Client Messages

Client (TSO ISPF dialog) messages initially display a short message text. Press PF1 for an extended explanation of the message. Client messages are listed in the table that follows with the short and extended message text.

If a problem persists, contact Customer Support with the full message text and information about the circumstances when the error occurred.

Message Number	Message Text	Extended Explanation
TNM001	Invalid primary command	Valid primary commands are shown at the top of the panel.
TNM002	Parameter missing	Specify ON or OFF as a parameter for this command.
TNM003	Missing valid Jobname	A valid jobname must be specified.
TNM004	Incorrect format	Jobname must be 1-8 characters and start with an alpha or a national character.
TNM005	Invalid data set name	A valid data set name must be specified.
TNM006	Monitor started/queued	Monitoring has been started or queued for &jobn.
TNM007	Must specify an interval	A valid interval must be specified.
TNM008	CSECT mode required	Issue the MOde Csect command and retry.
TNM009	&ZCMD not valid	To cancel changes type END; to save changes, clear command line, press Enter.
TNM009A	Duration not valid	The monitor duration must be a number between 10 and 99999 or STEP.
TNM009B	Mode missing or invalid	Mode must be Csect, Module, Pseudo or 4GL
TNM009C	Invalid name	Enter up to 8 alphanumeric characters (first must be alphabetic or national).
TNM009D	Invalid pattern	Enter up to 8 alphanumeric or pattern characters.
TNM009E	Invalid monitor dsn	Monitor data set name is invalid. Either one of the variables specified is not defined, the length of a data set name qualifier is invalid, or the data set name contains invalid characters.
TNM009F	Invalid duration	Monitor duration is invalid. It must be a whole number from 1 to 99999 or must be a whole number from 1 to 9999 with either an S or M appended to the number to indicate seconds or minutes, respectively.
TNM009G	Invalid sample count	Number of samples is invalid. Must be a whole number from 10 to 999999.
TNM009H	No monitors in group	No Monitors have been defined to the group. Please use the ADD command to associate monitors with this group.
TNM009I	Monitor profile missing	A monitor associated with this group could not be found. Please either remove the monitor from the group or redefine the new monitor.
TNM009J	No trigger assigned	The monitor group requires a monitor to be assigned as the trigger. Please use the T line command to assign a monitor as the trigger.
TNM009K	Duplicate group found	Another group by the name of &group has already been defined. Please respecify a new group name.
TNM009L	Profile already in group	One or more profiles you have selected are already in the group.
TNM009M	Invalid numeric	Number is invalid. Please correct and press Enter.
TNM009N	Invalid monitor time	Invalid monitor time duration. Monitor time must be a numeric value from 1 to 9999 (166 minutes). The number can be appended with either a M for minutes or S for seconds. No suffix defaults to seconds. Example: 120S would be a duration of 2 minutes. Likewise, 2M would indicate 2 minutes as well.
TNM009O	Statistics unavailable	Data set or volume performance information is not available. Performance sections will not be displayed.
TNM009P	&nametype name truncated	The &nametype name can not be greater than eight characters. The specified name will be truncated.
TNM009Q	&node invalid	&node is not a valid variable for the monitor data set name. Valid variables are: &&USERID, &&PREFIX, &&PROFILE, &&PGMNAME, &&SYSDATE, &&SYSTIME, &&SYSNAME, &&JOBNAME, &&STEPNAME, &&PROCSTEP, &&DSNPRFX, and &&JOBID.
TNM009R	Invalid date range	The specified date range has passed. The monitor will not start.
TNM009S	Group &group missing	The entry for &group can not be found. You will need to redefine the Group Definition to continue.
TNM009T	Valid for USS/JVM only	The Long Name command is only valid for USS or JAVA short names (module name entry contains a dash -).
TNM009U	Step is missing	Step name is required when Procstep name is specified.
TNM009V	No Process info	There is no detail or statistical information available for the selected Process ID.
TNM009W	&node invalid	&node is not a valid node for the monitor data set name. The node must be eight characters or less.
TNM009X	Mode missing or invalid	Mode must be Current, Via, or Application.
TNM009Y	Mode missing or invalid	Mode must be Task or Module.
TNM011	Module missing	A module identifier must be specified.
TNM012	Csect missing	A Csect identifier must be specified.
TNM013	Description missing	A description must be specified.
TNM014	Return Code=&RETCD	The function returned with the indicated return code.
TNM015	Analyzing data	N/A
TNM016	Listing unavailable	Enable dynamic registration using the Profile Parameters panel, or use manual registration to make a listing data set available.
TNM016B	Stacked Statement	The program statement (&STMT) is included in statement &ACTSTMT in the program listing. Statement &STMT is the &IDXMSG statement.
TNM017	Invalid line command	Valid commands are listed at the top of the panel.
TNM018	Detail data unavailable	No detail data monitored for this condition.
TNM019	Pseudo group missing	A pseudo group must be specified.
TNM019A	CSECT not provided	This Histogram contains information for a Module without a Csect. Statement numbers are not available, even if the program is registered.
TNM019B	Delay data unavailable	No delay is available for this target.
TNM019C	Duplicate entry	&modp already exists. Choose another Module prefix.
TNM019D	Task(s)/Tran(s) tagged	The task or transaction was previously selected; the Select command is ignored. Use RECall to restore all task/tran data.
TNM019E	Only 1000 Tags permitted	Only 1000 tasks/trans may be tagged
TNM019F	No 4GL info available	CodeView will display in CSECT mode.
TNM019G	No more detail	There are no more levels of detail to report for this function.
TNM020	Invalid mode	The Delays line command requires CSECT or MODULE display mode.
TNM021	Report printed	A report of the analysis results shown has been sent to SYSOUT.
TNM022	Already defined	A profile with the name you specified already exists as a monitor set.
TNM023	Profile name required	The name of a profile must be specified when using ADD.
TNM024	Profile name required	The name of a profile must be specified when using the SAVE command.
TNM025	Specifications saved	The current specifications have been saved under the given profile name.
TNM026	Profile not found	A profile with the indicated name does not exist as a monitor specification.
TNM027	Too many selections	Only one profile may be selected.
TNM028	Profile retrieved	The desired profile has been read.
TNM029	Not a proper listing	The specified member does not contain a proper compile listing.
TNM030	Registration error	Check format of listing dsn and compile options.
TNM030B	&Csect not in &MODULE	The Csect was not found in the load module listing.
TNM031	Successfully completed	The listing was successfully registered. '&REGMSG1 '&REGMSG2 '&REGMSG3
TNM032	Invalid numeric	Specify a valid integer number instruction size.
TNM033	Unable to start monitor	Server space &TUNSSID not found.
TNM034	Request is waiting	The monitor request is queued in the server space for execution.
TNM035	Request is active	CA MAT is currently monitoring the desired target.
TNM036	Request complete	The request is no longer tracked in CA MAT. The output data set is available.
TNM037	Request incomplete	The request is no longer tracked in CA MAT. No data is available.
TNM038	CA MAT inactive - Data	CA Mainframe Application Tuner is not active but the output data set is available.
TNM039	Member not found	The specified member cannot be found in the data set.
TNM040	Data loaded	The monitoring data has been successfully loaded into your environment.
TNM041	Registering: &csect	N/A
TNM042	Monitor data set empty	The input data set does not contain any samples.
TNM042A	Sample count is low	The input data set contains &samples meaningful samples, which may not be enough to be statistically valid.
TNM043	Invalid line command	The only allowable command is (S)elect.
TNM044	Statements: &STMT	N/A
TNM044A	Scanned lines: &PLINES	N/A
TNM045	Samples (&NORMLIZE): &TOTSAMP	N/A
TNM046	Invalid primary command	Valid primary commands are listed at the top of the panel.
TNM047	Field must be specified	This entry should not be left blank.
TNM048	Field contents invalid	A positive numeric integer must be specified.
TNM049	Profile saved	Your profile information has been saved.
TNM049A	Listing(s) registered	The selected listings have been re-registered.
TNM049B	Registered with Offsets	Selected listing has been re-registered but using the offset table, not the object listing. Imbedded PROC displacements could be incorrect.
TNM050	Invalid primary command	Valid primary commands are listed at the top of the panel.
TNM051	Unable to allocate	CA MAT was unable to allocate the sysout data set. Check profile.
TNM052	Data not loaded	The indicated profile data has not been loaded yet. Use L line command.
TNM053	Unable to Start	This monitor request has the same profile name as another from the same user.
TNM054	Unable to Start	This monitor request uses the same data set as another monitor request.
TNM055	Monitor stopped	This monitor request has been stopped.
TNM056	Monitor not stopped	This monitor requested was not found.
TNM057	Monitor not stopped	This server space was not found.
TNM058	Invalid histogram target	A histogram can not be produced for a pseudo entity.
TNM058A	Invalid histogram target	No Active samples for this Module/Csect. Use Analyze All option.
TNM058B	Invalid histogram target	No Active samples for Module: &MODULE Csect: &CSEX - Use Analyze All option.
TNM059	Data set not found	The monitor data set must exist before the profile can be saved.
TNM060	Invalid numeric	This input field requires the specification of an integer.
TNM060A	Invalid time specified	This field requires a time in the format HHMM.
TNM060B	Ending time incorrect	The ending time must be greater than the starting time.
TNM060C	SYSOUT class incorrect	SYSOUT class must be A through Z or 0 through 9.
TNM060D	Group invalid	Instruction group must be a numeric value or STMT.
TNM061	Allocation failed	The monitor data set did not exist and cannot be allocated.
TNM062	Field contents invalid	This field can only contain ON or OFF.
TNM062A	Field contents invalid	This field can only contain PSEUDO, MODULE, CSECT, 4GL.
TNM063	Help &SUBTOPIC not found	Help topic &SUBTOPIC in member &TOPIC could not be found in library TUNHELP.
TNM064	Invalid primary command	Help does not process any special primary commands.
TNM065	Missing field	This field must be non-blank.
TNM066	Program missing	Program name must be specified.
TNM067	Invalid info target	Cannot display load module info for pseudo name.
TNM068	No info available	There is no load module information available for &MODNM.
TNM069	Inconsistent data	Blank out one of the numeric fields to correct.
TNM070	Already active	CA MAT is already active on another split of ISPF.
TNM071	Corrupted sample set	Possible abend x37 on monitor data set. Check server space log.
TNM072	Still active/waiting	Monitor still active or waiting to sample target.
TNM072A	Using previous data	Still active/waiting - analysis will use previous monitor data.
TNM073	Invalid data set name	The name you have entered is not a valid data set name.
TNM074	Access denied	You are not authorized to monitor this job.
TNM074A	Access denied	You are not authorized to access this monitor data set.
TNM074B	Access denied	You are not authorized to cancel this profile.
TNM075	Server space not found	The server space is not started.
TNM076	Data set not found	&msgdsn
TNM077	Incomplete Monitor Data	Analysis results are likely to be incorrect. The most likely reason is insufficient monitor data set size. Please increase the size and reinvoke the monitor. For additional information, check the server job log.
TNM078	Press PF3 for options	This is a high level breakdown by task. Continue by pressing PF3.
TNM079	???	Use Option 1 to define or start a monitor and to analyze the results.
TNM079A	Data set migrated	&msgdsn
TNM080	Select required	Use Select line command to indicate which profile to duplicate.
TNM081	Unable to Start	The maximum number of concurrent monitors would be exceeded. Try later.
TNM082	@DAM not found	The Dynamic Area Manager component cannot be loaded.
TNM083	Release mismatch	The TSO client and the server space components are at different release levels; enter HELP for more information.
TNM084	Conversion complete	All data converted into current release format.
TNM085	&badrec record errors	&badrec records from the input data set have logic errors.
TNM086	Error retrieving listing	&dsn could not be found.
TNM087	Error opening table	CA MAT listing table &cset was not available.
TNM088	Member not found	Member or data set not found for listing.
TNM089	No detail information	There is no detail information available for the selected location.
TNM089A	No Data Found	No DB2 data for the selected item was found.
TNM089B	Unable to open TUNLLIB	TUNLLIB cannot be opened - analysis cannot be done.
TNM089C	Insufficient storage	Unable to obtain enough virtual storage. Analysis cannot be done.
TNM089D	ESTAEX entered	ESTAEX entered and processed - abend occurred during data processing.
TNM089E	Driver error detected	Data processing error detected.
TNM089F	Non-cursor DB2 request	The DB2 UPDATE or DELETE request is not a non-cursor request. No DELCARE statement is relevant.
TNM089G	Not valid for DECLARE	No DECLARE can be associated with the selected DB2 statement. DECLAREs can only be associated with OPEN, CLOSE, UPDATE, DELETE and FETCH DB2 commands.
TNM089H	EXPLAIN is from DECLARE	EXPLAIN data being shown is from the DECLARE CURSOR statement number.
TNM089I	No DB2 Data was sampled	There was no DB2 data sampled during this monitor.
TNM089J	No samples were taken	There were no samples taken while this SQL statement was executing. The data presented is from the DB2 intercept.
TNM089K	No SQL data was found	Ensure that the DB2 plan was bound correctly. Static and dynamic SQL are captured by the DB2 sampler. Static SQL is also obtained from the DB2 catalog. DB2NOCAT=YES will suppress DB2 catalog access. SQL is captured from the DB2 intercept depending on the settings for DB2HVSQL and DB2HVDYN. DB2HVDYN=YES will intercept only dynamic SQL statements. DB2HVSQL=YES will intercept all SQL statements. The flag settings for this run can be viewed in option 0 OverView.
TNM089L	No intercept data found	There is no data available from the DB2 intercept. The data presented is from sample data only.
TNM090	Field contents invalid	This field can only contain Y or N.
TNM090A	Field contents invalid	This field can only contain Y, N, U, or ALL.
TNM090B	Field contents invalid	This field can only be Y if USE PROTSYM is also Y. Otherwise it must be N.
TNM090C	Field contents invalid	Specify a number from 1 to 8, which must correspond to the data set list below. Enter zero if no data set names are specified in the list.
TNM090D	Field contents invalid	PROTSYM data set name must be specified to be the Endevor DSS .PROTSYM.
TNM091	Job submitted	Your batch request has been submitted.
TNM092	Invalid jobname	The jobname must follow the rules for jobnames: from one to eight alphanumeric and/or national characters (A-Z, 0-9, #, $, @). The first character must be alphabetic or national (A-Z, #, $, @).
TNM093	Invalid DSORG	The monitor data set does not have a proper data set organization.
TNM094	Invalid profile name	The profile name must follow the rules for job/member names: from one to eight alphanumeric and/or national characters (A-Z, 0-9, #, $, @). The first character must be alphabetic or national (A-Z, #, $, @).
TNM095	Missing profile name	The profile name is required.
TNM095A	Missing data set name	The data set name is required.
TNM096	Invalid job/profile name	The job/profile name must follow the rules for job/member names: from one to eight alphanumeric and/or national characters (A-Z, 0-9, #, $, @). The first character must be alphabetic or national (A-Z, #, $, @).
TNM097	Invalid mode	Mode must be CSECT or MODULE.
TNM098	Invalid class	Only the characters A-Z, 0-9 and * are acceptable.
TNM099	No data available	There is no data available for the requested function.
TNM100	Missing table entry	Processor for CICS &tabtype statistics table is missing.
TNM100A	Transaction not found	CICS transaction &stattran not found.
TNM100B	Invalid request	Function is unsupported for this CICS release. This is a non-CICS transaction.
TNM100C	Statistics not available	Summary statistics have not yet been collected.
TNM100D	Error creating table	User-defined warning criteria will not be available. Error for &ErrType.
TNM100E	Warning table error	Missing entry in warning table - notify Customer Support (&wrnfld).
TNM100F	Invalid operator	Cond value must be GT, GTE, LT, LTE, EQ, NE or OFF. You coded &WrnCond.
TNM100G	Value not numeric	Threshold value must be numeric. You coded &WrnVal.
TNM100H	Invalid value	Signed threshold values not allowed. You coded &WrnVal.
TNM100I	Invalid condition	Threshold condition LT 0 or LTE 0 is invalid. You coded &WrnCond &WrnVal.
TNM100J	Warning Table created	Table of summary statistics warning thresholds was created successfully.
TNM100K	Warning Table created	Table of transaction statistics warning thresholds was created successfully.
TNM100L	Error creating table	Bad word count. User-defined warning criteria will not be available.
TNM100M	Invalid value	Time fields must have format hh:mm:ss.ttttt. You coded &WrnVal.
TNM100N	Invalid condition	Threshold condition LT 00:00:00.00000 or LTE 00:00:00.00000 is invalid. You coded &WrnCond &WrnVal.
TNM100P	Invalid name	&ttran is not a valid CICS transaction name.
TNM110	No rows	Monitor file is empty. RC = &msgrc.
TNM111	No data	System error - address data not found. Contact Customer Support.
TNM11A	Pageout error	Pageout error for &mydsn. Contact Customer Support.
TNM112	Context changed	Context changed to &NORMLIZE.
TNM113	Invalid fields	System error - invalid field list. Contact Customer Support.
TNM114	Invalid table	System error - TUNOUT table empty. Contact Customer Support.
TNM115	Not enough stg	There might not be enough >16M storage to perform the requested function.
TNM116	Invalid field	System error - invalid field name &BADFLD. Contact Customer Support.
TNM117	Open error	Open error for History file. Contact Customer Support.
TNM118	File error	Monitor file not found. Contact Customer Support.
TNM119	ALLOC error	ALLOC error for &mydsn. Contact Customer Support.
TNM120	Not enough memory	There is not enough >16M storage to process the current monitor file for this function.
TNM121	Paging is &TUNOUTP	TUNOUT paging is &TUNOUTP.
TUNM000A	INVALID OPTION	Invalid choice, please select one of the options listed.
TUNM000B	INVALID COMMAND	Command &ZCMD is invalid. Please press HELP for a list of commands.
TUNM000C	INVALID SELECTION	Selection is either not in list or not entered if required.
TUNM000D	INVALID VALUE	Please enter one of the listed values.
TUNM000E	FIELD NOT MODIFIABLE	Include, Exclude, and Move are not supported for this field. Request ignored.
TUNM000F	REPORT GENERATED	Report generate and written to SYSOUT.
TUNM000G	REPORT CANCELLED	Report generation is cancelled at the user’s request.
TUNM000H	NO FIELD LEVEL HELP	No specific help was defined for this field.
TUNM000I	EXCLUDE SYNTAX ERROR	Syntax error on EXCLUDE command. Please press HELP for more information.
TUNM000J	FIELD NOT FOUND	Field entered is not found. Request ignored.
TUNM000K	FIELD FIXED	Field is fixed and cannot be modified. Request ignored.
TUNM000L	ALREADY EXCLUDED	Field is already excluded. Request ignored.
TUNM000M	ALREADY INCLUDED	Field is already included. Request ignored.
TUNM000R	TABLE IS EMPTY	No rows in table to export. Request ignored.
TUNM000S	SORT NOT SUPPORTED	The SORT command is not supported for this screen. Request ignored.
TUNM000Z	COMMAND CONFLICT	Line command(s) entered are incomplete or contradictory. Please respecify.
TUNM001A	COL EXCLUDED FROM VIEW	Column &CDUCSFLD is excluded from view. It cannot be shifted to.
TUNM001B	COL UNKNOWN OR INVALID	Column &CDUCSFLD is not defined or is an invalid column name.
TUNM001E	UNSUPPORTED FUNCTION	Function requested is not supported for this screen. Request ignored.
TUNM001I	ROW &CDUDTCRP to &CDUDBCRP of &CDUROWS	Row &CDUTCRP through row &CDUBCRP (including excluded rows) of &CDUROWS rows.
TUNM001J	ROW &CDUDTCRP of &CDUROWS	Top row displayed is row &CDUTCRP of &CDUROWS rows. Rows are filtered out.
TUNM002E	INSUFFICIENT STORAGE	The Dynamic Area Manager cannot obtain enough storage to function.
TUNM002I	CUSTOMIZATION CANCELLED	All changes have been cancelled.
TUNM003E	INVALID SORT FIELD	The field name entered for sort is invalid. Please respecify.
TUNM004E	ASU INTERVAL INVALID	The ASU interval must be between 1 and 180. The default is 3 seconds.
TUNM005A	CUSTOMIZATION DELETED	Customization options for this panel have been deleted from your profile.
TUNM005B	CUSTOMIZATION SAVED	The current customization options have been saved to your profile.
TUNM005C	NO CUSTOMIZATION ALLOWED	Customization for this screen has not been defined.
TUNM005E	ISPF CALL ERROR	Error in ISPF call. R15=&CDUVR15 ISPF function name was &CDUVISFN.
TUNM005I	EXPORT CANCELLED	Export processing cancelled at user’s request.
TUNM006E	LOCATE COMMAND NOT DEFINED	No locate command is defined for this screen. Request is ignored.
TUNM006I	&CDUVEMEM SAVED	Member &CDUVEMEM saved in data set &CDUVEDSN.
TUNM006J	DATA SET SAVED	Data set &CDUVEDSN has been saved.
TUNM007E	INVALID LOCATE ARGUMENT	Argument entered for locate is missing or is invalid.
TUNM007W	LOCATE ARG NOT FOUND	Locate argument entered was not found for this screen.
TUNM008E	INVALID @DAM TOKEN	'Dynamic Area Manager received an invalid token. Request is terminated.
TUNM008W	INVALID MASK	Mask field entered at cursor location is invalid. Please respecify.
TUNM008Z	TOTALS NOT SUPPORTED	This screen does not support the TOTAL command.
TUNM009A	INVALID EXPORT RECLEN	Export data set length must be at least 80-bytes.
TUNM009B	SCREEN &CDXNAME CHANGED	The format of screen &CDXNAME has been changed.
TUNM009C	SCREEN &CDXNAME SAVED	The format of screen &CDXNAME has been saved in your ISPF profile.
TUNM009E	INVALID SORT COMMAND	Sort command or sort field is invalid. Please respecify.
TUNM009I	EXPORT DATA TRUNCATED	The export data set record length is not large enough to accommodate the width of the maximum length record. Record length required is &HLRECL.
TUNM009L	INVALID LINE COMMAND	Invalid line command entered. Please respecify.
TUNM009W	INVALID COMMAND	Command &ZCMD is invalid. Please respecify.
TUNM009Y	NO FIELDS TO THE RIGHT	No fields exist to the right. Scroll request ignored.
TUNM009X	OPERATOR NOT SUPPORTED	The only operators supported for non-numeric fields are "=" and "¬".
TUNM009Z	NO FIELDS TO THE LEFT	No fields exist to the left. Scroll request ignored.
TUNM010A	Not Usable	Not a usable view when analyzing with Normalized-Active; waits not analyzed.
TUNM010B	Invalid analysis option	Invalid analysis option for batch; enter NORMAL, ACTIVE, WAIT, or ALL.
TUNM010C	Tutorial Ended	The tutorial has been ended at the user's request.
TUNM010D	Duplicate Entry	Help entry not added. A duplicate entry already exists.
TUNM010E	Help entry added	Help entry added to content help table.
TUNM010F	Help entry updated	Help entry has been updated in table.
TUNM010G	Update not allowed	Distributed entries cannot be updated; use COPY to create a user entry that will supersede the distributed entry.
TUNM010H	Content missing	Content must be specified before continuing.
TUNM010I	Invalid or missing type	Content type must be specified and be one of the following types: CSECT, MAJDELY, MINDELAY, MODULE, DB2PLAN, DB2TYPE, CICSTRAN, IMSTRAN.
TUNM010J	Invalid help name	Help member name must be specified, must be a valid PDS or PDSE name, and must not begin with TUC.
TUNM010K	Invalid help topic name	Help topic name must be a valid PDS or PDSE name.
TUNM010L	Invalid level	Help level must be specified and must be 1, 2, or 3.
TUNM010M	Invalid or missing edit	The edit option must be specified and must be either YES or NO.
TUNM010N	Invalid content	Content for type &TYPE is invalid; it must be a valid &TYPE name before continuing.
TUNM010O	Invalid CICS transaction	Maximum length for a CICS transaction name is 4; correct before continuing.
TUNM010P	Invalid &TYPE	Maximum length for type &TYPE is 8 characters; correct before continuing.
TUNM010Q	Edit not allowed	Distributed help member cannot be updated; use COPY to create a user entry that will supersede the distributed entry and add the appropriate help text to the new user level entry.
TUNM010R	Delete not allowed	Distributed entries cannot be deleted.
TUNM010S	Help update is busy	Someone else is updating content-sensitive help; please try later.
TUNM010T	Help update unavailable	Content-sensitive help is currently unavailable.
TUNM010U	No ADDHELP for column	No content-sensitive help is defined for this column or content sensitive help is unavailable.
TUNM010V	Creating new help entry	New content sensitive help entry is going to be created for the item selected.
TUNM010W	Updating help entry	Content sensitive help currently exists for this entry.
TUNM010X	Copying help entry	A distributed content sensitive help entry is being used as a model for a new user level help entry.
TUNM010Y	Nothing selected	To invoke ADDHELP, enter ADDHELP on the command line and do NOT press enter. Move the cursor to the item you wish to add Content Sensitive help for and then press enter.
TUNM010Z	Cannot update help	Error occurred when opening help for update; return code = &RC; reason code = &RS; description (may be blank) = &desc.
TUNM011A	Member &member saved	Help member &MEMBER has been saved.
TUNM011B	Blank content selected	ADDHELP processing requires non-blank content; make sure the cursor position is on a non-blank field before pressing enter.
TUNM011C	STMT not available	STMT level histogram resolution is not available; the listing is either not registered for the CSECT or the registered listing is invalid; a grouping of 32 bytes has been substituted.
TUNM011D	Entry already exists	Entry already exists in the External Data Set List; entry was not added.
TUNM011E	Data set not allocated	Monitor data set &xdsn for user &userid cannot be allocated; note TSO message issued before this message for the allocation error and reason.
TUNM011F	Unsupported List Manager	DDIO is only supported for COBOL listings.
TUNM011G	Unable to allocate DDIO	DDIO file cannot be allocated; request is cancelled.
TUNM011H	Unable to alloc ABNLPARM	Temporary data set for ABNLPARM cannot be allocated; request is cancelled.
TUNM011I	Unable to alloc ABNLREPT	Temporary data set for ABNLREPT cannot be allocated; request is cancelled.
TUNM011J	invalid data set	&LISTMGR file selected is either invalid or missing; please respecify.
TUNM011K	CWDDSUTL error occurred	CWDDSUTL ended with an RC of &result.
TUNM011L	UIF has no profiles	There are no profiles to include from the User Information File: &xdsn
TUNM011M	Listing not found	CWDDSUTL ended with an RC of &result. Check to see that the member &ddiomem is in the DDIO file specified.
TUNM011N	Obtaining list from DDIO	CWDDSUTL is being called to obtain the listings; please be patient.
TUNM011O	Registering Listing	Listing is currently being registered; please be patient.
TUNM011P	Invalid DDIO Options	Program was not compiled with the proper DDIO options; contact your Systems Programmer for details.
TUNM011Q	Registration failed	Listing registration failed with an unrecognized error.
TUNM011R	Data set is not found	Data set &allocdsn could not be found.
TUNM011S	Data set is migrated	Data set &allocdsn is migrated and per user request has not been recalled.
TUNM011T	ERASE RC=&RC	Table ERASE return code is &RC for table &tabname.
TUNM011U	Allocation failed	CA Panvalet allocation failed for the PAN subsystem.
TUNM011V	Allocation failed	CA Librarian allocation failed for the LAM subsystem.
TUNM011W	TUNLAMDA failed	CA Librarian allocation utility TUNLAMDA failed with reason of &lamda.
TUNM011X	Profile has zero runs	Cannot include a Monitor definition profile without any monitor runs.
TUNM011Y	&CSECT is reregistered	&CSECT has been successfully re-registered. &regmsg1 &regmsg2 &regmsg3
TUNM011Z	Help is unavailable	Help processing has not been initialized.
TUNM012A	Help member is not found	Help member &TOPIC is not found in the help library.
TUNM012B	Field contents invalid	This field can only contain YES, NO, or CONFIRM.
TUNM012C	Help text found	Copy requested, but help text already found in member.
TUNM012D	Not authorized	You are not authorized to use this server.
TUNM012E	Display Active failed	&TUNMSG1 &TUNMSGS &TUNMSG2
TUNM012F	Open/ CA MAT Abend	Abend occurred in Open/ CA MAT. Software record has been created, please contact Customer Support for assistance.
TUNM012G	Open/ CA MAT Error	Internal control block error. Please contact Customer Support for assistance. RC=&TUNRC RS=&TUNRS.
TUNM012H	Insufficient Storage	Request could not be processed because of a lack of storage either in the server or client.
TUNM012I	Open/ CA MAT Req Failed	Open/ CA MAT request failed.
TUNM012J	Server not found	CA MAT server &TUNSSID was not found.
TUNM012K	Server not active	CA MAT server &TUNSSID was not active.
TUNM012L	Unknown O-Tune Error	Unknown Open/ CA MAT failure. RC=&tunrc RS=&tunrs; MSG1 = &TUNMSG1; MSG2 = &TUNMSG2.
TUNM012M	Release mismatch	CA MAT ISPF Client and server have incompatible releases.
TUNM012N	Open CA MAT Cmd Error	RC=&tunrc RS=&tunrs; &TUNMSG1; &TUNMSG2.
TUNM012O	System Defaults Missing	System Defaults could not be loaded from the Global Information File.
TUNM012P	User Defaults Missing	User Defaults could not be loaded from the Global Information File.
TUNM012Q	Invalid monitor request	&TUNMSG1
TUNM012R	Error reading listing	Error encountered reading the listing - &eiorc. Listing could not be registered.
TUNM012S	CWDDSUTL missing	CWDDSUTL utility for extracting listings from DDIO could not be found.
TUNM012T	Data Error	Unable to create Histogram for Module: &MODX Csect: &CSEX.
TUNM012U	Status failed	&TUNMSG1 &TUNMSGS &TUNMSG2
TUNM012V	Unsupported List Manager	IDEAL is only supported for IDEAL listings.
TUNM012W	Unsupported List Manager	IDEAL listings require the IDEAL list manager.
TUNM012X	No Listing to Browse	Permanent listings are not available with the IDEAL list manager.
TUNM012Y	No Listing to Export	Permanent listings are not available with the IDEAL list manager.
TUNM012Z	VLSUTIL not found	CA Ideal utility VLSUTIL was not found in any allocated load library. Unable to register CA Ideal programs.
TUNM013A	User exits cleared	User exits with names that begin with TNUDCM, TNUIDL, TNUADA, or TNUNAT have been cleared from your {local\|global} monitor definitions.
TUNM013D	Prefix is not active	The &&prefix variable symbol is not part of the DSN cluster name specified for the User Information File (UIF). The USER_TABLES_CLUSTER_DSN is specified in member TUNSDEFS of the PARM library.
TUNM013E	Invalid command	An invalid command was passed to this procedure; ADDHELP is the only supported command.
TUNM013F	Cannot update help	&OWNER on &SYSTEM is currently accessing help in &GDSN.; all update functions are disabled.
TUNM013G	Help update not allowed	The security system has indicated that you are not allowed to update Content-sensitive help; all update functions are disabled.
TUNM013H	&TUNSMSG	&TUNLMSG
TUNM013I	Cannot update help	Permission to update Content-sensitive help has not been granted. Reason: &TUNSAF.
TUNM013J	Invalid command	An invalid primary command was entered. Please press HELP for a list of supported commands.
TUNM013K	Display Error	An internal display error was detected. RC=&rc RS=&rs.
TUNM013L	Invalid line command	An invalid line command was entered. Please press HELP for a list of supported commands.
TUNM013M	Not a local system	You may use the Display Active command for ASIDs running on the local system only.
TUNM013N	Not in Alternate Access	This facility is not available using MainView Alternate Access terminal session support.
TUNM013O	SQL not from Catalog	This SQL is not from the DB2 catalog. It is possible that it is not accurate - please exercise the proper caution.
TUNM013P	Continuing from bookmark	CA MAT tutorial continuing at the location bookmarked on the last exit.
TUNM013Q	Dates do not match	The date the monitored program was compiled, &csdate, and the date of compilation of the registered listing, &ldate, do not match. This may cause misleading or inaccurate information to be displayed.
TUNM013R	Compilers do not match	The compiler id from the monitored program, &progfmid, and the listing, &compiler, do not match. This may cause misleading or inaccurate information to be displayed.
TUNM013S	Sizes do not match	The program size, &psize, and the listing size, &lsize, do not match. This may cause misleading or inaccurate information to be displayed.
TUNM013T	Not authorized	Permission to update System Administration functions has not been granted. Reason: &TUNSAF.
TUNM013U	Listing from Global File	Registered program listing for &CSECT was not found in your User Information File (UIF). Listing was found in the Global Information File (GIF) - this listing is being used. Use the REGister command to register the listings locally.
TUNM013V	SERCOPY error occurred	The Changeman program SERCOPY ended with rc = &RESULT. Verify that the SERCOPY program exists in &CHMLINK.
TUNM013W	Profile has zero runs	No monitor data available to analyze.
TUNM013X	Registering &lmember	&allocdsn is currently being registered.
TUNM013Y	Need to register module	The Csect you are attempting to register requires that the module be registered. You will need the output from the final LINK-EDIT step (with option MAP=YES specified). Issue the MODule command on the Registered Listings panel.
TUNM013Z	Sizes do not match	The program size, &psize, and the listing size, &xsize, do not match. This may cause misleading or inaccurate information to be displayed. If this is a PL/I program, you may need to reregister the listing with the LIST option specified.
TUNM014A	Allocation failed	CA Endevor allocation failed.
TUNM014B	Invalid Endevor Options	Program was not compiled with the proper Endevor options; contact your Systems Programmer for details.
TUNM014C	Unable to allocate file	Endevor file cannot be allocated; request is cancelled.
TUNM014D	Unable to alloc BSTIPT01	Temporary data set for BSTIPT01 cannot be allocated; request is cancelled.
TUNM014E	Unable to alloc C1PRINT1	Temporary data set for C1PRINT1 cannot be allocated; request is cancelled.
TUNM014F	ENDEVOR error occurred	The Endevor program NDVRC1 ended with rc = &RESULT. Data set &c1msg may contain error information.
TUNM014G	SERCOPY not found	The Changeman program SERCOPY was not found in LINKLIST. Specify the load library where the SERCOPY program resides.
TUNM014H	Transaction only mode	The WebSphere monitor definition was specified without Application URL filters. Application/Via/Current class data is not available. You can use the transactions displayed to define URL filters for subsequent monitors.
TUNM014I	Unable to allocate file	The work file for the batch report job cannot be allocated; the EDIT request is cancelled. You can still use the Batch Report panel to change and submit the job. Any changes made on the Batch Report panel will be saved.
TUNM014J	Batch Report Job saved	Any changes you made to the batch report job were saved in data set &tunjcl. The profile was not updated. However, any changes made on the Batch Report panel will be saved.
TUNM014K	Batch Report Job not saved	Any changes you made to the batch report job were not saved because the work file was allocated to a temporary data set. The profile was not updated. However, any changes made on the Batch Report panel will be saved.
TUNM014L	Invalid ProtSym options	Program was not compiled with the proper PROTSYM options; contact your Systems Programmer for details.
TUNM014M	Unable to allocate File	PROTSYM file cannot be allocated; request is cancelled.
TUNM014N	Unable to alloc CARDS	Temporary data set for CARDS cannot be allocated; request is cancelled.
TUNM014O	Unable to alloc OUTPUT	Temporary data set for OUTPUT cannot be allocated; request is cancelled.
TUNM014P	ProtSym error occurred	The PROTSYM program IN25UTIL ended with rc = &RESULT. Data set &protmsg may contain error information.
TUNM020A	Jobname is invalid	Jobname &jobid was not found in the system.
TUNM020B	Job &jobid not found	&jobid was not found in the system.
TUNM020C	Job &jobid ended	&jobid has ended.
TUNM020D	&TUNMSMSG	&TUNMLMSG
TUNM020E	Switched to &jobid	PEEK is now looking at the address space of &jobid.
TUNM020F	Invalid number	Number entered was not a valid numeric.
TUNM020G	Server not active'	The Server &TUNSSID is not active or is not found.
TUNM020H	XM Call failed.	Cross Memory Peek call failed with an RC of &RC.
TUNM020I	ASID is inactive	The specified address space in not active.
TUNM020J	Peek access denied	The security system has denied your access to the PEEK processor.
TUNM030	GIF mismatch detected	The Global Information File (GIF) use by the CA Mainframe Application Tuner Server &TUNSSID does not match the GIF for this client. You can use Interactive Analysis for existing Monitor Data Sets, but should not invoke any new monitors.
TUNM031	&SMSG	&LMSG
TUNM032	&SMSG	&LMSG
TUNM033	Invalid file attributes	CA MAT only supports listing data sets with a data set organization of physical sequential (PS) or partitioned (PO) with fixed or variable length records. PDSe (partitioned extended) files are also supported.
TUNM034	Registration Severe Error	Severe error occurred during Listing Registration. RC=&result.
TUNM035	Allocation Failed	Allocation failed for listing data set. Listing registration is cancelled.
TUNM036	Listing not readable	EXECIO failed with a return code of &eiorc and failed to read the listing. Listing registration is cancelled.
TUNM037	CSECT name missing	No CSECT name is associated with the load module. The started task was not able to resolve a CSECT name within the load module. Make sure the started task has READ access defined to the security system for the load libraries for the application.
TUNM038	Invalid listing target	Listings are not available for pseudo entities.
TUNM039	&ZERRSM	&ZERRLM
TUNM040A	Invalid schedule date	The date specified is invalid. It must either be in the format of YYYY/MM/DD or one of the following symbolics: TODAY, TOMORROW, MONDAY TUESDAY, WEDNESDAY, THURSDAY, FRIDAY, SATURDAY, SUNDAY, &&TODAY, &&TOMORROW, &&MONDAY, &&TUESDAY, &&WEDNESDAY, &&THURSDAY, &&FRIDAY, &&SATURDAY, or &&SUNDAY.
TUNM040B	Invalid selection char	If you wish to select an item, you must use a forward slash (/).
TUNM040C	Invalid time	Time must be specified as a 24-hour clock in the format of HHMM.
TUNM040D	INVALID GROUPED DAYS	Either select Weekdays and/or Weekends, or specific days.
TUNM040E	SELECT A DAY	At least one day must be specified.
TUNM040F	Invalid times	Please leave no imbedded blank time ranges in the panel.
TUNM040G	Invalid days	Number of schedule days is not numeric.
TUNM040H	Mutually exclusive	You cannot specify an ending date and a day range. Please select one or the other.
TUNM040I	Invalid date variable	If date variables are used, they must be used in both starting and ending date ranges.
TUNM040J	Ending date missing	Either an ending date or number of days is required
TUNM040K	Duplicate entry	Duplicate monitor data set entry. Please respecify.
TUNM040L	Invalid date combination	If the starting date is a variable, then the ending date must also be a variable, if specified. You can use number of days the monitor is valid for, instead of an ending date variable.
TUNM040M	Invalid date range	Date range specified is invalid. Most likely, the starting date is later than the ending date.
TUNM040N	Duplicate schedule name	A schedule with the name specified already exists. Please change the name before continuing. If the name is not listed on the panel, then the schedule belongs to a global monitor profile of the same name.
TUNM040O	Invalid schedule name	The first character of the schedule name must be alphabetic or a National Character. There are also no imbedded spaces permitted.
TUNM040P	Schedule name missing	Please specify a schedule name.
TUNM040Q	TUNSDEF table missing	The System Defaults Table (TUNSDEF) is missing from the Global information file (GIF). Using defaults. Review the Installation Guide for information pertaining to the TUNSDEF table.
TUNM040R	Internal CA MAT error	An internal error occurred inside of CA MAT. Contact Customer support with the following information: RC=&TUNRS RS=&TUNRS MSG1=&TUNMSG1 MSG2=&TUNMSG1
TUNM040S	Request timed-out	The request made to the server has timed out.
TUNM040T	UIF allocate failed	Request could not be completed. The server could not allocate your UIF to process the request.
TUNM040U	No matching systems	No matching systems found. Please respecify.
TUNM040V	Group has been copied	Group &xgroup has been copied to &group. Please edit &group now or press END to return.
TUNM040W	Duplicate entry	Duplicate profile name. Please respecify.
TUNM040X	Import failed	The specified data set could not be restored.
TUNM040Y	Data set exists	&msgdsn already exists. Please specify a different name.
TUNM050A	&MSGENV error	for &MSGCMD in program &MSGPROG, rc=&MSGRC, loc=&MSGLOC
TUNM050B	&TRACPRG &TRACLOC	&TRACMSG

Tell Technical Publications how we can improve this information