Use this page to identify all compatibilities for a given Broadcom product. If maintenance is required:

A PTF section link appears under compatibility status.
Use FIXCAT HOLDDATA to aid in identifying maintenance required to support a particular hardware device, software, or function.
If found, click on the additional information link that appears under the compatibility status.

Launch Mainframe Compatibility Main Page

Compatibility/Release	6.0
No product found.
CICS TS V5R4	YES Info
CICS TS V5R5	YES Info
CICS TS V5R6	YES Info
CICS TS V6R1	YES Info
CICS TS V6R2	YES

Compatibility/Release	6.0
No product found.
Db2 V11	YES
Db2 V12	YES
Db2 V13	YES

Compatibility/Release	6.0
No product found.
JES3+ V1R0	NO
JES3+ V1R1	NO
JES3+ V1R2	NO
JES3+ V1R3	NO
JES3+ V1R4	NO

Compatibility/Release	6.0
No product found.
ZEC12	YES
z13/z13s	YES
z14/z14R1	YES
z15/z15-T02	YES
z16/z16-A02	YES

Compatibility/Release	6.0
No product found.
VPAT	TBD

Compatibility/Release	6.0
No product found.
Z/OS V2R4	YES PTFs Info
z/OS V2R5	YES PTFs Info
Z/OS V3R1	YES PTFs Info

Additional Information

No information found.

Fix Category: CA.TargetSystem-RequiredService.CICS.V5R4

 RDO definitions for Roscoe need  to have;                                
         DATALOCATION(BELOW)                                              
 for program and                                                          
        TASKDATALOC(BELOW)                                                
 For transaction                                                          
 Example:                                                                 
 DEFINE PROGRAM(ROSFCICS) LANGUAGE(ASSEMBLER) ...                         
           EXECKEY(USER)                                                  
           DATALOCATION(BELOW)                                            
 DEFINE TRANSACTION(ROS) PROGRAM(ROSFCICS) ...                            
                SPURGE(YES) TPURGE(YES)                                   
        TASKDATALOC(BELOW)                                                
        TASKDATAKEY(USER)

Fix Category: CA.TargetSystem-RequiredService.CICS.V5R5

 RDO definitions for Roscoe need  to have;                                
         DATALOCATION(BELOW)                                              
 for program and                                                          
        TASKDATALOC(BELOW)                                                
 For transaction                                                          
 Example:                                                                 
 DEFINE PROGRAM(ROSFCICS) LANGUAGE(ASSEMBLER) ...                         
           EXECKEY(USER)                                                  
           DATALOCATION(BELOW)                                            
 DEFINE TRANSACTION(ROS) PROGRAM(ROSFCICS) ...                            
                SPURGE(YES) TPURGE(YES)                                   
        TASKDATALOC(BELOW)                                                
        TASKDATAKEY(USER)

Fix Category: CA.TargetSystem-RequiredService.CICS.V5R6

 RDO definitions for Roscoe need  to have;                                
         DATALOCATION(BELOW)                                              
 for program and                                                          
        TASKDATALOC(BELOW)                                                
 For transaction                                                          
 Example:                                                                 
 DEFINE PROGRAM(ROSFCICS) LANGUAGE(ASSEMBLER) ...                         
           EXECKEY(USER)                                                  
           DATALOCATION(BELOW)                                            
 DEFINE TRANSACTION(ROS) PROGRAM(ROSFCICS) ...                            
                SPURGE(YES) TPURGE(YES)                                   
        TASKDATALOC(BELOW)                                                
        TASKDATAKEY(USER)

Fix Category: CA.TargetSystem-RequiredService.CICS.V6R1

 Roscoes'' XTPM Interface module must be defined with                      
  EXECKEY(USER)                                                           
  DATALOCATION(BELOW)                                                     
 Example:                                                                 
 *                                                                        
  DEFINE PROGRAM(ROSXCICS) GROUP(ROSCOE)                                  
  DESCRIPTION(ROSCOE XTPM INTERFACE )                                     
  LANGUAGE(ASSEMBLER) EXECKEY(USER) DATALOCATION(BELOW)                   
 *

Fix Category: CA.TargetSystem-RequiredService.z/OS.V2R4

 The following CA Roscoe r6.0 solution(S) and                             
 all prerequisites are needed for the proper operation                    
 of a CA Roscoe system on a Z/OS 2.4 operating system:                    
 PRE ( QO94870 QO99051 RO02522 RO02554 RO04636 RO12867                    
       RO22957 RO61518 RO64292 RO65153 RO84269 RO86924 RO86928            
       RO91863 RO92195 RO93745 RO97790 RO99931 SO05092 SO07467 )          
  Plus:                                                                   
       RO09914                                                            
       RO14017, RO35430, RO91818, RO91908, RO93382, RO95331               
       RO99272, SO09943, SO11316.                                         

 BTSO users should apply SO07345.                                         

 HARDWARE/DEVICE COMPATIBILITY:                                           
  Sites that utilize datasets with more than 99999 tracks                 
   should review and apply solution QO86150 for information               
   on tracks being displayed.                                             

 SPECIAL INSTRUCTIONS/NOTES:                                              
  The new system product level in ROSGBL                                  
  for MVSSPL and JESSPL is ZOS240.                                        

 NOTE:                                                                    
  After applying the solution(s) to support z/OS 2.4 clients must         
  reassemble the ROSGBL and, if EXIT5 used, ROSJES2XT.                    
  Refer to the CA Roscoe 6.0 MVS System Reference Guide for more informat 
  The CA Roscoe startup message, ROS148I, will reflect the                
  macro date of 09/03/19 or later.                                        

 NOTE: This fix is downward compatible with previous                      
       z/OS supported releases and can be applied on                      
       pre z/OS 2.4 Systems.

Fix Category: CA.TargetSystem-RequiredService.z/OS.V2R5

 The following CA Roscoe r6.0 solution(S) and                             
 all prerequisites are needed for the proper operation                    
 of a CA Roscoe system on a Z/OS 2.5 operating system:                    
 PRE ( QO94870 QO99051 RO02522 RO02554 RO04636 RO12867                    
       RO22957 RO61518 RO64292 RO65153 RO84269 RO86924 RO86928            
       RO91863 RO92195 RO93745 RO97790 RO99931 SO05092 SO07467            
       LU02468 LU10743 )                                                  
  Plus:                                                                   
       RO09914                                                            
       RO14017, RO35430, RO91818, RO91908, RO93382, RO95331               
       RO99272, SO09943, SO11316.                                         

 BTSO users should apply SO07345.                                         

 HARDWARE/DEVICE COMPATIBILITY:                                           
  Sites that utilize datasets with more than 99999 tracks                 
   should review and apply solution QO86150 for information               
   on tracks being displayed.                                             

 SPECIAL INSTRUCTIONS/NOTES:                                              
  The new system product level in ROSGBL                                  
  for MVSSPL and JESSPL is ZOS250.                                        

 NOTE:                                                                    
  After applying the solution(s) to support z/OS 2.5 clients must         
  reassemble the ROSGBL and, if EXIT5 used, ROSJES2XT.                    
  Refer to the CA Roscoe 6.0 MVS System Reference Guide for more informat 
  The CA Roscoe startup message, ROS148I, will reflect the                
  macro date of 08/16/21 or later.                                        

 NOTE: This fix is downward compatible with previous                      
       z/OS supported releases and can be applied on                      
       pre z/OS 2.5 Systems.                                              
       A reassembly of the ROSGBL for lower levels is required            
       after applying fix for z/os 2.5 support

Fix Category: CA.TargetSystem-RequiredService.z/OS.V3R1

   LU10743                                                                
 The following CA Roscoe r6.0 solution(S) and                             
 all prerequisites are needed for the proper operation                    
 of a CA Roscoe system on a Z/OS 3.1 operating system:                    
 PRE ( LU02468 LU07616 QO94870 QO99051 RO02522 RO02554 RO04636            
       RO12867 RO22957 RO61518 RO64292 RO65153 RO77806 RO82728            
       RO84001 RO84269 RO86924 RO86928 RO89680 RO91863 RO92195            
       RO93745 RO97790 RO99931 SO04056 SO05092 SO07467 SO08552            
       SO09943 LU10743 )                                                  

  Plus:                                                                   
       RO09914                                                            
       RO14017, RO35430, RO91818, RO91908, RO93382, RO95331               
       RO99272, SO09943, SO11316.                                         

 BTSO users should apply SO07345.                                         

 HARDWARE/DEVICE COMPATIBILITY:                                           
  Sites that utilize datasets with more than 99999 tracks                 
   should review and apply solution QO86150 for information               
   on tracks being displayed.                                             

  SPECIAL INSTRUCTIONS/NOTES:                                             
   The new system product level in ROSGBL                                 
   MVSSPL=ZOS310 AND JESSPL=ZOS310.                                       

  NOTE:                                                                   
   This solution is ONLY for sites running z/OS 2.1 and above.            
   Any site still running ROSCOE on any system lower than                 
   z/OS 2.1 should not apply this solution.                               

  NOTE:                                                                   
   After applying the solution(s) to support z/OS 2.5 clients must        
   reassemble the ROSGBL and, if EXIT5 used, ROSJES2XT.                   
   Refer to the CA Roscoe 6.0 MVS System Reference Guide for more informa 
   The CA Roscoe startup message, ROS148I, will reflect the               
   macro date of 07/10/23 or later.                                       


   NOTE: This fix is backward compatible with Z/OS supported              
         releases and can be applied on pre z/OS 3.1 systems.             
         This should not be applied on any z/OS system at 2.1 or lower.   
         An reassembly of the ROSGBL with older z/os level, above 2.1,    
         is still required after applying this maintenance.

Required PTF(s)

No PTFs found.
Roscoe Interactive Environment 6.0

Fix Category: CA.TargetSystem-RequiredService.z/OS.V3R1
Roscoe Interactive Environment (CRO6000)
- LU10743
Roscoe Interactive Environment 6.0

Fix Category: CA.TargetSystem-RequiredService.z/OS.V2R5
Roscoe Interactive Environment (CRO6000)
- LU02468 LU07616
Roscoe Interactive Environment 6.0

Fix Category: CA.TargetSystem-RequiredService.z/OS.V2R4
Roscoe Interactive Environment (CRO6000)
- LU00537 SO09943 SO11316

TBD	Broadcom is in the process of verifying that the product is compatible.
NO	The product is not compatible.
YES	The product has been certified and is compatible.
N/A	The compatibility is not applicable to the Broadcom product.

Roscoe Interactive Environment

CICS Transaction Server Compatibility Matrix

Db2 Compatibility Matrix

JES3 Compatibility Matrix

IBM zEnterprise Compatibility Matrix

VPAT Compatibility Matrix

z/OS Compatibility Matrix

Additional Information

Required PTF(s)

Roscoe Interactive Environment 6.0

Roscoe Interactive Environment 6.0

Roscoe Interactive Environment 6.0