Appendix A. MESSAGES › A.1 IDMCGEN and IDMPGEN Messages
A.1 IDMCGEN and IDMPGEN Messages
+-----------------+
| I D M 0 0 0 0 1 |
+-----------------+
TEXT: +================================================
PROCESSING OF OPTIONS SPECIFIED BY PARMS
MEMBER IDMOPS BEGINS
TYPE: Information
REASON: This message is issued at the start of processing
for IDMOPS statements.
ACTION: None
REFERENCE: Section 7.3.2 of the CA MICS Analyzer Option
for CA-IDMS Guide
+-----------------+
| I D M 0 0 0 0 2 |
+-----------------+
TEXT: "control statement"
TYPE: Information
REASON: This message lists each IDMOPS statement as read
input before parameter parsing has been done.
ACTION: None
REFERENCE: Section 7.3.2 of the CA MICS Analyzer Option
for CA-IDMS Guide
+-----------------+
| I D M 0 0 0 0 3 |
+-----------------+
TEXT: PROCESSING OF OPTIONS SPECIFIED BY PARMS
MEMBER IDMOPS ENDS
+==============================================
TYPE: Information
REASON: This message is issued after all statements in
IDMOPS have been parsed.
ACTION: None
REFERENCE: Section 7.3.2 of the CA MICS Analyzer Option
for CA-IDMS Guide
+-----------------+
| I D M 0 0 0 0 4 |
+-----------------+
TEXT: >>>> PREVIOUS STATEMENT TYPE NOT RECOGNIZED BY
IDMPGEN
TYPE: Error
REASON: This message is issued if the statement type is
not one of the valid statement types defined in
IDMOPS.
ACTION: See Chapter 7 of the CA MICS Analyzer for CA-IDMS
Guide for the correct list of statements and
their options. Correct the statement in error
and resubmit the IDMPGEN job.
REFERENCE: Section 7.3.2 of the CA MICS Analyzer Option
for CA-IDMS Guide
+-----------------+
| I D M 0 0 0 0 5 |
+-----------------+
TEXT: >>>> RESPONSE VALUE NUMBER "INDEX" IS INVALID
MUST BE IN THE RANGE OF 1 TO 3600,
VALUE="VALUE"
TYPE: Error
REASON: This message is issued if the RESP statement
bucket value indicated by the message is not
correct.
REFERENCE: Section 7.3.2 of the CA MICS Analyzer Option
for CA-IDMS Guide
+-----------------+
| I D M 0 0 0 0 6 |
+-----------------+
TEXT: >>>> RESPONSE VALUE NUMBER "INDEX" IS NOT
GREATER THAN PREVIOUS VALUE, VALUE="VALUE"
PREVIOUS="LASTVAL"
TYPE: Error
REASON: This message is issued if the value for the
response time bucket indicated by the message is
lower in value than the previous one. The
buckets must specify increasing values.
ACTION: Specify the correct value for the response time
bucket in error and resubmit the IDMPGEN job.
REFERENCE: Section 7.3.2 of the CA MICS Analyzer Option
for CA-IDMS Guide
+-----------------+
| I D M 0 0 0 0 7 |
+-----------------+
TEXT: >>>> MORE THAN 7 RESPONSE BUCKET VALUES
SPECIFIED
TYPE: Error
REASON: This message is issued if you have coded more
than seven unique values on the RESP statement.
ACTION: Specify only seven response time buckets and
resubmit the IDMPGEN job.
REFERENCE: Section 7.3.2 of the CA MICS Analyzer Option
for CA-IDMS Guide
+-----------------+
| I D M 0 0 0 1 2 |
+-----------------+
TEXT: >>>> GRAPHS OPTION NO LONGER SUPPORTED. SEE
CHAPTER 3 OF THE CA MICS ANALYZER FOR
CA-IDMS GUIDE FOR MICF QUERIES THAT PROVIDE
THIS FUNCTIONALITY.
TYPE: Information
REASON: This message issued because the GRAPHS option is
no longer supported. The functionality of the
GRAPHS option is available through the MICF
queries.
ACTION: Remove the GRAPHS option from the IDMOPS member
and resubmit the IDMPGEN job.
REFERENCE: Section 7.3.2 of the CA MICS Analyzer Option
for CA-IDMS Guide
+-----------------+
| I D M 0 0 0 1 3 |
+-----------------+
TEXT: >>>> INTERVAL INVALID, MUST BE IN THE RANGE OF
1 TO 3600 VALUE="INTERVAL"
TYPE: Error
REASON: This message is issued if the value specified for
the system file interval is not in the proper
range.
ACTION: Correct the interval value and resubmit the
IDMPGEN job.
REFERENCE: Section 7.3.2 of the CA MICS Analyzer Option
for CA-IDMS Guide
+-----------------+
| I D M 0 0 0 1 4 |
+-----------------+
TEXT: >>>> NUMBER OF WORK FILE PAIRS MISSING, PLEASE
SPECIFY
TYPE: Error
REASON: This message is issued when the WORK statement
has been supplied, but the parameter for the
number of pairs is missing.
ACTION: Specify the number of desired work file pairs and
resubmit the IDMPGEN job.
REFERENCE: Section 7.3.2 of the CA MICS Analyzer Option
for CA-IDMS Guide
+-----------------+
| I D M 0 0 0 1 5 |
+-----------------+
TEXT: >>>> NUMBER OF WORK FILE PAIRS MUST BE IN THE
RANGE OF 1 TO 9, PLEASE CORRECT
VALUE="WORK"
TYPE: Error
REASON: This message is issued if the number of work file
pairs specified does not fit the valid range.
ACTION: Correct the value specified and resubmit the
IDMPGEN job.
REFERENCE: Section 7.3.2 of the CA MICS Analyzer Option
for CA-IDMS Guide
+-----------------+
| I D M 0 0 0 1 6 |
+-----------------+
TEXT: >>>> "RESP" STATEMENT IS A REQUIRED PARAMETER
IN IDMOPS. NONE HAS BEEN PROVIDED,
PLEASE SPECIFY
TYPE: Error
REASON: This message is issued if the RESP statement
cannot be found in the IDMOPS member. This is a
required statement.
ACTION: Specify a valid RESP statement in the IDMOPS
and resubmit the IDMPGEN job.
REFERENCE: Section 7.3.2 of the CA MICS Analyzer Option
for CA-IDMS Guide
+-----------------+
| I D M 0 0 0 1 7 |
+-----------------+
TEXT: >>>> MORE THAN 1 "RESP" STATEMENT HAS BEEN
INCLUDED IN IDMOPS, ONLY ONE ALLOWED
TYPE: Error
REASON: This message is issued if more than one RESP
statement has been found in the IDMOPS member.
ACTION: Remove the unwanted RESP statement from IDMOPS
and resubmit the IDMPGEN job.
REFERENCE: Section 7.3.2 of the CA MICS Analyzer Option
for CA-IDMS Guide
+-----------------+
| I D M 0 0 0 1 8 |
+-----------------+
TEXT: >>>> SMFTYPES IN IDMOPS NOT A SUBSET OF
SMFTYPES IN INPUTSOURCE
>>>> IDMOPS NO-SUBSET TYPE = "SMFTYPE value that"
"is not a subset"
>>>> INPUTSOURCE SMFTYPES = "list of INPUTSOURCE
SMF record types"
TYPE: Error
REASON: This message is issued because one or more of the
SMF record types specified with the
prefix.MICS.PARMS(IDMOPS) SMFTYPE parameter is
not present in the record types specified with
the INPUTSOURCE statement in
sharedprefix.MICS.GENLIB(IDMGENIN). The SMF
record types specified with the SMFTYPE statement
must be a subset of those specified with the
INPUTSOURCE statement.
ACTION: Review the Analyzer for CA-IDMS Guide for
instructions on the rules for coding the IDMOPS
SMFTYPE parameter and the INPUTSOURCE statement.
REFERENCE: Section 7.3.2 of the CA MICS Analyzer Option
for CA-IDMS Guide
+-----------------+
| I D M 0 0 0 1 9 |
+-----------------+
TEXT: >>>> MORE THAN SEVEN ARGUMENTS FOLLOW THE SMFTYPE
STATEMENT
>>>> ONLY SEVEN SMF RECORD TYPES ALLOWED
TYPE: Error
REASON: This message is issued because more than seven
arguments were found on the SMFTYPE parameter
line in prefix.MICS.PARMS(IDMOPS). A maximum of
seven SMF record types can follow the SMFTYPE
keyword.
ACTION: Review the Analyzer for CA-IDMS Guide for
instructions on the rules for coding the IDMOPS
SMFTYPE parameter. Restrict the list of
SMFTYPE's specified to a maximum of seven.
REFERENCE: Section 7.3.2 of the CA MICS Analyzer Option
for CA-IDMS Guide
+-----------------+
| I D M 0 0 0 2 0 |
+-----------------+
TEXT: >>>> DUPLICATE SMF RECORD TYPE FOUND AS SMFTYPE
PARAMETER ARGUMENT
>>>> DUPLICATE = "duplicate argument value"
TYPE: Error
REASON: This message is issued because one of the
arguments found following the SMFTYPE keyword in
prefix.MICS.PARMS(IDMOPS) was a duplicate of an
earlier argument.
ACTION: Review the Analyzer for CA-IDMS Guide for
instructions on the rules for coding the IDMOPS
SMFTYPE parameter. Remove or change the value of
the duplicate SMF record type.
REFERENCE: Section 7.3.2 of the CA MICS Analyzer Option
for CA-IDMS Guide
+-----------------+
| I D M 0 0 0 9 9 |
+-----------------+
TEXT: >>>> ERROR(S) ENCOUNTERED IN IDMOPS PARAMETER
DEFINITIONS, MACRO GENERATION ABORTED.
PLEASE CORRECT ERRORS AND RESUBMIT JOB
IDMPGEN.
TYPE: Error
REASON: This message is issued after all IDMOPS statement
parsing and error checking has completed, and at
least one error was encountered.
ACTION: Correct all indicated errors and resubmit the
IDMPGEN job.
REFERENCE: Section 7.3.2 of the CA MICS Analyzer Option
for CA-IDMS Guide
+-----------------+
| I D M 0 0 1 0 0 |
+-----------------+
TEXT: GENERATION OF OPTION MACROS IN MEMBER #IDMMSTR
STARTED
TYPE: Information
REASON: This message is issued when all statements have
been parsed and validated. IDMPGEN now begins
the macro and symbol generation process.
ACTION: None
REFERENCE: Section 7.3.2 of the CA MICS Analyzer Option
for CA-IDMS Guide
+-----------------+
| I D M 0 0 1 0 5 |
+-----------------+
TEXT: IDMCGEN file dependency check beginning.
TYPE: Information
REASON: This message is issued because IDMCGEN is
starting to check file dependencies.
ACTION: None
REFERENCE: None
+-----------------+
| I D M 0 0 1 0 6 |
+-----------------+
TEXT: IDMCGEN file dependency check successful.
TYPE: Information
REASON: This message is issued because the Analyzer's
file dependencies were met.
ACTION: None
REFERENCE: None
+-----------------+
| I D M 0 0 1 0 7 |
+-----------------+
TEXT: IDMCGEN file dependency has not been met:
The %FD_FIL1 file has been turned off.
The %FD_FIL2 file is turned on. %FD_FIL2 relies
on the %FD_FIL1 file to be turned on.
You must either turn on %FD_FIL1 or
turn off %FD_FIL2 before rerunning IDMCGEN.
TYPE: Information
REASON: This message is issued because when tailoring
IDMGENIN, a file was turned off. This file needs
to be turned on because a file that is dependent
on it is turned on.
ACTION: Either turn on the required file or turn off the
dependent file in IDMGENIN; then rerun IDMCGEN.
REFERENCE: None
+-----------------+
| I D M 0 0 1 0 8 |
+-----------------+
TEXT: IDMCGEN file dependency check error(s).
TYPE: Error
REASON: This message is issued because file dependencies
were not met.
ACTION: Review the MICSLOG and correct the errors
reported; then rerun IDMCGEN.
REFERENCE: None
+-----------------+
| I D M 0 0 1 1 0 |
+-----------------+
TEXT: You have turned on the %TS_CHG timespan in the
IDMSCL file.
The IDMSCL file only supports the DAYS timespan.
IDMCGEN is ignoring the %TS_CHG activation.
TYPE: Warning
REASON: This message is issued if timespans within the
IDMSCL file have been turned on when they should
not have been.
ACTION: The timespans within the IDMSCL file that were
turned on will be automatically turned off.
REFERENCE: None
+-----------------+
| I D M 0 0 1 9 9 |
+-----------------+
TEXT: GENERATION OF OPTION MACROS IN MEMBER #IDMMSTR
COMPLETED
TYPE: Information
REASON: This message is issued when all the macros and
symbols have been created by IDMPGEN.
ACTION: None
REFERENCE: Section 7.3.2 of the CA MICS Analyzer Option
for CA-IDMS Guide
+-----------------+
| I D M 0 0 9 9 9 |
+-----------------+
TEXT: SUCCESSFUL COMPLETION OF IDMPGEN, USER
PARAMETER OPTIONS HAVE BEEN ACCEPTED AND
EXECUTION CONTROL VALUES CREATED
TYPE: Information
REASON: This message is issued when the IDMPGEN job has
completed all of the necessary functions without
encountering any errors.
ACTION: None
REFERENCE: Section 7.3.2 of the CA MICS Analyzer Option
for CA-IDMS Guide
