided either by the you or by the EVNTARC Archive Dataset field in the EVENTLOG parameter group.
System Action:
The request to extract file transfer events is not processed.
User Action:
Specify an extract dataset name in the field provided.
Reason:
The extract dataset entry contained a GDG relative number (for example, A.B(+1)). However, the dataset name was not a GDG base name.
System Action:
The request is rejected.
User Action:
Correct the GDG base name and retry.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Contact Technical Support.
Reason:
The SSI is active. The FTP policy mode is P1 , and the name of the loaded ruleset is P2 .
System Action:
FTP policy rules are enforced.
User Action:
None.
Reason:
The SSI is active, but no FTP policy ruleset is loaded. No FTP policies are in force.
System Action:
None.
User Action:
If you want to enforce FTP policies, select L on the FTP Policy Maintenance menu to load an FTP policy ruleset in the SSI.
Reason:
The SSI is not active, and FTP policy rules cannot be enforced.
System Action:
FTP policy rules are not enforced.
User Action:
To enforce any loaded policy rules, start the SOLVESSI task (for example, S SOLVESSI).
Reason:
The SSI is in error, and FTP policy rules cannot be enforced.
System Action:
FTP policy rules are not enforced.
User Action:
It is likely that a wrong version of the SSI is active.
If you are using an old SSI, replace it with the new version.
If you are using the correct SSI, contact Technical Support.
Reason:
The request cannot be processed when the SSI is inactive.
System Action:
None.
User Action:
To perform this action, start the data space manager task first (for example, S SOLVESSI).
Reason:
An error occurred when communicating with the SSI. The most likely cause is that you are using an old version of the manager.
P1 is the feedback code that identifies the error.
System Action:
The request is not processed.
User Action:
If you are using an old SSI, replace it with the new version.
If you are using the correct SSI, contact Technical Support.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Contact your local Support Center.
Reason:
Template definitions are special and cannot be accessed from this panel.
System Action:
The request is rejected.
User Action:
Access template definitions from the Template Definition Menu. To access that menu, enter the /RADMIN.T path.
Reason:
The NetMaster for File Transfer CONNECT:Mailbox log exit, NMCMLGEX, is active. P1 shows the module name and version number. P2 identifies the EPS ID from which CONNECT:Mailbox events can be received.
System Action:
None.
User Action:
None.
Reason:
The NetMaster for File Transfer CONNECT:Mailbox log exit, NMCMLGEX, has requested the services of the event delivery facility, but the request was rejected because of one of the following:
- The required SSI is not active.
- The SSI is active but is running without the event delivery facility.
System Action:
Log records will be forwarded to the NetMaster for File Transfer region as soon as the SSI region (together with the event delivery facility) becomes active.
User Action:
Ensure that the SSI region is started with the event delivery facility (XEVNT=YES).
Reason:
The NetMaster for File Transfer CONNECT:Mailbox log exit, NMCMLGEX, has requested the services of the event delivery facility, but the request was rejected because the SSI region is not currently active.
System Action:
Log records will be forwarded to the NetMaster for File Transfer region as soon as the SSI region (together with the event delivery facility) becomes active.
User Action:
Ensure that the SSI region is started with the event delivery facility (XEVNT=YES).
Reason:
The NetMaster for File Transfer CONNECT:Mailbox log exit, NMCMLGEX, requested the services of the event delivery facility, but the request was rejected because the SSI is shutting down.
System Action:
The log record is not forwarded to this region. This file transfer event is lost.
User Action:
Ensure that the SSI region is restarted.
Reason:
The NetMaster for File Transfer CONNECT:Mailbox log exit, NMCMLGEX, issued a $NMXEVNT request to forward a CONNECT:Mailbox event to the event receiver. The request was rejected, the values of the R0 and R15 return codes from the $NMXEVNT request are P1 and P2 respectively.
System Action:
The event record is not forwarded to this region.
User Action:
Note the value of R0 and R15, and contact Technical Support.
Reason:
This message is the first of a group of messages that are issued when an abend occurs in the NetMaster for File Transfer CONNECT:Mailbox log exit, NMCMLGEX. The complete set of messages is:
RFMX06 ABEND AT +nnnn IN xxxxxxxx xxxx LEVEL xxxxxx
RFMX07 RECEIVED R1=xxxxxxxx RECORD ADDR=xxxxxxxx RECORD TYPE=xx RFMX08 PSW=xxxxxxxx xxxxxxxx INT=xxxxxxxx
RFMX09 R0-R3 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
RFMX09 R4- R7 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
RFMX09 R8-R11 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
RFMX09 R12-R15 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
Message RFMX06 identifies the abend offset, module, version, and level.
Message RFMX07 identifies the parameters passed by CONNECT:Mailbox:
RECEIVED R1 is the value in R1 when the exit was called.
RECORD ADDR is the value of the first full word addressed by R1. If R1 was invalid, this is shown as UNKNOWN.
RECORD TYPE is the CONNECT:Mailbox log record type. If either R1 or the record address was invalid, this is shown as ??.
Message RFMX08 identifies the failing PSW and program interruption information.
Messages RFMX09 identify the general purpose registers at the time of the abend.
System Action:
The log record is ignored, and processing continues.
User Action:
Contact Technical Support. Ensure that you have the following information available:
- The entire group of messages (RFMX06 to RFMX09)
- The version and maintenance level of CONNECT:Mailbox
Reason:
This message is one of a group of messages that are issued when an abend occurs in the NetMaster for File Transfer CONNECT:Mailbox log exit, NMCMLGEX.
For more information, see the help for message RFMX06.
System Action:
See RFMX06.
User Action:
See RFMX06.
Reason:
This message is one of a group of messages that are issued when an abend occurs in the NetMaster for File Transfer CONNECT:Mailbox log exit, NMCMLGEX.
For more information, see the help for message RFMX06.
System Action:
See RFMX06.
User Action:
See RFMX06.
Reason:
This message is the last of a group of messages that are issued when an abend occurs in the NetMaster for File Transfer CONNECT:Mailbox log exit, NMCMLGEX.
For more information, see the help for message RFMX06.
System Action:
See RFMX06.
User Action:
See RFMX06.
Reason:
The forwarding of CONNECT:Mailbox log events has resumed. This message indicates a recovery from a previous error condition (for example, the required SSI region was successfully restarted).
System Action:
CONNECT:Mailbox log events are now sent to the event receiver.
User Action:
None.
Reason:
The NetMaster for File Transfer CONNECT:Mailbox log exit, NMCMLGEX, requested the services of the event delivery facility. The request was rejected because the event delivery facility could not obtain storage (R0=7 and R15=28 returned from $NMXEVNT).
System Action:
The CONNECT:Mailbox log event is not sent to the event receiver.
User Action:
Contact Technical Support.
Reason:
This is a diagnostic trace message.
The NetMaster for File Transfer CONNECT:Mailbox log exit, NMCMLGEX, was called by CONNECT:Mailbox. The log record is identified as follows:
P1 is the log record EXIT type - usually 6.
P2 is the log record type (Key code) - usually A, B, or D.
P3 is NMCMLGEX action:
SES indicates that log record will be forwarded to this region IGN indicates that log record is ignored
P4 is the log record data (the first 55 characters only)
System Action:
None.
User Action:
None.
Reason:
The NetMaster for File Transfer CONNECT:Mailbox log exit, NMCMLGEX, was called by CONNECT:Mailbox. The log record is not recognized as a valid CONNECT:Mailbox log exit record.
P1 is the log record EXIT type (the expected type is 6).
P2 is the log record type (Key code) (the expected values is A, B, or C).
System Action:
The event record is not forwarded to this region.
User Action:
Contact Technical Support. Ensure that you have available details of the version and maintenance level of CONNECT:Mailbox.
Reason:
The CONNECT:Mailbox log exit for NetMaster for File Transfer, NMCMLGEX, tried to load a load module, but the loading operation failed. The load module name is P1 and the values of the R0 and R15 return codes from the LOAD or BLDL instruction are P2 and P3 respectively.
System Action:
The load module is not loaded and is excluded from further processing, the result of which depends on which module has failed to load:
Module NMCMLGEX No events will be forwarded to the region.
Other Modules Other modules relate to your own exits. The result of not executing these modules depends on your implementation.
User Action:
Use the R0 and R15 return codes to determine the cause of the error.
A common error is R15=4 (accompanying an 806 system completion code), which indicates that the module could not be found in the load library list (that is, the list of libraries that are specified in the CONNECT:Mailbox STEPLIB).
Ensure that the Management Services LPALOAD load library is either included in the CONNECT:Mailbox STEPLIB or included in the system link list.
Notes: - All libraries included in the STEPLIB must be APF authorized. - The CONNECT:Mailbox region must be recycled to restart the log exit.
Reason:
The CONNECT:Mailbox log exit for NetMaster for File Transfer, NMCMLGEX, was unable to obtain or free working storage. P1 is the failing request and P2 is the value of the R15 code.
System Action:
The request cannot be processed.
User Action:
Use the R15 code to determine the cause of the error.
Reason:
No process(es) were found matching the search criteria requested.
System Action:
None.
User Action:
None.
Reason:
The process definition identified by P1 was changed successfully by the user P2 .
System Action:
None.
User Action:
None. This message is informational only.
Reason:
The process definition identified by P1 was deleted successfully by the user P2 .
System Action:
None.
User Action:
None. This message is informational only.
Reason:
The process definition identified by P1 was flushed successfully by the user P2 .
System Action:
None.
User Action:
None. This message is informational only.
Reason:
The process definition identified by P1 was held successfully by the user P2 .
System Action:
None.
User Action:
None. This message is informational only.
Reason:
The process definition identified by P1 was released successfully by the user P2 .
System Action:
None.
User Action:
None. This message is informational only.
Reason:
The heartbeat procedure for a queue commences processing. The message identifies the queue type, P1 , the status to be checked, P2 , and the depth threshold, P3 .
System Action:
None
User Action:
None
Reason:
A queue monitor heartbeat procedure is invoked without one of the necessary parameters. P1 identifies the missing parameter.
System Action:
Heartbeat processing is terminated.
User Action:
Update the definition of the affected resource, and specify the missing parameter.
Reason:
A heartbeat procedure for a CONNECT:Direct monitor resource issued a command to solicit information from the CONNECT:Direct region and received either no response or a response which was not expected. The response received is in the resource transient log.
P1 identifies the owning CONNECT:Direct region.
P2 is the name of the monitor resource.
System Action:
None
User Action:
Check the transient log for the resource for the response, if any, that was received. The response may indicate a degradation within CONNECT:Direct that is causing it not to respond, in which case remedial action might be necessary.
Reason:
A CONNECT:Direct queue monitor has checked for processes in the queue that have the displayed status (if status is applicable).
This message displays the number of such processes found when the number does not exceed the defined threshold.
P1 identifies the owning CONNECT:Direct region.
P2 is the name of the monitor resource.
P3 identifies the type of queue.
P4 identifies the process status. (Not available for C:D for OS/400)
P5 is the number of CONNECT:Direct processes in the P3 queue that are in the P4 state (if applicable).
P6 shows the time when the information was obtained.
System Action:
None
User Action:
None
Reason:
A CONNECT:Direct queue monitor has checked for processes in the queue that have the displayed status (if status is applicable).
This message displays the number of such processes found when the number exceeds the defined threshold.
P1 identifies the owning CONNECT:Direct region.
P2 is the name of the monitor resource.
P3 identifies the type of queue.
P4 identifies the process status. (Not available for C:D for OS/400)
P5 is the number of CONNECT:Direct processes in the P3 queue that are in the P4 state (if applicable).
P6 shows the time when the information was obtained.
System Action:
None
User Action:
None
Reason:
QUEUE TYPE P1 is not supported by CONNECT:Direct for P1 .
System Action:
Request is rejected.
User Action:
Delete the CDMON resource as it serves no purpose.
Reason:
The heartbeat procedure for a CONNECT:Direct remote node monitor has commenced processing. The message identifies the remote node whose availability is to be checked ( P1 ).
System Action:
None
User Action:
None
Reason:
The heartbeat procedure for a remote node monitor has been invoked without the required remote node name.
System Action:
Heartbeat processing is terminated.
User Action:
Update the definition of the affected resource. On the Monitor Details panel of the resource monitor definition, complete the Remote Node Name field.
Reason:
The remote node monitor has determined that the monitored remote node is available:
P1 identifies the owning file transfer resource.
P2 is the name of the monitor resource.
P3 is the name of the remote node.
P4 is the time.
System Action:
None
User Action:
None
Reason:
The remote node monitor has determined that the monitored remote node is unavailable:
P1 identifies the owning file transfer resource.
P2 is the name of the monitor resource.
P3 is the name of the remote node.
P4 is the time.
System Action:
None
User Action:
None
Reason:
The monitored remote node is unknown to the remote node monitor because of one of the following reasons:
P1 identifies the owning file transfer resource.
P2 is the name of the monitor resource.
P3 is the name of the remote node.
P4 is the cause of the error.
P5 is the time.
System Action:
None
User Action:
For a CONNECT:Direct remote node, check the CONNECT:Direct network map.
For an FTP remote server node, check the Domain Name System (DNS) definition.
Reason:
A request to check the availability of the monitored remote node has timed out:
P1 identifies the owning file transfer resource.
P2 is the name of the monitor resource.
P3 is the name of the remote node.
System Action:
None
User Action:
None
Reason:
The TCP/IP interface is currently P1. The monitoring of this resource requires the status of the TCP/IP interface to be ACTIVE.
System Action:
Heartbeat processing does not take place.
User Action:
Display the current TCP/IP services status by issuing a SHOW TCPIP command. Message N3AF05 shows the current TCP/IP INTERFACE status.
If the TCP/IP INTERFACE status is INACTIVE - Issue a TCPIP START command. Wait for message N3B201 and then enter a CHK command against this resource.
If the TCP/IP INTERFACE status is QUIESCING or STOPPING - wait for the STATUS to change to INACTIVE and proceed as above.
If the TCP/IP INTERFACE status is STARTING - Wait for message N3B201 and then enter a CHK command against this resource.
Reason:
The monitoring of the remote FTP server P1 has failed due to a socket error, P3 . The feedback code is P2 .
System Action:
Heartbeat processing does not take place.
User Action:
See the NCL Reference for an explanation of the feedback and error codes and suggested user action.
Reason:
The heartbeat procedure for a remote node monitor has been invoked without the required remote node TCP/IP host name or address.
System Action:
Heartbeat processing is terminated.
User Action:
Update the definition of the affected resource. On the Monitor Details panel of the monitor definition, complete the TCP/IP Host Name/Addr field.
Reason:
The heartbeat procedure for a remote node monitor has been invoked without the required remote node port number.
System Action:
Heartbeat processing is terminated.
User Action:
Update the definition of the affected resource. On the Monitor Details panel of the monitor definition, complete the TCP/IP Port Number field.
Reason:
P1 is a text line returned as the result of an FTPMON remote node D (display) command. It describes the operation and remote node details. This message is usually followed by one or more RFREMNDxx message(s) that indicate the outcome of the command.
System Action:
None
User Action:
None
Reason:
You have issued a command against a resource from a remote system. The command is only valid against local resources.
System Action:
The command is rejected.
User Action:
Log on to the resource's local system and issue the command from there.
Reason:
You have issued a command against a resource of class P1. The command is not valid for this resource class.
System Action:
The command is rejected.
User Action:
None.
Reason:
The remote FTP Server address P3 specifies an IPv6 address. The monitoring of the remote FTP server failed because the current sockets API supports IPv4 addresses only.
P1 identifies the owning file transfer resource.
P2 is the name of the monitor resource.
System Action:
Heartbeat processing does not occur.
User Action:
Check the SOCKETS parameter group (/PARMS) and ensure that the TCP/IP Software Type specifies IBMV6.
Reason:
The message displays a file transfer schedule trace record.
P1 is the trace ID, P2 is the procedure ID and P3 is the trace text.
System Action:
None
User Action:
Contact your local support representative.
Reason:
A File Transfer Schedule has begun its pre-processing period.
System Action:
Monitoring for required file transfers begins. The actual state of the File Transfer Schedule resource is set to INACTIVE.
User Action:
None.
Reason:
A File Transfer Schedule's pre-processing period has terminated and the processing period begun.
System Action:
Monitoring for required file transfers continues. The actual state of the File Transfer Schedule resource is set to STARTING.
User Action:
None.
Reason:
A File Transfer Schedule has reached the point where the processing time left is equal to the Longest Transfer Duration.
System Action:
If not all required transfers have begun by this point the Schedule resource's actual state is set to DEGRADED.
User Action:
None.
Reason:
A File Transfer Schedule's processing period has ended and the post-processing period begun.
System Action:
If not all required transfers have ended by this point the Schedule resource's actual state is set to FAILED otherwise it will be set to ACTIVE.
User Action:
None.
Reason:
A File Transfer Schedule's post-processing period has ended.
System Action:
If not all required transfers have ended by this point the Schedule resource's actual state is set to FAILED otherwise it will be set to INACTIVE.
User Action:
None.
Reason:
This is the message issued by the display command to cause the transient log records for an active monitoring period to be displayed.
System Action:
Display active schedule's transient log records.
User Action:
None.
Reason:
A display command was issued against a File Transfer Schedule resource which is not currently monitoring for file transfers.
System Action:
The display command is rejected.
User Action:
None.
Reason:
An activate command was issued against a File Transfer Schedule resource which was not scheduled to monitor file transfers.
System Action:
The activate command is rejected.
User Action:
None.
Reason:
The file transfer schedule specifies a period (Longest Transfer) within which the monitored transfer is expected to complete. The schedule is now within that period from the end of processing, but all required files have not yet been detected. The indication is that the transfer might not complete in time.
System Action:
The actual state of the File Transfer Schedule resource is set to DEGRADED.
User Action:
None
Reason:
The file FTSCHD, which stores Schedule Details so that they are still available after a system outage, is full.
System Action:
Processing continues, however schedule related events will not be stored in the FTSCHD file.
User Action:
Either clear out the records in the file using the ICS Parameter Group FTSCHD (A.C.P), or unallocate the file FTSCHD, and then allocate the FTSCHD file with more space.
Reason:
There was an error reading the FTSCHD file. P1 is the file return code and P2 is the VSAM reason code. The file FTSCHD stores schedule events so that they are still available after a system outage.
System Action:
Processing continues, however schedule related events may not be recovered from the FTSCHD file.
User Action:
Contact your system administrator.
Reason:
There was an error deleting a record from the FTSCHD file. P1 is the file return code and P2 is the VSAM reason code. The file FTSCHD stores schedule events so that they are still available after a system outage.
System Action:
Processing continues, however schedule related events may not be deleted from the FTSCHD file.
User Action:
Contact your system administrator.
Reason:
There was an error writing to the FTSCHD file. P1 is the file return code and P2 is the VSAM reason code. The file FTSCHD stores schedule events so that they are still available after a system outage.
System Action:
Processing continues, however schedule related events may not be written to the FTSCHD file.
User Action:
Contact your system administrator.
Reason:
The schedule related events saved on the FTSCHD file have not been restored as the filters have been changed since the schedule was started.
System Action:
Processing continues, however schedule related events have not been recovered.
User Action:
No action required.
Reason:
There was an error reading the FTSCHD file. P1 is the file return code and P2 is the Sysmsg returned. The file FTSCHD stores schedule events so that they are still available after a system outage.
System Action:
Processing continues, however schedule related events may not be recovered from the FTSCHD file.
User Action:
Contact your system administrator.
Reason:
There was an error deleting a record from the FTSCHD file. P1 is the associated error message. The file FTSCHD stores schedule events so that they are still available after a system outage.
System Action:
Processing continues, however, schedule related events may not be deleted from the FTSCHD file.
User Action:
Contact your System Administrator.
Reason:
A System Image P1 is being loaded but the FTSCHD file contains records that are not related to this System Image. The file FTSCHD stores schedule events so that they are still available after a system outage.
System Action:
All records are deleted from the FTSCHD file.
User Action:
None.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
There is no active schedule (in PROC OR POST stage) found for the related FTSCHD resource.
System Action:
The request is rejected.
User Action:
Wait until the Schedule is in PROC or POST stage before extending.
Reason:
The dialogue with $RFSCHED has been timed-out.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
Unknown Reply from process $RFSCHED.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Another procedure is running. You cannot extend the monitoring period at this time.
System Action:
The request is rejected.
User Action:
Try later after other procedure finishes.
Reason:
A browsing of schedule time is completed.
System Action:
The request is completed.
User Action:
At this time you can only browse the schedule. The line command can be rerun later.
Reason:
This is a warning message.
System Action:
The request needs confirmation before proceeding.
User Action:
Press PF6 to confirm or PF12 to cancel without any change.
Reason:
This schedule is not eligible to be extended.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
The command entered on the command line was not recognized by the procedure.
System Action:
The command is rejected.
User Action:
Correct the command and retry.
Reason:
The request to extend the timers for schedule monitoring has completed successfully.
System Action:
The request is completed.
User Action:
No action is required.
Reason:
An attempt to extend the timers of an active schedule failed due to another procedure holding the system lock.
System Action:
The request is rejected.
User Action:
Try later after other procedure finishes.
Reason:
The request to extend timers for schedule monitoring has completed successfully.
System Action:
The request is completed.
User Action:
No action is required.
Reason:
The attempt to extend the schedule monitoring period was not acceptable.
System Action:
The request is rejected.
User Action:
Try again using another monitoring period.
Reason:
There is a time overlap problem in the schedule extension.
System Action:
The request is rejected.
User Action:
Try the extension with another time.
Reason:
The time for end processing has elapsed.
System Action:
The request is rejected.
User Action:
Try the extension with another time.
Reason:
An attempt to access the Schedule Checkpoint dataset failed. The above
Retcode and VSAM error code were generated.
System Action:
The request is rejected.
User Action:
Interpret the error code using the appropriate IDCAMS manual.
Reason:
An attempt to access the System Table failed. The above Feedback Code was generated.
System Action:
The request is rejected.
User Action:
Interpret the feedback code using the NCL Reference.
Reason:
The execution of procedure $RMDBMS failed. The above Retcode was generated.
System Action:
The request is rejected.
User Action:
Interpret the error code using the appropriate IDCAMS manual.
Reason:
All File Transfers Started Exit have been triggered for this resource.
System Action:
The system has started the user defined procedure for this exit.
User Action:
None.
Reason:
File Transfer Failed Exit has been triggered for this resource.
System Action:
The system has started the user defined procedure for this exit.
User Action:
None.
Reason:
All File Transfer Completed Exits have been triggered for this resource.
System Action:
The system has started the user defined procedure for this exit.
User Action:
None.
Reason:
The schedule has been completed by the exit for this resource.
System Action:
The schedule has completed by Exit for this resource. The monitoring is stopped.
User Action:
None.
Reason:
Schedule was forced off for this resource.
System Action:
The schedule was forced off for this resource. The monitoring is stopped.
User Action:
None.
Reason:
Schedule deleted for this resource.
System Action:
All schedule(s) have been deleted for this resource. The monitoring is stopped.
User Action:
None.
Reason:
Schedule's P1 transfer counts have been reset.
System Action:
The schedule's transfer counts have been reset. The counting of transfer is resumed.
User Action:
None.
Reason:
Only active schedule can be forced off.
System Action:
The request is rejected.
User Action:
None.
Reason:
The file transfer schedule filter definition control file P1 cannot be evaluated. The error is described by P2.
System Action:
The file transfer schedule terminates.
User Action:
Correct the filter entry in the filter definition control file.
Reason:
The Managed FTP SSI policy monitor has established that the SSI is active and ready for Managed FTP actions and events.
System Action:
Monitoring of the SSI policy monitor continues.
User Action:
None.
Reason:
The Managed FTP SSI policy monitor established that the SSI is either inactive, or is not ready for Managed FTP actions and events. The status of the Managed FTP SSI policy monitor will be rechecked within
P1 seconds.
System Action:
The status of the Managed FTP SSI policy monitor is monitored.
User Action:
This message is preceeded by RMEV25** messages. Refer to the explanation for those messages.
Reason:
A request to start a copy of the $RFSDMON procedure was ignored because another copy is currently running. This message may be issued if the FTPCNTL Customizer parameter group is actioned more than once.
System Action:
The request to start a new instance of the procedure is ignored.
User Action:
None.
Reason:
The message displays a Managed FTP SSI policy monitor trace record. P1 is the trace ID, and P2 is the trace text.
System Action:
None.
User Action:
None.
Reason:
You have specified invalid dates.
System Action:
Validation of the search criteria fails.
User Action:
Correct the dates in the indicated fields.
Reason:
You have specified an invalid date-time combination.
System Action:
Validation of the search criteria fails.
User Action:
Correct the date and time in the indicated fields.
Reason:
The VFS operation, P1 , failed with file return code P2 and VSAM feedback code P3 for the VFS key, P4 .
System Action:
None.
User Action:
Contact your system administrator.
Reason:
An attempt to open the VFS database failed as the user does not have the authority to access the database.
System Action:
None.
User Action:
Contact your Security Administrator for assistance.
Reason:
An attempt to update the VFS database failed as the user does not have the update authority.
System Action:
None.
User Action:
Contact your Security Administrator for assistance.
Reason:
The P1 field has an invalid value. The OVER Byte field must be LESS than the UNDER Byte. And the UNDER Byte field must be GREATER than zero.
System Action:
Validation terminates.
User Action:
Correct the Over or Under Byte value and retry.
Reason:
Selection of fields from the list was cancelled.
System Action:
None
User Action:
None
Reason:
No fields were selected from the Fields Selection List. The target file cannot be created.
System Action:
The request is terminated.
User Action:
Redo your request and select one or more fields.
Reason:
An error occurred during a GET function on the vartable P1 for key P2 . The received error code is P3.
System Action:
The request is terminated and the procedure is ended.
User Action:
Contact your system administrator.
Reason:
A user cancelled the request to extract file transfer events from the EVNTDB database.
System Action:
The request to extract file transfer events is not processed.
User Action:
None.
Reason:
Your request to extract file transfer events starts the EVNTDB extract process as a background task that runs with your authority. Progress messages with the prefix RFLO82* are written to the activity log.
System Action:
The process is submitted to your background region.
User Action:
Check the activity log for progress. To access the log, enter the H.L path.
Reason:
The NDB Search did not find any record(s) that match(es) the Extract Criteria.
System Action:
None.
User Action:
Change your criteria and retry.
Reason:
A syntax error was detected during execution of an NDB SCAN statement.
System Action:
None.
User Action:
Review the scan and sort expression and retry the command.
Reason:
The P1 fields require valid value.
System Action:
The validation fails.
User Action:
Specify value in the P1 fields.
Reason:
You have specified invalid dates.
System Action:
Validation of the search criteria fails.
User Action:
Correct the dates in the indicated fields.
Reason:
You have specified an invalid date-time combination.
System Action:
Validation of the search criteria fails.
User Action:
Correct the date and time in the indicated fields.
Reason:
No records are defined in the database for the requested schedule name.
System Action:
None.
User Action:
Display the list of valid schedule names by placing a question mark (?) in this field.
Reason:
The VFS operation, P1 , failed with file return code P2 and VSAM feedback code P3 for the VFS key, P4 .
System Action:
None.
User Action:
Contact your system administrator.
Reason:
An attempt to open the VFS database failed because the user does not have authority to access the database.
System Action:
None.
User Action:
Contact your security administrator for assistance.
Reason:
An attempt to update the VFS database failed because the user does not have update authority.
System Action:
None.
User Action:
Contact your security administrator for assistance.
Reason:
The fields SYSTEM NAME and VERSION are required if a SCHEDULE NAME is provided.
System Action:
The field in error is highlighted.
User Action:
Enter a value.
Reason:
You did not select a value for the highlighted field.
System Action:
None
User Action:
None
Reason:
The P1 fields require valid value.
System Action:
The validation fails.
User Action:
Specify value in the P1 fields.
Reason:
Monitoring of SNA sessions is not available on CONNECT:Direct for P1 .
System Action:
Request is rejected.
User Action:
Delete the CDMON resource as it serves no purpose.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
No records exist.
System Action:
None
User Action:
None
Reason:
The search mode has already been activated.
System Action:
None.
User Action:
None.
Reason:
An invalid slection was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
A request to present an Schedule List failed because an error was encountered allocating a variable table. The request was P1 , the identifier of the variable table was P3 , and the feedback code was P2 .
System Action:
The request is rejected.
User Action:
Interpret the feedback code using the NCL Reference.
Reason:
This is an informational message indicating that a print request has successfully been sent to the requested printer.
System Action:
None
User Action:
None
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Request action on the database failed with non zero return code.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
An attempt was made to select the element described by P1 which had previously been selected.
System Action:
Request rejected.
User Action:
None.
Reason:
A VARTABLE GET failed during System Image Selection.
System Action:
System image selection terminates.
User Action:
Determine the reason for the VARTABLE error.
Reason:
An attempt was made to unselect the element described by P1 which had not previously been selected.
System Action:
Request rejected.
User Action:
None.
Reason:
A VARTABLE ADD failed during System Image Selection.
System Action:
System image selection terminates.
User Action:
Determine the reason for the VARTABLE error.
Reason:
Request action on the database failed with non zero return code.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
No system images with names or versions that start with P2 were found.
P1 is either SYSNAME or VERSION.
System Action:
None.
User Action:
If required, create the system image. You can use any of the following methods to create a system image:
- Use the AutoAssist Express Setup Facility (/RADMIN.AD.E).
- Use the System Images option on the Resource Administration menu (/RADMIN).
- Use the AutoAssist Auto Populate Facility (/RADMIN).
Reason:
No system images of the type P1 were found.
System Action:
None.
User Action:
If required, create the system image. You can use any of the following methods to create a system image:
- Use the AutoAssist Express Setup Facility (/RADMIN.AD.E).
- Use the System Images option on the Resource Administration menu (/RADMIN).
- Use the AutoAssist Auto Populate Facility (/RADMIN).
Reason:
An unknown command was passed to the criteria procedure.
System Action:
The request is rejected.
User Action:
Correct the command to the criteria procedure and rerun.
Reason:
No system image has been selected for schedule forecasting.
System Action:
The request has been abandoned.
User Action:
Select at least one system image and rerun.
Reason:
You pressed the ACTION key before entering values for all required fields: FROMDATE/TODATE/FROMTIME/TOTIME and System Image .
System Action:
The request has been abandoned.
User Action:
Enter values in the FROMDATE/TODATE/FROMTIME/TOTIME/System Image fields and press the ACTION key again.
Reason:
You have specified an invalid date-time combination.
System Action:
Validation of the search criteria fails.
User Action:
Correct the date and time in the indicated fields.
Reason:
You have specified an invalid date-time combination.
System Action:
Validation of the search criteria fails.
User Action:
Correct the date and time in the indicated fields.
Reason:
The P1 fields require valid value.
System Action:
The validation fails.
User Action:
Specify value in the P1 fields.
Reason:
A matched schedule was not found.
System Action:
The search is completed without a matched schedule.
User Action:
Try again with different criteria.
Reason:
The P2 field should be less than p1 field.
System Action:
The validation fails.
User Action:
Specify new values in the P1 and P2 fields.
Reason:
There is no SNA session activity on the Remote Names defined in the monitor definition.
System Action:
None.
User Action:
None.
Reason:
The transfer has stopped updating its record count and is in a stalled status.
System Action:
None.
User Action:
Investigate the reason for the stalled SNA session.
Reason:
The Stalled SNA Session Monitor has issued a heartbeat at the time indicated by P1 to the CONNECT:Mailbox STC and has not received a response.
System Action:
None.
User Action:
None.
Reason:
The Stalled SNA Session Monitor has found no SNA sessions in a stalled status. P1 is the time the monitor performed the heartbeat.
System Action:
None.
User Action:
None.
Reason:
The Stalled SNA Session Monitor has found that there are P1 sessions in a stalled state. This means that the record count has stopped updating. P2 is the time the monitor performed the heartbeat.
System Action:
The Monitor is set to a degraded state under ResourceView and an alert is sent to the Alert Monitor. If the field 'Stalled Time To Stop' is defined in the monitor definition then a stop command will be issued against the session.
User Action:
Issue the display command to check the list of stalled SNA sessions.
Reason:
The region received an FTP transfer termination event that does not have a corresponding START event.
System Action:
Processing continues.
User Action:
None.
Reason:
The region received an FTP transfer in progress event that does not have a corresponding START event.
System Action:
A START event is raised.
User Action:
None.
Reason:
Sthe region received an FTP event indicating that an FTP transfer has started.
P1 is the allocated transfer ID.
P2 is the User ID that initiated the FTP transfer.
P3 qualifies the local file as SOURCE or TARGET .
P4 is the local file name.
P5 is the SOURCE address.
P6 is the TARGET address.
System Action:
A file transfer START event is raised.
User Action:
None.
Reason:
The region received an FTP event indicating that an FTP transfer has successfully completed.
P1 is the allocated transfer ID.
P2 qualifies the local file as SOURCE or TARGET .
P3 is the local file name.
P4 is the number of bytes transmitted.
P5 is the SOURCE address.
P6 is the TARGET address.
System Action:
A file transfer END event is raised.
User Action:
None.
Reason:
The region received an FTP event indicating that an FTP transfer has failed. The message is followed by the RFTOEV06 message, which provides additional information about the failure.
P1 is the allocated transfer ID.
P2 qualifies the local file as SOURCE or TARGET .
P3 is the local file name.
P4 is the SOURCE address.
P5 is the TARGET address.
System Action:
A file transfer FAILURE event is raised.
User Action:
None.
Reason:
The region received an FTP event indicating that an FTP transfer has failed. The message follows the RFFTPV05 message.
P1 is the allocated transfer ID.
P2 is the FTP server error code.
P3 is the text "Reason:" if error text is available.
P4 is the associated error text (if available).
System Action:
None.
User Action:
None.
Reason:
The event handler procedure for the P1 product failed because of an internal error. P2 is the reason for the failure.
System Action:
The procedure terminates.
User Action:
Contact Technical Support.
Reason:
The event handler procedure for the P1 product encountered a recoverable error. Check previous message(s) for the cause of the error.
System Action:
Event processing continues. However, some events might have been lost.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message - Relevant messages in the activity log
Reason:
The event handler procedure for the P7 product failed because of an MDO error. The failure is identified by the following:
- Statement type, ASSIGN
- MDO return code, P1 =&ZMDORC
- MDO feedback code, P2 =&ZDMOFDBK
- Map name, P3 =&ZMDOMAP
- Full map component name, P4 =&ZMDONAME
- Map component tag value, P5 =&ZMDOTAG
- ASN.1 type of the component, P6 =&ZMDOTYPE
System Action:
The message is written to the activity log and is followed by a series of messages (DD9003, DD9004, DD9006, and DD9007), which display the event in dump format. The event is ignored.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message
- Record dump
It is suggested that the information be obtained immediately as follows:
1. Locate the message and dump in the activity log.
2. Use the PRINT START and PRINT END commands to mark the lines. See the activity log help if you do not know how to do this. Ensure that the marked text contains this error message and the entire record dump (that is, up to and including the DD9007 message).
3. Use the PRINT command to print the marked section of the log.
Note: If you use a 3270 terminal emulator and choose to print the diagnostics by using the "cut and paste" procedure, ensure that you include an image where you scroll right to capture the end of this message.
Reason:
The event handler procedure failed because of a data error in the event received from the P8 product. The error is identified by the following:
- Line number, P1 , and procedure name, P2 , where the error occurred
- Subroutine name, P3 , if applicable
- Error condition raised, P4
- Verb operand that has detected the error, P5 , if applicable
- CONNECT:Mailbox log record type, P6
- Statement text where the error occurred, P7
System Action:
This message is written to the activity log and is followed by a series of messages (DD9003, DD9004, DD9006, and DD9007), which display the event in dump format. The event is then ignored.
If file transfer logging is active, it is also written to the file transfer log.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message
- Record dump
It is suggested that the information be obtained immediately as follows:
1. Locate the message and dump in the activity log.
2. Use the PRINT START and PRINT END commands to mark the lines. See the activity log help if you do not know how to do this. Ensure that the marked text contains this error message and the entire record dump (that is, up to and including the DD9007 message).
3. Use the PRINT command to print the marked section of the log.
Note: If you use a 3270 terminal emulator and choose to print the diagnostics by using the "cut and paste" procedure, ensure that you include an image where you scroll right to capture the end of this message.
Reason:
The message displays a file transfer event trace record. P1 is the trace ID, and P2 is the trace text.
System Action:
None.
User Action:
Contact Technical Support.
Reason:
A request to start a copy of the $RFTPEVM procedure was ignored because another copy is currently running.
System Action:
A new copy of the procedure is not started.
User Action:
None.
Reason:
The heartbeat value in the resource definition was less than the minimum global value. The heartbeat value is increased automatically to P1 .
System Action:
The heartbeat value is increased automatically to the minimum value.
User Action:
None.
Reason:
A TCPaccess FTP server FTPMGR resource changed state and invoked the $RFTPSCT procedure. However, the procedure was invoked without the required P1 keyword.
System Action:
The procedure ends with return code 8.
User Action:
Ensure that you created the FTPMGR resource definition by applying the supplied template. If you modified the parameters for the $RFTPSCT procedure on the State Change Exits panel, ensure that you have not removed the OWNER= or the SERVER= keyword.
Otherwise, contact Technical Support.
Reason:
The heartbeat procedure for stalled file transfers has commenced processing. The message shows the stalled time before an alert is issued, P1 , and the stalled time before the file transfer is flushed,
P2 .
System Action:
None.
User Action:
None.
Reason:
The heartbeat procedure of the stalled transfers monitor was invoked without the required Stalled Time to Alert parameter.
System Action:
Heartbeat processing is terminated.
User Action:
Update the definition of the affected resource. On the Monitor Details panel of the definition, specify the missing value in the Stalled Time to Alert field.
Reason:
The transfer monitor has found no file transfers, for the owning CONNECT:Direct application, that exceed the specified stalled time limit.
P1 identifies the owning CONNECT:Direct application.
P2 is the name of the monitor resource.
P3 is the total number of transfers checked.
P4 is the time.
System Action:
None.
User Action:
None.
Reason:
The heartbeat procedure for a CONNECT:Direct monitor resource issued a command to solicit information from the CONNECT:Direct application, and received either no response or a response that was not expected. The response received is in the resource transient log.
P1 identifies the owning CONNECT:Direct region.
P2 is the name of the monitor resource.
System Action:
None.
User Action:
Check the resource transient log for the response, if any, that was received. The response may indicate a degradation within CONNECT:Direct that is causing it not to respond. In which case, remedial action might be necessary.
Reason:
Alerts were raised for P4 CONNECT:Direct file transfers because the transfers exceeded the Stalled Time to Alert value specified for the transfer monitor. P5 transfers were flushed because they exceeded the Stalled Time to Flush value specified for the monitor.
P1 identifies the owning CONNECT:Direct application.
P2 is the name of the monitor resource.
P3 is the number of file transfers checked.
P4 is the number of file transfers for which alerts were raised.
P5 is the number of file transfers flushed.
P6 is the time.
System Action:
None.
User Action:
None.
Reason:
The transfer monitor has found no file transfers in the execution queue of the CONNECT:Direct application being monitored.
P1 identifies the owning CONNECT:Direct application.
P2 is the name of the monitor resource.
P3 is the time.
System Action:
None.
User Action:
None.
Reason:
Monitoring of CONNECT:Direct stalled processes is not available for CONNECT:Direct for P1 .
System Action:
Request is rejected.
User Action:
Delete the CDMON resource as it serves no purpose.
Reason:
A request to act as the manager for CONNECT:Direct agents failed because another process was already performing the function. If KILLPREV=YES was specified, then this process could not be flushed.
System Action:
The request is rejected, and processing terminates.
User Action:
Contact Technical Support.
Reason:
A request to activate or inactivate a CONNECT:Direct agent failed because the manager process could not be started. The request being performed is P1 , and the name of the agent manager is P2 .
System Action:
The request is rejected, and processing terminates.
User Action:
Contact Technical Support.
Reason:
An invalid request was received by the CONNECT:Direct agent manager process. The request data was P1 .
System Action:
The request is rejected, and processing continues.
User Action:
Contact Technical Support.
Reason:
A request was received by the CONNECT:Direct agent manager process, but the request failed. The request was P1 , and the resource being actioned was P2 . The reason for the failure is given by the message,
P3 .
System Action:
Processing continues.
User Action:
Proceed according to message P3 as follows:
Unknown Agent indicates that an invalid agent was named as the file transfer agent. Check this name on the C:D File Transfer Manager General Description panel, and change if appropriate.
Host not known to UNIX agent indicates that the UNIX agent has no record of the named remote host. Check the list of remote hosts defined to the UNIX BMC PATROL agent.
Reason:
A request was successfully completed by the CONNECT:Direct agent manager process. The request was P1 , and the resource to be actioned was P2 .
System Action:
None.
User Action:
None.
Reason:
A request was received by the CONNECT:Direct agent manager process to determine the status of the agent. The resource object ID is P1 , the combined status for the resource is P2 , the status of the event receiver is P3 , and the status of the command broker is P4 . The status of CONNECT:Direct is P5 .
System Action:
None.
User Action:
None.
Reason:
A keyword parameter was either not specified or was specified with an invalid value. The keyword parameter was P1 and the value was P2.
System Action:
The request is rejected and processing terminates.
User Action:
Specify the keyword parameter with a valid value.
Reason:
The CONNECT:Direct agent manager process has started the connection to the agent at port number P3 and host name/address P4 . The type of connection is P1 , and the resource name is P2 .
System Action:
None.
User Action:
None.
Reason:
A command request to the CONNECT:Direct agent failed because the connection to the agent is not active. The current status for the connection is P1 .
System Action:
Command is rejected.
User Action:
Try later when the connection is active.
Reason:
A command request to the CONNECT:Direct agent timed out.
System Action:
The command has been sent to the agent, but the command processor will terminate. If the timeout is caused by processing delay, then the command responses will eventually be written to the activity log. If there is an error, it will be reflected in the CDMGR resource.
User Action:
Check the activity log later, or check the status of the CDMGR resource.
Reason:
A command request was issued to the CONNECT:Direct agent, but only some of the expected command responses were received within the time allowed. The total number of responses actually received was P1 .
System Action:
The command has been sent to the agent, but the command processor will terminate. If the timeout is caused by processing delay, then the command responses will eventually be written to the activity log. If there is an error, then it will be reflected in the CDMGR resource.
User Action:
Check the activity log later, or check the status of the CDMGR resource.
Reason:
An event arrived indicating that a link manager process was inactive.
P1 indicates the reason, which can be FAILED or ENDED.
System Action:
If the CDMGR is being automated then it will be restarted automatically, otherwise a manual restart of the resource will be required.
User Action:
If the reason for the inactivation is because the process FAILED then check the activity log for related messages and contact your local support representative.
Reason:
The user P1 issued the command P2.
System Action:
The command is passed to the remote system for execution.
User Action:
None.
Reason:
CONNECT:Direct for P1 last completed initialization on the date, P2, at the time, P3, on the system, P4.
System Action:
None.
User Action:
None.
Reason:
The current version of the CONNECT:Direct server for P2 for CDMGR P1 is at version P3.
System Action:
None.
User Action:
None.
Reason:
A status query for CONNECT:Direct server for P1 for CDMGR P2 has returned P3.
System Action:
None.
User Action:
None.
Reason:
A connection to a CONNECT:Direct agent was aborted because of an unrecoverable error. P1 is the associated SOLVE Agent ID and P2 is the error condition.
System Action:
The connection is aborted and processing terminates. The CDMGR resource status is set to FAILED.
User Action:
Possible causes are Host Name or Host Address conflicts between the CDMGR resource definition and the remote agent definitions.
Issue a RES or a CHK CDMGR command to inactivate the resource.
Review and correct any conflicting parameters.
If the problem cannot be resolved, contact Technical Support.
Reason:
The message displays an Agent Link Manager trace record. P1 is the trace ID, P2 is the NCL ID, and P3 is the trace text.
System Action:
None.
User Action:
Contact Technical Support.
Reason:
The command requested was rejected because the server was already processing other commands. The timeout period expired before the command could be processed.
System Action:
Command rejected.
User Action:
Wait until all other commands have completed or use a higher timeout period.
Reason:
The command requested was sent to the remote host for execution.
System Action:
None.
User Action:
Wait for the command responses.
Reason:
The command requested could not be executed because of a communication failure with the remote host.
System Action:
Command rejected.
User Action:
Check the log for addtional messages that explain the actual error.
Reason:
Invalid data was received from a remote host. The remote host name/address was P2 and the port number was P1.
System Action:
The data is rejected. Subsequent messages will indicate the error and contents of the data received.
User Action:
Contact your local support representative.
Reason:
This is the first message of a group of messages showing the data that was received from a remote host. This message is the header for the dump of the data. P1 is the total length (in decimal) of the data and P2 is the total length in hexadecimal.
System Action:
None.
User Action:
Note this message and subsequent messages. Contact your local support representative.
Reason:
This is an informational message showing the invalid data received from a remote host.
System Action:
None.
User Action:
None.
Reason:
This is an informational message indicating the end of the display of invalid data received from a remote host.
System Action:
None.
User Action:
None.
Reason:
A connection was successfully established with a remote system using the protocol P1. The remote system is P2 version P3 on operating system platform P4. The process ID on the remote system is P5 and the NCLID on the local system is P6.
System Action:
None.
User Action:
None.
Reason:
This is the last of a set of messages returned in response to a command issued at a remote host.
System Action:
None.
User Action:
None.
Reason:
The tokens P1 to P2 of the data received were null.
System Action:
None.
User Action:
Note this message and subsequent messages. Contact your local support representative.
Reason:
Invalid data was received from a remote host. The received data was intended for component P1 but was not of the correct data type. Part of the data was P2 and optional type check is P3.
System Action:
The data is rejected. Subsequent messages show the entire data string received.
User Action:
Contact your local support representative.
Reason:
This is the first message of a group of messages showing the data that was received from a remote host. This message is the header for the dump of the data. The data dumped has already been translated and tokenized.
System Action:
None.
User Action:
Note this message and subsequent messages. Contact your local support representative.
Reason:
A command request to the remote CONNECT:Direct completed and no response messages resulted from the command.
System Action:
None.
User Action:
None.
Reason:
The data received from a remote host was invalid for a record type of
P1. The total length of the data received was P2. More messages will follow which dump out the tokenised data.
System Action:
None.
User Action:
Note this message and subsequent messages. Contact your local support representative.
Reason:
The command output was truncated to 1000 lines. The maximum number of lines allowed for a command response is 1000.
System Action:
Only the first 1000 lines of output are returned.
User Action:
None.
Reason:
The protocol connection P1 failed because the remote host, whose name/address is P3 was already connected to this region via the resource name P2.
System Action:
Connection rejected, processing terminates. The CDMGR resourse status is set to FAILED.
User Action:
Issue a RES or a CHK CDMGR command to inactivate the resource.
You are only allowed to connect to the same remote host ONCE per region. Specify a different remote host name/address and retry.
Reason:
The protocol connection P1 was rejected because an attempt to get the IP address for the specified host name failed/timed out. The host name was P2.
System Action:
Connection rejected, processing terminates. The CDMGR resourse status is set to FAILED.
User Action:
Issue a RES or a CHK CDMGR command to inactivate the resource.
See related messages to determine the reason for the error or specify the IP address in the resource definition.
Reason:
The protocol connection P1 could not determine the host name for address
P2.
System Action:
Processing continues.
User Action:
See related messages to determine the reason for the error.
Reason:
The message displays an Agent Connection trace record. P1 is the trace ID, P2 is the NCL ID, and P3 is the trace text.
System Action:
None.
User Action:
Contact Technical Support.
Reason:
This message is a status message from the agent that monitors CONNECT:Direct. P1 is the host name of the system, P2 is the port number on which CONNECT:Direct is listening for API connections, and P3 is the status of CONNECT:Direct. The status can be either UP or DOWN .
P4 provides additional information if the status is DOWN.
System Action:
None.
User Action:
If CONNECT:Direct is up, no action is required.
If CONNECT:Direct is down or the CONNECT:Direct user exit is down, you must start or restart CONNECT:Direct.
Reason:
This message is a status message from the primary CONNECT:Direct agent on P1 . It indicates that the primary agent has established BMC PATROL connection to the secondary agent on P2 .
System Action:
The region will commence monitoring the status of CONNECT:Direct on P2 .
User Action:
None.
Reason:
This is a status message from the primary CONNECT:Direct agent on P1 . It indicates that the primary agent has lost BMC PATROL connection to the secondary agent on P2 .
System Action:
The status of the CDMGR resource for P2 is set to FAILED.
User Action:
Check the status of the BMC PATROL connection between P1 and P2 .
Reason:
This is a status message from the primary CONNECT:Direct agent on P1 . It indicates that the primary agent is attempting for the nth time to reestablish the BMC PATROL connection to the secondary agent on P2 .
System Action:
None.
User Action:
None.
Reason:
This is a status message from the primary CONNECT:Direct agent on P1 . Following an earlier failure, the primary agent has attempted to reestablish the BMC PATROL connection to the secondary agent on P2 , but the attempts have failed.
System Action:
None.
User Action:
Investigate the state of the BMC PATROL agents on the remote hosts.
Reason:
This is a status message about the Agent for CONNECT:Direct service that monitors CONNECT:Direct, and generates file transfer events and status events as they occur. P1 identifies the service and its status, which can be either UP or DOWN .
System Action:
None.
User Action:
If the service is up, no action is required.
If it is down, then the agent has failed to restart the service and assistance is required.
Reason:
An error occurred while a command (for example, a sys or CONNECT:Direct command) was being passed to a PATROL agent. P1 is the error text.
System Action:
None.
User Action:
See the PATROL agent message documentation for a full explanation.
The most common reason for the error is that the PATROL agent on the system to which you are sending the command is inactive.
Reason:
The log file, file ID P1 , is not available for processing because an attempt to open the file resulted in a file return code of P2 .
System Action:
The $RFVIEW log browsing procedure terminates.
User Action:
Refer to the NCL Reference to evaluate the file return code; this is the &FILERC system variable as set by &FILE OPEN. Use the SHOW ALLOC and SHOW UDB commands to determine why the file is not available. Correct the problem, and retry.
Reason:
The time must be specified as an operand of the TIME command.
System Action:
The command is not executed.
User Action:
Specify a time as an operand of the TIME command (for example, TIME 13.12.10).
Reason:
The specified time was invalid.
System Action:
The command is not executed.
User Action:
The time should be in the format hh.mm.ss.hs (for example, 10.30.25.05). Only the first two digits, which represent the hours, are mandatory.
Reason:
No log data was found for the date that you specified on the DATE command.
System Action:
None
User Action:
If appropriate, specify a different date. For a list of dates that contain log data, enter the DATE command without specifying a date.
Reason:
The / command was specified, indicating that any text following the / shall be issued as a command, but no text was specified.
System Action:
None.
User Action:
Specify a product command after the / .
Reason:
The / command was specified, indicating that any text following the / shall be issued as a command, but you are not authorized to issue commands.
System Action:
None
User Action:
Contact your system administrator to review your privileges.
Reason:
A command was issued by the use of the / command.
System Action:
None
User Action:
None
Reason:
You have entered the REGION or HLREGION command, specifying a value that contains too many characters.
System Action:
The command is not executed.
User Action:
Specify a value that is less than or equal to eight characters in length.
Reason:
You have entered the ORIGIN or HLORIGIN command, specifying an origin that is more than eight characters long.
System Action:
None
User Action:
Specify a value that is less than or equal to eight characters in length.
Reason:
The LOCATE command on this panel enables you to jump to any labels that you have previously defined.
System Action:
None
User Action:
The following is an example of how to define a label:
Command===> .TOP
The following is an example of how to locate a label:
Command===> LOCATE .TOP
The following is an example of how to get a pick list of defined labels:
Command===> LOCATE .?
If you wish to locate a time or date, use the TIME or DATE command.
Reason:
The number of records to be searched must be entered as an operand of the FINDMAX command.
System Action:
Command field placed in error.
User Action:
Specify the number of records to be searched as an operand of the FINDMAX command.
Reason:
The number of lines specified to search was invalid.
System Action:
Command field placed in error.
User Action:
The number of lines to search should be specified and must be in the range 500 to 10000.
Reason:
A print range that was defined previously has been cancelled.
System Action:
None
User Action:
None
Reason:
You have attempted to mark the start of a print range without indicating from which log record you wish the print range to start.
System Action:
None
User Action:
Mark the start of the range by using one of the following methods:
- To mark by cursor: Type PRINT START at the Command ===> prompt.
- Place your cursor on a log record within the scrollable window. - Press ENTER.
- To mark by time, use the DATE and TIME operands.
Reason:
The start of the print range was set successfully.
System Action:
None
User Action:
None
Reason:
You attempted to mark the start of the print range after the end-of- print range marker that you have set previously.
System Action:
The start-of-print position is not marked.
User Action:
Ensure that the start-of-print marker is always before the end-of-print marker. If necessary, you can enter the PRINT CANCEL command to remove any existing markers and then specify the new markers.
Reason:
The start of the print range was changed successfully.
System Action:
None
User Action:
None
Reason:
You have attempted to mark the end of a print range without indicating at which log record you wish the print range to end.
System Action:
None
User Action:
Mark the end of the range by using one of the following methods:
- To mark by cursor:
- Type PRINT END at the Command ===> prompt. - Place your cursor on a log record within the scrollable window. - Press ENTER.
- To mark by time, use the DATE and TIME operands.
Reason:
The end of the print range was set successfully.
System Action:
None
User Action:
None
Reason:
You attempted to mark the end of the print range before the start-of- print range marker that you have set previously.
System Action:
The end-of-print position is not marked.
User Action:
Ensure that the end-of-print marker is always after the start-of-print marker. If necessary, you can enter the PRINT CANCEL command to remove any existing markers and then specify the new markers.
Reason:
The end of the print range was changed successfully.
System Action:
None
User Action:
None
Reason:
An invalid operand was specified with the PRINT command.
System Action:
The command is not executed.
User Action:
Valid operands are START, END, and CANCEL. Press F1 (Help) for further information about the operands for the PRINT command.
Reason:
One of the operands you specified with the PRINT START or PRINT END command is invalid.
System Action:
The command is not executed.
User Action:
Specify a valid PRINT operand. Valid operands are DATE and TIME. The following are examples of valid PRINT commands:
PRINT START DATE=-1 TIME=13.30
PRINT END DATE=15/07/97 TIME=23.30.28
Reason:
The specified date was invalid.
System Action:
The command is not executed.
User Action:
The date should be in the format dd/mm/yy (for example, 21/07/97). For more information about date formats, press F1 (Help).
Reason:
The log you have selected is being swapped by the file transfer log process.
System Action:
The request is rejected.
User Action:
Wait a minute, then try again.
Reason:
The Log View procedure has been invoked without a specific file ID. The default of the currently active file transfer log cannot be used as there is no current active log.
System Action:
The request is rejected.
User Action:
Contact your systems administrator.
This message indicates that file transfer logging is inactive. The file transfer log is defined by the $RF FTLOGS parameter group. Review the group as follows:
- Ensure that file transfer logging has been requested.
- If logging is not active, consider starting it.
- If it is active, check the initialization log to ensure that the parameter group initialized successfully.
- If there are no apparent errors, re-activate the parameter group to restart the file transfer logging process. Review the activity log for additional messages.
Reason:
Processing stopped because an error was encountered during an attempt to read from the file transfer log file.
System Action:
The Log View procedure, $RFVIEW,terminates.
User Action:
Contact your systems administrator.
This message indicates a file transfer logging failure. Use the key, return code, and VSAM feedback code values to determine the specific nature of the error:
- FILEID( P1 ) is the current file ID.
- FILERC( P2 ) is the value for &FILERC as set by the &FILE GET NCL verb. Refer to the NCL Reference for an explanation of the value.
- VSAMFDBK( P3 ) is the VSAM Feedback code. Refer to your VSAM Reference manual for an explanation of the value.
The file transfer log is defined by the $RF FTLOGS parameter group. Review the group as follows:
- Check the file transfer log parameters, particularly the log file VSAM options. Ensure that these are consistant with the explanation of the VSAM feedback code.
- If there are no apparent errors, re-activate the parameter group to restart the file transfer logging process. Review the activity log for additional messages.
If the problem cannot be resolved, contact your local support representative.
Reason:
When issuing a DATE command for a remote log, the starting date must be specified.
System Action:
The command is rejected.
User Action:
The starting date must be specified with a DATE command. The date should be in the format dd/mm/yy (for example, 21/07/97). Refer to the help for further information about the date formats.
Reason:
Currently, there is no support for printing remote log records.
System Action:
The command is rejected.
User Action:
Log on to the remote region, and print the log records from there.
Reason:
Currently, there is no support available on cursor sensitive help for the remote file transfer activity log.
System Action:
The command is rejected.
User Action:
Help for messages is only available in the local region. Log on to the remote region, and view its file transfer log. You may then use the HELP command, normally assigned to the F1 key.
Reason:
The region received an unexpected return code while retrieving information from a remote file transfer log. This message displays the details of the failing NCL &APPC verb.
System Action:
The operation is terminated.
User Action:
A return code of 16 may indicate that the INMC link to the remote system is inactive. If the cause of the error cannot be determined, contact Technical Support.
Reason:
Unexpected APPC WHAT RECEIVED state was encountered when attempting to retrieve data from a remote log.
System Action:
None
User Action:
Contact your local support representative.
Reason:
An invalid keyword was passed to a procedure.
System Action:
The request is rejected.
User Action:
Contact your local support representative.
Reason:
The PRINT command was entered, but the section of the log for printing was not selected.
System Action:
The print request is rejected.
User Action:
Use the PRINT START and PRINT END commands to mark the section of the log that you wish to print, and then reissue the PRINT command.
Reason:
You have scrolled past either the beginning or the end of the log file, resulting in the log being swapped for the next log file in sequence.
System Action:
None
User Action:
The message is informational only.
Reason:
You have scrolled past either the beginning or the end of a day's log, resulting in records for the next or previous day being displayed.
System Action:
None
User Action:
The message is informational only.
Reason:
The cursor was not on a line with a valid timestamp.
The F4 (ActLog) function key (which issues the ACTLOG command) enables you to access the activity log from the file transfer log. The part of the activity log displayed is determined by the timestamp of the entry the cursor is on.
System Action:
The command is rejected.
User Action:
Place the cursor on a log entry in the file transfer log, and press F4 again. If there are no valid lines in the log, the ACTLOG function is not available.
Reason:
A search for records has been cancelled by the operator from the confirm search panel.
System Action:
The search is terminated.
User Action:
None.
Reason:
No log data was found for the time that you specified on the TIME command or as part of the PRINT TIME= command operand.
System Action:
None
User Action:
Review the logs to determine a valid time stamp.
Reason:
No file transfer events have been recorded by the region.
System Action:
None.
User Action:
None.
Reason:
The current state of the file transfer manager resource is not ACTIVE, as indicated by P1 .
System Action:
The VIP command is terminated.
User Action:
Investigate why the file transfer manager resource is not active, and take the necessary steps to rectify the situation.
Reason:
The VIP command has been issued against resource P1 . The listener TCP/IP port is required for command processing but cannot be obtained.
System Action:
The VIP command terminates.
User Action:
A possible cause of this condition is that you have not defined an FTP Server Monitor (FTPMON) resource of Type TC (TCP-CONNECT, TCP/IP Connection Monitor) for this FTPMGR.
Press F4 (Add) to define a TCP/IP Connection Monitor.
Reason:
The current state of the TCP/IP services is not ACTIVE, as indicated by
P1 .
System Action:
The VIP command is terminated.
User Action:
Investigate why the TCP/IP services is not active, and take the necessary steps to rectify the situation.
Reason:
The command is not supported by CONNECT:Direct for P1 .
System Action:
The command is rejected.
User Action:
None
Reason:
The process definition identified by P1 was changed successfully by the user P2 .
System Action:
None.
User Action:
None. This message is informational only.
Reason:
The process definition identified by P1 was deleted successfully by the user P2 .
System Action:
None.
User Action:
None. This message is informational only.
Reason:
The process definition identified by P1 was flushed successfully by the user P2 .
System Action:
None.
User Action:
None. This message is informational only.
Reason:
The process definition identified by P1 was held successfully by the user P2 .
System Action:
None.
User Action:
None. This message is informational only.
Reason:
The process definition identified by P1 was released successfully by the user P2 .
System Action:
None.
User Action:
None. This message is informational only.
Reason:
The process definition identified by P1 was suspended successfully by the user P2 .
System Action:
None.
User Action:
None. This message is informational only.
Reason:
The P1 mail box P2 batch P3 was p4 by P5 .
System Action:
None.
User Action:
None.
Reason:
This message appears in the transient log for a resource and indicates which command was requested by which user for this resource.
System Action:
None.
User Action:
None.
Reason:
The following parameters were not passed to the GetCDProcess procedure within the $RFWEBPK package:
Parameter 1 - must specify the resource type (for example, STC).
Parameter 2 - must specify the queue type (for example, HOLD).
Parameter 3 - must specify the resource object ID.
System Action:
Package procedure fails.
User Action:
Update the parameters passed to this procedure.
Reason:
The resource status is active.
System Action:
None.
User Action:
None.
Reason:
The resource status is P1.
System Action:
None.
User Action:
None.
Reason:
The selected process is no longer active.
System Action:
None.
User Action:
Close the displayed window, refresh the list and select another process.
Reason:
The P1 CA-XCOM transfer request was held by P2 .
System Action:
None.
User Action:
None.
Reason:
The P1 CA-XCOM transfer request was released by P2 .
System Action:
None.
User Action:
None.
Reason:
The P1 CA-XCOM transfer request was resumed by P2 .
System Action:
None.
User Action:
None.
Reason:
The P1 CA-XCOM transfer request was suspended by P2 .
System Action:
None.
User Action:
None.
Reason:
The P1 CA-XCOM transfer request was terminated by P2 .
System Action:
None.
User Action:
None.
Reason:
The P1 CA-XCOM transfer request was deleted by P2 .
System Action:
None.
User Action:
None.
Reason:
The P1 CA-XCOM transfer request was altered by P2 .
System Action:
None.
User Action:
None.
Reason:
An attempt to translate an object into an XML document for transmission to a data warehouse failed. The data was sourced from application P1, data class P2. The error occurred in mapping the object, the return code and feedback codes for the action were P3. P4 is the name of the component in error.
System Action:
The object is discarded and processing continues.
User Action:
Contact your local support representative.
Reason:
A specified date was invalid. A valid format is dd-mmm-yyy (for example, 21-JUL-2001).
System Action:
None.
User Action:
Correct the date.
Reason:
A specified time was invalid. A valid format is hh.mm (for example, 17.10). hh is in the range 0 through 23; mm is in the range 0 through 59.
System Action:
None.
User Action:
Correct the time.
Reason:
The specified priority must be in the range 0 through 255.
System Action:
None.
User Action:
Specify the correct priority.
Reason:
You pressed F6 (Action) without specifying a value. You cannot perform the Alter action if there is nothing to alter.
System Action:
None.
User Action:
If you do not want to alter anything, press F12 (Cancel).
Reason:
The command processor failed to start an APPC conversation with a CA-XCOM region. P1 and P2 are the return and feedback codes for the APPC allocation.
System Action:
APPC allocation fails, and CA-XCOM command processing terminates.
User Action:
At the status monitor, review the extended display of the XCOM resource. If you cannot resolve the problem, contact Technical Support.
Reason:
The command processor failed while changing from sending to receiving in an APPC conversation. P1 and P2 are the return and feedback codes for the APPC PREPARE_TO_RECEIVE verb.
System Action:
CA-XCOM command processing terminates.
User Action:
At the status monitor, review the extended display of the XCOM resource. If you cannot resolve the problem, contact Technical Support.
Reason:
The command processor failed while in the receiving mode. P1 and P2 are the return and feedback codes for the APPC RECEIVE verb.
System Action:
CA-XCOM command processing terminates.
User Action:
At the status monitor, review the extended display of the XCOM resource. If you cannot resolve the problem, contact Technical Support.
Reason:
The command processor failed while in the sending mode. P1 and P2 are the return and feedback codes for the APPC SEND verb.
System Action:
CA-XCOM command processing terminates.
User Action:
At the status monitor, review the extended display of the XCOM resource. If you cannot resolve the problem, contact Technical Support.
Reason:
The command (action) on a CA-XCOM transfer request was successful.
System Action:
The command is processed by the CA-XCOM region.
User Action:
None.
Reason:
The P1 CA-XCOM command issued to the $RFXCCMD command processor is invalid. Ensure that one of the following values is specified in the COMMAND parameter passed to the processor:
ACTIVE to display active transfer requests.
QUEUED to display queued transfer requests.
HOLD to hold a transfer request. The CORR parameter is also required.
RELEASE to release a transfer request. The CORR parameter is also required.
SUSPEND to suspend a transfer request. The CORR parameter is also required.
RESUME to resume a transfer request. The CORR parameter is also required.
DELETE deletes a transfer request. The CORR parameter is also required.
ALTER to alter a transfer request. The following parameters are also required:
- CORR - ALTERFLG - ALTERDATA
System Action:
The command processor ($RFXCCMD) fails.
User Action:
Contact Technical Support.
Reason:
The command processor failed to define the transaction ID for communicating with the P1 CA-XCOM manager. P2 identifies the message that provides information about the failure.
System Action:
CA-XCOM command processing terminates.
User Action:
Reason:
The command processor cannot determine the LU name of the P1 CA XCOM region.
System Action:
The $RFXCCMD command processor terminates, and the extended display of the affected CA XCOM manager and monitors are updated.
User Action:
Ensure that the P1 CA XCOM region is set up correctly for the CA NetMaster FTM CA XCOM event exit.
For more information, see the CA NetMaster File Transfer Management Installation Guide.
Correct any problems, and then enter CHK beside the P1 manager.
If the event exit is implemented correctly and the problem still occurs, contact Technical Support.
Reason:
The P1 command to the P2 CA-XCOM region failed. P3 identifies the message that provides information about the failure.
A possible cause is that the command was issued to the CA-XCOM region to perform an action on a transfer request that did not have the correct status.
System Action:
CA-XCOM command processing terminates.
User Action:
If the problem persists, contact Technical Support.
Reason:
The command processor failed to terminate an APPC conversation with the
P1 CA-XCOM region and deallocate the associated resources. P2 and P3 are the return and feedback codes for the APPC DEALLOCATE verb.
System Action:
CA-XCOM command processing terminates, and the extended display of the affected CA-XCOM manager and monitors is updated.
User Action:
Enter CHK beside the P1 manager. If a problem still exists, contact Technical Support.
Reason:
An APPC request to the P1 remote system failed. P2 and P3 are the return and feedback codes for the APPC RPC verb.
System Action:
CA-XCOM heartbeat processing terminates, and the extended display of the affected CA-XCOM manager and monitors is updated.
User Action:
Contact Technical Support.
Reason:
The P1 manager resource is inactive.
System Action:
CA-XCOM command processing terminates.
User Action:
Activate the P1 resource. If the problem persists, contact Technical Support.
Reason:
The NetMaster for File Transfer CA-XCOM command processor failed because of an MDO error. The failure is identified by the following:
- Statement type, ASSIGN
- MDO return code, P1 =&ZMDORC
- MDO feedback code, P2 =&ZDMOFDBK
- Map name, P3 =&ZMDOMAP
- Full map component name, P4 =&ZMDONAME
- Map component tag value, P5 =&ZMDOTAG
- ASN.1 type of the component, P6 =&ZMDOTYPE
System Action:
This message is written to the activity log and is followed by a series of messages (DD9003, DD9004, DD9006, and DD9007), which display the event in dump format. The event is ignored.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message
- Record dump
It is suggested that the information be obtained immediately as follows:
1. Locate the message and dump in the activity log.
2. Use the PRINT START and PRINT END commands to mark the lines. See the activity log help if you do not know how to do this. Ensure that the marked text contains this error message and the entire record dump (that is, up to and including the DD9007 message).
3. Use the PRINT command to print the marked section of the log.
Note: If you use a 3270 terminal emulator and choose to print the diagnostics by using the "cut and paste" procedure, ensure that you include an image where you scroll right to capture the end of this message.
Reason:
The $RFXCCMD CA-XCOM command processor failed to profile for EDS notification of events for the P1 LU. The associated command is P2 .
P3 and P4 are the return and feedback codes.
System Action:
CA-XCOM remote node processing terminates.
User Action:
Contact Technical Support.
Reason:
This message provides debugging information for the CA-XCOM command processor.
System Action:
None.
User Action:
None.
Reason:
An APPC request to the P1 remote system failed. P2 and P3 are the return and feedback codes for the APPC RPC verb.
System Action:
CA-XCOM command processing terminates.
User Action:
Contact Technical Support.
Reason:
A MODIFY command to the CA-XCOM region failed. P1 provides the reason for the failure.
System Action:
CA-XCOM MODIFY command processing terminates.
User Action:
Review the activity log to determine if remedial action is required. If the problem persists, contact Technical Support.
Reason:
A MODIFY command to the CA-XCOM region failed. This may have occurred because invalid data was entered in the previously displayed panel, or the response received from XCOM was not complete.
System Action:
CA-XCOM MODIFY command processing terminates.
User Action:
Review the displayed output for indication of the failure. Perform any required remedial action, and reissue the command. If the problem persists, contact Technical Support.
Reason:
A MODIFY command was issued to the CA-XCOM region, and the response timed out.
System Action:
CA-XCOM MODIFY command processing terminates.
User Action:
Reissue the command. If the problem persists, contact Technical Support.
Reason:
The specified value must be a valid data set member name.
System Action:
The value is rejected.
User Action:
Correct the name.
Reason:
An APPC request to the P1 remote system failed. P2 and P3 are the return and feedback codes for the APPC RPC verb.
System Action:
CA-XCOM command processing terminates.
User Action:
Contact Technical Support.
Reason:
A MODIFY command to the CA-XCOM region failed. P1 is the return code from the $RMCMDRG procedure.
System Action:
CA-XCOM MODIFY command processing terminates.
User Action:
Review the activity log to determine what remedial action is required. If you cannot correct the problem, contact Technical Support.
Reason:
No member name has been specified.
System Action:
None.
User Action:
Specify a member name or press F12(Cancel).
Reason:
A specified value must be numeric and in the displayed range.
System Action:
The value is rejected.
User Action:
Correct the value.
Reason:
An APPC request to the P1 remote system failed. P2 and P3 are the return and feedback codes for the APPC RPC verb.
System Action:
CA-XCOM command processing terminates.
User Action:
Contact Technical Support.
Reason:
A MODIFY command to the CA-XCOM region failed. P1 provides the reason for the failure.
System Action:
CA-XCOM MODIFY command processing terminates.
User Action:
Review the activity log to determine if remedial action is required. If the problem persists, contact Technical Support.
Reason:
You specified a value for P1 that exceeded the value you specified for the maximum number of tasks allowed. The value in the Maximum Local Tasks Allowed or the Maximum Remote Tasks Allowed field must be less or equal to the value in the Maximum Tasks Allowed field.
System Action:
The value is rejected.
User Action:
Correct the value.
Reason:
You pressed F6 (Action) without specifying a value.
System Action:
None.
User Action:
Specify a value, or press F12 (Cancel) to cancel the operation.
Reason:
A CA-XCOM file transfer has started:
P1 identifies the transfer as CA-XCOM transfer ID(request number).
P2 is the initiator user Id and P3 is the initiator node.
This message is followed by RFXCEV02 which provides additional details.
System Action:
None.
User Action:
None.
Reason:
A CA-XCOM file transfer has started:
P1 identifies the transfer as CA-XCOM transfer ID(request number).
P2 is source node and P3 is the target node.
This message follows message RFXCEV01.
System Action:
None.
User Action:
None.
Reason:
A CA-XCOM file transfer has completed successfully:
P1 identifies the transfer as CA-XCOM transfer ID(request number).
P2 is source node and P3 is the target node.
System Action:
None.
User Action:
None.
Reason:
A notification has been received from CA-XCOM, indicating a failed file transfer:
P1 identifies the transfer as CA-XCOM transfer ID(request number).
P2 is source node and P3 is the target node.
This message is followed by RFXCEV11 which provides error details.
System Action:
None.
User Action:
None.
Reason:
A non-orderly CA-XCOM shutdown notification was received from P1 .
System Action:
A file transfer failure event will be raised for each currently active CA-XCOM transfer (if any).
User Action:
If desired, restart the CA-XCOM application.
Reason:
The region received a file transfer completion event for the P1 CA-XCOM file transfer but never received the corresponding START event.
System Action:
The region will create a dummy START event for this file transfer. Processing continues.
Important! The created START event uses data from the END event. The start time, the user name, and the transfer rate might be incorrect.
User Action:
None.
Reason:
A CA-XCOM file transfer failed, but no error message was received from the CA-XCOM region.
System Action:
None.
User Action:
Review the system log and check the CA-XCOM region to determine the cause of the failure.
Reason:
An unexpected CA-XCOM SHUTDOWN notification has been received.
System Action:
A file Transfer FAILURE event is raised.
User Action:
You may want to review the reasons for the CA-XCOM termination.
Reason:
A notification has been received from CA-XCOM, indicating a failed file transfer:
P1 identifies the transfer as CA-XCOM transfer ID(request number).
P2 is error text.
This message follows message RFXCEV05.
System Action:
None.
User Action:
None.
Reason:
The NetMaster for File Transfer CA-XCOM event handler procedure has failed because of an internal system error. P1 is the reason for the failure.
System Action:
The procedure terminates.
User Action:
Contact Technical Support.
Reason:
The NetMaster for File Transfer CA-XCOM event message format procedure has initialized successfully.
System Action:
None.
User Action:
None.
Reason:
The NetMaster for File Transfer CA-XCOM event handler procedure has encountered a recoverable error. Check previous messages for the cause of the error.
System Action:
Event processing continues. However, some events may have been lost.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message
- Relevant activity log messages
- CA-XCOM message log
Reason:
The NetMaster for File Transfer CA-XCOM event handler procedure has failed due to an MDO error. The failure is identified by the following:
- Statement type, ASSIGN
- MDO return code, P1 =&ZMDORC
- MDO feedback code, P2 =&ZDMOFDBK
- Map name, P3 =&ZMDOMAP
- Full map component name, P4 =&ZMDONAME
- Map component tag value, P5 =&ZMDOTAG
- ASN.1 type of the component, P6 =&ZMDOTYPE
System Action:
This message is written to the activity log and is followed by a series of messages (DD9003, DD9004, DD9006, and DD9007), which display the event in dump format. The event is ignored.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message
- Record dump
It is suggested that the information be obtained immediately as follows:
1. Locate the message and dump in the activity log.
2. Use the PRINT START and PRINT END commands to mark the lines. See the activity log help if you do not know how to do this. Ensure that the marked text contains this error message and the entire record dump (that is, up to and including the DD9007 message).
3. Use the PRINT command to print the marked section of the log.
Note: If you use a 3270 terminal emulator and choose to print the diagnostics by using the "cut and paste" procedure, ensure that you include an image where you scroll right to capture the end of this message.
Reason:
The NetMaster for File Transfer CA-XCOM event handler procedure has failed due to a data error in the event received from CA-XCOM. The error is identified by the following:
- Line number, P1 , and procedure name, P2 , where the error occurred
- Subroutine name, P3 , if applicable
- Error condition raised, P4
- Verb operand that has detected the error, P5 , if applicable
- CA-XCOM log record type, P6
- Statement text where the error occurred, P7
System Action:
This message is written to the activity log and is followed by a series of messages (DD9003, DD9004, DD9006, and DD9007), which display the event in dump format. The event is then ignored.
If file transfer logging is active, it is also written to the file transfer log.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message
- Record dump
It is suggested that the information be obtained immediately as follows:
1. Locate the message and dump in the activity log.
2. Use the PRINT START and PRINT END commands to mark the lines. See the activity log help if you do not know how to do this. Ensure that the marked text contains this error message and the entire record dump (that is, up to and including the DD9007 message).
3. Use the PRINT command to print the marked section of the log.
Note: If you use a 3270 terminal emulator and choose to print the diagnostics by using the "cut and paste" procedure, ensure that you include an image where you scroll right to capture the end of this message.
Reason:
The message displays a file transfer event trace record. P1 is the trace ID, and P2 is the trace text.
System Action:
None.
User Action:
Contact Technical Support.
Reason:
Incomplete or invalid data were received for the P1 CA-XCOM file transfer. Its compression could not be determined. P2 shows the number of compressed and uncompressed bytes.
System Action:
Processing continues with the compression percentage set to INCOMPLETE.
User Action:
In the CA-XCOM region, review the transfer details. If the compression data and byte counts are correct, contact Technical Support.
Reason:
The NetMaster for File Transfer CA-XCOM event manager could not process an event. This results in the loss of the event.
P1, describes the field in error.
System Action:
The event is discarded.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message
- CA-XCOM message log
Reason:
The $RFXCLNK transfer request monitor procedure failed to profile for Event Distribution Services (EDS) notification of events from the P1 manager. P3 and P4 are the return and feedback codes.
System Action:
CA-XCOM heartbeat processing terminates, and the extended display of the affected CA-XCOM manager and monitors is updated.
User Action:
Contact Technical Support.
Reason:
The link to the P1 CA-XCOM region is inactive. P2 is the monitor affected by the link.
System Action:
Heartbeat and command processing terminate.
User Action:
If the P1 XCMGR resource is active, enter CHK beside it. If the problem persists, contact Technical Support.
If the P1 XCMGR resource is inactive, the message is issued as part of a CA-XCOM termination and is for information only.
Reason:
The P1 manager resource is inactive.
System Action:
Heartbeat and command processing terminates.
User Action:
Activate the P1 resource. If the problem persists, contact Technical Support.
Reason:
There were no CA-XCOM transfer requests with a P1 status.
System Action:
None.
User Action:
None.
Reason:
An APPC request to the P1 remote system failed. P2 and P3 are the return and feedback codes for the APPC RPC verb.
System Action:
CA-XCOM heartbeat processing terminates, and the extended display of the affected CA-XCOM manager and monitors is updated.
User Action:
Contact Technical Support.
Reason:
The NetMaster for File Transfer CA-XCOM display and action service procedure failed due to an MDO error. The failure is identified by the following:
- Statement type, ASSIGN
- MDO return code, P1 =&ZMDORC
- MDO feedback code, P2 =&ZDMOFDBK
- Map name, P3 =&ZMDOMAP
- Full map component name, P4 =&ZMDONAME
- Map component tag value, P5 =&ZMDOTAG
- ASN.1 type of the component, P6 =&ZMDOTYPE
System Action:
This message is written to the activity log and is followed by a series of messages (DD9003, DD9004, DD9006, and DD9007), which display the event in dump format. The event is ignored.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message
- Record dump
It is suggested that the information be obtained immediately as follows:
1. Locate the message and dump in the activity log.
2. Use the PRINT START and PRINT END commands to mark the lines. Refer to the activity log help if you do not know how to do this. Ensure that the marked text contains this error message and the entire record dump (that is, up to and including the DD9007 message).
3. Use the PRINT command to print the marked section of the log.
Note: If you use a 3270 terminal emulator and choose to print the diagnostics by using the "cut and paste" procedure, ensure that you include an image where you scroll right to capture the end of this message.
Reason:
You canceled the action to alter a CA-XCOM transfer request.
System Action:
None.
User Action:
None.
Reason:
The P1 CA-XCOM transfer request was altered by P2 .
System Action:
None.
User Action:
None.
Reason:
The P1 CA-XCOM transfer request was deleted by P2 .
System Action:
None.
User Action:
None.
Reason:
The P1 CA-XCOM transfer request was terminated by P2 .
System Action:
None.
User Action:
None.
Reason:
The P1 CA-XCOM transfer request was held by P2 .
System Action:
None.
User Action:
None.
Reason:
The P1 CA-XCOM transfer request was released by P2 .
System Action:
None.
User Action:
None.
Reason:
The P1 CA-XCOM transfer request was resumed by P2 .
System Action:
None.
User Action:
None.
Reason:
The P1 CA-XCOM transfer request was suspended by P2 .
System Action:
None.
User Action:
None.
Reason:
The P1 transfer was not in the P2 state. The applied action could not be processed.
System Action:
None.
User Action:
Press F6 (Refresh) to refresh the list.
Reason:
You issued the P1 command against a transfer request with an incorrect status. The valid actions are as follows:
Transfer Request Status Actions ACTIVE S, /, V, A, SP, and T HELD S, /, V, A, D, and R INACTIVE S, /, V, A, D, and H SUSPENDED S, /, V, A, D, and RES NETERROR S, /, V, A, and D
System Action:
None.
User Action:
Issue a valid command against the transfer request.
Reason:
CA-XCOM has no transfer requests.
System Action:
None.
User Action:
None.
Reason:
You entered a command beside a transfer request, but the CA-XCOM region that processed that transfer had become inactive. P1 identifies the CA-XCOM region.
System Action:
CA-XCOM command processing terminates.
User Action:
When the CA-XCOM region is active again, retry the operation.
Reason:
An APPC request to the P1 remote system failed. P2 and P3 are the return and feedback codes for the APPC RPC verb.
System Action:
CA-XCOM heartbeat processing terminates, and the extended display of the affected CA-XCOM manager and monitors is updated.
User Action:
Contact Technical Support.
Reason:
CA-XCOM command processing failed at the $RFXCNTL CA-XCOM transfer monitor controller. P1 P2 identify the affected manager and monitor. Their transient logs contain messages about the failure.
System Action:
XCOM heartbeat processing terminates, and the extended display of the affected CA- XCOM manager and transfer request monitor is updated.
User Action:
Use the messages in the transient logs to help you correct the problem. If you are unable to correct the problem, contact Technical Support.
Reason:
The P1 command passed to the $RFXCNTL CA-XCOM transfer monitor controller is invalid. Valid commands that can be specified in the COMMAND parameter passed to the controller are ACTIVE and QUEUED.
System Action:
CA-XCOM heartbeat processing fails.
User Action:
Contact Technical Support.
Reason:
This message provides debugging information for the CA-XCOM transfer monitor controller.
System Action:
None.
User Action:
None.
Reason:
The NetMaster for File Transfer CA-XCOM display and action service procedure failed due to an MDO error. The failure is identified by the following:
- Statement type, ASSIGN
- MDO return code, P1 =&ZMDORC
- MDO feedback code, P2 =&ZDMOFDBK
- Map name, P3 =&ZMDOMAP
- Full map component name, P4 =&ZMDONAME
- Map component tag value, P5 =&ZMDOTAG
- ASN.1 type of the component, P6 =&ZMDOTYPE
System Action:
This message is written to the activity log and is followed by a series of messages (DD9003, DD9004, DD9006, and DD9007), which display the event in dump format. The event is ignored.
User Action:
Contact Technical Support, making available the following diagnostic information:
- Full text of this message
- Record dump
It is suggested that the information be obtained immediately as follows:
1. Locate the message and dump in the activity log.
2. Use the PRINT START and PRINT END commands to mark the lines. Refer to the activity log help if you do not know how to do this. Ensure that the marked text contains this error message and the entire record dump (that is, up to and including the DD9007 message).
3. Use the PRINT command to print the marked section of the log.
Note: If you use a 3270 terminal emulator and choose to print the diagnostics by using the "cut and paste" procedure, ensure that you include an image where you scroll right to capture the end of this message.
Reason:
A ping command to the P1 CA-XCOM remote node failed. P2 and P3 are the return and feedback codes.
System Action:
CA-XCOM heartbeat processing terminates, and the extended display of the affected CA-XCOM manager and monitors is updated.
User Action:
Contact Technical Support.
Reason:
The heartbeat procedure for the P1 P2 CA-XCOM remote node monitor has commenced.
System Action:
None.
User Action:
None.
Reason:
The heartbeat procedure for the P1 P2 CA-XCOM remote node monitor was invoked without the required remote node name.
System Action:
Heartbeat processing is terminated.
User Action:
Update the definition of the affected resource. On the Monitor Details panel of the definition, identify at least one CA-XCOM remote node to monitor.
Reason:
The remote node monitor has determined that the monitored remote node is available:
P1 identifies the owning CA-XCOM region.
P2 is the name of the monitor resource.
P3 identifies the remote node.
P4 is the time when the information is obtained.
System Action:
None.
User Action:
None.
Reason:
The remote node monitor has determined that the monitored remote node is unavailable:
P1 identifies the owning CA-XCOM region.
P2 is the name of the monitor resource.
P3 identifies the remote node.
P4 is the time when the information is obtained.
System Action:
None.
User Action:
None.
Reason:
The TCP/IP interface is currently P1 . The monitoring of this resource requires that the status of the TCP/IP interface is ACTIVE.
System Action:
Heartbeat processing does not take place.
User Action:
Display the current TCP/IP services status by issuing a SHOW TCPIP command. Message N3AF05 shows the current TCP/IP interface status.
If the TCP/IP interface status is INACTIVE , issue a TCPIP START command. Wait for message N3B201, and then enter a CHK command against this resource.
If the TCP/IP interface status is QUIESCING or STOPPING , wait for the status to change to INACTIVE and then proceed as above.
If the TCP/IP interface status is STARTING , wait for message N3B201 and then enter a CHK command against this resource.
Reason:
The remote node monitor has determined that the monitored remote nodes are available:
P1 identifies the owning CA-XCOM region.
P2 is the name of the monitor resource.
P3 identifies the remote nodes.
P4 is the time when the information is obtained.
System Action:
None.
User Action:
None.
Reason:
The remote node monitor has determined that the monitored remote nodes are unavailable:
P1 identifies the owning CA-XCOM region.
P2 is the name of the monitor resource.
P3 identifies the remote nodes.
P4 is the time when the information is obtained.
System Action:
None.
User Action:
None.
Reason:
The region was unable to register for unsolicited messages from a CA-XCOM application. P1 is the reason for the failure. Messages from that application will not appear in the file transfer log.
System Action:
None.
User Action:
Contact Technical Support.
Reason:
The heartbeat procedure for the CA-XCOM stalled transfer monitor has commenced processing. The message shows the stalled time before an alert is issued, P1 , and the stalled time before a file transfer is terminated, P2 .
System Action:
None.
User Action:
None.
Reason:
The heartbeat procedure of the CA-XCOM stalled transfer monitor was invoked without the required Stalled Time to Alert parameter.
System Action:
Heartbeat processing is terminated.
User Action:
Update the definition of the affected resource. On the Monitor Details panel of the definition, specify the missing value in the Stalled Time to Alert field.
Reason:
The stalled transfer monitor has found no file transfers, for the owning CA-XCOM application, that exceed the specified stalled time limit.
P1 identifies the owning CA-XCOM application.
P2 is the name of the monitor resource.
P3 is the total number of transfers checked.
P4 is the time.
System Action:
None.
User Action:
None.
Reason:
The P1 P2 CA-XCOM stalled transfer monitor failed to terminate the P3 file transfer.
P1 identifies the owning CA-XCOM region.
P2 is the name of the monitor resource.
P3 is the transfer request number.
System Action:
None.
User Action:
Check the P2 resource transient log for messages that indicate the reason for the failure. Use the messages as a guide to correct the problem.
Reason:
The P1 P2 CA-XCOM stalled transfer monitor:
- Raised alerts for P4 file transfers because the transfers had been idle for the specified Stalled Time to Alert value.
- Terminated P5 file transfers because the transfers had been idle for the specified Stalled Time to Terminate value.
P1 identifies the owning CA-XCOM application.
P2 is the name of the monitor resource.
P3 is the number of file transfers checked.
P4 is the number of file transfers for which alerts were raised.
P5 is the number of file transfers terminated.
P6 is the time when the information is obtained.
System Action:
None.
User Action:
None.
Reason:
The CA-XCOM stalled transfer monitor has found no file transfers with a status of ACTIVE.
P1 identifies the owning CA-XCOM application.
P2 is the name of the monitor resource.
P3 is the time when the information is obtained.
System Action:
None.
User Action:
None.
Reason:
The heartbeat procedure starts processing for a CA-XCOM transfer request monitor. P1 is the status of the requests to be monitored, and P2 is the threshold specified for the number of requests.
System Action:
None.
User Action:
None.
Reason:
The P3 command passed to the $RFXCTRM CA-XCOM transfer request monitor procedure is invalid. P1 P2 identify the affected monitor. Valid commands that can be specified in the COMMAND parameter passed to the procedure are ACTIVE and QUEUED.
System Action:
CA-XCOM heartbeat processing fails.
User Action:
Contact Technical Support.
Reason:
The heartbeat procedure for a CA-XCOM monitor issued a command to solicit information from the CA-XCOM region but received either no response or a response that was not expected.
P1 identifies the owning CA-XCOM region.
P2 is the name of the monitor resource.
System Action:
None.
User Action:
Check the transient log. The log might indicate that a degradation in the CA-XCOM region is causing the region not to respond. When the degradation is removed, enter CHK beside the monitor.
Reason:
The P1 P2 CA-XCOM transfer request monitor checked the status of the monitored requests, and the number of requests found to be in the P3 state did not exceed the specified threshold.
P1 is the owning CA-XCOM region.
P2 is the name of the monitor.
P3 is the status of the monitored transfer requests.
P4 is the number of transfer requests that were in the P3 state.
P5 is the time when the information was obtained.
System Action:
None.
User Action:
None.
Reason:
The P1 P2 CA-XCOM transfer request monitor checked the status of the monitored requests, and the number of requests found to be in the P3 state exceeded the specified threshold.
P1 is the owning CA-XCOM region.
P2 is the name of the monitor.
P3 is the status of the monitored transfer requests.
P4 is the number of transfer requests that were in the P3 state.
P5 is the time when the information was obtained.
System Action:
None.
User Action:
None.
Reason:
An APPC request to the P1 remote system failed. P2 and P3 are the return and feedback codes for the APPC RPC verb.
System Action:
CA-XCOM heartbeat processing terminates, and the extended display of the affected CA-XCOM manager and monitors is updated.
User Action:
Contact Technical Support.
Reason:
The $RFXCTRM transfer request monitor procedure failed to profile for EDS notification of events from the P1 manager. P3 and P4 are the return and feedback codes.
System Action:
CA-XCOM heartbeat processing terminates, and the extended display of the affected CA-XCOM manager and monitors is updated.
User Action:
Contact Technical Support.
Reason:
This message provides debugging information for the CA-XCOM transfer request monitor.
System Action:
None.
User Action:
None.
Reason:
The CA-XCOM NetMaster for File Transfer exit, NM000FXX, is active. P1 shows the module name and version number. P2 identifies the receiver ID from which CA-XCOM events can be received.
System Action:
None.
User Action:
None.
Reason:
The CA-XCOM NetMaster for File Transfer exit, NM000FXX, has requested the services of the event delivery facility, but the request was rejected because of one of the following:
- The required SSI is not active.
- The SSI is active but is running without the event delivery facility.
System Action:
Event records will be forwarded to the NetMaster for File Transfer region(s) when the SSI region (together with the event delivery facility) becomes active.
User Action:
Ensure that the SSI region is started with the event delivery facility (XEVNT=YES). To determine the SSI used by this NetMaster region, see the SSI parameter group.
Reason:
The CA-XCOM NetMaster for File Transfer exit, NM000FXX, has requested the services of the event delivery facility, but the request was rejected because the SSI region is not currently active.
System Action:
Event records will be forwarded to the NetMaster for File Transfer region(s) as soon as the SSI region (together with the event delivery facility) becomes active.
User Action:
Ensure that the SSI region is started with the event delivery facility (XEVNT=YES). To determine the SSI used by this NetMaster region, see the SSI parameter group.
Reason:
The CA-XCOM NetMaster for File Transfer exit, NM000FXX, requested the services of the event delivery facility, but the request was rejected because the SSI is shutting down.
System Action:
The event record is not forwarded to this region. This file transfer event is lost.
User Action:
To enable this region to receive CA-XCOM events again, ensure that the SSI region is restarted.
Reason:
The CA-XCOM NetMaster for File Transfer exit, NM000FXX, issued a $NMXEVNT request to forward a CA-XCOM event to the event receiver. The request was rejected. The values of the R0 and R15 return codes from the $NMXEVNT request are P1 and P2 respectively.
System Action:
The event record is not forwarded to this region.
User Action:
Note the value of R0 and R15, and contact Technical Support.
Reason:
This message is the first of a group of messages that are issued when an abend occurs in the CA-XCOM NetMaster for File Transfer exit, NM000FXX. The complete set of messages is:
RFXX06 ABEND AT +nnnn IN xxxxxxxx xxxx LEVEL xxxxxx
RFXX07 Received R1=xxxxxxxx RRD Addr=xxxxxxxx Request #:xxxxxx Status:x RFXX08 PSW=xxxxxxxx xxxxxxxx INT=xxxxxxxx
RFXX09 R0-R3 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
RFXX09 R4-R7 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
RFXX09 R8-R11 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
RFXX09 R12-R15 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
Message RFXX06 identifies the abend offset, module, version, and level.
Message RFXX07 identifies the parameters passed by CA-XCOM:
Received R1 is the value in R1 when the exit was called.
RRD ADDR is the address of the CA-XCOM RRD. If R1 was invalid, this is shown as UNKNOWN.
Request # is the CA-XCOM request number. If either R1 or the RRD address was invalid, this is shown as ??.
Status is the CA-XCOM Status flag. If either R1 or the RRD address was invalid, this is shown as ?.
Message RFXX08 identifies the failing PSW and program interruption information.
Messages RFXX09 identify the general purpose registers at the time of the abend.
System Action:
The event record is ignored, and processing continues.
User Action:
Contact Technical Support. Ensure that you have the following information available:
- The entire group of messages (RFXX06 to RFXX09)
- The version and maintenance level of the CA-XCOM application
Reason:
This message is one of a group of messages that are issued when an abend occurs in the CA-XCOM NetMaster for File Transfer exit, NM000FXX.
Received R1 is the value in R1 when the exit was called.
RRD ADDR is the address of the CA-XCOM RRD. If R1 was invalid, this is shown as UNKNOWN.
Request # is the CA-XCOM request number. If either R1 or the RRD address was invalid, this is shown as ??.
Status is the CA-XCOM Status flag. If either R1 or the RRD address was invalid, this is shown as ?.
For more information, see the help for message RFXX06.
System Action:
See RFXX06.
User Action:
See RFXX06.
Reason:
This message is one of a group of messages that are issued when an abend occurs in the CA-XCOM NetMaster for File Transfer exit, NM000FXX.
For more information, see the help for message RFXX06.
System Action:
See RFXX06.
User Action:
See RFXX06.
Reason:
This message is the last of a group of messages that are issued when an abend occurs in the CA-XCOM NetMaster for File Transfer exit, NM000FXX.
For more information, see the help for message RFXX06.
System Action:
See RFXX06.
User Action:
See RFXX06.
Reason:
The forwarding of CA-XCOM events has resumed. This message indicates a recovery from a previous error condition (for example, the required SSI region was successfully restarted).
System Action:
CA-XCOM events are now sent to the event receiver.
User Action:
None.
Reason:
The CA-XCOM NetMaster for File Transfer exit, NM000FXX, requested the services of the event delivery facility. The request was rejected because the event delivery facility could not obtain storage (R0=7 and R15=28 returned from $NMXEVNT).
System Action:
The CA-XCOM event is not sent to the event receiver.
User Action:
Contact Technical Support.
Reason:
This is a diagnostic trace message.
The CA-XCOM NetMaster for File Transfer exit, NM000FXX, was called by CA-XCOM. The event record was identified as follows:
P1 is the CA-XCOM request number.
P2 is an NM000FXX action:
SELECTED indicates that the event record will be forwarded to the NetMaster for File Transfer region(s).
IGNORED indicates that the event record is ignored.
P3 is the CA-XCOM request status.
P4 is the CA-XCOM request type.
P5 is the CA-XCOM transfer type.
System Action:
None.
User Action:
None.
Reason:
The CA-XCOM NetMaster for File Transfer exit, NM000FXX, was called by XCOM. The event record is not recognized as a valid CA-XCOM event.
P1 and P2 are the reasons for the error.
System Action:
The event record is not forwarded to this region.
User Action:
Contact Technical Support. Ensure that you have the version and maintenance level of the CA-XCOM application.
Reason:
The CA-XCOM exit for NetMaster for File Transfer, NM000FXX, was unable to obtain or free up working storage. P1 is the failing request, and
P2 is a code that indicates the reason of the failure.
System Action:
The request cannot be processed.
User Action:
Use the R15 code to determine the cause of the error.
Reason:
A request to initiate or terminate events tracing has been accepted by the CA-XCOM exit for NetMaster for File Transfer, NM000FXX.
P1 is either ON or OFF .
System Action:
CA-XCOM exit for NetMaster events tracing is activated or deactivated.
User Action:
None.
Reason:
The CA-XCOM exit for NetMaster for File Transfer, NM000FXX, has received a notification of an immediate or abnormal CA-XCOM shutdown.
System Action:
A CA-XCOM shutdown event is sent to the NetMaster for File Transfer region(s).
User Action:
None.
Reason:
The CA-XCOM exit for NetMaster for File Transfer, NM000FXX, has received an unsupported CA-XCOM operator command ( P1 ).
System Action:
The command is ignored, and processing continues.
User Action:
Check the spelling of the command, and reissue the command.
Reason:
This is a diagnostic trace message.
The NetMaster for File Transfer CA-XCOM exit, NM000FXX, has received the
P1 CA-XCOM operator command.
System Action:
The P1 command is processed.
User Action:
None.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
When adding a SHARED System Image it is required that the System Affinity is specified by using the F10=Affinity key.
System Action:
The request is rejected.
User Action:
Use F10 to specify the system affinity for the Shared System Image.
Reason:
The command entered on the command line was not recognized by the procedure.
System Action:
The command is rejected.
User Action:
Correct the command and retry.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
The command entered on the command line was not recognized by the procedure.
System Action:
The command is rejected.
User Action:
Correct the command and retry.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Validation found no entry specified on mandatory field/s.
System Action:
The request is rejected.
User Action:
Specify entry on field/s in error.
Reason:
The command entered on the command line was not recognized by the procedure.
System Action:
The command is rejected.
User Action:
Correct the command and retry.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
You have specified a value in the version field that is the same as the version you are copying.
System Action:
The request is rejected.
User Action:
Change the value in the version field so that it is different to the version you are copying.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Validation found no entry specified on mandatory field/s.
System Action:
The request is rejected.
User Action:
Specify entry on field/s in error.
Reason:
The command entered on the command line was not recognized by the procedure.
System Action:
The command is rejected.
User Action:
Correct the command and retry.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
Update is in progress on this definition by other user.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
You are changing the home system of a local system image and if you proceed with it, relationships with resources in shared system images will be deleted. Only resources with the same home system can form relationships.
System Action:
None.
User Action:
Either cancel the change, or save it and unlink all related shared resources.
Reason:
You cannot exclude the home system of a resource. The home system is displayed in white .
System Action:
The request is rejected.
User Action:
To exclude a system that is currently the home system, you must make another system the home system first. Proceed as follows:
Step 1. Enter H beside another system to make it the new home system.
Step 2. Enter E beside the original home system to exclude it.
Reason:
The region is unable to contact the selected system, P1 .
System Action:
The request is rejected.
User Action:
Select a system that is displayed in green, indicating that the system is available.
Reason:
A command was issued against a shared resource but communication could not be established with any of the systems contained in the resource's system affinity list.
System Action:
The request is rejected.
User Action:
Ascertain why none of the systems in the affinity list are contactable. It may be that the region(s) on the system(s) are inactive or are not linked to the local region.
Reason:
You issued the AFFINITY command against a resource that is not part of a shared system image. This is not valid because only resources in shared images have system affintiy lists.
System Action:
The request is rejected.
User Action:
None.
Reason:
The P1 system was either added to or removed from the system affinity list of the P3 resource.
System Action:
None.
User Action:
None.
Reason:
The message indicates whether the P3 system is already included in or excluded from the affinity list of the P1 resource.
System Action:
None.
User Action:
None.
Reason:
The P1 resource has the P2 system as its home. The system was excluded from the affinity list of the owning shared system image, and you must specify another home system for the resource.
System Action:
The resources whose home systems need to be updated are listed.
User Action:
Update the home system of each affected resource.
Reason:
You must update the listed resource definitions before exiting the panel. For example, a system was excluded from the affinity list of the owning shared system image. However, the excluded system was the home system for a defined resource and you must update the definition to use a different home system.
System Action:
Exit from the list is prevented.
User Action:
Update each resource definition.
Reason:
A sysplex resource that begins with the supplied value P1 was not found.
System Action:
None.
User Action:
Specify ? to display a selectable list of sysplex resources.
Reason:
A resource class that begins with the supplied value P1 was not found.
System Action:
None.
User Action:
Specify ? to display a selectable list of resource classes.
Reason:
No selection was made from the Sysplex Resource selection list.
System Action:
None.
User Action:
None.
Reason:
No selection was made from the Resource Class selection list.
System Action:
None.
User Action:
None.
Reason:
User P1 is updating this system image.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
The wildcard character, *, is required at the end of a generic name.
System Action:
The field in error is highlighted.
User Action:
Correct the value, and retry.
Reason:
This message displays the number of records for which the transient log size will be updated. You are prompted to confirm the updates.
System Action:
None.
User Action:
If the number of records found is excessively high, review the appropriateness of the specified transient log size as this can affect the overall performance of the region.
If you want to proceed with the updates, press F6 (Action) to confirm.
If you do not want to proceed with the updates, press Enter. You can then change the criteria to make it more restrictive.
Reason:
An error occurred when accessing a vartable.
System Action:
None.
User Action:
Contact your local support representative.
Reason:
Command Processor has returned the above error when attempting to issue a system command.
System Action:
Processing terminates in error.
User Action:
Determine the cause of the error from the returned message. Refer to the activity log for additional information.
Reason:
The containment resource object ID was not passed to exit process $RM02CRP.
System Action:
The process fails.
User Action:
Contact your system administrator.
Reason:
An invalid parameter was passed to process $RM02CRP. P1 is the parameter name, P2 is the parameter value, P3 is the Containment Resource that contains the process call and P4 is the call option.
System Action:
The process fails.
User Action:
Correct the process call parameter in the resource definition.
Reason:
The containment resource process ($RM02CRP) was called to process an action for a resource that did not have a resource type of CONTAINMENT.
System Action:
The process fails.
User Action:
Update the resource definition and either set the resource type to CONTAINMENT or remove the call to process $RM02CRP.
Reason:
An error was encountered by the Containment Resource Process.
System Action:
The containment process fails.
User Action:
Determine the cause of the error from the message content.
Reason:
A system command was issued by the Containment Resource process for an actual resource belonging to the containment resource.
System Action:
None.
User Action:
None. This message is informational only.
Reason:
The status of a resource belonging to the containment resource was set because the indicated message was received.
System Action:
None.
User Action:
None. This message is informational only.
Reason:
An invalid parameter was passed to process $RM02CRP.
P1 is the parameter value.
System Action:
The process fails.
User Action:
Correct the process call parameter in the resource definition.
Reason:
An invalid keyword was passed to process $RM02CRP.
System Action:
The process fails.
User Action:
Correct the process call parameter in the resource definition.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
The command entered on the command line was not recognized by the procedure.
System Action:
The command is rejected.
User Action:
Correct the command and retry.
Reason:
Invalid option specified.
System Action:
The request is rejected.
User Action:
Use '?' to display valid options, or check comment for valid options.
Reason:
Process name to be processed with the option specified not found.
System Action:
The request is rejected.
User Action:
None.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
The command entered on the command line was not recognized by the procedure.
System Action:
The command is rejected.
User Action:
Correct the command and retry.
Reason:
Invalid option specified.
System Action:
The request is rejected.
User Action:
Use '?' to display valid options, or check comment for valid options.
Reason:
Process name to be processed with the option specified not found.
System Action:
The request is rejected.
User Action:
None.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
A scantext line specified in the relationship expression has a blank scantext value.
System Action:
Field in error is highlighted.
User Action:
Correct.
Reason:
Invalid token value specified.
System Action:
Field in error highlighted.
User Action:
Correct.
Reason:
Parentheses are not matched.
System Action:
Field in error is highlighted.
User Action:
Correct.
Reason:
A defined Extended filter line is not specified in the current relationship expression.
System Action:
Field in error is highlighted.
User Action:
Correct.
Reason:
The length of this variable is restricted to P1 characters.
System Action:
Field in error is highlighted.
User Action:
Correct field value.
Reason:
The scan text is a required field if any of the above fields are specified.
System Action:
Scan text is highlighted in error.
User Action:
Specify a scan text or clear the other specified fields for this line.
Reason:
There is a conflict between the extended filter and the message text.
System Action:
The scan text is highlighted in error.
User Action:
Correct message text or extended filter.
Reason:
Syntax error.
System Action:
Field in error is highlighted.
User Action:
Correct.
Reason:
If a word number is specified then the scan text should not contain any blanks.
System Action:
Field in error is highlighted.
User Action:
Correct.
Reason:
A required field has been omitted.
System Action:
Field in error is highlighted.
User Action:
Enter value.
Reason:
Invalid P1 value encountered during validation.
System Action:
The value is rejected.
User Action:
Specify a valid value.
Reason:
Invalid character value specified.
System Action:
Field in error highlighted.
User Action:
Correct and try again.
Reason:
A field value contains an invalid character.
System Action:
The field is highlighted.
User Action:
Correct the value in the field.
Reason:
The command entered on the command line was not recognized.
System Action:
The command is rejected.
User Action:
Correct the command and retry.
Reason:
No value was supplied for a mandatory field.
System Action:
The field is highlighted.
User Action:
Enter a value in the field.
Reason:
The value entered in the Name field is invalid because it is too long for the selected class.
System Action:
The field is highlighted.
User Action:
Correct the resource name.
Reason:
A value was entered in the Name field, but resources in the nominated class are not named.
System Action:
The field is highlighted.
User Action:
Erase the name or correct the resource class.
Reason:
An message was not selected from the list for inclusion in the resource definition. P1 is the type of message that was being processed.
System Action:
Resource Learning continues.
User Action:
None.
Reason:
Resource Learning could not obtain a lock for the resource being created because another user was creating or updating the resource.
System Action:
The current panel is redisplayed and Resource Learning cannot continue until the lock becomes available.
User Action:
This error indicates that another user is attempting to create or update the same resource. Coordinate resource maintenance with the other user.
Reason:
An unexpected feedback code was returned from an NCL vartable verb.
System Action:
Resource Learning does not continue.
User Action:
Contact your support representative.
Reason:
A question mark (?) was entered in the Resource Name field but there is no prompt support for resource names in this class.
System Action:
The Resource Name field is highlighted as in error.
User Action:
Correct the resource name.
Reason:
The user identified by P1 is being prevented from accessing the function selected due to insufficient access authority. A user requires AOM message receipt, All routcodes and console authority equal to or greater than 'C'.
System Action:
A message is displayed to the user.
User Action:
Contact your system administrator.
Reason:
An invalid character was included in the field value.
System Action:
The field is highlighted as in error.
User Action:
Change the field value so it does not include the disallowed character.
Reason:
The command entered on the command line was not recognized by the procedure.
System Action:
The command is rejected.
User Action:
Correct the command and retry.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
This command requires the number of pages to be specified.
System Action:
The request is rejected.
User Action:
Enter number of pages and retry.
Reason:
The command entered on the command line was not recognized by the procedure.
System Action:
The command is rejected.
User Action:
Correct the command and retry.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
Invalid option specified on the panel selection.
System Action:
The request is rejected.
User Action:
Specify valid option of the display.
Reason:
The JES SET command has been issued to alter the Printer setup as requested.
System Action:
None.
User Action:
None.
Reason:
The display to solicit the Printer details has timed out without having retrieved all necessary information.
System Action:
Procedure terminates in error.
User Action:
Retry.
Reason:
The resource the display was requested for is not an active system image and therefore is not a valid request.
System Action:
Procedure terminates in error.
User Action:
None.
Reason:
The resource selected is controlled by a remote region and therefore requires the display to be send to the remote region by ROF. A remote SIGNON was issued, but it timed out before success notification.
System Action:
No further processing is done.
User Action:
Ensure the INMC link to this region is available, and retry.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
The 'Mount' command requires the volser to be specified.
System Action:
The request is rejected.
User Action:
Enter the volser and retry.
Reason:
The command entered on the command line was not recognized by the procedure.
System Action:
The command is rejected.
User Action:
Correct the command and retry.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
Invalid option specified on the panel selection.
System Action:
The request is rejected.
User Action:
Specify valid option of the display.
Reason:
An invalid character was included in the field value.
System Action:
The field is highlighted.
User Action:
Change the field value so it does not include the disallowed character.
Reason:
The command entered on the command line was not recognized by the procedure.
System Action:
The command is rejected.
User Action:
Correct the command and retry.
Reason:
Parameter field line 2 was specified but line 1 was not.
System Action:
The missing parameter field line is highlighted.
User Action:
If line 2 is the only parameter field required, then move it to line 1. Otherwise, enter the missing parameter filed(s) on line 1.
Reason:
The User Profile identified by P1 has been deleted. P2 may contain additional information from the call to the security system
System Action:
None
User Action:
None
Reason:
The User Profile specified does not exist.
System Action:
The request is rejected.
User Action:
Check User Profile specified, rerun procedure.
Reason:
Update is in progress on this definition by other user.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
An attempt to maintain a user's UAMS record in a linked region failed because the updating procedure terminated abnormally. More information about the error was written to the activity log in the linked region.
System Action:
Processing continues. The UAMS record for the user was not updated in the linked region and is therefore not synchronized with the user's UAMS record in the current region.
User Action:
View the activity log in the region where the update failed to determine the cause of the error. After the problem has been rectified, retry to syncronize UAMS records with the linked regions.
Reason:
An attempt to maintain a user's UAMS record in a linked region failed because either the region is not active or the link to the region is not active.
System Action:
Processing continues. The UAMS record for the user was not updated in the linked region and is therefore not synchronized with the user's UAMS record in the current region.
User Action:
When communication with the remote region is established, retry.
Reason:
An attempt to update a user's UAMS record on a linked region failed because there was no UAMS record for the user on that region. The record cannot be added because an initial password is required.
System Action:
Processing continues. The UAMS record for the user was not created on the linked region.
User Action:
If the remote system is configured using a (full or partial) security exit, simply update the user record via UAMS or the Automation Services User Profile. This will cause the record to be added to the remote region. You can then force an initial password.
If the remote system is not configured with a security exit, then you need to be able to add the user record specifying an initial password. You can do this using either of the following methods: * delete and redefine the user record on this system. The user's initial password is specified when you add the record. * log on to the remote region and add the user record there, specifying the initial password.
Reason:
The UAMS record was successfully added, updated, deleted, or the password was forced on the current region.
P1 identifies the action performed. A value of "Focal Point Propagation" indicates an action has been performed by a focal point region on behalf of a subordinate region.
System Action:
None.
User Action:
None.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
The command entered on the command line was not recognized by the procedure.
System Action:
The command is rejected.
User Action:
Correct the command and retry.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Update is in progress on this definition by other user.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
Type specified for processing unknown to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
Validation found no entry specified on mandatory field/s.
System Action:
The request is rejected.
User Action:
Specify entry on field/s in error.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
Operand value specified for the OCS profile is rejected because user does not have enough authorization in its UAMS definition.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
Userid specified has not been defined in UAMS.
System Action:
The request is rejected.
User Action:
Define userid in UAMS and try again.
Reason:
Values entered in the 'New Password' and 'Confirm New Password' fields were not exactly the same.
System Action:
The password change request is rejected.
User Action:
Reenter your new password in both the 'New Password' and 'Confirm New Password' fields.
Reason:
Your user password has expired and an new password must be entered before continuing.
System Action:
None.
User Action:
Enter a new password.
Reason:
A userid is being used for the first time. The password must be changed before continuing.
System Action:
None.
User Action:
Enter a new password.
Reason:
The value entered in the Current Password field does not match your existing user password for this region.
System Action:
The password change request is not processed.
User Action:
Correct the value in the Current Password field and retry.
Reason:
The value entered P1 is not valid for parameter P2 .
System Action:
The value is rejected.
User Action:
Correct the value for the parameter and retry.
Reason:
The prompt support character (=) was entered in a field on the User Description panel, which indicates that the field value should be sourced from the UAMS record for the nominated user ID. However, there was no UAMS record for the user.
System Action:
The value is rejected.
User Action:
Enter a value other than '=' in the field and retry.
Reason:
The userid specified in a copy request is already present in the database.
System Action:
The request is rejected and the User ID field is highlighted in error.
User Action:
Change the user ID to create a new user profile record or use the update function to update an existing user profile record.
Reason:
If the IP Summary Display field is set to ON , you must select at least one component to display from the list presented below this field; otherwise, you must set the IP Summary Display to OFF .
System Action:
Field set in error.
User Action:
Select a component to display in the IP Summary or set the IP Summary Display to OFF.
Reason:
An attempt to update a user's UAMS record on a linked region failed because there was no UAMS record for the user on that region. The record cannot be added because an initial password is required.
System Action:
Processing continues. The UAMS record for the user was not created on the linked region.
User Action:
If the remote system is configured using a (full or partial) security exit, simply update the user record via UAMS or the Automation Services User Profile. This will cause the record to be added to the remote region. You can then force an initial password.
If the remote system is not configured with a security exit, then you need to be able to add the user record specifying an initial password. You can do this using either of the following methods: * delete and redefine the user record on this system. The user's initial password is specified when you add the record. * log on to the remote region and add the user record there, specifying the initial password.
Reason:
An update of a user's UAMS record in a linked region was propagated to the current region and was processed successfully.
P1 is the operation that was performed (Add, Update, Password_Force, or Delete).
P2 is the ID of the user.
P3 is the name of the ACB from where the request originated.
System Action:
None.
User Action:
None.
Reason:
The UAMS record was successfully added, updated, deleted, or the password was forced on a linked region.
System Action:
None.
User Action:
None.
Reason:
The UAMS record could not be added, updated, deleted, or the password forced because the requesting user does not have authority to update the record in the region.
System Action:
None.
User Action:
None.
Reason:
A request to maintain a user's UAMS record on a linked region was rejected because the linked region is not configured to allow UAMS updates from other regions.
System Action:
The request is rejected.
User Action:
To configure a region to allow UAMS updates from other regions, go to /PARMS and update the SECSHIPPING parameter group.
Set "Ship to Linked Systems?" to YES to allow updates to be propagated. Set "Including Password Changes?" to YES to allow password changes to be propageted.
This process should be repeated on each region that will be involved in UAMS update propagation.
Reason:
Your password change request was passed to a linked region but could not be processed because the old value was not the same as on the current region.
System Action:
Processing continues. Your password is not updated on the linked region.
User Action:
Log on directly to the linked region and update your password so that it is the same as on the current region. Future password changes can then be propogated to the linked systems automatically.
Reason:
The UAMS record details were successfully added, updated, or deleted in a linked region. However, the request included a new password but the region was not configured for remote password change. As a result, the password was not changed in the remote region.
System Action:
The UAMS details were changed but the password was not changed.
User Action:
See the SECSHIPPING paramater group for specifications of remote UAMS update parameters.
Reason:
The service procedure identified by P1 was invoked with an invalid value for the keyword identified by P2 of P3.
System Action:
Request rejected
User Action:
Correct the keyword value and re-try
Reason:
The filter identified by P1 has been successfully saved to disk.
System Action:
None
User Action:
None
Reason:
The function P1 being performed on filter P2 was cancelled at the user's request.
System Action:
None
User Action:
None
Reason:
An attempt was made to Insert or Repeat a condition line which would cause the filter to exceed the maximum number of conditions allowed.
System Action:
Request rejected.
User Action:
None
Reason:
An error has occurred which prevents another condition line from being inserted. Use the REFRESH command in an attempt to re-sequence the existing conditions and allow inserts to be performed.
System Action:
Request rejected.
User Action:
Use REFRESH command
Reason:
The filter identified by P1 was not found
System Action:
Request rejected
User Action:
Determine the correct name or the reason for the object's absence. Correct the error, and retry.
Reason:
A vartable error occurred while performing function(P1) on vartable(P2). The FDBK was P3 and the entry key was P4.
System Action:
Request rejected.
User Action:
Contact systems programmer
Reason:
While defining a filter the field identified by P1 was not entered and is a required field.
System Action:
Field highlighted in error.
User Action:
Enter a value for the specified field
Reason:
While defining a filter the field highlighted as being in error will only accept the value identified by P1 as being valid.
System Action:
Field highlighted in error.
User Action:
Enter the valid value for the specified field
Reason:
The VALUE field of a filter condition line must be a quoted value. The data will automatically be quoted unless it is too long to fit into the field after being quoted, in which case this message will issue.
System Action:
Field highlighted in error.
User Action:
Quote the data in the field.
Reason:
Right and left parentheses were entered without any filter information between them. This is an invalid situation.
System Action:
Field highlighted in error.
User Action:
Enter some filter information between the parentheses.
Reason:
While defining a filter the field highlighted as being in error will not accept the value identified by P1 as being valid.
System Action:
Field highlighted in error.
User Action:
Enter a valid value for the specified field
Reason:
An information only message. If ? is entered in the VALUE field for a FIELD which does not require a discrete set of values, this message will display, indicating the TYPE of data required.
System Action:
None
User Action:
Enter a valid value for the specified field
Reason:
The user has specified a Filter name on an Add or Copy which corresponds to an existing Filter.
System Action:
Request is rejected.
User Action:
Change the name of this Filter and continue.
Reason:
The Filter definition identified by P1 has benn successfully deleted.
System Action:
None
User Action:
None
Reason:
The Filter definition identified by P1 is currently being used by the user identified by P2
System Action:
Request is rejected
User Action:
Wait until the other user has finished with the filter
Reason:
The system name specified in the filter boolean expression does not exist in the system.
System Action:
None.
User Action:
None.
Reason:
The pattern matching characters _ and % are only valid when the LIKE operator is specified.
System Action:
Field highlighted in error.
User Action:
Remove the pattern matching characters or use the LIKE operator.
Reason:
The use of the Field Prompt ? is not supported when any of the Pattern Matching Characters, % or _ are present.
System Action:
Field highlighted in error.
User Action:
Remove either the Field Prompt or the Pattern Matching Characters.
Reason:
Command specified is not recognized by the system.
System Action:
The request is rejected.
User Action:
Specify a valid command.
Reason:
The value for the STAMP field must be numeric, unless the operator is LIKE, in which case the wildcard characters % and _ are supported. The format of the STAMP field is YYYYMMDDHHMMSS.
System Action:
Field highlighted in error.
User Action:
Enter a valid value for the specified field.
Reason:
Valid values for transmission state are start, end and failure.
System Action:
Field highlighted in error.
User Action:
Enter a valid value in field specified.
Reason:
Must be a valid Dataset.
System Action:
Field highlighted in error.
User Action:
Enter a valid value for the specified field.
Reason:
Valid values for the Rule Status field are ACTIVE and INACTIVE.
System Action:
The field in error, Rule Status, is highlighted.
User Action:
Correct the value in the Rule Status field.
Reason:
File name can either be the 'source' filename or the 'target' filename.
System Action:
Field highlighted in error.
User Action:
Enter a valid value in the field specified.
Reason:
The value for the TIME field must be numeric in the format HHMMSS.
System Action:
Field highlighted in error.
User Action:
Enter a valid time value for the specified field.
Reason:
Within the time format HHMMSS, the HH (hours) value cannot exceed 24.
System Action:
Field highlighted in error.
User Action:
Enter a valid 'hours' value for the specified field.
Reason:
Within the time format HHMMSS the MM (minute) value and the SS (second) values cannot exceed 59.
System Action:
Field highlighted in error.
User Action:
Enter a valid 'minutes' and/or 'seconds' value for the specified field.
Reason:
The rule, P1 , is saved.
System Action:
None
User Action:
None
Reason:
You cancelled the function, P1 , which you were performing on rule P2 .
System Action:
None
User Action:
None
Reason:
You used the I or R action code to add a criteria line, but the rule filter already contains the maximum allowable number of lines, P1 .
System Action:
Request is rejected.
User Action:
Redesign your filter expression so that the number of criteria lines is less than the displayed maximum.
Reason:
The rule, P1 , was not found.
System Action:
Request is rejected.
User Action:
Determine the correct name or the reason for the object's absence. Correct the error, and retry.
Reason:
You specified a criteria line that contains only a left and a right parenthesis. A pair of parentheses must enclose a criterion.
System Action:
The fields in error are highlighted.
User Action:
Enter a criterion expression between the parentheses.
Reason:
While adding or copying a rule, you specified a name that is the same as the name of an existing rule.
System Action:
Request is rejected.
User Action:
Change the name of this rule, then continue.
Reason:
The rule definition identified by P1 has been successfully deleted.
System Action:
None
User Action:
None
Reason:
The rule definition identified by P1 is currently being updated by the user identified by P2 .
System Action:
Request is rejected.
User Action:
Wait until the other user has finished with the rule.
Reason:
The number of bytes transferred and the transfer rate are valid filtering values only if the transfer status is END.
System Action:
The field in error is highlighted.
User Action:
Remove the value from the field in error, or change the transfer status criterion to END.
Reason:
The character may not be used within the VALUE Field.
System Action:
Field highlighted in error.
User Action:
Remove the ~ character from the VALUE value.
Reason:
The filter requires at least one line of criteria entry.
System Action:
The fields in error are highlighted.
User Action:
Enter values for the fields in error.
Reason:
You used the I or R action code to add a criteria line, but the maximum allowable number of lines, P1 , has already been reached.
System Action:
The request is rejected.
User Action:
Review your filter so that the number of entries is not more than the displayed maximum.
Reason:
The value for the ELAPSED TIME field is an amount of time, not the time of day. The amount of time is specified in hours and minutes, in the format HHH:MM. Hours must be in the range 0 to 999 (inclusive). Minutes must be in the range 0 to 59 (inclusive). A colon separates the hours and minutes.
System Action:
Field in error highlighted.
User Action:
Enter a valid elapsed time value for the specified field.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Validation found no entry specified on mandatory field/s.
System Action:
The request is rejected.
User Action:
Specify entry on field/s in error.
Reason:
The command entered on the command line was not recognized by the procedure.
System Action:
The command is rejected.
User Action:
Correct the command and retry.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
The command entered on the command line was not recognized by the procedure.
System Action:
The command is rejected.
User Action:
Correct the command and retry.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Validation found no entry specified on mandatory field/s.
System Action:
The request is rejected.
User Action:
Specify entry on field/s in error.
Reason:
The command entered on the command line was not recognized by the procedure.
System Action:
The command is rejected.
User Action:
Correct the command and retry.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Validation found no entry specified on mandatory field/s.
System Action:
The request is rejected.
User Action:
Specify entry on field/s in error.
Reason:
The command entered on the command line was not recognized by the procedure.
System Action:
The command is rejected.
User Action:
Correct the command and retry.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
Update is in progress on this definition by other user.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
You tried to include a class that was already included in another P1 command with the INC class scope.
System Action:
The class is not selected for inclusion.
User Action:
If you want to include this class in the command, you can create a copy of the command specifically for this class.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
You tried to save a command that includes classes already included in another P1 command with the INC class scope.
System Action:
The command definition is not saved.
User Action:
Review the P1 command definitions with the INC class scope, and remove the duplicate classes.
Reason:
When specifying a command's scope, it is not necessary to include an * in the Type or Name fields because they are automatically treated as generic entries.
System Action:
The field in error is highlighted.
User Action:
Remove the * .
Reason:
Validation found no entry specified on mandatory field/s.
System Action:
The request is rejected.
User Action:
Specify entry on field/s in error.
Reason:
If you specified a confirmation exit, the value of the Does This Command Require Confirmation? field must be YES.
System Action:
The field in error is highlighted.
User Action:
Either change the value of the Does This Command Require Confirmation? field to YES or remove the confirmation exit.
Reason:
In the Command Scope window, you cannot specify the P1 field if the value of the CLASS field is P2 .
System Action:
The field in error is highlighted.
User Action:
If you want to use the P1 field, specify a specific class in the CLASS field.
Reason:
In the Command Scope window, you must specify a type in order to specify a name.
System Action:
The field in error is highlighted.
User Action:
Either specify a type or remove the name.
Reason:
The P1 type of prompting is not valid for this command because the class scope is P2 . If present, P3 provides further detail as to the nature of the error.
If the class scope of the command is ALL, INC, or a specific resource
class , the type of prompting must be RESOURCE. These class scopes indicate that the command must be issued against a resource and as such should support prompting for the resource name.
If the class scope of the command is SNA , you may use any type of prompting. However, if the type scope of the command is also specified, the type of prompting must be RESOURCE.
If the class scope of the command is NONE , the type of prompting may be either SYSTEM or NONE.
Commands with SYSTEM or NONE prompting may only be issued as primary commands rather than being issued against resources.
System Action:
The field in error is highlighted.
User Action:
If P2 is ... Then in the Type of Prompting Required field, enter ... ALL, INC, or a specific resource class RESOURCE SNA with a Type command scope RESOURCE SNA without a Type command scope NONE, SYSTEM, or RESOURCE NONE NONE or SYSTEM
Reason:
You can use the F5 (Classes) function key only if the value in the CLASS field is INC or ALL. When the CLASS field contains one of these two values, preessing F5 will list the resource classes that you can include (INC) or exclude (ALL).
System Action:
The command is rejected.
User Action:
If you want to be able to include or exclude classes, specify INC or
ALL in the CLASS field.
Reason:
The command definition you tried to save has a class scope of INC, but you have not included any classes.
System Action:
The command definition is not saved.
User Action:
Press F5 (Classes), and select the classes for inclusion.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
The command entered on the command line was not recognized by the procedure.
System Action:
The command is rejected.
User Action:
Correct the command and retry.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Validation found no entry specified on mandatory field/s.
System Action:
The request is rejected.
User Action:
Specify entry on field/s in error.
Reason:
The command entered on the command line was not recognized by the procedure.
System Action:
The command is rejected.
User Action:
Correct the command and retry.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
Update is in progress on this definition by other user.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Invalid parameters being passed to the procedure. Function must be specified.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the procedure and rerun exec.
Reason:
There is no availability map or monitoring map specified on this resource; therefore, a request to display it is ignored.
System Action:
The request is rejected.
User Action:
None.
Reason:
Delete process cancelled.
System Action:
None.
User Action:
None.
Reason:
A successful request to free table.
System Action:
None.
User Action:
None.
Reason:
The record identified by P1 does not exist.
System Action:
The request is rejected.
User Action:
Refresh the list of records...as the selected record may have been deleted, previously or by another user.
Reason:
Update is in progress on this definition by other user.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
The record identified by P1 has been successfully saved to the database.
System Action:
None
User Action:
None
Reason:
The function P1 being performed on resource P2 was canceled at the user's request.
System Action:
None
User Action:
None
Reason:
An attempt was made to insert or repeat a timer which would cause the maximum number of timers (P1) to be exceeded.
System Action:
Request rejected.
User Action:
None
Reason:
An error has occurred which prevents anothers timer from being inserted. Use the REFRESH command in an attempt to re-sequence the existing timers and allow inserts to be performed.
System Action:
Request rejected.
User Action:
Use REFRESH command
Reason:
A vartable error occurred while performing function(P1) on vartable(P2). The FDBK was P3 and the entry key was P4.
System Action:
Request rejected.
User Action:
Contact systems programmer
Reason:
While defining a resource availability map or monitoring map, the field identified by P1 was not entered. It is a required field.
System Action:
Field in error highlighted.
User Action:
Enter a value for the specified field.
Reason:
The value identified by P1 is not valid for the field identified by P2
This message may also have a list of valid values for the field appended to the end of it.
System Action:
Field highlighted in error.
User Action:
Enter a valid value for the specified field
Reason:
One of the fields identified by P1 and P2, must be specified on this screen
System Action:
Field(s) highlighted in error.
User Action:
Enter a valid value for one of the specified fields
Reason:
When defining timers in an availabilty map or monitoring map, each combination of DAY, DATE, TIME, and RESOURCE must be unique. This message is issued if two or more timers have been defined with the same DAY, DATE, TIME, and RESOURCE name.
System Action:
Fields in error highlighted.
User Action:
Change details to make timers unique.
Reason:
The DAY portion of a date must be a value between 1 and P1
System Action:
Field(s) highlighted in error.
User Action:
Change day to conform with message
Reason:
It is an invalid situation to specify a generic date AND a day on the one timer.
System Action:
Field(s) highlighted in error.
User Action:
Specify either a generic date or a DAY.
Reason:
The resource identified by P2 may be affected by a change to the availability map or monitoring map identified by P1 .
System Action:
None.
User Action:
Check the resource to ensure its desired state and mode or monitoring activity status are as required.
Reason:
A generic value of '*', 'W/D' or 'W/E' was specified, which would cause the maximum number of timers (P1) to be exceeded, if it were expanded out to one timer entry for each day covered.
System Action:
Field(s) highlighted in error.
User Action:
Correct the number of timer entries to remain below the limit.
Reason:
It is an invalid situation to specify a date AND a generic day on the one timer. A generic day is either * for every day, W/E for Weekends and W/D for Weekdays.
System Action:
Field(s) highlighted in error.
User Action:
Specify either a date or a generic DAY.
Reason:
The availability map or monitoring map identified by P1 has been deleted, causing the resource identified by P2 to have its status reset.
System Action:
None.
User Action:
None.
Reason:
The Availability Map or Monitoring Map identifed by P1 was not saved or copied, because it already exists in the target system image.
System Action:
Request rejected.
User Action:
Specify a name that does not already exist in the target system image.
Reason:
The availability map or monitoring map identified by P1 has been deleted.
System Action:
None.
User Action:
None.
Reason:
The resource status has been reset because no availability map or monitoring map is attached.
System Action:
None.
User Action:
None.
Reason:
There is no use of specifying a timer without specifying any of P1 or
P2 or P3 .
System Action:
Validation failed.
User Action:
Specify desired state, mode or a process.
Reason:
When a process parameter specified, the process name must be specified.
System Action:
Validation failed.
User Action:
CLear process parameter or specify a process name in the process name field.
Reason:
Validation found an expired date and time specified.
System Action:
Validation failed.
User Action:
Specify future date and time.
Reason:
A date entered in a timer detail line cannot be greater than the specified expiry date.
System Action:
Field highlighted in error.
User Action:
Specify a date less than the expiry date or specify later expiry date.
Reason:
You have attempted to do a map reset (MPR) action against a resource that does not have a map override (MPO).
System Action:
Request rejected.
User Action:
None.
Reason:
The availability map or monitoring map P1 was copied successfully from one system image to another system image. Either a copy was created or an existing map was replaced, as indicated by P2 .
System Action:
None.
User Action:
None.
Reason:
An invalid keyword was passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact the system administrator.
Reason:
Update is in progress on this definition by another user.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
No records found to be displayed in the selection list.
System Action:
None.
User Action:
None.
Reason:
An invalid keyword was passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact the system administrator.
Reason:
Validation found no entry specified on mandatory field/s.
System Action:
The request is rejected.
User Action:
Specify entry on field/s in error.
Reason:
Update is in progress on this definition by another user.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
Validation found an invalid value has been specified for P1 .
System Action:
The value is rejected.
User Action:
Specify a value with no blanks.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Validation found no entry specified on mandatory field/s.
System Action:
The request is rejected.
User Action:
Specify entry on field/s in error.
Reason:
Invalid option specified.
System Action:
The request is rejected.
User Action:
Use '?' to display valid options, or check comment for valid options.
Reason:
Filter name to be processed with the option specified not found.
System Action:
The request is rejected.
User Action:
Specify filter name or use '?' to select filter name.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Invalid option specified.
System Action:
The request is rejected.
User Action:
Use '?' to display valid options, or check comment for valid options.
Reason:
Filter name to be processed with the option specified not found.
System Action:
The request is rejected.
User Action:
Specify filter name or use '?' to select filter name.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Validation found no entry specified on mandatory field/s.
System Action:
The request is rejected.
User Action:
Specify entry on field/s in error.
Reason:
Invalid option specified.
System Action:
The request is rejected.
User Action:
Use '?' to display valid options, or check comment for valid options.
Reason:
Filter name to be processed with the option specified not found.
System Action:
The request is rejected.
User Action:
Specify filter name or use '?' to select filter name.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Update is in progress on this definition by other user.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
Validation found no entry specified on mandatory field/s.
System Action:
The request is rejected.
User Action:
Specify entry on field/s in error.
Reason:
Invalid option specified.
System Action:
The request is rejected.
User Action:
Use '?' to display valid options, or check comment for valid options.
Reason:
Filter name to be processed with the option specified not found.
System Action:
The request is rejected.
User Action:
Specify filter name or use '?' to select filter name.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
A complex icon filter, should use option 3 because option 2 is reserved for a simple icon filter
System Action:
The request is rejected.
User Action:
Use option 3 instead.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Update is in progress on this definition by other user.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
Validation found no entry specified on mandatory field/s.
System Action:
The request is rejected.
User Action:
Specify entry on field/s in error.
Reason:
Invalid option specified.
System Action:
The request is rejected.
User Action:
Use '?' to display valid options, or check comment for valid options.
Reason:
Filter name to be processed with the option specified not found.
System Action:
The request is rejected.
User Action:
Specify filter name or use '?' to select filter name.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
A complex icon filter, should use option C because option B is reserved for a simple icon filter.
System Action:
The request is rejected.
User Action:
Use option C instead.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Validation found no entry specified on mandatory field/s.
System Action:
The request is rejected.
User Action:
Specify entry on field/s in error.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Validation found no entry specified on mandatory field/s.
System Action:
The request is rejected.
User Action:
Specify entry on field/s in error.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Update is in progress on this definition by other user.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
Validation found no entry specified on mandatory field/s.
System Action:
The request is rejected.
User Action:
Specify entry on field/s in error.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
This message is displayed on exit from an interactive session, if any changes have been made to a process using interactive edit.
System Action:
Re-enter interactive edit mode and allow user to select FILE or CANCEL
User Action:
Select FILE or CANCEL as appropriate
Reason:
In interactive mode, the STEP command was issued but no steps have been defined in the process.
System Action:
Reject the request.
User Action:
Define steps and continue
Reason:
The current process has been 'STEPPED' to the point where execution would normally terminate. To use the STEP command again the interactive environment will need to be reset by using the REFRESH command
System Action:
Request is rejected.
User Action:
Use the REFRESH key to reset the environment.
Reason:
The process log for this interactive session has been cleared.
System Action:
None
User Action:
None
Reason:
The process log for this interactive session has been cleared, and the processing environment has been refreshed so that execution will re-commence from the first step if the STEP command is used.
System Action:
None
User Action:
None
Reason:
The user has been in interactive edit mode and has returned to RUN mode. The processing environment has been refreshed so that execution will re-commence from the first step if the STEP command is used.
System Action:
None
User Action:
None
Reason:
The process identified by P1 has been successfully saved.
System Action:
None.
User Action:
None.
Reason:
The function P1 being performed on process P2 was cancelled at the user's request.
System Action:
None
User Action:
None
Reason:
A request was made to view the process log for an interactive session but there were no log records found
System Action:
Request rejected
User Action:
None
Reason:
An attempt was made to Insert or Repeat a step which would cause the process to exceed the maximum number of steps allowed.
System Action:
Request rejected.
User Action:
None
Reason:
An error has occurred which prevents anothers step from being inserted. Use the REFRESH command in an attempt to re-sequence the existing steps and allow inserts to be performed.
System Action:
Request rejected.
User Action:
Use REFRESH command
Reason:
A request for parameter definition was made against a line which did not contain a macro name
System Action:
Request rejected
User Action:
Enter details before trying to define parameters
Reason:
The object type identified by P1, with a name of P2, system name of P3 and system version of P4 was not found.
System Action:
Request rejected.
User Action:
Determine the correct name or the reason for the object's absence. Correct the error and retry.
Reason:
A request to browse/update parameters for the macro identified by P1 has ended with return code P2.
System Action:
None
User Action:
Contact systems programmer
Reason:
A request to define parameters for the step identified by P1, which invokes the macro identified by P2, has ended without a change being made to the parameters.
System Action:
None
User Action:
None
Reason:
A request to define parameters for the step identified by P1, which invokes the macro identified by P2, has ended successfully. The new parameter settings will be retained in memory and written to disk if/when the FILE or SAVE command is issued.
System Action:
None
User Action:
None
Reason:
A vartable error occurred while performing function(P1) on vartable(P2). The FDBK was P3 and the entry key was P4.
System Action:
Request rejected.
User Action:
Contact systems programmer
Reason:
While defining a process the field identified by P1 was not entered and is a required field.
System Action:
Field highlighted in error.
User Action:
Enter a value for the specified field
Reason:
The process identified by P1 has not been saved to disk as no changes had been made.
System Action:
None
User Action:
None
Reason:
The value identified by P1 is not valid for the field identified by P2
System Action:
Field highlighted in error.
User Action:
Enter a valid value for the specified field
Reason:
The value identified by P1 is not a valid value where it appears because it is reserved for internal use.
System Action:
Field highlighted in error.
User Action:
Enter a valid value for the specified field
Reason:
All steps which make up a process must have a unique name. This step is invalid because a step with the same name appears prior to it in the process.
System Action:
Field highlighted in error.
User Action:
Enter a unique step name
Reason:
If one part of a condition is entered then all three portions must be entered.
System Action:
Field(s) highlighted in error.
User Action:
Enter missing portions of condition expression
Reason:
No condition may be specified for the first step of a process
System Action:
Field(s) highlighted in error.
User Action:
Clear the condition in error.
Reason:
A condition expression is referencing a step name which does not appear prior to this step in the process
System Action:
Field highlighted in error.
User Action:
Enter another step name or define a step with the required name prior to the current step.
Reason:
A '?' was placed in the macro field and no macros were found to list.
System Action:
Field highlighted in error.
User Action:
Define some macros
Reason:
No macros were found which match the generic portion entered in the macro field.
System Action:
Field highlighted in error.
User Action:
Change the generic portion and try again, or use '?' to list all macros
Reason:
The process identified by P1 has been successfully deleted.
System Action:
None
User Action:
None
Reason:
The service procedure identified by P1 was invoked with an invalid value for the keyword identified by P2 of P3.
System Action:
Request rejected
User Action:
Correct the keyword value and re-try
Reason:
The user has been in interactive edit mode and has returned to RUN mode. The processing environment has not been refreshed as no changes were made during the interactive edit session.
System Action:
None
User Action:
None
Reason:
The user has specified a Process name on an Add or Copy which corresponds to an existing Process.
System Action:
Request is rejected.
User Action:
Change the name of this Process and continue.
Reason:
This is a warning message only. It indicates that P1 steps have been included in the process without having parameters defined for their macros. Issuing FILE or SAVE immediately will cause the process to be saved.
System Action:
None
User Action:
Either issue FILE or SAVE immediately to ignore the warning, or define parameters for the specified macros.
Reason:
A function such as Browse or Update was attempted with the special internal process $NCL as the target. This is invalid as $NCL is not a real process definition.
System Action:
Request is rejected.
User Action:
None.
Reason:
The P1 process definition was not copied because of P2 .
If the definition is for a global process, the operation is inappropriate because a global process is available to all system images already.
If a definition of the same name already exists in the target image, the operation cannot be performed.
System Action:
The process definition is not copied.
User Action:
If the process definition already exists in the target system image, review the definition to determine whether you want to replace it.
Reason:
The submit action for the process P1 was cancelled as requested.
System Action:
None.
User Action:
None.
Reason:
Step P2 which executed macro P3 returned an undefined step name as the next step to execute. The undefined step name is P1.
System Action:
The process is terminated in error.
User Action:
Correct the target step name returned from step P2 by macro P3.
Reason:
Step P1 returned another step name that is to be the next step to execute, however, this step has already altered the flow of control in the process by the allowed limit of P2 as specified in the macro or as defaulted. This limit cannot be exceeded and is used to prevent the process from looping continuously.
System Action:
The process is terminated in error.
User Action:
Correct the specifications in the process to prevent step P1 from being executed more than the specified limit.
Reason:
The process selected cannot be submitted to the scheduler because it is not in the currently loaded system image or the process is a special reserved process that cannot be submitted.
System Action:
The request is rejected.
User Action:
None.
Reason:
The P1 process definition was copied successfully from one system image to another system image. Either a copy was created or an existing definition was replaced as indicated by P2 .
System Action:
The process definition is copied.
User Action:
None.
Reason:
A record defining the action to be taken when an alert is raised is missing.
System Action:
The process is not saved.
User Action:
To recreate the action, enter P beside the entry for the GENALERT macro and press F10 (Actions).
Reason:
An action for a GENALERT macro is not in the knowledge base. The macro is in a process with the object ID P2 that is a concatenation of the following:
- Image name
- Image version
- 71 (class number for process definitions)
- Process name
System Action:
The process is copied without the action record.
User Action:
Note the process, and update it to recreate the missing action.
Reason:
The service procedure identified by P1 was invoked with an invalid value for the keyword identified by P2 of P3.
System Action:
Request rejected
User Action:
Correct the keyword value and re-try
Reason:
The icon identified by P1 was not found on the database
System Action:
Request rejected
User Action:
Determine the correct name or the reason for the object's absence. Correct the error, and retry.
Reason:
The command entered on the command line was not recognized by the procedure.
System Action:
The command is rejected.
User Action:
Correct the command and retry.
Reason:
While defining an icon the field identified by P1 was not entered and is a required field.
System Action:
Field highlighted in error.
User Action:
Enter a value for the specified field
Reason:
The value identified by P1 is not valid for the field identified by P2
System Action:
Field highlighted in error.
User Action:
Enter a valid value for the specified field
Reason:
The field identified by P1 cannot contain a value greater than P2. Issued in relation to the HEIGHT and WIDTH fields. When issued in relation to HEIGHT the value of P2 will be dependent on the current value of WIDTH (P4) and vice versa.
System Action:
Field highlighted in error.
User Action:
Enter a valid value for the specified field
Reason:
Only one input (CMD) field may be specified in an icon.
System Action:
Request rejected
User Action:
Only specify one CMD field
Reason:
The TXT command was issued against a line which already had a field assigned to it. This means that the text will be interpreted as a LABEL. However, LABELS need an icon to be at least 16 characters wide to be able to be inserted.
System Action:
Request rejected
User Action:
Make icon wider.
Reason:
Function P1, which was being performed on an icon was cancelled by the user.
System Action:
None
User Action:
None
Reason:
The icon P1 has had action P2 successfully performed upon it.
System Action:
None
User Action:
None
Reason:
This message issues if a value is specified for HEIGHT or WIDTH which is below the permissible minimum.
System Action:
Request rejected
User Action:
Select a value equal to or greater than the minimum (P2)
Reason:
The required ICON is currently being updated by the user P1.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
The user has specified an Icon name on an Add or Copy which corresponds to an existing Icon.
System Action:
Request is rejected.
User Action:
Change the name of this Icon and continue.
Reason:
An icon panel which requires P2 rows is attempting to be displayed on a terminal which only has a capacity of P3 rows. This situation has most probably arisen by the icon being created on a terminal which supports a larger screen size.
System Action:
Request rejected.
User Action:
Display the panel definition on a terminal large enough to hold it.
Reason:
The service procedure identified by P1 was invoked with an invalid value for the keyword identified by P2 of P3.
System Action:
Request rejected
User Action:
Correct the keyword value and re-try
Reason:
The icon panel definition identified by P1 was not found
System Action:
Request rejected
User Action:
Determine the correct name or the reason for the object's absence. Correct the error, and retry.
Reason:
The command entered on the command line was not recognized by the procedure.
System Action:
The command is rejected.
User Action:
Correct the command and retry.
Reason:
While defining an icon panel definition the field identified by P1 was not entered and is a required field.
System Action:
Field highlighted in error.
User Action:
Enter a value for the specified field
Reason:
The value identified by P1 is not valid for the field identified by P2
System Action:
Field highlighted in error.
User Action:
Enter a valid value for the specified field
Reason:
Function P1, which was being performed on an icon panel definition was cancelled by the user.
System Action:
None
User Action:
None
Reason:
The icon panel P1 has had action P2 successfully performed upon it.
System Action:
None
User Action:
None
Reason:
The icon attempting to be placed on the screen will not fit at the row,col combination identified by P1. This may be beacause it will overlay an existing icon or it will go over the edges of the screen. The reason is contained in P2.
System Action:
Reject request
User Action:
Make the icon smaller or move it to a different position.
Reason:
An attempt was made to use the PUTICON command to place an icon on the screen, however, there was no "current icon". An icon can be selected as the "current icon" by using the PICKICON command.
System Action:
Reject request
User Action:
Select an icon for placement using the PICKICON command.
Reason:
An attempt was made to use a command which requires an icon to identified. To identify an icon the cursor must be placed within the body of the icon. The cursor was detected as having not been within the body of an icon.
System Action:
Reject request
User Action:
Place the cursor over the icon to be actioned.
Reason:
Either a PICKICON or PICKGRP command was issued, to display a list of available ICONS or RESOURCE GROUPS but one was not chosen from the list.
System Action:
None
User Action:
None
Reason:
This is a warning message only. It indicates that P1 icons have been included on the panel without having resource groups attached. Issuing FILE or SAVE immediately will cause the definition to be saved, but no Icon Panel will be generated until all icons have resource groups attached. Resource Groups are attached to icons using the PICKGRP command .
System Action:
None
User Action:
Either issue FILE or SAVE immediately to ignore the warning, or attach icons to the specified boxes and try to SAVE/FILE again.
Reason:
An icon panel which requires P2 lines/columns is attempting to be displayed on a terminal which only has a capacity of P3 lines/columns.
System Action:
Request rejected.
User Action:
Display the panel definition on a terminal large enough to hold it.
Reason:
This message is issued in response to a QUERY command against an icon on the panel. P1 is the name of the ICON used and P2 is the name of the RESOURCE GROUP attached to it.
System Action:
None.
User Action:
None.
Reason:
The user has specified an Icon Panel name on an Add or Copy which corresponds to an existing Icon Panel.
System Action:
Request is rejected.
User Action:
Change the name of this Icon Panel and continue.
Reason:
As a result of a PICKGRP command a Resource Group was selected to be attached to an Icon. However, the selected Resource Group was previously attached to another Icon. Each Resource Group to be monitored may only be attached to ONE Icon per Icon Panel.
System Action:
Request rejected.
User Action:
Select a different Resource Group or delete the Icon to which this Resource Group was previously attached, or attach another Resource Group to it.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
The specified record was not found.
System Action:
None.
User Action:
None.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Update is in progress on this definition by other user.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
Validation found no entry specified on mandatory field/s.
System Action:
The request is rejected.
User Action:
Specify entry on field/s in error.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
Not allowed to have the same full value.
System Action:
The request is rejected.
User Action:
Specify a unique full value.
Reason:
The specified record was not found.
System Action:
None.
User Action:
None.
Reason:
A Field Prompt Definition with the abbreviation entered already exists.
System Action:
The request to file or save the record is rejected.
User Action:
Change the abbreviation of the Field Prompt Definition and attempt to save it again.
Reason:
A Field Prompt Definition with the P1 entered already exists.
System Action:
The value is rejected.
User Action:
Change the P1 of the Field Prompt Definition and try again.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
The auto population facility has created the above resource.
System Action:
Informational only.
User Action:
None.
Reason:
The auto population facility has attempted to create a resource definition, but failed.
System Action:
Processing continues.
User Action:
None.
Reason:
The command processor encountered an error while processing a system command. P1 indicates the cause of the error.
System Action:
Processing terminates in error.
User Action:
Use P1 to determine the cause of the error, and rectify the problem.
Reason:
No resources were selected from the Auto Populate resource selection list previously presented.
System Action:
None.
User Action:
None.
Reason:
The auto population facility has created the above definition.
System Action:
Informational only.
User Action:
None.
Reason:
The Auto population request has completed.
System Action:
Informational only.
User Action:
None.
Reason:
You were auto-populating the P2 system image and entered SU beside the
P1 resource. The region cannot find the resource definition after population.
System Action:
The SU action terminates with the error message.
User Action:
Contact uour local technical support representative.
Reason:
The Auto Populate Facility tried but failed to create a sysplex resource definition.
System Action:
Processing continues.
User Action:
Contact Technical Support.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Validation found no entry specified on mandatory field/s.
System Action:
The request is rejected.
User Action:
Specify entry on field/s in error.
Reason:
The Unselect command (U) was entered against a resource in the Auto Populate selection list, but it had not previously been selected and therefore could not be 'unselected'.
System Action:
None.
User Action:
None.
Reason:
The command processor encountered an error while processing a system command. P1 indicates the cause of the error.
System Action:
Processing terminates in error.
User Action:
Use P1 to determine the cause of the error, and rectify the problem.
Reason:
A request to select a resource for Auto Population was rejected because the resource is already defined in the selected System Image.
System Action:
None.
User Action:
None.
Reason:
When using the ALL command, S or U must be used to indicate whether all entries are to be selected or unselected (for example, ALL S).
System Action:
Command is rejected.
User Action:
Re-issue the command by specifying either ALL S or ALL U as required.
Reason:
The Auto Populate Facility is available to CONNECT:Direct for MVS CDMGR resources only (CDMGR type of JOB or STC).
System Action:
The request is rejected.
User Action:
Specify a CONNECT:Direct file transfer manager of type JOB or STC.
Reason:
You were auto-populating a local system image and entered S beside the
P1 resource on the Auto Populate Selection List panel. However, the P1 resource is already part of an active shared system image, and you cannot add it to the local system image.
System Action:
The region does not select the P1 resource for auto-population.
User Action:
Determine whether the P1 resource should be shared and, if required, update the affected system images.
Reason:
You entered the ALL command with an invalid operand. The valid commands are as follows: ALL U, ALL S, and ALL SU.
System Action:
The command is rejected.
User Action:
Reissue the command with the correct operand.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Contact Technical Support.
Reason:
You entered the ALL command with an invalid operand. The valid commands are as follows: ALL U, ALL S, and ALL SU.
System Action:
The command is rejected.
User Action:
Reissue the command with the correct operand.
Reason:
You entered U beside a resource that has not been selected. You cannot deselect that resource.
System Action:
None.
User Action:
None.
Reason:
You must select at least one resource before you press F6 (Action).
System Action:
None.
User Action:
Enter S beside the resources you want to define, then press F6 (Action).
Reason:
The command processor encountered an error while processing a system command. P1 indicates the cause of the error.
System Action:
Processing terminates in error.
User Action:
Use P1 to determine the cause of the error, and rectify the problem.
Reason:
The function specified in P1 is not operative; therefore, your system is not running in a Sysplex environment.
System Action:
The process terminates.
User Action:
This function is not relevant in a non-sysplex environment.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Request action on the database failed with non zero return code.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
The active System Image Definition cannot be deleted.
System Action:
The request is rejected.
User Action:
Delete the System Image Definition when it is inactive.
Reason:
No records of System Definition found in the database.
System Action:
None.
User Action:
None.
Reason:
Update is in progress on this definition by other user.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
No records found to be displayed in the selection list.
System Action:
None.
User Action:
None.
Reason:
The System image selected for deleting is the last System Image that points (via APPC LU value) to a ServiceView system and therefore cannot be deleted.
System Action:
The request is rejected.
User Action:
This system image can only be delete if another system image points to this LU. If appropriate create another definition and retry.
Reason:
The System Image Definition is the template definition base which should not be deleted.
System Action:
The request is rejected.
User Action:
None.
Reason:
No system images with names or versions that start with P2 were found.
P1 is either SYSNAME or VERSION.
System Action:
None.
User Action:
If required, create the system image. You can use any of the following methods to create a system image:
- Use the AutoAssist Express Setup Facility (/RADMIN.AD.E).
- Use the System Images option on the Resource Administration menu (/RADMIN).
- Use the AutoAssist Auto Populate Facility (/RADMIN).
Reason:
The global process image definition you have attempted to delete is a required component of Automation Services. You are not able to delete this global process image definition. However, you are able to delete other versions of the $PROCESS global process image definition if you wish.
System Action:
The request is rejected.
User Action:
None.
Reason:
The service image definition you have attempted to delete is a required component of Automation Services. You are not able to delete this service image definition. However, you are able to delete other versions of the $SERVICE image definition if you wish.
System Action:
The request is rejected.
User Action:
None.
Reason:
No system images of the type P1 were found.
System Action:
None.
User Action:
If required, create the system image. You can use any of the following methods to create a system image:
- Use the AutoAssist Express Setup Facility (/RADMIN.AD.E).
- Use the System Images option on the Resource Administration menu (/RADMIN).
- Use the AutoAssist Auto Populate Facility (/RADMIN).
Reason:
A request to load a new system image was rejected because there is already a system load in progress. The current load was started at P1.
System Action:
Request rejected.
User Action:
None.
Reason:
A request to load a system image was rejected because the home system was not supported by a linked region.
This may be because this is a system image from a region that has subsequently been unlinked.
System Action:
Request is rejected.
User Action:
Where the remote region is no longer linked, log on to that region and load the system image locally.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Action P1 was issued against the base resource, that is, the resource whose relationships are being displayed or defined. This is not a valid action for this resource.
System Action:
The error is highlighted, and the request is rejected.
User Action:
Use a valid action.
Reason:
You tried to create a P1 relationship with the base resource. However, the P2 resource already has the maximum number of P1 relationships. A resource can have a maximum of 25 relationships of each type.
System Action:
The request is rejected.
User Action:
Review the existing P1 relationships for the P2 resource.
Reason:
You entered an action that makes no sense for the selected resource (for example, a PP action against a reesource which is already a primary parent).
System Action:
The request is rejected.
User Action:
Use an action which is applicable to the selected resource.
Reason:
Update is in progress on this definition by other user.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
No records exist.
System Action:
None
User Action:
None
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
The 'Unlink' line command is only valid for a currently linked Parent or Child.
System Action:
The request is rejected.
User Action:
None
Reason:
The 'Connect' Line command is not valid for a currently connected resource. 'Connect' is only valid for Eligible resources.
System Action:
The request is rejected.
User Action:
None
Reason:
The 'Connect' Line command is not valid for a currently connected resource. 'Connect' is only valid for Eligible resources.
System Action:
The request is rejected.
User Action:
None
Reason:
The user has cancelled the update of the relationships.
System Action:
Relationships are not updated.
User Action:
None
Reason:
The 'Existing Related' line command cannot be performed against the resource the Relationship List is currently presented for.
System Action:
None
User Action:
None
Reason:
A resource may have a maximum of P1 parents connected to it. This message indicates that an attempt has been made to connect a parent to a resource which would cause the maximum to be exceeded.
System Action:
Request to connect is rejected.
User Action:
Restructure the hierarchy, possibly by inserting a LOGICAL resource, so that not all the parents are connected directly to the resource in question.
Reason:
You tried to specify a relationship between resources in a local system image and a shared system image, but the local image does not have a home system. To specify such a relationship, both resources must have the same home system.
From Version 4.0 onward, a local image must have a home system. The home system nominates the system on which the image can be loaded.
System Action:
The system image definition is displayed for update.
User Action:
Specify a home system for the image, then press F3 (File) to save the updated definition.
Reason:
You tried to relate two resources that have different home systems. Only resources with the same home system can form a relationship.
System Action:
The request is rejected.
User Action:
None.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
No records exist.
System Action:
None
User Action:
None
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
The 'Existing Related' line command cannot be performed against the resource the Relationship List is currently presented for.
System Action:
None
User Action:
None
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
No User Profile found in the system.
System Action:
The request is rejected.
User Action:
None.
Reason:
A request to view the User Profile List was rejected because the user did not have UAMS access authority.
System Action:
The request is rejected.
User Action:
None.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Request action on the database failed with non zero return code.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
No records of Filter Definition found in the database.
System Action:
None.
User Action:
None.
Reason:
No records found to be displayed in the selection list.
System Action:
None.
User Action:
None.
Reason:
The Group Filter identified by P1 is currently included as a secondary filter in P2 SNA Groups and may not be deleted as this may affect the Group(s) integrity. The LG option may be used to list the Groups in which a filter is included.
System Action:
Request is disallowed.
User Action:
Use LG to list the affected groups and update them to remove the filter.
Reason:
The selected ruleset is currently active. You cannot delete it.
System Action:
The request is disallowed.
User Action:
To enable the ruleset to be deleted, proceed as follows:
1. At a ===> prompt, enter /PARMS to list the customizer parameter groups.
2. Enter F AUTOIDS to find the AUTOIDS parameter group.
3. Enter U beside the group to display its parameters panel.
4. In the Active Ruleset for File Transfer field, either fill it with blanks or replace the ruleset you want to delete by another ruleset.
5. Press F6 (Action) to unload the active ruleset and possibly load a new ruleset.
The ruleset you want to delete is now unloaded, and you can proceed to delete it.
Reason:
The Ruleset Load request was not actioned because there is no active file transfer monitoring.
System Action:
The request is ignored.
User Action:
Use Customization Parameters to set up File Transfer Monitoring.
2. Enter F AUTOIDS to find the AUTOIDS parameter group.
3. Enter U beside the group to display its parameters panel.
4. In the Active Ruleset for File Transfer field, either fill it with blanks or replace the ruleset you want to delete by another ruleset.
5. Press F6 (Action) to unload the active ruleset and possibly load a new ruleset.
The ruleset you want to delete is now unloaded, and you can proceed to delete it.
Reason:
You canceled your request.
System Action:
None.
User Action:
None.
Reason:
Your request to load the P1 file transfer ruleset was accepted.
System Action:
The request will be processed.
User Action:
None.
Reason:
You cannot delete a filter that is associated with a monitor. For example, you cannot delete the RESOURCEVIEW filter because it is associated with the general resource monitor.
System Action:
The request is denied.
User Action:
None.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Request action on the database failed with non zero return code.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
No records of Command Definition found in the database.
System Action:
None.
User Action:
None.
Reason:
Update is in progress on this definition by other user.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
No records found to be displayed in the selection list.
System Action:
None.
User Action:
None.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
No Monitoring/Availability Maps found for sysname and version specified.
System Action:
The request is rejected.
User Action:
None. If you want to set up a monitoring or availability map for this resource, go to the resource administration functions (shortcut /radmin).
Reason:
No Availability Map added or found for the sysname and version specified
System Action:
The request is rejected.
User Action:
None.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
No Availability Map found for sysname and version specified.
System Action:
The request is rejected.
User Action:
None.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
List of resources attach to availability map P1 .
System Action:
None.
User Action:
None.
Reason:
This resource already detached by previous action.
System Action:
None.
User Action:
None.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
No records of Icon Definition found in the database.
System Action:
None.
User Action:
None.
Reason:
Update is in progress on this definition by other user.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
No records found to be displayed in the selection list.
System Action:
None.
User Action:
None.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
No records of Macro Definition found in the database.
System Action:
None.
User Action:
None.
Reason:
Update is in progress on this definition by other user.
System Action:
The request is rejected.
User Action:
Try again later.
Reason:
No records found to be displayed in the selection list.
System Action:
None.
User Action:
None.
Reason:
The service procedure identified by P1 was invoked with an invalid value for the keyword identified by P2 of P3.
System Action:
Request rejected
User Action:
Correct the keyword value and re-try
Reason:
The process identified by P1 was executed and there were no log records generated.
System Action:
None
User Action:
None
Reason:
The process selected cannot be submitted to the scheduler because it is not in the currently loaded system image or the process is a special reserved process that cannot be submitted.
System Action:
The request is rejected.
User Action:
None.
Reason:
None.
System Action:
None.
User Action:
None.
Reason:
An attempt was made to select the global process described by P1 which had previously been selected.
System Action:
Request rejected.
User Action:
None.
Reason:
An attempt was made to unselect the global process described by P1 which had not previously been selected.
System Action:
Request rejected.
User Action:
None.
Reason:
Template definitions are special and cannot be accessed from this panel.
System Action:
The request is rejected.
User Action:
Access template definitions from the Template Definition Menu. To access that menu, enter the /RADMIN.T path at the ===> prompt.
Reason:
The service procedure identified by P1 was invoked with an invalid value for the keyword identified by P2 of P3.
System Action:
Request rejected
User Action:
Correct the keyword value and re-try
Reason:
The service procedure identified by P1 was invoked with an invalid value for the keyword identified by P2 of P3.
System Action:
Request rejected
User Action:
Correct the keyword value and re-try
Reason:
$RMDYNAMIC is the definition used to generate the default Graphical Monitor screen when multiple products are present in the same region. It displays one icon per product. This definition cannot be updated.
System Action:
Request rejected.
User Action:
None.
Reason:
An invalid keyword was passed to the procedure $RMADAPI.
System Action:
The request is rejected.
User Action:
Correct the procedure call to $RMADAPI.
Reason:
The action P1 is not available for class P2 - P3.
System Action:
The request is rejected.
User Action:
None.
Reason:
Resource P2 of type P1 on system image P3 has changed to an ATTENTION state.
System Action:
An alert is issued with the severity defined in the $RM STATECHANGE parameter group for an ATTENTION state.
User Action:
For more information about the cause of the ATTENTION state, use the TL (Transient Log) action to view the Transient Log for the resource.
You can also use the A (Analyze) action to access the resource monitor for the resource. From here you can perform various actions against the resource.
Reason:
Resource P2 of type P1 on system image P3 has changed to a DEGRADED state.
System Action:
An alert is issued with the severity defined in the $RM STATECHANGE parameter group for a DEGRADED state.
User Action:
For more information about the cause of the DEGRADED state, use the TL (Transient Log) action to view the Transient Log for the resource.
You can also use the A (Analyze) action to access the resource monitor for the resource. From here you can perform various actions against the resource.
Reason:
Resource P2 of type P1 on system image P3 has changed to a FAILED state.
System Action:
An alert is issued with the severity defined in the $RM STATECHANGE parameter group for a FAILED state.
User Action:
For more information about the cause of the FAILED state, use the TL (Transient Log) action to view the Transient Log for the resource.
You can also use the A (Analyze) action to access the resource monitor for the resource. From here you can perform various actions against the resource.
Reason:
Resource P2 of type P1 on system image P3 has changed to an INERROR state.
System Action:
An alert is issued with the severity defined in the $RM STATECHANGE parameter group for an INERROR state.
User Action:
For more information about the cause of the INERROR state, use the TL (Transient Log) action to view the Transient Log for the resource.
You can also use the A (Analyze) action to access the resource monitor for the resource. From here you can perform various actions against the resource.
Reason:
Resource P2 of type P1 on system image P3 has changed to a MONERROR state.
System Action:
An alert is issued with the severity defined in the $RM STATECHANGE parameter group for a MONERROR state.
User Action:
For more information about the cause of the MONERROR state, use the TL (Transient Log) action to view the Transient Log for the resource.
You can also use the A (Analyze) action to access the resource monitor for the resource. From here you can perform various actions against the resource.
Reason:
Resource P2 of type P1 on system image P3 has changed to a MONFAILED state.
System Action:
An alert is issued with the severity defined in the $RM STATECHANGE parameter group for a MONFAILED state.
User Action:
For more information about the cause of the MONFAILED state, use the TL (Transient Log) action to view the Transient Log for the resource.
You can also use the A (Analyze) action to access the resource monitor for the resource. From here you can perform various actions against the resource.
Reason:
Resource P2 of type P1 on system image P3 has changed to a PENDING state.
System Action:
An alert is issued with the severity defined in the $RM STATECHANGE parameter group for a PENDING state.
User Action:
For more information about the cause of the PENDING state, use the TL (Transient Log) action to view the Transient Log for the resource.
You can also use the A (Analyze) action to access the resource monitor for the resource. From here you can perform various actions against the resource.
Reason:
Resource P2 of type P1 on system image P3 has changed to an UNKNOWN state.
System Action:
An alert is issued with the severity defined in the $RM STATECHANGE parameter group for an UNKNOWN state.
User Action:
For more information about the cause of the UNKNOWN state, use the TL (Transient Log) action to view the Transient Log for the resource.
You can also use the A (Analyze) action to access the resource monitor for the resource. From here you can perform various actions against the resource.
Reason:
An error occurred generating a State Change Alert for resource P2.
P1 has one of the following values:
P3 contains an error explanation.
System Action:
The action on the alert fails.
User Action:
Investigate the cause of the error. If an alert exit procedure $RMAM00X is in use, the error message may be from the procedure. If the error is N48C01, a problem occurred with an APPC START of the Alert Monitor API, for example, a disconnected domain.
Reason:
The CALLTYPE keyword has the unsupported value, P1 .
System Action:
The return code is set, and no processing is performed.
User Action:
Contact Technical Support.
Reason:
The argument, P1 , has the value, P2 , which is not supported by this Call-Back package.
System Action:
The return code is set, and processing terminates.
User Action:
Contact Technical Support.
Reason:
You have selected the P1 action for an alert, but the resource associated with the alert is not part of an active system image, so the P1 action is not available.
System Action:
The action terminates.
User Action:
Select another action.
Reason:
The AOMPROC is the receiver of messages from the primary message filter. This message indicates that the AOMPROC has been started and is ready to process message traffic.
System Action:
None - message is informational only.
User Action:
None.
Reason:
This message is part of the Unmatched Message Alerting (UMA) facility. It is issued when a message matches the Unmatched Message Alerting filter defined in the MSGAWARENESS parameter group.
An unmatched message is a message that does not match any EventView or ResourceView rules.
The message text comprises the message ID followed by ++UMA++, followed by the message ID and message text of the unmatched message. You can customize the text to the right of ++UMA++ through the MSGAWARENESS parameter group (/PARMS).
System Action:
The system writes this message to the Activity Log, raises an alert with this message as the alert description, or issues an EDS event with this message as its text. The option used is specified through the MSGAWARENESS parameter group.
User Action:
Review the captured message. If it is not important, define an EventView rule to suppress it. Conversely, the message may identify a resource under Automation Services control, in which case you may want to define it in the Status Monitor messages for that resource.
Reason:
The Unmatched Message Alerting server procedure, P1, failed to start. P2 is the error message returned from the APPC START command. The message that caused the alert is written after this message.
System Action:
Message processing continues without alerting for this message.
User Action:
Correct the problem highlighted by the error message in P2.
Reason:
The message burst protection facility has detected a flood of duplicated unsolicited messages. To avoid damaging automation and the flooding of system consoles, the message burst facility will suppress all further duplicate messages until the rate of arrival drops below the parameters set during region initialization.
System Action:
Duplicates of the message shown after the ==> symbol are suppressed.
User Action:
A message burst is normally an indication of a runaway task. The message burst facility suppresses the symptoms of this problem, but it should still be investigated.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
An error was encountered while attempting to access the RAM database.
System Action:
Procedure is terminated without successfully establishing APPC requirements.
User Action:
Correct the database error and issue restart.
Reason:
The APPC function was not successfully completed. SYSMSG contains the unexpected message that resulted.
System Action:
Processing is continued.
User Action:
Contact your System Administrator.
Reason:
A region was unlinked and therefore the Traffic Managers are no longer required and are being shut down.
System Action:
The event, data and traffic manager procedures are flushed. Some APPC errors may be displayed on the activity log as the procedures are forcefully terminated.
User Action:
None.
Reason:
An attempt to start a link to a remote region failed. The remote region is P1 and the error message is P2 .
System Action:
The link activation will continue to be attempted as a background task.
User Action:
The most likely cause of the problem is that the remote region is not available. Check its status. If the link still fails after the remote region becomes available, contact your system administrator.
Reason:
You specified P1 as a column name on the SORT command; however, the column name is not recognized.
The following are valid sort columns:
System Action:
The sort command is rejected.
User Action:
Specify a valid column name.
Reason:
You specified P1 as a sort order on the SORT command; however, the sort order is invalid.
System Action:
The sort command is rejected.
User Action:
Specify a valid sort order. Valid values are A, ASCENDING, D, and DESCENDING. For example, to sort on the JOBNAME column in descending order, then issue the command SORT JOBNAME D.
Reason:
The Statistics Handler has attempted to allocate a Table, but the allocation has failed.
System Action:
Processing terminated in error.
User Action:
Contact your System Administrator.
Reason:
The Statistics Handler has attempted the specified action, but the attempt has failed.
System Action:
Processing terminated in error.
User Action:
Contact your System Administrator.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
As this resource exists on a remote region, an APPC conversation is required to process this statistics request. APPC function P1 has ended in error. P2 contains the return code, P3 the feedback code, and P4 the message describing the failure.
System Action:
Processing terminated in error.
User Action:
Determine whether the remote system is still available. Contact your system administrator.
Reason:
The command entered on the command line was not recognised by the procedure.
System Action:
The command is rejected.
User Action:
Correct the command and retry.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
There are currently no statistics available for this resource.
System Action:
The request is rejected.
User Action:
None.
Reason:
The Statistics table is not available.
System Action:
The request is rejected.
User Action:
Contact your system administrator.
Reason:
As this resource exists on a remote region, an APPC conversation is required to process this statistics request. An APPC function has ended in error.
System Action:
Processing terminated in error.
User Action:
Determine whether the remote system is still available. Contact your system administrator.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
Procedure in unexpected APPC "What Received" State.
System Action:
None.
User Action:
Contact System Administrator.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
A temporary table is required to load current statistics table into. The allocation of this table has failed.
System Action:
Processing terminated in error.
User Action:
Contact your System Administrator.
Reason:
Vartable error.
System Action:
No further processing.
User Action:
None.
Reason:
Object ID not found and can not be created because there is not enough information passed to the procedure.
System Action:
The request is rejected.
User Action:
Contact System Administrator.
Reason:
You elected not to print statistics.
System Action:
Processing continues.
User Action:
None.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.
Reason:
ServiceView and ResourceView SMF records will not be written because SMF has not been enabled due to one or both of the following:
- To write SMF records, the SMF Record Identification must have a non-zero value. This value is specified in the Customizer SMF parameter group.
- To collect ServiceView and ResourceView SMF records, specify YES in the Customizer SMFDATA parameter group.
System Action:
The procedure terminates and writes an error message to the system log.
User Action:
Contact your system administrator.
Reason:
An invalid keyword was passed to the service procedure.
System Action:
The request is rejected.
User Action:
Correct the calling procedure to the service procedure and rerun exec.