Installation Worksheet

1

What is the job information for JOBCARD one.?
Default: 'JOBCARD1'

2

What is the job information for JOBCARD two?
Default: 'JOBCARD2'

3

What is the job information for JOBCARD three?
Default: 'JOBCARD3'

4

What is the job information for JOBCARD four?
Default: 'JOBCARD4'

5

What high level qualifier is used by your site for a new install to define all the MUF control data sets and database areas?
Limits: 1-27 bytes
Default: 'CAI.NEWHLQ'

6

What high-level qualifier is used to prefix the other SMP/E and distribution library data sets?
Default: 'CAI.SHLQ'

7

What high-level qualifier is used to prefix the SMP/E target library data sets for CA Datacom/AD Version 14.0?
Default: 'CAI.THLQ'

8

What high level qualifier is used by your site for a new installation to define all the custom libraries? Used to create CUSMAC, CUSPROC, and CUSLIB.
Limits: 1-27 bytes
Default: 'CAI.NEWCHLQ'

9

What high-level qualifier is used to prefix for the INSTJCL data set? Limits: 1-33 bytes
Default: 'CAI.HLQ'

10

What high-level qualifier is used to prefix the SMP/E target library data sets for the CA Datacom/AD Version 10.0, 11.0, or 12.0 source MUF? (Only used in the migration and fallback process.)
Default: 'CAI.PTHLQ'

11

What high-level qualifier is used to prefix the CA Datacom/AD Version 10.0, 11.0, or 12.0 source MUF control data sets, that is, LXX, FXX, CXX, and PXX? (Only used in the migration and fallback process.)
Default: 'CAI.PHLQ'

12

What high level qualifier to be used for creating the CXX backup for the CA Datacom/AD Version 10.0, 11.0, or 12.0 source MUF when migrating a database from the CA Datacom/AD source MUF to the CA Datacom/AD Version 14.0 target MUF? (Only used in the migration and fallback process.)
Default: 'CAI.CXX^BKUP'

13

What is the high-level qualifier for custom data sets used in the CUSMAC, CUSLIB, and CUSPROC data set names from the CA Datacom/AD Version 10.0, 11.0, or 12.0 source MUF? (Only used in the migration and fallback process.)
Default: 'CAI.PCHLQ'

14

What is the unit name of the device for temporary work DSNs?
Default: 'SYSDA'

15

What DASD volume serial name is to be used for the CA Datacom control data sets and CUS*/INSTJCL data sets?
Default: 'VOL=SER=DASD01'

16

What DASD type is the DASD01 volume? (for example, 'SYSDA,3380,3390,9345')
Default: 'AXUNI1=3390'

17

What DASD volume serial name is to be used for the CA Datacom index areas for the install databases and for VLS files, if needed?
Default: 'VOL=SER=DASD02'

18

What DASD type is the DASD02 volume? (for example, 'SYSDA,3380,3390,9345')
Default: 'AXUNI2=3390'

19

What DASD volume serial name is to be used for the CA Datacom data areas forDBIDXX the install databases?
Default: 'VOL=SER=DASD03'

20

What DASD type is the DASD03 volume? (for example, 'SYSDA,3380,3390,9345')
Default: 'AXUNI3=3390'

21

Work sheet items 21-24 have different forms but all use the same DBID value and are only used in the migration and fallback process.
What is the DBID to be migrated or ported from CA Datacom/AD Version 12.0 to CA Datacom/AD Version 14.0? The form is DBIDxxx, where xxx is the database ID for the database being migrated.
If migrating the database, use one of the following:
"DBID100" for CA APCDDS
"DBID161" for CA Jobtrac
"DBID162" for CA Jobtrac
"DBID430" for CA Scheduler
"DBID601" for CA WA Restart Option for z/OS Schedulers (formerly CA 11 Workload Automation Restart and Tracking)
"DBID602" for CA WA Restart Option for z/OS Schedulers (formerly CA 11 Workload Automation Restart and Tracking)
"DBID650" for CA Disk
"DBID615" for the database for CA IMS Tools

22

Work sheet items 21-24 have different forms but all use the same DBID value and are only used in the migration and fallback process.
What is the value for "PDBID" to the CA Datacom Datadictionary CA Datacom/AD Version 12.0 database name to be cataloged, so that it can be selected to be migrated or ported to CA Datacom/AD Version 14.0?
(PDBID represents a product designator plus the databse ID number, as shown in the following list.)
If migrating the database, use one of the following:
"CH430" for CA Scheduler
"L7601" for CA WA Restart Option for z/OS Schedulers (formerly CA 11 Workload Automation Restart and Tracking)
"L7602" for CA WA Restart Option for z/OS Schedulers (formerly CA 11 Workload Automation Restart and Tracking)
"DDS100" for CA APCDDS
"HD0161" for CA Jobtrac
"HD0162" for CA Jobtrac
"DMS650" for CA Disk
"ITKREPDB" for the database for CA IMS Tools
Default: 'PDBID'

23

Work sheet items 21-24 have different forms but all use the same DBID value and are only used in the migration and fallback process.
What is the value of "PBASIS" to the product basis module name? The value is the same as the "PDBID" on the first or only product database upgrade. If the product supports multiple database instances, change only the "PDBID" value on subsequent product upgrades. Ensure that the "PBASIS" value remains constant.
If migrating the database, use one of the following:
"CH430" for CA Scheduler
"L7601" for CA WA Restart Option for z/OS Schedulers (formerly CA 11 Workload Automation Restart and Tracking)
"DDS100" for CA APCDDS
"HD0161" for CA Jobtrac
"DMS650" for CA Disk
"ITKREPDB" for the database for CA IMS Tools
Default: 'PBASIS'

24

Work sheet items 21-24 have different forms but all use the same DBID value and are only used in the migration and fallback process.
What is the DBID to be migrated or ported from CA Datacom/AD Version 12.0 to CA Datacom/AD Version 14.0? The form is DBID=xxx, where xxx is the database ID for the database being migrated. It is used within the DBUTLTY steps for the migration or fallback process. Give the database ID the value used in DBIDxxx from worksheet item number 21.
If migrating the database, use one of the following:
"DBID=430" for CA Scheduler
"DBID=601" for CA WA Restart Option for z/OS Schedulers (formerly CA 11 Workload Automation Restart and Tracking)
"DBID=602" for CA WA Restart Option for z/OS Schedulers (formerly CA 11 Workload Automation Restart and Tracking)
"DBID=100" for CA APCDDS
"DBID=161" for CA Jobtrac
"DBID=162" for CA Jobtrac
"DBID=650" for CA Disk
"DBID=615" for the database for CA IMS Tools

25

What is the name of the library for the CA Datacom/AD using product that contains the DDRTVCAT basis module identified in worksheet item number 23?
Default: 'PRODAD.TARGET.LOADLIB'

26

What is the name to be assigned to the CXX for this MUF? (Instance used for new installations only.)
Default: 'CXX^NAME'

27

What is the region size?
Note: We recommend that you use the default and do not change for this installation.
Default: '0M'

28

What is the MEMLIMIT?
Note: We recommend that you use the default and do not change for this installation.
Default: 'NOLIMIT'

29

What is the data set name of the target load library for the CA Common Services for z/OS programs?
This CA Technologies product authorized load library contains service-related executable modules for the BASE and OPTIONAL Common Services.
Default: 'CAI.CACSS.CAW0LOAD'

30

What is the data set name of the IBM TCP stack DSN for SYSTCPD DD? Correlate this reference to the DSN specified by the SYSTCPD DD statement for the TCP stack. If the data set is a PDS, include a member name.
Default: 'VTAM.TCPIP.TCPIP.DATA'

31

How many tasks does CA Datacom Server need to use to communicate with MUF? The MUF gives this number of threads or tasks to CA Datacom Server to allow work to be passed back and forth between the CA Datacom Server to the MUF and back to the CA Datacom Server. Default uses 10 tasks in CA Datacom Server. This is only used for CA Datacom Server.
Default: 'DBUSERS=10'

32

What is the name of the CA Datacom Server? If using TCP/IP, it is a token value of from 1-20 unique bytes.
Default: 'SERVERNAME=TCP_DEV_R140'

33

What is the name of the application ID for CA Datacom Server? If the TCP/IP communication protocol (z/OS only) is used, APPLID=, Servername=, and TCPIP_PORT= are used as tokens to uniquely identify the CA Datacom Server Mainframe Server component (1 to 20 alphabetic characters for APPLID following normal SQL names).
Default: 'APPLID=TCP_DEV_R140'

34

What DASD volume serial number is to be used for the CAI.THLQ.CAAXLOAD VOLSER (worksheet item number 7) used for APF ADD in member AXAPFADD?
Note: If using SMS, edit this entry after running the customization steps but before running member AXAPFADD.
Default: 'DBAPF'

35

What DASD volume serial number is to be used for the CAI.NEWCHLQ.CUSLIB VOLSER (worksheet Item number 5) used for APF ADD in member AXAPFADD?
Note: If using SMS, edit this AFTER running the customization steps but BEFORE running member AXAPFADD.
Default: 'CDBAPF'

36

not used

37

not used

38

not used

39

What is the name of your Version 14.0 SMP/E target zone name?
This is used by member AD14MRAP as a sample SMP/E receive and apply job.
Default: 'CAIT0'

40

What is the unit name your site uses for Cart/Tape/Vtape devices?
This is used for the members AD14LXXS and AD14BKUP.
Default: 'TAPEUNIT'

41

not used

42

not used

43

not used

44

not used

45

not used

46

What is the name of the Assembler program?
Default: 'ASMA90'

47

not used

48

What is the name of the utility program for copying PDS data sets?
Default: 'IEBCOPY'

49

What is the name of the utility program for allocating data sets?
Default: 'IEFBR14'

50

What is the name of the Linkage Editor module for link editing?
Default: 'IEWL'

51

What is the name of the utility used for updating PDS members?
Default: 'IEBUPDTE'

52

What is the name of the utility used for copying data sets?
Default: 'IEBGENER'