|
|
|
The Storage Group Device Activity report provides the same
information as the standard Device Activity report except the
devices are grouped and summarized by the DFSMS (Data
Facility Storage Management Subsystem) Storage Group name.
Unlike the standard device activity report, which reports on
other device classes (magnetic tape devices, communication
equipment, and so on), this report is specifically designed
for the DASD and tape environment.
INTENDED USE:
The report is designed to help analyze the I/O activity, both
by device and by storage group. It can assist with
investigation of bottlenecks caused by a particular device or
storage group.
REPORT FORMAT:
This inquiry produces a listing of devices within each
defined DFSMS storage and a summary line reflecting activity
for the entire storage group. See section 3.1.1.4 for an
example of the output generated.
DATA SOURCE (file/timespan):
HARDVA at the DETAIL, DAYS, WEEKS, or MONTHS timespan.
DATA ELEMENTS USED AND CALCULATIONS:
Consult the SAS source code used to generate this report in
sharedprefix.MICS.SOURCE member:
o @RMFDSG4 - for all systems
HOW TO PRODUCE THE REPORT:
o Enter the CA MICS Workstation Facility (MWF).
o Choose option 2, CA MICS Information Center Facility
(MICF).
o Choose option 2, Database Inquiries.
o Select RMFLPL, whose Catalog Group is PERFORM.
o Complete the MICF Execution panel. (If you are not
familiar with MICF, see the MICF User Guide and the MICF
Reference Guide.)
o Complete the specification panel illustrated below.
(Descriptions of the fields follow the panel.)
+----------------------------------------------------------------------+ |-------- Post Processor Storage Group Device Activity Report -------| | Command ===> | | | | Composing Inquiry: RMFLPL - Post Processor Stg. Group Activty | | Database ===> ___________ | | Cycle(s) ===> __ - __ | | Timespan ===> ______ (DETAIL/DAYS/WEEKS/MONTHS) | | | | Data Selection: | | dd mmm yy dd mmm yy dd mmm yy dd mmm yy | | Date ===> __ ___ __ - __ ___ __ __ ___ __ - __ ___ __ | | Hour ===> __ - __ | | Zone ===> _ _ _ _ _ _ _ _ _ | | Sysid ===> ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ | | | | Summarization Break Variable ===> ________ | | Summarization Technique ===> _________ (DETAIL or COMPOSITE) | | | | SAS Subsetting Statements ===> | | _______________________________________________________________ | | | | Specify Extended Options ===> N (Y/N/R) | +----------------------------------------------------------------------+
Database - Required. No default.
Specify up to six database unit IDs (the IDs of the
CA MICS database units from which the files are read).
If CA MICS files exist in only one database unit, this
parameter is set automatically. To display a selection
list of valid database unit IDs, specify ? (question
mark).
Cycle(s) - Required. Defaults to 01.
00-99 in either data entry field; leading zeros are
inserted automatically. The CA MICS files cycle
(specify first field) or cycle range (specify both
fields) for the inquiry execution.
Timespan - Required. Defaults to DAYS.
The timespan of the CA MICS database from which the
primary input files are selected. See Chapter 3 for a
listing of file requirements by report. The CA MICS
required input files must be available at the specified
timespan.
Date - Optional. No default.
Up to two date ranges in DD MMM YY format. The first
value in each date range is the starting date and the
last value is the ending date. The ending date must be
higher than the starting date. The date ranges should
not overlap, but you can specify the higher range
before the lower range. An input observation is
selected if its date value is greater than or equal to
the starting date and is less than or equal to the
ending date of any specified date range.
Hour - Optional. No default.
An hour range from 0 to 23. The first value is the
starting hour and the last value is the ending hour.
The ending hour must be higher than the starting hour.
An input observation is selected if its hour value is
greater than or equal to the starting hour and is less
than or equal to the ending hour of the specified hour
range.
Zone - Optional. No default.
One-character zone value from 1 to 9. You can specify
up to nine zone values. An input observation is
selected if its zone value is equal to any of the
specified values.
SYSID - Optional. No default.
1-4 character SYSID value. You can specify up to ten
SYSIDs. An input observation is selected if its SYSID
value is equal to any of the specified values.
Summarization Break Variable - Optional. No default.
Data element name to be used as control-break variable.
Valid entries are STARTTS, HOUR, ZONE, DAY, WEEK,
MONTH, YEAR, and SYSID. CA MICS summarization
facilities are used to preprocess the files used by the
report programs. These facilities allow that a data
element be defined as a control-break variable, and
that the summarized file(s) are sorted so the break
variable is last in the sort key list. A single
summarized observation is then written from multiple
observations, with the same break variable value,
whenever the break variable value changes.
Summarization Technique - Required. Defaults to DETAIL.
Specify DETAIL to cause the input files to be processed
and reported in date/time order, or COMPOSITE to force
ALL occurrences of the same value of the summarization
break variable to be summarized and reported together.
See section 3.1.2.1.4 for a more detailed explanation
of the summarization control techniques.
SAS Subsetting Statements - Optional. No default.
Free-form user-supplied SAS code. During the creation
of the work files used to generate the reports,
user-defined SAS code may be included to modify or
subset the data.
IMPORTANT: No validity checking is done on the
user-defined code. If it contains syntax or logic
errors, the inquiry will either terminate abnormally or
will produce unpredictable results.
Examples of valid statements:
IF SYSID EQ "SYS1";
IF DEVTYPE EQ: "3390";
Specify Extended Options - Required. Defaults to N (No).
This parameter is used to specify extended options
parameters for the inquiry function. It is displayed
at the bottom of the panel. Specify Y to display the
Extended Options Menu. Extended options parameters are
used to perform additional selections for the report
being defined. Extended options are never required;
default values are provided. A flag will appear to the
right of this parameter if ANY extended option has been
specified. To restore the extended options to their
default values, specify R (Reset).
o Optionally, complete the extended option panel
illustrated below. (Descriptions of the fields follow
the panel.)
+----------------------------------------------------------------------+ |-------- Post Processor Storage Group Device Activity Report -------| | Command ===> | | | | Extended Options for: RMFLPL - Post Processor Stg. Group Device Rpt| | | | Storage Group (STORNAME) Selection: | | Name(s) ===> ________ ________ ________ ________ _________ | | | | or/and | | | | Range(s) ===> ________ - ________ ________ - ________ | | ________ - ________ ________ - ________ | +----------------------------------------------------------------------+
Storage Group (STORNAME) Selection:
You can specify up to six individual storage group
names or/and four storage group ranges to include in
your report. An input observation is selected if its
STORNAME value is strictly equal to any of the entries
specified in the Name(s) fields, or if it falls in any
of the specified Range(s) fields.
For example, to only produce a report for storage group
CICS and all storage groups starting with the IM
characters, you would specify:
Name(s) ===> CICS ________ ________ ________
or/and
Range(s) ===> IM0 - IM9 IMA - IMZ
USAGE CONSIDERATIONS:
This inquiry provides a user exit that you can use to perform
additional data selection from the CA MICS database. To
invoke this exit, you must first copy the shared inquiry into
your private MICF catalog, then select it for modification.
Finally code SAS statements in the SELECT macro, bracketed by
the %MACRO and %MEND statements.
The default for the SELECT macro is null. This macro is
invoked when the observations are read from the specified
CA MICS file(s). You can use it to delete observations from
the data as it is selected. For example, in a system
activity study, you might want to exclude test systems
starting with a T from the analysis. You would then code
the following:
%MACRO SELECT;
IF SYSID NE: 'T';
%MEND SELECT;
Note that you do not have to code the %MACRO and %MEND
statements, as they are already provided for you.
IMPORTANT: You must code each specified SAS statement in
accordance with the syntax of the SAS Macro Language, as
described in the SAS manuals. No validity checking is done
on the defined code. If the user code contains syntax or
logic errors, the inquiry will either terminate abnormally or
will produce unpredictable results.
************************************************************
** Note: This report cannot be produced if the CA MICS **
** database contains essential data elements only.**
************************************************************
| Copyright © 2012 CA. All rights reserved. | Tell Technical Publications how we can improve this information |